Is Artificial lawn harmful to the body?

The Artificial lawn produced by qualified raw materials is not harmful to the human body, so it is recommended to choose Artificial lawn. The first choice depends on the strength, scale and brand of the production plant.Essence

Is the fake lawn poisonous?

The Artificial lawn is chemical, which is actually the problem that everyone is worried about. Maybe everyone does not know that the chemicals used for artificialcasters are not harmful. Its main raw material isPP(Polypropylene) andPE(Polyethylene) is also a type of plastic. These raw materials have been tested by strict quality, non -toxic and pollution, and many testing standards have reached international standards.Imagine that we can usually use plastic bowls to eat some snack desserts, so walking on it will not have any impact on the human body.And artificial lawns can also prevent bacteria from breeding, so there are still few bacteria on artificial lawns.And it can also prevent direct touch with people and the ground, and also protect the soil well, allowing people to avoid soil damage.

Plastic lawn is harmful to the human body

1, Lawn to maintain toxic side effects

Once the Artificial lawn is paved, it does not need to be trimmed and cultivated in the later stage, which is simple and convenient to maintain.In fact, in order to keep the lawn tidy and beautiful, avoid weeds to grow on it, and at the same time to disinfect, it is generally sprayed with herbicides and sterilizers when maintenance.Both herbicides and sterilizers are biological killing agents, which are usually used to inhibit plant growth and prevent various pathogenic microorganisms.But they all belong to chemical products and have certain toxic and side effects.

In addition to its own toxicity, the excessive use of these agents can also enhance the bacteria resistance.Because there are many bacteria on the lawn, amplifier -resistant oxygenus Golden Polygangiola (MRSA) The easiest to infect students.This is a very anti -drug germ that can resist all penicillin.When students are playing on the lawn and accidentally falling and bumping, they will inevitably have abrasions and scratches. As long as the Skin is broken, the germs will take advantage of it, causing some serious diseases.

2, Temperature hardness is not conducive to playing

The Artificial lawn does not absorb heat, and only reflects the sun.In high temperature in summer, the surface temperature on the lawn can soar80OC ~ 90OCabout.This high temperature can easily hurt students, even if wearing sports shoes, they may damage their feet due to high temperature.Of course, sprinkler can cool down, but the effect can only be maintained20In minutes, it disappeared.In contrast, the natural lawn will not be like this at all.40OCEssence

In addition, artificial lawns are generally laid on concrete, cement land or compact soil. This"Base"As a result, the lawn's hardness is very high, far exceeding the natural lawn, and it will become harder with temperature, use time and maintenance.The higher the hardness, once the student is injured, the more likely to suffer from cerebral vibration.

3The raw materials are carcinogenic particles

The greatest harm of Artificial lawn comes from its manufacturing raw materials.Artificial lawn is generally composed of three parts: foundation, artificial grass and filling.The foundation is the basis of the entire lawn and a backing material.artificial grass is installed on the foundation.In order to increase the elasticity of the entire lawn and also to support the leaves of artificial grass, people will also place filling on the lawn, which is generally black powder tiny particles.

The color of artificial grass is dyed by pigments, containing a large amount of pigment, which may include a variety of metal elements such as lead and titanium.The black filling particles on the Artificial lawn are made of crushing with waste tires.Modern commonly used tires are a mixture, including natural rubber, synthetic rubber, carbon black and other oil -making products.This also contains a variety of metal elements, such as cadmium, lead, zinc.Lead has neurotoxicity, and excessive intake can cause nervous disorders; some chemicals contained in the tires are recognized as carcinogens; charcoal and black are made of oil as raw materials, which are adsorbed.Chemicals may be attracted by charcoal black.

4The disease that may be caused by particulate matter

In general, there are two main diseases caused by artificial lawns: cancer and nerve disorders.If there are many cases of cancer in a certain period and place, there are many cases of cancer, which is medically referred to as a cancer case group.

The harm of the nervous system comes from lead.In addition to the raw materials of artificial lawns, lead also exists in the logo line and various white threads of the plastic runway next to the lawn. These pigments are lead.The early symptoms of lead poisoning are nerve weakness, manifested as dizziness, weakness, and memory loss.This will seriously damage the healthy growth of students in physical and psychological.

