Articles in Categorys Balcony Garden

Golden Kirin's breeding method

1. Breeding soil

Golden Kirin first needs to prepare a soil that is suitable for growth. Generally, Jinqilin is suitable for growing in soil with a loose, breathable drainage. It can be mixed with pond mud, river mud, and cornography according to the ratio of 3: 2: 1., Can make Jin Qilin grow better.

2. Growing environment

In fact, the breeding method and precautions of the golden unicorn need to be placed in a warm and humid environment. Usually, it is best to place the golden Kirin in good ventilation and adequate light.Kirin leaves are dehydrated and withered, and the temperature is controlled above 5 C in winter to prevent frostbite plants from affecting growth.

3. Water Fertilizer management

Jin Qilin likes neutral water. When watering, the water quality cannot appear acidic or alkaline.Watering should not be too much, which is harmful and unhelpful, so there must be no water in the Flower pot of Jinqilin, otherwise the rotten roots, rotten stems and even the entire plant will rot.Jin Qilin can pour water once every 6 to 7 days during the strong growth period, basically to see dry and wet.Watering in summer can be more frequent and poured once a day, but do not pour it through; basically do not dry or pour in winter; pay attention to drainage during the rainy season.Note that the temperature of the watering cannot be too different from the room.Jin Qilin needs to apply some base Fertilizers when planting. During the growth period, it can be fertilized once a month, and some flower Fertilizer can be applied to promote flowering during the flowering period.

4. Method

Golden Kirin generally breeds with eggs. It also has the difference between male and female. Each year, Jin Kirin can produce 50 eggs. Put the golden Kirin egg in water, control the temperature around 20 C, wait for 15-30 to wait 15-30The sky can hatch the golden unicorn, and the general reproductive survival rate is very low.

5. precautions

Golden Qilin needs to turn the basin to change the soil every 1-2 years, otherwise it will gradually wither, and Jin Qilin is not cold-resistant. At a temperature below 5 C, it is easy to frostbite.The temperature is controlled above 5 C to make Jinlin safely overwinter.

What to do if Jin Qilin rotten roots

After Jin Qilin rotten the roots, first remove the plants with soil balls from the pot, cut off the damaged root system, soaked in the 0.1%potassium permanganate solution solution, and dry the pot in the shade.Place it at the bright scattering light to control watering. After the new leaves are germinated, normal management is performed.In addition, after germination, 0.1%perplexed dihydrogen phosphate solution is applied once a week.

What grass is the lawn of the football field

The lawn of the football field is also called the football field artificial grass. It is an artificial grass used to reduce the maintenance of real grass and adapt to climate change. The standard football grass is based on the characteristics of football and FIFA (FIFA ) The technical standard requirements are specially used for artificial grass products laid by major football venues. 40 As well as 50 As well as 55 As well as 60 As well as 64 These different specifications of millimeters are long grass. At present, football grass on the market generally uses high -durable polyethylene grass fibers.The interaction between the interior has strict requirements.

1. Nature grass

Meet several conditions such:

In order to reduce the probability of the athlete injury as much as possible, the grass must be soft;

In order not to affect the rebound rate of the ball, the elasticity of the grass grass is also good, otherwise the players will be troubled;

The most important point is that the ability of the lawn grass grass grass to move and trample is very powerful, and it must also have strong recovery capabilities, drought resistance, cold, insects, diseases and other abilities.

Category Category: Divided into cold seasonal gay and warm seasonal garden grass.Different garries are used in different seasons.

China:

Northern China usually uses a cold seasonal lawn to build a stadium, such as early cooked grasses (POA PRATENSISL. ), Perennial rye grass ( lolium peennel. ), Gao Matta ( FESTUCA Arundinal. ) Types.Among them, Gao Latto's stadium in China, especially the low operating costs, is very common. It is the most drought -resistant and trampled grass type in cold seasonal lawn grass.Fertilizer response is sensitive and has good anti -salt -alkali ability.It is the preferred grass species with low management level and poor soil.In contrast, the perennial rye grass is more coquettish, and it is very sensitive to the low temperature, but this product is resistant to trampled on and grows fast.

