1. Turtle feed and feed

Turtles have a wide range of food, and they are eaten in rice, Wheat, peas, small fish, shrimp, insects, snails, etc. The favorite foods are small fish, snails, corn and rice.In manual breeding, in order to meet the nutrients needed for the growth of Turtles, to avoid poor growth and development due to the single feed, and anorexia, a variety of feeds should be usedRice, Wheat, corn, etc. in sex feed.To allow the Turtles to digest these feed fully, before feeding the feed, corn, peas, etc. must be crushed, soaked for about 2 hours, and other large pieces of food must be chopped first before feeding.It should also be noted that during the different periods of the growth of Turtles, feeds with different nutrients should be invested according to their growth characteristics.

Turtle's life is closely related to the climate and starts to eat in early April of each year; the highest peak of feeding activities in June and August, the fastest weight increase; until October gradually decreasedWhen, stop eating and enter the hibernation period.Therefore, when feeding, it should be carried out according to the characteristics of the turtle. The general requirements are required to achieve the following points:

1. Timing.The temperature in spring and autumn is low, and the Turtles are not much activities in the morning and evening. They are only eaten around noon, so they should be fed at 8:9:00 am.From Gu Yu to autumnal equinox is the peak season of Turtles. At the time of the summer, the Turtles usually do not move at noon, and most of them are active in the afternoon. Therefore, it is advisable to eat at 16:17 pm.Time can make Turtles eat on time, obtain more nutrition, and ensure fresh feed.

2. Positioning.Set a fixed -feeding point along the shore of the pool. The food table that is filled is close to the water surface to facilitate the Turtles to bite the food.Positioning to feed the feed, the purpose is to allow Turtles to develop habits, convenient for them to find food, and at the same time to observe the Turtles' activities and check food.

3. Proten.The feed feed should be kept fresh. After feeding, the remaining food should be removed in time to prevent the feed from rotting and smelly, which affects the turtle's appetite and pollution water quality.

4. Quantitative.The feed feed depends on the temperature, water quality, Turtles' appetite and their activities. It depends on appetite and its activities, and it is advisable to be a little left.Generally, eat once every 1 and 2 days.

2. The breeding of the turtle

The newly -out -of -shell turtle has a weak constitution, and the gastrointestinal function and digestive ability are also weak. Therefore, it is not advisable to be stored in the breeding pool immediately. Instead, it should be carefully fed and nursing for a period of time to improve the survival rate of the turtle.

3. The principles of feeding and nursing of child Turtles are

1. Do a good job of cleaning and hygiene to prevent Turtles from getting sick.

2. Control the appropriate temperature and astringent to facilitate its normal growth.

3. Cultivate the childhood turtle gradually adapt to the external environment and eat themselves.The specific method is to put the newly -cut turtle in a small glass box and let it crawl for 3 to 5 hours. After the childcard umbilical cord is relieved and convergence, the time is washed with 0.6%physiological saline for a while to disinfect it.Then put the indoor glass box or wooden basin.Do not use the umbilical cord of the turtle to use artificially powerful Turtles.The child turtle breeding box is changed 1 or two times a day, and the water temperature is strictly controlled at 25130 degrees Celsius. When the weather is hot, it is necessary to spray water in the breeding box multiple times to adjust the temperature and increase the oxygen in the water, so that the child turtle can be appropriate to appropriateIt grows normally under conditions.There is no need to eat for the child turtle that just incubated for one or two days. After 2 days, you will start to feed a small amount of grain feed, and then feed a small amount of cooked eggs and mixed feeds such as fish and shrimp, frog meat, pumpkin sweet potatoes and other mixed feeds.EssenceAfter 7 days of breeding, the child turtle has a strong physique, and it can transfer it to the Outdoor breeding pond.

4. What should be paid attention to when breeding Turtles

1. Raise young Turtles, adult Turtles, and parenting pools to avoid the phenomenon of swallowing small Turtles in large Turtles. At the same time, it is also convenient to determine the amount of feed feeding and breeding management, and to observe and master the growth of the Turtles.

2. Because the Turtles are mild and timid, they should be kept quiet around the breeding pool, so as not to affect normal activities such as turtle feeding, sun, mating, and laying eggs.