In fact, through the above introduction, it is not difficult to see that the Artificial lawn with guaranteed quality is not harmful to our human body. Therefore, when choosing a Artificial lawn, for everyone's health, you cannot use low -cost and inferior plastic lawns.If you are still uneasy, then we must clean up the lawn regularly, so that we can protect the lawn well.We can also check our own body often, which is needed whether we use the lawn whether we use the lawn.Now I believe everyone should have a better understanding of the Artificial lawn!

The Buddha beads are plants under the family of Chrysanthemum, which are native to South Africa.The beads are fleshy, spherical to spindle -shaped, and there is a transparent longitudinal pattern in the center of the leaf, and there is a slightly pointed protrusion at the end of the tail.The stems are Hanging or the soil surface grows, so it is mostly cultivated as a suspension plant.

Buddha beads belong to succulent, native to South Africa.The leaf meat, the spherical to the spindle shape, the leaf center has a transparent longitudinal pattern, and there is a slightly pointed protrusions at the end of the tail.The stems are Hanging or the soil surface grows, so it is mostly cultivated as a suspension plant.Seeing that the fleshy meat like beads never thought about it and would bloom.

Cultivation technology

1. Soil: The root system of the plant is very shallow, which can be placed shallowly. Generally, the bottom hole is used with tiles, and a layer of cornography or coarse sand are paved to increase the breathability and water filtration (especially the plastic potted plants that are currently commonly used).The soil is best to use rotten leaf soil (the fallen leaves of autumn and winter trees are mixed with a certain amount of soil or a certain sand. The soil and the sand are about 1: 3).

2. Light: Buddha beads like a semi -yin environment, the light is too weak and grows slowly, and the color is dim.If the light is too strong, it will cause the pearl body due to exposure, causing the dried orchid to scorch.The growth temperature is around 12 to eighteen degrees, and it is not less than five degrees in winter.

3. Temperature: Sexuality is warm and humid, which is cold -resistant (it can withstand low temperatures of 0 C when cultivated in the Jianghuai area), high temperature resistance, the optimal temperature is about 20 C to 28 C.It grows slowly at high temperature and low temperature, especially in the high temperature environment above 30 C. It is almost dormant, and less watering should be watered, otherwise it is easy to rot.This is also one of the keys to cultivation.

4. Watering: Due to the leaf meat, juicy, drought resistance, watering should be dry and not wet during cultivation. This is one of the key to success.When the weather is dry, you can spray the leaves and vines to make up for the lack of moisture, and keep the beads full of green.Compared to half yin, the exposure may burn the bead body, and the light is too weak and does not grow strong.

5. Fertilization: The strong growth of spring and autumn should be applied thinly, and it is often sprayed with 1-3 % of nitrogen fertilizer and potassium dihydrogen phosphate on the leaf surface.

6. Pruning: During the repair, not just cut off the excess part, but start the trimming from the edge of the Flower pot or the edge of the Flower pot.It is the "top" that everyone usually says.There will be separate branches on the cut place, the more branches of the top, the more branches, and the more branches will naturally explode.

7. Preventive diseases and insect pests: Few pests and insect pests.The aphids in spring are one of them. Wiped it in time or spray 1500 times oxidative music to kill; mites in summer and autumn are second, and 1000 times trichlosterol may be killed.Pay attention to ventilation and increase the humidity of the leaf surface to reduce infection mites.

8. Breeding: The succulent beads can be cut and breed, and the branches are very easy to take root. You can cut a few sections in spring and autumn. Half are buried into the sand or loose soil, keeping moist but not accumulating water, and you will quickly take root for planting.

precautions for the breeding of polyphonic beads

1. From March to December each year is the growth period of the plant. There is a short half dormant in summer. If the light is less likely to grow long, the stems will become fragile, and the spacing between the leaves will be opened for a long time.In plants that grow in full sunshine, the plant types are stubborn strong, the leaves are full, and the spacing of the leaves will be relatively close.

2. Keep the soil slightly wet to avoid stagnant water during the growth period.The soil can be mixed with cornography and a small amount of perlite, with a ratio of about 6: 3: 1.

3. Keep as much as possible in winter as much as possible, otherwise the temperature is too low to be frostbite and die, which is less resistant to frost.When the summer temperature exceeds 35 C, the entire plant will grow slowly.At this time, watering should be reduced to prevent rotten rot from the root of the pot soil.And strengthen ventilation, appropriate shades, avoid the sun exposure.