Southern China generally uses warm seasonal lawn grass to build a stadium, such as Dog roots (Cynodon Dactylon (L.) Pers. ). zoysia japonicasteud. To.The former is known as the warm -seasons of lawn grass grass grass grass "Furniture", which is widely used in various stadiums, golfins, and parks in the south.As for the strands of grass, it is very "resistant to exercise".However, there are also hard injuries with hard texture and short green period.

European and American:

Europe, South America, etc.The lawn grass adopted by "football developed countries" is actually the same as species as species. 2014 The Brazilian World Cup in the year is no exception. As for why the lawn of foreign league is mostly like carpets, and some domestic stadiums are like vegetable fields. This is a problem in maintenance, or failed to choose the right grass.

Second, artificial grass

Characteristic

1 , High simulation, soft grass fiber, and no harm to the Skin;

2 , Strong wear resistance, long service life;

3 , UV prevention, corrosion resistance, mildew, and environmental protection, no pollution, non -fading;

4 , football speed, rebellion and natural grass are almost consistent;

5 , Good breathability and drainage performance;

6 The excellent traction allows athletes to accurately judge the direction of the ball;

7 There are few seams and no traces.

Specification

Row spacing:3/4 As well as 1/2 As well as 3/8 inch

Cao High: Net -shaped40 As well as 50 As well as 55 As well as 64mm (-2mm)

Volume width:4.00m (-2mm)

Material: High -durable polyethylene grass fiber

glue: butyl benchain

advantage

1 The excellent performance of the artificial grass has excellent elasticity and real grass sense, and the movement on the Artificial lawn has the feeling of natural lawns.In particular, the strength tolerance of the movement of artificial grass is unmatched by natural lawns.The product can be used all day, does not fade, does not deform, durable, and is often new.

2 , To ensure that sports and healthy artificial grass are made of non -toxic polymer materials, bacteria, molds, and viruses are not parasitic.The laying of artificial grass is isolated from the direct contact between the human body and the soil surface, preventing the soil from polluting the human body.The appearance of the artificial grass is flat and soft, and the athletes can feel the safety and comfort of natural grassland.

3 It is suitable for a variety of basic artificial grass and permeable, which is easy to lay on the basis of cement or asphalt concrete. It has low requirements for the foundation and is not afraid of cracking.

4 , Daily maintenance Simple Herbal Clasform does not need to be supplemented, trimmed, poured, fertilized, removing weeds, and insect -proof pests. You only need to rinse water to remove dirt. You can save a lot of water and maintenance costs every year. The daily maintenance is simple.

Scope

The construction of football clubs, stadiums, colleges and universities, colleges and universities, primary and secondary school professional football fields, and professional football teams and training venues.

What football shoes wearing artificial turf

1 As well as TF Shatter

TF Barking turf It is commonly known as "broken nails", which is suitable for artificially laying garrant venues.For ordinary golfers, TF Osoles' football shoes are most suitable for artificial grass fields with high quality in China, that is, "Carpet grass", and most of the cement fields and plastic venues. It can be said to be the most practical and most widely used.Usually, you can not only conduct daily training, play a small field with friends, but also play the positive game. TF The fine sinking shoe nails of the outsole will not bring obvious grip, but will reduce the burden on the knee.

2 As well as AG artificial grass field

AG It refers to artificial grass venues (Artificial Grassground) The length of the nails is moderate, the number of nails is dense, and it has a good grip. At the same time, it can reduce the rubbing force of artificial grass gums to the load caused by the knee.Because the domestic playgrounds are mostly artificial grass fields, so AG Large football shoes are particularly popular in China, and AG The solidity and durability of the bottom are relatively better. adidas Even for China's football market, it has been retained on some shoes AG Version.

3. IC/in rubber flat bottom

It is Indoor Court. The sole is a rubber flat sole, suitable for indoor football fields and very poor Outdoor artificial grass venues.The wooden floor of the indoor sports Tube is very Smooth. If you wear a sneakers with nails, when you turn around, the strength will be concentrated on a few nails under your feet.Wear the IC/IN type of rubber flat shoes.

