1. Burning pot

The plain pot is a mud tile pot. It is the most commonly used plant container. It can be divided into two types: red and gray pots.There are various specifications, the smallest diameter is about 10 cm, generally 14_33 cm, and the larger is 39 59 cm.The water and exhaust drainage performance of the plain pot is good, which is conducive to plant growth. It is widely used in the cultivation of seedlings and the cultivation of seedlings.This kind of Flower pot is not enough. It is rough. When cultivating finished seedlings, you should try to use a small pot as much as possible so that you can place it in a slightly larger pot when displaying decoration indoors to make up for the shortcomings.

2. Zisha pot

Various flowers and plants are engraved on the purple sand basin, with a variety of styles, harmonious colors, simple and elegant, and antique beauty. It is more suitable for small leaf species for small leaf species on the indoor countertop.The disadvantage of this basin is that the water permeability of the water is slightly worse, and the appropriate species must be selected when used.

3. Plastic basin

Plastic pots are one of the commonly used plant containers for indoor leaf -viewing plants. They can be divided into hard plastic pots and soft -holding plastic basins.Hard plastic basins are generally small in size, light and beautiful, colorful, and are mostly used for viewing and cultivation, but their ventilation is poor and not conducive to growth. Therefore, it is not suitable for long -term planting.It is only used, and it must be loose, ventilated and drained multi -porous substrates with good ventilation and drainage performance.The soft plastic basin is only used for the nursery of indoor leaf -viewing plants, and is generally not used for ornamental cultivation.Can plastic Flower pots raise flowers & gt; & gt;

4, glaze basin

The glaze pot is strong and gorgeous, but the drainage ventilation performance is poor.It is often used as a pelvan, which can also be used directly to cultivate large leaf -viewing plants, but it must be equipped with loose porosity matrix, otherwise the plant growth is poor.

5. Wooden basin

The wooden basin is used to cultivate large leaf -viewing plants and can also be used to cultivate some fleshy.Its specifications can be determined according to actual needs.This kind of inside and outside of the pot can paint different colors to improve the service life and coordinate with the color of the plant.It has a light scenery, good breathability, strong water and Fertilizer, low cost, and low cost. It is suitable for planting of various flowers. In addition, it can also be determined and processed according to the shape, size and cultivation of flowers according to the shape, size and cultivation of flowers.This pot is easily rotted by the erosion of water, Fertilizer, and microorganisms, and has a short service life.

6. Cement basin

Cement Flower pot is usedCementPlaced it.It is simple, with different shapes, and moderate weight, but it is suitable for garden and balcony greening.

7. glass basin

The glass flower is not breathable and cannot be watered.The glass is transparent and you can see the internal moisture.In summer, the glass flower must be placed in a cool place.Put the water layer with a glass flower, you can use pottery grains or large light stones. This individual is casual.The glass flower is suitable for leaf insertion.

8.Porcelain basin

Porcelain pots are fired with porcelain soil, which is the best in the ceramic basin.It is bright in color, beautiful in appearance, and many varieties of color, but it has poor breathability and water seepage. It is difficult to master the wet and wetness of the pot soil with this pot.It is best not to plant flowers directly, only suitable for flowers for flowers.

precautions

In addition, there are all kinds of materials for decorative materials, such as glass tanks, vine products, stainless steel clads, etc. This type of pot is beautiful and generous, which can add a gorgeous and colorful atmosphere.But for display, not cultivation.

How big size of the Dog's foothills

If you have observed Dogs to sleep, you will find that they usually appear curled up when they sleep, but this does not mean that the Dog's nest is enough to curl up.The Dog's nest does not necessarily need to make it completely straight to sleep, but at least it must be able to lying comfortably in the surrounding position.