3. Frequently replace the water of the breeding pond, keep the water clean, and do a good job of the hygiene of the breeding pool to prevent Turtles from diseases.

4. The sand on the open space around the wall and the wall of the pond should maintain a certain humidity.In the summer seasons, some cooling measures should be taken, such as sprinkle water and planting small shrubs.

5. Before the hibernation period, check the growth of the turtle, add the fed feed to the Turtles to accumulate a large amount of nutrients, grow the body, and save the winter.

1. Is the electric sofa loung chair easily broken?

The software sofa has the best period of use, usually seven or eight years.After that, the sponge latex will be aging and deformed, the leather will peel, the cloth surface will wear, the internal frame will be loose, etc. The service life of the brand sofa is for ten years.In addition, the functional frame of a regular function sofa must be tested by fatigue, which can generally be used for at least 20 years.Whether the electric sofa lounge chair is easy to be broken, it depends on the quality of the buying sofa. Secondly, it depends on daily use maintenance and usage. This is closely related to the service life of the electric sofa.

2. How to repair the electric sofa button in failure

What are the reasons for the failure of the electric sofa button

1. Inserting loosening will cause the electric sofa button to fail.

2. The connector of the electric push rod is loose, or the connector of the handle is loose, which will cause the electric sofa to fail.

Electric sofa button fails maintenance method

1. You can find the maintenance master to repair, because the maintenance of the electric sofa requires a certain technical content.

2. Check if the connector is loose first.

What plants are there in indoor plant walls

1 , Dragon

Schilan is a proper vertical -Hanging leaf -viewing plant, and it is also one of the plants commonly used in indoor plant walls.Root meat, slender leaves, like orchids.The stolch stems born in the leaf axillary can be long and soft, both rigid and soft; the clustered leaves at the top of the stem are drooping from the edge of the basin to the outside, floating with the wind, and it looks like a crane with wings beating.Therefore, it is known as the ancient crane orchid.The main thing is that it can absorb fine particles such as dust in the air and change the air to the moist environment. It is a good helper for home purifying the air. When making indoor plant walls, it is usually used as a suspended plant landscape.

2 , Red Gold Diamond Version Green Velvet

Red Gold Diamond Green Velvet is one of the commonly used plants in indoor plant walls.Red gold diamond vine green velvet a kind of yin -born plant, its vitality is extremely strongThis is one of the guidelines for planting of indoor plant walls.It also has the function of purifying the air, and it is compared with suitable homes, office buildings, hotels, hotels and other occasions.Staying in the room, it can make the entire room generous and elegant, rich in tropical rain forest atmosphere.Its blades are wide, hand -shaped, lustering petioles, and long and thick and strong. Its leaves are thick and green, which is an excellent appreciation plant.Therefore, all the requirements of indoor plant walls can be perfectly matched with red gold diamond vines and green velvet.

3 , Luo Luo

Green Luo is a large evergreen vine plant. It is good at tropical regions to switch to rocks and trunks that grow up in rainforests.Its surrounding and prosperous gas can not only be climbed on the cylinders made of brown, placed in the foyers and hotels.flowers.In addition, it can also be cultivated in the water as a small decoration in the room.

4 , Ye Yingchun

Wild Yingchun is an evergreen shrub.It is originally produced in Yunnan and the southern garden is quite common. It is often compiled into various shapes of greenhouse potted plants in the north.

5 , Hanging bamboo plum

Hanging bamboo plums, soft stems are soft and crispy, and Portuguese ground grows vines.Because its leaves are like bamboo and leaves, they are often suspended in the potted plants and appreciate their scattered stems and leaves.

6 , Butterfly Flower

Butterfly flowers, honeyster deciduous or semi -common green shrubs.4 As well as 5 Blossoms in the moon, flowers are as large as a plate, and white as jade.board of umbrella flowers are born at the end of the branches, and the surrounding is infertile flowers developed by sepals, and the center is bisexual flower.

7 , Graphye chrysanthemum

Melon chrysanthemum Chinese is known as Chiba Lotus, with cold and cold, and it is not resistant to high temperature and frost.The whole plant is slightly hairy, the leaves are large as melon leaves, and the green light is bright; the top of the flower is raw, and the head -shaped inflorescence mostly converges into an umbrella house inflorescence.There are all colors, and there are red and white compound colors, flowers1-4 moon.