What football shoes should we wear other ground

1 As well as SG soft grass

SG It's soft grass ( soft group ) English abbreviation mainly refers to the soft and slippery natural grass field. This kind of nails are made of steel, or magnesium and aluminum alloy materials.Playing the domestic artificial grass or other venues, and the domestic amateur football games are not allowed to wear a sneaker wearing metal shoes. Therefore, the sneakers of this top European league player can only be collected.

2 As well as FG Stiff grassland

FG It is a hard grass ( firm group ), General, SG and FG In addition to the difference, the difference is based on the difference in the softness of the natural grass field.Some high -quality natural grass in China are still suitable FG Shoe nails, but there are too few venues. FG Shoe nails are generally long, because of the long length FG The design of the shoes is very beautiful. The amateur enthusiasts can't help but experience the experience. They often use the method of nailing to make the nails shorter to the court that is suitable for artificial grass. OtherwiseIt hurts the ankle.

3 As well as HG Hard grass

HG Refers to hard grass ( Hard Group ), Such sneakers can play football in some grassland with hard mud or gravel.Generally speaking, HG There are no high -end versions, but more low -end sneakers. The material is average, the price is low, and it is suitable for amateur competitions.Many Japanese football stadiums are stiff and grassy, which is very suitable HG Shoe nails, so mizuno There are many football shoes HG The version of these is also determined by its domestic venue conditions.

1. How to choose lamps on road lighting

Road lightingThe quality depends on:

1. The brightness of road lighting.That is, there is enough strength to ensure that the vehicle drivers and pedestrians can see the situation around the roads on the road, pedestrians, vehicles and roads.

2. The uniformity of road lighting.That is, the distribution should be roughly uniform.

3. The degree of glare interference.That is, effectively controlling the harmful effects of glare on vehicle drivers and pedestrians.

4. The guidance of lighting.That is, proper settings are made according to the conditions of the pavement, so that vehicle drivers and pedestrians can effectively obtain information such as the direction and tilt of the road ahead, which is especially important for many roads and cross -port roads.Reasonable application of lamps can prevent glare.

Common lamps:

Littors for road lighting include high -pressure sodium lamps, low -pressure sodium lamps, polar Lights, gold halogen, fluorescent lamps, new type of Suming street lights, etc.Candidates, high -pressure mercury lamps, and low -pressure sodium lamps have gradually been eliminated due to the performance defects of light sources.Littors should use light energy reasonably to prevent glare.The light emitted by the lighting should be irradiated along the required angle, falling into the specified graphic on the road, the light is evenly distributed, the road surface is large, and the glare is small.In order to reduce glare, light control can be controlled above the maximum light.

2. Road lighting device selection

Lightsourceselectselect

The selection of light sources should comply with the following regulations:

1. Expressway, main roads, secondary roads, and branches should be used for high -pressure sodium Lights;

2. Motor vehicles and pedestrians in the residential area should adopt high -pressure sodium lamps or small -power metal halide lamps;

3. Merchant -vehicle traffic roads with high color recognition requirements for color recognition can be used in the city center and business centers. Metal halide lamps can be used;

4. The sidewalks on both sides of the pedestrian street, the pedestrian roads, and the traffic roads on the commercial area may adopt a small -power metal halide lamp, a fine pipe diameter fluorescent lamp, or a compact fluorescent light.

Road lighting should not use town flow high -pressure mercury lamps and incandescent lamps.

Outdoor lighting lamps and its auxiliary device selection

Motor lane lighting should adopt functional lamps that meet the following regulations:

1. Expressway and main roads must be intercepted or half -light lamps;

2. Half -light lamps should be adopted by the secondary road;

3. The branch road should be half -light lamps.

The non -motorized lanes that are necessary to set up lamps separately should be combined with functionality and decorative lamps that are necessary to set up Lights alone.When the decorative lamps are adopted, the on -light light ratio should not be greater than 25%, and the mechanical strength shall meet the provisions of the current national standard "General Safety Requirements and Experiments of the Lantern Festival" GB7000.1.

When using high rod lighting, according to the characteristics of the site, you should select a pan -light or interception lamp with appropriate power and light distribution.