4. Avoid long -term rain during cultivation, otherwise the stems will be rotten.

5. The Buddha beads are still relatively fast. It is almost the same for changing the pot in 1 to 2 years. The pot is changed before watering in the first spring.The Chairman of the Buddha has a lot of branches.Breeding can cut the long section directly. The cuttings are very simple. Take a section of the healthy Buddha bead and cut the dry wound cuttings in a slightly humid sand soil. You can also put it directly on the soil surface.

Where is the easiest to leak in the sun room?

1 As well as The connection between the frame and glass and the wall

Because many sun rooms are built on the wall, there are many walls facing walls, so that it is very easy to leak at the connection between the wall and the glass.There are some walls that have inner lining thermal insulation materials. When making shelves, if the ingredients are not close to the wall, and waterproof, it can easily lead to the sun room." Ten nine missions " Essence

2 , Framework construction is not strong

Some irregular sun room production companies cut corners and use non -national standard iron or aluminum pipes. The strength is not enough. The overall frame of the long sun room is deformed, causing the glue to crack and leak water.

3 ,water proof The glue is not selected well or did not fight well

Everyone knows that the Sunshine room is composed of frame, hollow glass, and broken bridges, aluminum doors and windows. The filling between the between it is glass glue, and the brush layer on the wall is exposed to the sun. The paint will gradually fall off and loose.Beat on the wall and glass The adhesive seams were slowly peeling and falling off, and the problem of leakage occurred in the cracks.

4 As well as waterproof glue failure produces cracks

The brush layer on the wall was exposed to the sun, and the coatings gradually shed and loosened. The gel seams that previously hit the wall and glass connection slowly peel and fall off, and the cracks caused water leakage.

Sunshine room leak Seepage Solution

1 After the Sunshine room framework is completed, if there is a place to connect with the wall, it is necessary to remove the coatings on the original wall so that the glue and the wall can be firmly connected.After the glue is tapping, the wall is slotted on the wall above the load, and the raindrop plate can be installed to ensure that the double -layer waterproof is not leaked.

2 The Sunshine room plays a very important role in waterproof. The top of the sun room is generally structural glue and weather resistance. In the gap between the top covering, first hit a layer of structural glue, and then attach a layer of weathering glueThis can make the frame and cover firmly connect.Between the doors and windows and the frame, it is best to give up 3-5mm In the gap, the glue can be sticking to the gap between the doors and windows and the frame, so that the structure is stronger and the waterproof effect is better.

3 The sun room is different from the doors and windows. It is formed by the overall frame structure, and the top of the sun room is generally high, and the force is large. Therefore, you must choose a good quality framework material and pay attention to the quality of construction.

4 The ending of the sun room is important.The glue between the doors and windows and the frame must not be omitted. The joints of the door and window profiles, and the joints between the frames, as long as there is a gap, may leak rain.

How to do drainage in the sun room

1 Reasonable organizationDrainage system

The reasonable organization of the drainage system is mainly to determine the drainage direction of the Sunshine room and the eaves drainage method.In order to quickly eliminate rainwater, the drainage direction of the sun room should be clearly clarified to reduce the turning point.

2 , Determine the appropriate drainage slope

In order to exclude rainwater, the Sunshine room requires a certain amount of drainage slope. The larger the slope, the smoother the drainage.However, when the slope is quite large, it will cause adverse conditions to the construction and structure layout, so it is important to determine a suitable slope according to specific requirements.The slope of the sun room is determined by various factors. Among them, the amount of precipitation in the area, the body shape, size, and structural form of the Sunshine house have the greatest impact on the slope of the sun room.The important factor, in general, the angle between the slope of the sun room and the level is not less than 18 Degree, not greater than 45 It is appropriate.

How to plant flower seeds and seed seed seedlings in plant and flower seeds

Six common flower seeds to promote the promotion of germination

1. Pharmacy treatment of various grass and flower seeds after treatment of the pharmaceutical agent, rinse it, and sow the germination until the dew

(1) Use 0.2 % sulfur sulfur solution: leaf peony, pine leaf peony, etc.

(2) Use 0.2 % potassium nitrate solution: Goldfish grass, Fengxian flower, golden chrysanthemum, Persian chrysanthemum, Qianrihong, drunk butterfly flowers, three -colored pupa, dwarfed glory, Jade beauty, bud grass, etc.Essence

(3) Use 25 10 (negative 6 backlings) GA solution treatment: a bunch of red, short glory, lotus buds, etc.