How long can the indoor plant wall live

indoor plant wall decoration can bring very good decorative effects, but plant walls need to be carefully maintained to ensure the survival rate of wall plants.Therefore, how long the indoor plant walls can live, it is mainly related to whether indoor plants will be maintained and planting.Generally speaking, the survival time of the indoor plant wall is between two or three months and half a year. If the life of the indoor plant wall survives longer, then you must pay attention to the planting knowledge of these indoor plant walls below:

1 Water

The key to plant breeding is moisture. If you want to have a longer service life of indoor plants, you must pay attention to maintaining sufficient moisture to ensure the frequency of daily watering and extend the survival rate of plants.

2 ,illumination

Although indoor plants are planted indoors, they also need good light to ensure the light of indoor plant wall plants, which is very helpful for the photosynthesis of plants.It is also very helpful for plant life.

3 ,ventilation

Choose a plant wall indoors, so you must pay attention to the good ventilation of the room, so as to ensure the most reasonable growth environment for plants, thereby extending the life of the plant wall.

How to make indoor plant walls

There are many processes on the construction of plant walls. building a plant wall is not an easy task. It is necessary to design it in conjunction with the actual environment and structure. Plant walls also need to be targeted at regional and environment in plant distribution., Water, light, and the liquidity of air, etc., scientifically and reasonably select the appropriate indoor green plant, so that it can be arranged through art arrangements to make the indoor"Icing on the cake" achieves a beautiful and comfortable effect, making the room full of vitality.

1 Simple indoor plant wall

You can buy small squares on the Internet yourself is the wooden board fixed on the wall. Of course, the shape can be placed by yourself, which can be placed according to your favorite shape.Then you can place it on it after fixing, so it looks very good.Of course, this method is very good and very simple. The material will be very cheap to buy the materials, but it is just a hand.When you choose, you can choose to make a plant wall.

2 , Framework indoor plant wall

Generally the skeleton The pattern of Flower pots.First cultivate the green plants you need with small Flower pots.Set up a supporting skeleton in front of the wall and set up a simple drip irrigation or spray irrigation system.Then place the small Flower pot in the built -in stent gap.The advantage of this indoor plant wall is that plants can be replaced at any time, and the choice of plants does not have much restriction.The disadvantage is that the construction of the stent outside the wall is more time -consuming and laborious.So everyone should pay attention to these points when choosing.

3 , Modular indoor plant wall

After cultivation, install it indoors.The advantage is that it is convenient to install and is more beautiful.However, its cultivation generally requires a special person to be responsible, and the cost is greater.Generally, families do not do such an indoor plant wall.More troubles, people are still busy now, so this is not suitable for home, suitable for large hotels and the like.So everyone should pay attention when choosing.

indoor plant wall care method

The indoor plant wall has a different set of standards from the Outdoor plant wall. The plants of the indoor plant wall have low light characteristics, and it is very easy to wither and need to be replaced regularly.At the same time, the problem of lighting and irrigation in an indoor plant wall must be considered. Therefore, the key to indoor plant walls is how to grow plants longer.Therefore, the method of indoor plant wall care method is brought below:

1 Irrigation method

The irrigation system is particularly important for indoor plant walls.The general plant walls are used in dripping irrigation, and the outlet is set on the top of the plant wall; ordinary soil cannot keep the water for a long time. ThereforeWater resources avoid waste.

2 , Growth medium

The growth medium is the growth medium of the plant wall. It has the characteristics of light weight, difficult to decompose, excellent storage capacity, strong drainage and gas exchange capacity.The growth medium of soil as the plant wall should first fully understand its habits, types, and plant root systems. These have played a decisive role in the survival of plants.