When a closed road lighting is used, the protection level of the light source cavity should not be lower than IP54.The roads and venues of severe environmental pollution and difficulty in maintaining difficulties should not be lower than IP65.The protection level of the lamp appliance cavity should not be lower than IP43.

Activities or places with high corrosive gases such as acid -base in the air should adopt lamps with good corrosion resistance.

Large bridges such as traffic motor vehicles that are susceptible to vibrations are prone to vibration. The lamps adopted should meet the current national standard "lighting General Safety Requirements and Experiment" GB7000.1.

High -strength gas discharge Lights should be equipped with energy -saving inductors, and light sources with smaller power can be equipped with electronic ballasts.

The installation distance between the high -strength gas discharge lamp, the installation distance between the ballast and the light source should meet the product requirements.

Soybean planting

planting technology

1. Select planting

There is no big difficulty when choosing seeds. You only need to choose the large and full seeds. It is not as dry and dry.

2. Treatment

Gan the seeds before sowing, and the seeds in the dry state can better germinate.Before sowing, mix the seeds and stir with 0.1%-0.2%.

3. Soil

The soil plays a vital role in the growth of soybeans. Before planting, it must be sorted out by the soil. It is best to cultivate more than 20 cm. There are no other crops, and the soil should be fine.

4. Sowing

3 to 4 capsules are planted at one time when sowing, which can ensure the survival rate and survival rate of planting.The gap between the sowing is about 30-50 cm. Wet the water of the nursery with water. After the seedlings are sowed, cover the seeds with soil.

5. Management

After the planting is completed, it must be managed by it, and weeding is a relatively important job, because if weeds grow too strong, they will compete for the various resources required for its growth.The most common method of weeding is spraying the pharmaceutical agent, and try to make it as soon as possible.

Broad bean planting

planting technology

1. Select planting and sowing

When choosing broad bean seeds, you should choose excellent seeds with high yield and no disease.Before sowing, dug the land to plow to make the land softened. This is conducive to the root expansion of germination to form a root tumor, and then the use of rhizoplasses can increase yield.The method of inoculation of soil can be used to take about 100 pounds of soil in the soil that has grown in broad bean, and sprinkle it in the ditch during sowing.

2. Seedling management

Pay attention to the seedlings during the seedling period, and make corresponding control methods according to the situation of the seedlings.After sowing, cover with soil and cover the straw to maintain the temperature and humidity.In the middle of the growth period, it is necessary to prevent the prevention and treatment of pests and insect pests, deal with the onset plants, and remove the diseased body and weeds and destroy them.Spray pesticides for diseases and mice, control water, and organize branches.To ensure the normal development of the plant.In the later period, the plant's needs for water, control the density, and maintain the light transparency of the ground.

3. Following the Fertilizer and watering

After sowing, pour the water in time to maintain the required water, so that it can promote the early germination and seedlings.After sowing, the soil should be compacted to prevent the planting of the plants upside down.When you grow young leaves, you can appropriately apply small beam of nitrogen fertilizer, and during the growth period, you must apply phosphate Fertilizer and Potassium fertilizer.When pods, you should apply more trace elements, which can reduce the phenomenon of falling flowers and drop pods and achieve high yield.In the early stage, it is mainly necessary to ensure drainage and ventilation, otherwise the flower pods will fall and the Beans are dry.

4. Mid -cultivation

Check it in time after emergence.During the seedlings period, weeding should be cultivated frequently, and the soil auction should be thickened to prevent the upside -down phenomenon.Pay more attention to the seedlings of seedlings before and after the flowering period. The branches of broad beans are difficult to pod. The excess branches should be removed to absorb nutrients for the trunk, increase the result rate, and increase the full rate.

Pea

planting technology

1. Selected good varieties

You can choose to plant species such as Zhongnao No. 4, Zhongni No. 6, Baihua Pea, Doujian No. 1, Pod Eater 1 Pea No. 1, and American Bean Seedlings.

2. Select the plot

Vegetable peas are cool, but they are not resistant to high temperature, frost, drought, waterlogging. The soil is required to be moist but does not accumulate water.The period temperature needs to be maintained at 15-20 C, which is conducive to promoting flowering and pods.