Choosing the size of a Dog's nest or a Dog cage should be able to turn around freely after entering the Dog, and it is best to lie down. The Dog's nest should be covered with soft and flat mats.It is a cloth cover that can be washed outside the sponge pad. The thickness must ensure that sufficient elasticity and softness can be produced.1.81.31Mi Gao is a Dog comfortable, if the indoor padsdu1.5long80Cm wide6Cm thick

Raising Dog nest or Dog cage is better

Disadvantages and disadvantages of Dog nest

Lempenar advantage

The advantage of the Dog's nest is comfortable and unlimited. The Dogs are moving, and it is also convenient to get up to the toilet in the middle of the night.In this way, the Dog's mood is more comfortable, not depressed, and usually more lively.

Disadvantage

Because there is no restriction on the freedom of the Dog's nest for Dogs. If there is no Dog who is not trained, it will be easy to destroy at home in the middle of the night, and you will urinate anywhere. The family will be more difficult to clean up.

Dog cage advantages and disadvantages

Dog Cage advantage

Let the Dog sleeping Dog cage restrict its freedom and avoid the Dogs from defecating or even demolishing the house at night.When we are not at home, we can keep the Dogs in the cage so that it can avoid it from being destroyed.It can also avoid Dogs randomly.

Disadvantage

When the Dog just started sleeping the Dog cage, it will have resistance because of fear, because there is no sense of security, it will always be in the cage, and it will always call out a lot of movements, which will make people rest well.The cage hurts the Dog from time to time. For example, the paw is stuck in the cage seam, and the Dog's nails are injured by a cage. (The quality of the cage is particularly important.

Summarize:The puppies who have just bought are more suitable for Dog cages to avoid Dogs and destruction.

What kind of choice of Dog nests

1. Square

One of the types of kernels on the market is a box -shaped Square doghouse.The surrounding of this kernel's nest is surrounded, and the shape looks like a very shallow box.Dogs can use the edges as pillows and sleep on the edges.The cushion in the middle of the Dog's nest is usually removed, which is more convenient when cleaning.

2. Dingding

The dome -shaped Dog nest, as the name implies, is a kind of top doghouse, which is usually divided into two types: semi -cover and full coverage.This Dog nest is most suitable for use in winter, and it can play well in the cold space.

3. Cushion

This is the simplest and most basic type of kernel's nest, a Mattress without edges or tops.Depending on the demand, the material of the mat will change accordingly.

Doghouse price

It depends on how much money the parents want to buy by Xinyi.The same is true for furniture. It is dazzling.In short, the price of Dog nests is also endless, with dozens of dollars cheap and hundreds of high -end.

precautions for buying Dog nest purchase

1Fabric of the kernel's nest

Most of the fabrics on the market include cotton, acrylic, and velvet. The main filling is: sponge, cotton,PPcotton.Of course, if you want to choose, the cotton fabric must be the first choice. First, it is not easy to generate static electricity because the sensitivity of the animal organs is much higher than that of humans, so try to avoid some irritating things.Harmful substances; followed by velvet cloth, it is also very warm and comfortable; acrylic's fabrics are the least recommended. Because of the low cost, acrylics are relatively cheap, but after Dog hair and acrylic contact, it is easy to knot.The best filling isPPCotton, keep warm, and can air dry quickly; secondly, choose cotton, keep warm and healthy, but it is inevitable that the Dog's nest will dip some urine or something., Keep warm and the cheapest price.

2

If it is a large Dog, you can choose the wooden kernel nest first. If it is cotton's kernels, it is best not to have too many ornaments. The simple appearance of the kernel nest is often easier to clean.Disclosure can be more convenient.Summary two points. Large Dogs try to choose wood as much as possible. If you are dirty, you can use a brush and water to directly use it. The small Dogs choose to use simple and practical to minimize the decorations. The market is mainly based on round and Square pits.

3, Pay attention to details

Nowadays, the Dog's foils are endless, and the functions are complicated and diverse.We still follow the principle of practical priority, try to choose the Dog's nest that is practical and not easy to lose, and try to buy as little color as possible, beautiful appearance but not practical.Dogs are relatively naughty. If the quality is not good, it is easy to lose, and the Dog's own vision is not good. It can not understand it if you buy it.

4Internal settings

Another thing is to talk about the settings inside the Dog's nest. Generally, you can lay a warm and comfortable cushion. There are several characteristics of the mat.It is more practical and convenient to take the old clothes at home, which is more practical and convenient.