Outdoor portable Barbecue oven Outdoor barbecue How to choose Outdoor barbecue stoves

How to choose the suitable Barbecue oven for Outdoor barbecue

barbecue is a casual Outdoor dinner activity that more and more people like.Find a weekend, invite relatives and friends to go together in their own garden courtyard, or barbecue in the beautiful lakes and mountains. Outdoor gatherings are a big thing.There are currently two types of Outdoor barbecue ovens. One is traditional charcoal. The biggest benefit of using charcoal barbecue is that you can add vanilla, wood chips or other spices to make the smoke smell well, so that it can be baked out.Food becomes more delicious.The biggest deficiency is that the charcoal itself and the remaining ashes after burning are dirty, and it takes time to clean.One is the gas -style oven that has gradually become popular in recent years.Gas grilled stoves are hot and pollution -free, which can meet the needs of barbecue in large gatherings.As the saying goes, fish and bear's paw cannot be both. To enjoy deliciousness, you must spend some effort.

The first thing to consider is whether to carry whether it is portable.Outdoor barbecue is our own items, so it is best to consider this problem when buying, which can be convenient for us to carry. This can bring us a lot of convenience. It is recommended to choose the kind of foldable type here.Barbecue oven, simple installation.

Buy according to the size of the Barbecue oven.Someone must think that the smaller the portable type, the better, but the factors of the number of barbecue people also need to be considered. Therefore, when purchasing, the type of barbecue can be determined according to the general number of barbecue people, so that everyone can eat delicious barbecue.

Buy according to the material.There are many materials for barbecue stoves in the market, and the price is different. It does not have to be expensive, but the use of iron barbecue stoves is definitely not long. It is common.The iron is not very durable and easy to rust, and most people rarely choose to buy.Stainless steel grilled ovens, light weight, but because of the material problems of the stainless steel stoves, the stainless steel grill is mostly monotonous silver. It is difficult to clean it after the burning ;; If you want a personality and solid fashionable oven, then the cold -rolled thin -steel plate grilled oven that can be designed with various high -temperature coating design on the surface is definitely the first choice.

Whether to carry oil and smoke.When barbecue, we will apply oil to the food, and the meat will drip oil. The oil droplets falling on the high -temperature objects will smoke, and the smoke will make a bad taste on the food.Therefore, the stove should have some design to catch the oil, and then let the oil flow outside the stove.

When going Outdoor barbecue, how to choose a suitable Barbecue oven? In summary, I will summarize it for everyone.Friends who like Outdoor hopes to play a reference.

[home Barbecue oven] The price of the electric Barbecue oven is the best house Barbecue oven

How much is the household electric barbecue?

The price of household electric Barbecue oven is generally150-400Between Yuan.

Household Korean smokeless multi -function electric Barbecue oven/ /What brand is good?

[Tobacco -free electric barbecue machine/ /principle of furnace]A kind of hot source directly in a straight -to -food Barbecue oven. When barbecue, the food oil will drip immediately without repeated infiltration of oil and fat, that is, there is no oil fried and fried process, so the food contains less fat, barbecueThe food produced is a real barbecue flavor.

Smokeless Environmental ProtectionMany citizen -free electric stoves, because most citizens do not have a correct understanding of smoke -free, are often easier to fooled.Many barbecue -free barbecue stoves now just eliminate the discharge of burning gases, fail to prevent the production and emissions of oil fume, and expose the heating Tube. The high temperature at the handle is not resistant to causing burns. When the heating pipe is exposed((LeakageCureAnd the handle is ordinaryPPThe glue is not resistant to high temperature and is easy to deform.Therefore, you should pay attention to the choice of barbecue stoves designed by the hidden heating pipe, so that the heating is more uniform. In addition, its chassis should be a non -stick coating baking sheet.

The baking tray is used for food -grade environmental protection materials to ensure health. The food can be directly exposed to the baking sheet. The taste is delicious and does not contain odor.

SeparationWhen choosing an electric Barbecue oven, you should pay attention to whether the bottom plate and the heating plate are separated. If it is separated, it is convenient for cleaning after using an electric Barbecue oven.

Multi -functionReal multifunctional electric barbecue stoves can be used for baked and barbecue, stir -fried noodles, vegetables, fried eggs and other multi -purpose.

[Safe, convenience]Regardless of what kind of Barbecue oven, you must first consider its safety and practicality.In terms of safety: The left and right handles of the baking sheet should be made of high -temperature resistance (such as, high -temperature resistant wood materials), non -deformation, anti -scalding, and non -slip.In terms of practicality: In addition to multi -function, it should also be washed by the fuselage, and the oil and seasonings in the chassis should be easy to clean.