3. Plant specifications

After plowing the soil, it is necessary to determine the width according to the characteristics of the variety and the drainage of the soil. The high -straw varieties are 1.5 meters, and the seeding of 2 rows of the gap is 2 meters.The variety is 2.5-3.5 meters, and 6 rows of seeding are sowed.

4. Sowing period

(1) Sowing can be sown in mid-to-late October. According to the row spacing of 40cm, the plant spacing is 20cm, the acupuncture points per acre are 2-3 capsules, and the amount of sowing per acre is 10-15 catties. Seedlings should be appropriately planted.

(2) The high-straw sweet pea, high-straw soft pod pea, according to the row spacing of 70-80cm, and 30cm of plant spacing, convenient for later management, mid-cooked dwarf varieties such as mid-pea No. 4 and Zhong Pea 6, you can choose to choose fromSeeding in late November, the amount of sowing per mu is 20 pounds, according to the row spacing of 30-35cm, the plant spacing is 10-15cm, and the amount of sowing per hole is 2-3 capsules.

5. Applying full Fertilizer

5,000 catties of rotten Fertilizer, 20-30 catties of potassium chloride, 50-60 catties of calcium phosphate before sowing before sowing, you can choose or acupuncture, or you can apply 60-80 catties of triple yuan Compound fertilizer to grow in branches and leaves. During the vigorous period, every 10 days, you can apply rotten Organic fertilizer.

6. Post -management

When the plant grows to 30-40cm, a few bamboo poles can be inserted in the pot soil. Direct vegetable peas can be climbed and grow. During the period, the stems and leaves should be evenly distributed.Bare, white powder, brown spot disease, root rot, withered disease, etc., immediately remove the diseased leaves, remove the diseased plants, and concentrate on fire for burning.

Mung bean planting

planting technology

1. Fertilizes on the ground

mung beans should organize seedbeds in advance before planting, probably about a week in advance.Dig deeper when organizing the soil, so that the pests in the soil can be eliminated, sprinkle some base Fertilizers in moderation after turning, and then flatten the seedbed.

2. Sprinkle seeds

Before planting, mix the seeds and resistance agents and stir it, so that the seeds should be covered with pharmaceutical agents to prevent diseases and insect pests.Dig a small hole every 30 to 50 cm during planting and sprinkle 3 to 4 seeds.Then sprinkle with a Compound fertilizer next to the small hole to cover the soil, which is conducive to the seed germination.Wait for 4 to 5 leaves when they are transplanted.

3. Later maintenance

After the transplantation is survived, weeding should be performed to avoid the phenomenon of weeds and plant disputes.In addition, it is not necessary to fertilize in its growth process. If it is sufficiently fertilized, it will lead to crazy growth and affect the flowering period. At that time

Red bean planting

planting technology

1. Fertilization

Red Beans need nitrogen fertilizer. Although there is a nitrogen in root tumor, the increase in farmhouse Fertilizer has a significant increase in yield. Especially in an appropriate amount, phosphorus and Potassium fertilizer are more significant.During the Fertilizer of Fertilizer, during the birth of Chilou, it can chase the speed and phosphate Fertilizer 5-6 days before flowering, which can promote the increase of flowers and prevent flowers and pods.

2. Management

In order to promote the developed root system, the red bean seedlings should be cultivated more and loose soil, and it is also beneficial to the growth of tumors.When it grows strong after flowering, it can be properly penetrated to remove invalid flower branches, so that nutrients are concentrated to pods, and the seeds are full.Before and after flowering, the most time -needed period of red Beans. At this time, water is short of water, which will cause a large number of flowers and pods.Therefore, water should be watered in time.Chi Doudou grows up in the early stage of the growth of aphids and red spiders, and in the middle and late stages of preventing and controlling heartworms to prevent pods.

Bean plantation

planting technology

1. Seedling management

(1) Temperature: The seedling period of vegetable Beans is about 25-30 days. The main tasks of the seedling management are temperature management. The temperature in the shed in the cauliflower is kept at 20-25 C during the day. , 2-3 days can be used for seedlings, and the leaves can be expanded in about 7 days.