1. What is the name on the Conference table?

When attending the meeting, some brands are usually placed on the Conference table with the names of the participants. This brand is generally called a table card, also known as a seat card and a Taiwan sign.The name, unit, position, etc.

The traditional Conference table is paper. It is only used to display the person's name and the identity of the participants. Most of them are made of temporary production.Various functions such as call services and voting services.

2. How to make a Conference table card

The production of the table card of the paper conference is not difficult. Generally, the tools such as grids, scissors, printers, color paper and other tools can be made. The specific production method steps are as follows:

1. First measure the size of the Conference table with the ruler table.

2. Then open the text processing software, design the desk brand, first insert a [text box], right -click to select the [set object format], and then change the [color], [line], [size], [board], of which the sizeConsistent with the width and height of measurement.

3. After that, fill in [Name] in the text box, such as Zhang San, change the font and size until it is suitable for the text box.

4. Because the brand's brand is divided into front and back, you need to copy and paste, and align the text box together to facilitate cutting. As long as multiple names are replicated, the text box of the original name is changed to other people's names.

5. Then print color paper with a printer. After printing, use scissors to cut along the boundary of the text box, and then insert the cutting name into the frame.

3. precautions for the production of the table plate at the Conference table

1. Select the dotted lines of the text box line, and the line color is gray. Just see it clearly when you print it.

2. The name is a space in the middle of the two words. If the name is three words, there is no need to add an air.

1. What are the materials for inflatable sofas

The Inflatable sofa is a new generation of sofa products. It is used through inflatable and is very popular because it is easy to carry and unique shapes. So what is the material of the Inflatable sofa?

1. PVC material Inflatable sofa

PVC's Inflatable sofa is currently the most common on the market. The characteristics of low cost, high strength and durability are welcomed by many consumers.The outer layer of PVC Inflatable sofa usually uses PVC environmental protection materials, and inside is steel wire or fiber material.The Inflatable sofa of this material is easy to carry and store, suitable for use in Outdoor or travel.

2. Make -proof cloth material Inflatable sofa

The outer layer of fluffyflagers is environmentally friendly velvet material, which feels soft, which can not only prevent scratches on the sofa surface of the Inflatable sofa, but also have a certain heat preservation effect.Fochrigraphn Inflatable sofa is suitable for placing indoors. It is common in family living rooms, children's rooms and other places. Avoiding the sunlight for a long time, it is more at ease.

3. nylon material Inflatable sofa

nylon Inflatable sofa has high strength and good breathability. The material is easy to carry, suitable for use in Camping and wild activities.nylon Inflatable sofa also has a certain waterproof performance, which is easy to clean and maintain.

4. Material Inflatable sofa

The material of polyester Inflatable sofa is soft, Skin -friendly, and comfortable.It is often used in family leisure rooms, pregnant women's rooms, etc., but polyester inflatable sofas are relatively not wear -resistant and need to be carefully maintained to avoid friction and scraping.

5. Other material inflatable sofas

In addition to the above -mentioned commonly used materials, there are also inflatable sofas of silk, cotton, and linen, canvas, Oxford cloth and other materials.The applications and characteristics of these material inflatable sofas are different. Consumers need to choose according to their own needs and actual conditions when choosing.

2. There are several sizes of Outdoor inflatable sofas

The size of the Outdoor Inflatable sofa generally has three types: single Inflatable sofa, double Inflatable sofa, and three -person inflatable sofas. Different sizes of Inflatable sofa have different weights. You can choose according to the size of the apartment type and individual needs:

Generally speaking, if it is a small apartment, it is recommended to use a single Inflatable sofa or a double Inflatable sofa in the bedroom, and the three -person Inflatable sofa can be used in the living room; in addition, the Outdoor operating two or three -person inflatable sofas is better.