(4) Use 100 10 (negative 6 backlings) GA solution treatment: Hundred Days Grass, Fairy, Begonia, Dayan Tong, Sakura, a series of red and so on.

2. Temperature treatment:

(1) Low temperature treatment: Ancient, Fulu Shou, Hua Lingcao, etc., placed at 5 C for 3 days, which can germinate smoothly.

(2) Warm change: Implement the temperature change treatment of the 24 -hour cycle. The dwarf cows are treated at 20 C 18 hours, 30 C 6 hours or 20 C 16 hours, 30 C 18 -hour cycle.Treatment at 20 C and 8 hours of cycle changes.

3. Treatment of seeds, bells such as bridges, begonia and other seeds soaked in warm water for 10 hours in 45 C, and dried dried germination, which can germinate smoothly.

4. Open water to treat plant seeds of coconut coconuts. After the water is hot with boiling water, it can germinate smoothly.

5. The seeds of the layer of the rosewood plant plant seeds are placed in a moist soil for 90-100 days in 5 C to smoothly germinate.

6. Light treatment:

(1) Good light for good light seeds, such as: Huo Xiang, Xiangxue, Four Seasons Begonia, Lig Begonia, Ball Begonia, African Phoenix, Goldfish Grass, a series of red, summer, etc.The material is the seeding medium, such as: vermiculite, pearl salt.

2Black species of grass, calendula, Wanshou chrysanthemum, peacock grass, beauty cherry blossoms, three -color weight and so on.

How to grow flower seeds and how to plant flowers seeds

1. Preparation before sowing

1 , Prepare for the seedling pot / / box

The benefits of breeding seedlings with seedlings are: Miao Qi, Miao Zhuang, Save seeds, Development of Roots, Easy Transplantation, etc.The seedlings are recommended to use acupoints or seedlings for seedlings. Do not broadcast directly in the ground.Directly broadcasting in the ground, there are more pests and insect pests spread on the soil, low ground temperature, and water and humidity are not easy to control, affecting germination rate.The cultivation of acupoints is also convenient for statistical germination rate.

2 , Seedling matrix

The seedling matrix requires soil looseness, good breathability, water preservation and Fertilizer, clean and disease -free, and good fertility.The commonly used matrix are peat soil, coconut bran, perlite, vermiculite, and are generally mixed.For example, peat soil 85% + Suction 10% + Vermiculite 5% EssenceDon't be too thin in peat, the diameter of the perlite particles 3 - 4 Millimeter, diameter of vermiculite particles 3 - 5 The millimeter is ideal.Some Fertilizers can be added appropriately in the matrix.Most seeds are pH Value 5.5-5.8 The matrix of the substrate is good, but a bunch of red, geranium, Wanshouju and peacock grass, pH Need 6.2-6.5 Essence

3 Pelvic

The matrix is mixed with the basin. The matrix does not need to be compacted during the pelvation process. Gently flattened, otherwise it will change the physical properties of the matrix and reduce the breathability of the matrix.

4 Watering

Water the bottom water with a thin nozzle.After watering, pour the fungal agent with a fungal agent.

5 , Soak

Proper soaking can promote germination and increase germination rate.soft seeds can be soaked with cold water. The thick seeds can be soaked with warm water or hot water. Small seeds can not be soaked.For example, incense peas and black -eyed Susan pre -soaking overnight can increase the germination rate and make the germination faster.

2. Sowing

1 , Sow density

Pot pelvic sowing can be broadcast according to the actual situation 1 Gragon or multiple grains.Sowing for seedling pots, general varieties can be broadcast per Square meter 1 - 2 Thousand -grain seeds.First, the seeds are evenly divided into several copies according to the area of the seeded seedling pot, each pot.

2 ,sowing

The larger seeds can be sprinkled evenly on the matrix or sow. Smaller seeds such as short glory and goldfish grass can be mixed with clean fine sand and then broadcast.Especially large seeds such as fragrant peas and fermery, can be on -demand.

3 The depth and soil of sowing

The depth of sowing is determined by the size of the seeds and the germination of the seeds.The depth of the sowing of the general seed is the diameter of the seed 2-3 Times.Some varieties such as dwarf glory, Xiayu, star flowers, four seasons of begonia, buds need light, no need to cover the substrate, directly broadcast on the soil table; some varieties need to be slightly covered, such as a bunch of red, goldfish grass, and flowers.Some seed coverage should be slightly thicker and sowing deeper, such as watching valley.The recommended coverage material is crude vermiculite, which is very good water retention and breathability.