(2) Rectifying the Fertilizer: The planting plot must be used for more Fertilizer. For medium Fertilizer plots, every 667 Square meters can be applied to a sufficient rotten Organic fertilizer 2500-3500 kg, and the calcium phosphate 15-20 kg.After fertilization, it can be turned into a deep. This can promote the development of the root. The depth of the soil must be more than 25 cm. After the rake is flattened, the north-south direction is made into 1.1 meters wide.

(3) planting: 1 day before planting, it is best to pour water for vegetable bean seedlings once, so as to prevent the root cause of injury when the seedlings are crushed.planting should be carried out on a sunny day, and when the vegetable bean seedlings are taken out of the seedbed, be careful.The row spacing is 50-60 cm, and the plant spacing is 40-45 cm.

2. Management management

(1) Temperature management: The temperature is maintained at 15-20 C during the day, and the temperature at night is maintained at 12-15 C. After 5-7 days, the temperature gradually increases the temperature.The temperature during the day is kept at 20-25 C, and the night is maintained at 15-20 C.At this time, the plants will give birth to new roots.

(2) Breaking: The second job of the pumping period is to prepare in a timely manner. Because vegetable Beans are vine plants, during the growth process, other objects need to be used to grow up.When the plant grows 3-4 pairs of true leaves, it is necessary to use a bamboo pole to build it, which is not only conducive to the growth of vegetable Beans, but also facilitates future management and picking.

(3) Fertilization and watering: The last job of the dumping period is fertilization and watering. When the plant grows 6-7 pairs of leaves, pump water once, combined with watering every 667 Square meters, pursue dilate. 15-20 kg, this can promote the pump.

Prevention and treatment of pests and insect pests

1. anthracnose

Prevention and treatment method: Sprinkle 75%percormic wettable powder 600 times liquid at the beginning of the onset, or 80%anthrax blessing wettable powder 800 times liquid, or 70%Daisen manganese zinc wettable powder 400 times liquid, or 25%bromine (Carbon special) 500 times liquid of wettable powder, or 70%methyltoobo wettable powder 1500 times solution, etc. for prevention and treatment.

2. Rusty

Prevention and treatment method: spray 15%powder rust rattra 1000 times liquid at the beginning of the onset, or 600 times liquid of 75%peribiloburate cleaner wettable powder, or 25%of the enemy forces 2000 times liquid, or 200%liquid of 12.5%moltidium azool. Or 70%sulfur-manganese zinc wettable powder 600 times solution, or 12.5%high-Paulo wettable powder 4000 times liquid, spray once every 10 days, 2-3 times in a row.

3. Root rot

Prevention and control method: Apply to the farmhouse Fertilizer with sufficient rotten and rotten; digging the drainage ditch and the planting of high compartment; strengthen the cultivation of the middle cultivation and keep the soil loose, but do not hurt the roots.At the beginning of the onset, spray 70%methyl sulfuric molten wettable powder 800-1000 times liquid, or 35%liquid dystonic wettable powder 800 times liquid, or 53.8%can kill 2000 dried floating agent 1000 times, or 20%20% Diobacterial wettable powder 600 times solution, or 600 times solution of 75%peribiloburate wettable powder, or 75%of the 1500 times liquid of 75%of the enemy Katson soluble powder, etc., once every 7-10 days, 2-3 consecutive times, and 2-3 times. Focus on spraying stem bases.

4, gray mold

Prevention method: If you find that sporadic diseases are 1200 times liquid with 40%gray mold cleansing agent, or 50%solution of fungicular wettable powder, 600-800 times liquid, or 1500 times liquid of 50%rotten and wettable powder, or 50, or 50 %Motimer's wettable powder 1000 times liquid spray, spray once every 7-10 days for 2-3 consecutive times.

5. Douyo

Prevention and control method: Black light lamps seduce pods, beano adults, and timely remove flowers and pods. Use 55%special killing crickets per mu with wettable powder 30-40 grams of water and 40-50 kg, or 5.7%fluoride chloride 1000-2000 times solution, or 2.5%kung fu emulsion 2500 times liquid, or 5%Ruizi special suspended suspended floating floating A dose of 2500 times liquid, or 5%inhibitory prosthetic oil 1500 times solution and other spray prevention.Spray once every 10 days from the current bud, focusing on spraying flowers and tender pods.