1. Obstacle lighting

Install the lighting on the building for obstacles.Such as the flying obstacle logo on the top of the high -rise building, the navigation obstacle logo lamp installed on the buildings on both sides of the channel.Obstacle lighting should use lamps that can transmit red light. When installing obstacles, the following requirements should be met:

(1) General high -rise buildings only install obstacle lighting at the top, buildings with large horizontal area or intensive high -rise buildings, in addition to installing obstacles at its highest top, but also equipped with obstacle Lights on the top of its outside corner.Items

(2) The height of the chimney is more than 100m. In addition to installing obstacles at the top, an obstacle light should also be installed at a height of one -half.In order to reduce the degree of pollution of the barrier light at the top of the chimney, the obstacle light can be set lower than the 4-5m of the chimney mouth.In order to ensure reliability, the three obstacle Lights are generally installed into an equivalent triangle so that one of the obstacles can still see the light from the direction of the direction.

2. What are the aviation barriers

Aviation obstacles are special lamps that identify obstacles.The light -strong aviation obstacle light is Changliang. The mid -light strong aviation obstacle light and high -light strong aviation obstacle light are flashing. The flash frequency is not less than 20 times per minute and 70 times per minute.

Aviation obstacle Lights are generally divided into three types: low light, strong light, and high light strong. The vertical and horizontal distance between the aviation obstacle Lights is greater than 45 meters and its facilities. The three obstacle logo Lights can be used with each other.

A clear warning effect.

3. Under what circumstances must set up aviation barrier Lights

Aviation obstacles are special lamps that identify obstacles.The function is to show the outline of the structure, enabling the aircraft operator to judge the height and outline of the obstacles, and play a lamp in a warning function installed on the obstacle.

In order to distinguish the lighting Lights of general uses, the aviation barrier Lights are not often on but shiny. The low -light and strong aviation obstacle Lights are often on.It is less than 20 times per minute, not more than 70 times per minute.

Aviation obstacle Lights are generally divided into three types: low light, strong light, and high light strong. The vertical and horizontal distance between the aviation obstacle Lights is greater than 45 meters and its facilities. The three obstacle logo Lights can be used with each other.

A clear warning effect.

Situation 1: The high -protection of the airport is high or the ultra -high buildings and structures should be set up. All aviation obstacles and signs should be set up.

Situation 2: For artificial and natural obstacles that affect the safety of flight safety on the route and the flight area, aviation obstacles and signs should be set up.

Situation three: For the tall, tall buildings and facilities that may affect the safety of the flight, you should set up an aviation obstacle light and logo and pay attention to maintaining normal working conditions.

Fourth, setting distribution of aviation barriers

1. Obstacles The highest point and edge of the obstacle to the setting of the obstacle light (ie, the height and the width) of the obstacle.

2. If the top of the object is more than 45 meters above the ground on the ground, an obstacle light must be added to the middle layer.Consider the intermediate layer to add obstacles).When the building is equipped with an intermediate barrier light near the urban and residential areas, it should be considered to avoid making residents feel uncomfortable.It is generally required to see the light from the ground.

3. The obstacle lamps set up by the vast building complex should be seen from all aspects of the outline of the object. The horizontal direction can also be set at a distance of about 45 meters.

4. For 105 meters of ultra -high objects, facilities, or pull towers, roof tower, etc., the light -strong A -type obstacle light at the top should be set on its top, and the white flash should be set.lamp.

5. Ultra -high objects above 150 meters (such as radio and television tower, large crossing cable bridge, etc.) shall be set up at the top of the highlights and strong A -type obstacle Lights, and it should be used in conjunction with the middle and high -light strong obstacles.

6. The tower of the ultra -high voltage transmission wire should be set up with a high -light strong B -type barriers and a three -layer synchronous flash.The position of the tower is the minimum drooping point and the middle position of the two, and it needs to be located along the direction of the cable.

7. For chimneys or other similar buildings, the top obstacle light must be between 1.5-3 meters at the top. Considering the pollution of the chimney to the lamp, the obstacle light can be installed in the area below 4-6 meters (detailsSee the National Standard Festival).

8. Regardless of the obstacle light, the number and arrangement of the obstacles of the obstacles at different heights should be seen from the outline of the object or object group from all directions, and the synchronous flashes of the obstacle light should be considered to achieve an obvious warning effect.