4 Spray water

After sowing or overwriting, spray the water again with a fine fog's nozzle to pour through, so that the seeds and matrix and coverage materials are fully exposed.

5 ,cover

Cover the glass, film, or plastic film on the sowing basin, which can keep the air humidity, and you can also heat the temperature in winter.In summer, you can not cover the membrane, and the film cannot be sealed. Both sides must be ventilated.

6 Shaded

If sowing in summer, it must be shaded, otherwise the light is too strong, and the water evaporates strong, which will affect the seed germination.

precautions

Generally speaking, small seeds are generally happy. There is no need to cover the soil. Large grains are suspected of light. The seeds should be covered with soil, covered with seeds, and it is best to place it in a cool and dark place before germination.(For example, the dwarf is suspected of light, so the plastic film covered with a black film can be used).

After understanding whether different seeds are happy, let's talk about an important factor that needs to be considered. Seasons, different flowers and plants have different sowing seasons, usually in spring and autumn, and some can only be autumn or spring. II have seen some flower friends and seeing other people's flowers look good, and quickly buy seeds to sow. This method is confused, and some flowers are afraid of heat. If sowing in summer is doomed to fail.

Third, management after sowing

1 ,temperature

According to the requirements of the specific variety, at a proper temperature, the germination temperature of most seeds is in 20-25 Between .Too high temperature and too low will directly affect the germination rate of the seeds.Peach Blossom Zero Demon

2 ,humidity

The management of moisture after sowing is critical.When the soil temperature is low at night in winter, the water is dispersed, so there is no need to replenish or less hydration at the seedling stage; if the soil temperature is high, spray hydration according to actual needs.In summer, the water evaporates is particularly fast, and water must be replenished at any time according to the actual situation.If the seeds are very thin, in order to avoid water scouring, you can use the method of watering the pot.

3 ,illumination

Except for individual varieties like a ferring requires darkness when germination, most seeds are conducive to germination under light conditions.The seeds must be accepted after germination, otherwise the seedlings will be long.After moving to the large pot, pay attention to the direction of the Flower pot regularly.

4 , Dowry the cover

After the seeds germinate, the coverage of the area should be unveiled in time.have 60% - 70% The seeds should be unveiled after the cine leaves are expanded to prevent the seedlings from growing.At the same time, the humidity of the matrix should still be maintained, so that the citrins of the non -germination of the seeds are successfully extended from the shell.

5 ,transplant

When the seedlings grow to a suitable transplant, it is necessary to fake or plant it in time, otherwise it is easy to cause seedlings and production delays.The time of various seedlings is different, and it is necessary to determine according to the actual situation.

Classification and design of the terrace sun room

1. Introduction to the terrace Sunshine room

The owners of the villa and the apartment building generally have one or two large terraces. Many owners want to build it into a sunny room. In this way, there is another sunshine space in the home. In winter, even if the sun room does not have heating, it will be warm.Essence

The terrace may not have a large space, but the general glass windows are large and the light is very good.In the decoration of the sun room, it is common to use natural materials and comfortable furniture to allow indoor and Outdoor landscapes to connect naturally here. Generally, it is set as tea rooms, small sports rooms, and play areas to create a more comfortable and romantic leisure space.

The terrace Sunshine room is mainly close to the sun. It connects the indoor and Outdoor space. Therefore, it must not only harmonize the Outdoor space, but also coincides with the overall style of the room to achieve a transition.In addition to the relaxation and resting place in the terrace, it is also a good guest and a leisure area.Put a coffee table and a lounge chair in the terrace Sunshine room. When you want to be quiet, lie here, a cup of strong tea, a lounge chair, a sunlight, one afternoon.How busy this is the leisure life of the city.

A tasteful person will make the color of the living room walk freely between cold and warm, and to achieve casual switching between modern and rural areas in style, and the decoration of a sunrise house in the terrace can achieve this goal and create to create to createLeisurely and self -procurement, entrust a strong cultural plot.

2. Category of Sunshine room in the terrace

The terrace can be divided into Steel Structure Sunshine room, aluminum alloy structure sun room, and wood structure sun room from the material.

It can be divided into three types: ordinary, casual, and functional.