6. aphid

Control method: Use insecticidal Lights, color plates to seduce or use silver -gray film to avoid aphids.A frequency vibration insecticidal light is installed with 3.33-4.00 hectares, and the interface is 1.2-1.5 meters from the ground, and the insect Bags are cleaned once every 2-3 days.The yellow board is placed in a chessboard in the field, and 30-50 yuan per acre is placed at the highest point of the lower end of 15-20 cm.In the early stage of the occurrence of 10%pheopacrid wettable powder 1500 times, or 50%anti -aphidal wettable powder 2000 times liquid, or 1500 times liquid with 3%hydromidine, or 500 times solution of 0.2%albumine water, etc. Spray control.

Cowpea

planting technology

1. Land selection

The cowpea itself is more resistant to barren, so the requirements for soil are not high. General soil can be grown, but for the output and quality, you should choose soils with flat grounding, sufficient light, good drainage, and good breathability.In order to promote the growth of cowpea, before planting, it must be rectified, loose soil, and favorable for the growth of cowpea. If the soil Fertilizer is insufficient, the base Fertilizer can be applied to supplement Fertilizer. Generally, 2,000 kg of Organic fertilizer is applied per acre.

2. Sowing time

The warm climate of cowpea can be planted in spring to autumn. It can also be planted throughout the year through greenhouse technology. Generally, it is planted at 2- August. The temperature at this stage is suitable for the growth of cowpea, but it is from March to July.optimal.However, the climate and environment in various places is different, so when sowing, you must be carried out according to the local climate conditions to avoid the low temperature season.

3. Sowing

Sowing must first choose a variety of excellent quality. When sowing, the on-demand method is generally used. Open the acupoint by 40 50 cm according to the plant line, 2-grains per hole, and the soil can be covered by 1-2 cm after sowing.After covering the soil, water the water, and keep the ground film insulation and moisturizing to facilitate the emergence. However, it is necessary to pay attention when live broadcast in summer. It should not be covered with ground membrane to avoid the failure of the seeds to cause the seeds to germinate.Water, keep the soil moist to make it out.

4. Field management

Pay attention to moisture management in the early days of sowing and transplanting to ensure the emergence or survival rate. Pay attention to the time seedlings and the seedlings should be fixed when growing 3-4 slices of real leaves. Generally, two strong seedlings are left per acre.Make up seedlings in time to ensure Qi seedlings.Before pumping, it is necessary to settle in time to ensure good the field permeability. At the same time, pay attention to removing old leaves and yellow leaves to improve ventilation and breathable fields.After the seedlings are settled, they should be chaocated in time. A large amount of nutrients are required for the dumping period and the fruiting period.

Sword bean planting

planting technology

1. color

Choose in sandy soils with good drainage and irrigation functions. When the land, you need to make a monopoly gap when the entire land. The width of each ridge is about 30 centimeters, which can ensure that the drainage in the field is Smooth.Based on base Fertilizer, usually sprinkle a layer of livestock on each ridge.

2. Sowing

When sowing, the acupuncture is sowing, and the acupuncture points are dug at a distance of 40 centimeters at a distance of each plant, and then two to three seeds are placed in each hole.Can.

3. Fertilization

After the knife bean seedlings break out, we will be able to prepare weeding and fertilization. Generally, about one week after the seedlings are out of seedlings, we will cultivate it once.Fifty pounds of Compound fertilizer, fifty pound of Potassium fertilizer and thirty pounds of phosphorus Fertilizer can be poured in water.

4, settlement

Create a bracket next to each plant, then connect some ropes on the bracket, and then support the bean seedlings to the shelves to let them crawl and grow along the rope along the rope. This will not only increase the harvest of the output andThe daily management of the field is convenient.

Prevention and treatment of pests and insect pests

1. Root rot, epidemic, rust, white powder disease

The commonly used control methods are to spray the use of enemy Katsatsu, Bacteria, Daisen Zinc, and methyltotobadin. Spray every ten days and three times.

2. Aphids, South American spectrum, smoke, and aphids

40%liquid 40%liquid can be used, or 800 times liquid with the duves of the enemy.The South American spotted flies and smoke panels can be controlled with 10%imidacloprid wettable powder and 20%rice full suspension.

Lentil

planting technology

1. planting method

Multi -row of late spring live broadcast, the tender pods were harvested before the summer and autumn to the morning cream.Single or with corn, use corn straw as a bracket, or use it with garlic, can also be planted on the edge of the field.

2. Select excellent varieties

Select good varieties according to cultivation conditions.The existing lentils are divided into three types: white lentils, green lentils and purple lentils.

3. Field management

(1) Management of water and Fertilizer: There is less water during the seedling period, and more water needs to be extended after stretching and pods.Generally, 1-2 water is poured for a long time, and the flower pod stage is poured in about 10 days without rain.After watering, weeding is removed, combined with topdressing to prevent falling flowers and pods and long -term.Mid -cultivation should be shallow to prevent root injury.Organic Fertilizers such as rotten chicken manure can be applied before pods.After pod, a small amount of Chemical Fertilizer is applied.

(2) Bringing the vines and pruning: Before pumping, you must fight, or use a rope to attract the vines and go to the house after pumping.When the main vines are 5-6 compound leaves, the top of the blades will promote the multi -hair vine. When the side vines are 3 to 4 leaves, they can be topped.Generally, if you are cultivated with a hedge or human character frame, you can promote precocious pods when the stem vines grow to the top of the frame.

Prevention and treatment of pests and insect pests

1. Leonue rust, brown spot disease

Prevention method: Using 70%methyl sulfurus 100 grams or 37%phenyl methyl o'cone 20 grams of water 60 kg of water spray prevention and control.

2. Leonnel night moth, small gray butterfly and smoke green worm

Prevention method: 3.3%Avi high chloride 15-30 grams or 30%Aviwei Poisonous death 40-60ml of water 60 kg of spray is controlled.

Ratto sofaIs the rattan sofa practical?How much is rattan sofa

Rattan sofaIs it practical?

Features of rattan sofa-Select

Like all furniture, bamboo vine furniture is also very particular about materials selection and material, which is one of the characteristics of bamboo and vine furniture.bamboo rattan furniture is very particular about the choice of bamboo. At least, the bamboo age must be more than three years, and it is best to be the middle bamboo garden.For skilled workers, judging Zhu Ling is a piece of cake. You only need to grab the bamboo to shake to judge his age.After selecting the ingredients, you need to distinguish it according to the type of product made, and type six inches according to one foot."The basic algorithm is put in good ingredients.

藤编沙发

Features of rattan sofa-Environmentally friendly green

The characteristics of natural bamboo and vine furniture are naturally contained in environmentally friendly green.Whether it is the choice of bamboo or the use of rattan, our bamboo rattan furniture is selected.And bamboo materials are originally very environmentally friendly and healthy materials, and their growth cycles are short and high in yield. It does not affect the ecology. It is very good.

Features of rattan sofa-Novel and changeable styling

In this era of material rich material, bamboo and vine furniture can still be so popular. In addition to its environmental protection, the novel style design is also the reason why it is loved by people.Therefore, the new style and changeable shape are also one of the characteristics of bamboo and vine furniture.The structure of the bamboo vine is very tight, the texture is soft, and the toughness is excellent. Therefore, when making bamboo rattan furniture, you can arbitrarily bend to shape different shapes.If solid wood furniture cannot be done, bamboo and vine furniture can be done.Make people get more satisfaction from the body and mind, and meet the taste of modern fashion home.

藤编沙发

Rattan sofa price

The rattan woven sofa is paired with cloth cushions and pillows, so that traditional vine furniture presents European -style style like Emerald rattan.EssenceFor more rattan sofa price information, you can click the rattan sofa mall.

Rattanor furniture also plays an important role in ecology. It can not only adapt to degenerate forests and barren soil, but also grow well in natural forests without disturbing the original ecological structure and balance.The form is very unique, and the unique attraction created by the traditional handicrafts it shows. Therefore, in all parts of the world, the appearance of its appearance is elegant and concise.Moreover, it has undergone strict processing.Without pollution, it can also be recycled.