Most of the ordinary terrace sunshine rooms are used as small flower rooms to raise some flowers, birds, fish insects; casual sun rooms are larger than ordinary types, and the structural facilities are better.The sun room is a complex Sunshine room.This type of design and architectural technology standards are relatively high. It can be used in space waiting rooms, small restaurants, study, or children's entertainment rooms.

3. design points

(1) According to the location of the sun room and the height of the floor, the overall wind and pressure resistance of the sun room considers many aspects

(2) According to the orientation of the sun room, consider the duration of sunlight, and make the design of the heat insulation and sunscreen.

(3) Follow the function of the sun room, and do a good job of ventilation and sound insulation.

(4) Select the main framework material according to the user's budget and style requirements.

4. The advantages and disadvantages of various top facial materials

(1) Single -layer tempered glass top:

Advantages: The best permeability is the glass top sun room, and the price is cheap.

Disadvantages: The permeability of glass is not good for insulation and insulation.

(2) Tie glass top:

Advantages: good permeability; safe, glass damage, will not hurt people

Disadvantages: poor sound insulation insulation effects poor

(3) color steel tile top:

Advantages: The insulation and thermal insulation of color steel plates are better and cheap.

Disadvantages: color steel plates are not transparent, color tuning, not grade.

(4) Degao tile top:

Advantages: The roof insulation, good thermal insulation, good thermal insulation, and diverse appearance of the roof composed of DGO tiles and sauna boards are beautiful and beautiful.

Disadvantages: The lighting is not good enough and the price is relatively high.(You can open the sunroof on the top and design tall windows around to help the lighting and ventilation)

(5) The top of the sun:

Advantages: The weight of the material is relatively light, which can effectively reduce self -weight and good permeability.

Disadvantages: Poor durability, and it is easy to get yellow and brittle after a long time.

(6) Low-E hollow glass top:

Advantages: good permeability and good sound insulation and insulation effect, can also block most of the ultraviolet rays and protect the furniture in the house.

Disadvantages: high price.

(7) The hollow glass top of the built -in electric remote control hive curtain:

Advantages: This kind of glass is integrated with a sun -shaped curtain and sound insulation. When it needs transparency, the honeycomb curtain is hidden on the side of the glass. You can't see it. When you need Shading, you can turn it off with one click, that is, you can shade.It can also protect privacy.

Disadvantages: high price

5. Selection of the facade material selection of the terrace Sunshine room

The facade of the sun room is composed of columns, profiles and glass.Generally, the columns are consistent according to the top surface frame material.For example, the top surface frame material is aluminum alloy, and the columns generally use aluminum alloy; if the top -faced frame material is steel, the general pillars will also use Square steel.The spacing of the column should be calculated based on the overall structure and weight of the sun room.

The following types of Sunshine house facade are commonly used:Plastic steel doors and windows;Ordinary aluminum alloy doors and windows;Broken bridge door and window;Aluminum and wood composite doors and windows;

The following types of Sunshine house glass are commonly used:Single -layer tempered glass;Skin -tense tape glass;Gangster hollow glass;Low-E glass;Built -in sunshade louver glass

6. precautions for the design of the terrace Sunshine room

The design of the sun room must be humanized. Pay attention to the safety, waterproof, ventilation, and Shading of the sunrise. The design of the sun room design must obey the overall style of the building and make it a organic component of the building.It can add a lot of color to the traditional architecture, and the design is not easy to say.

The safety of the design of the sun room is also very important. The sun room is also in line with the scientific mechanical structure. It has good load -bearing and wind -resistant stability, and it is simple to use and maintain.

The main material of the decoration of the sun room must be qualified. Although the project of the sun room is not large, the materials contain are various. From the floor to the wall bricks, each one needs to be designed and considered.For example, whether the floor is used to use anticorrosive wood, do the walls need a certain sense of design?

When the owner of Sunshine Fang needs to plant some natural plants in the sun room, pay attention to the choice of plant varieties.For example: If the balcony is south direction, the light is long, and you can raise some beautiful flowers and plants, such as Milan, Jasmine, Hue Sang, Rose, etc.

If the balcony is east or west, it is better to plant some vines, such as Ling Xiao, Morning Glory and so on.If the balcony is northwars, you can plant some shade -resistant or semi -negative plants, such as Wenzhu, Wannian, Turtle bamboo and so on.