Articles in Categorys Balcony Garden

Japonica

Points of japonica rice cultivation

1. Selection of land soaking

The growth ability of japonica rice is relatively strong, but you still need to choose soils with sufficient fertility and strong discharge irrigation capabilities, just like ordinary rice planting soil.Then work on the soil to work, turn it deep, apply sufficient base Fertilizer to improve the fertility of the soil.Then choose seeds with strong germination, full and full, and strong disease resistance to ensure planting benefits.And we need to soak the seeds before planting.According to the main prevention and control objects, the corresponding potion is used to eliminate the germs in the seeds, prevent pests infected, and increase the survival rate of japonica rice.

2. Cultivation management

When planting, we must plan different management points according to the growth stage of japonica rice.At the early stage of planting, pay attention to promoting early seeds, strengthen management after emergence, and do a good job of transplanting planting.In the middle period, the stems of the rice plant should be managed to manage the center of gravity, and promote the growth of strong ears and large spikes.In the later period, the root leaves are the main growth capacity, enhance the photosynthetic effect of the leaves, and improve the accumulation of photosynthesis.Promote the flowering of japonica rice, strengthen the growth ability of japonica rice, increase yield, and expand planting benefits.

3. Fertilization management

Before planting, we must apply sufficient base Fertilizer. The base Fertilizer is mainly rotten farmhouse Fertilizer, and the amount of usage is controlled according to the planting area.Then adjust the amount of Fertilizer according to the growth period of japonica rice.For example, when fertilizing the fertilization period, nitrogen fertilizer is the main, and then granular Fertilizer should be applied to meet the nutrients required for rice growth after pumping.When fertilizing, pay attention to flexibly adjustment according to the growth of japonica rice and weather.When the leaves of japonica are dull, they are weak, and the weather is better appropriately, otherwise it can be applied less or not.

4. Water management

The root absorption ability of rice after planting is poor, and the evaporation of water will be accelerated when the temperature is high and the air volume is high.Therefore, we must keep the field water level at about 4 cm after planting rice.After the rice returns in the youth, indirect watering is mainly used.When the rice is produced, the fields are put on hold to control the growth of the division and improve the permeability of the soil.Promote the stalks of stems and improve the ability of rice to resist.Water should not be too much. When the water is too much, pay attention to the drainage work to avoid roots and reduce the breathing effect of rice, resulting in insufficient yield.

Glutinous rice planting

Points of glutinous rice cultivation

1. Select soil

The glutinous rice comes from glutinous rice, so its planting method is similar to rice planting methods. Choose a piece of rice fields to carry out rectification of it. At the beginning, rough cultivation will be carried out at the beginning.The soil blocks are scattered and crushed, it is best to cover it and push the thin soil after farming.

2. Sowing seedlings

Put the seeds in the water for a while before sowing, then put it in The insulation box to germinate, or put the soaked seeds in a plastic film bag, tighten the mouth of the bag, place it in a cool place, slowly slowly, slowly slowSlow seeds will push and heat dissipate and germinate themselves.After germination, the seeds are evenly broadcast on the seedbed, and then the soil is covered with water, spread it on the ground, and wait for the seedlings.

3. Permail

Inserting seedlings means transplanting. When the seedlings grow to 8-10cm, the seedlings can be performed. The seedlings are collected into bundles to facilitate the transplant. When the seedlings are inserted, the seedlings are carefully inserted in the rice fields.Reasonable, should not be too wide and dense, excessive waste of land utilization, excessive denseness is not conducive to the growth of seedlings, and it will also cause glutinous rice to reduce production.

4. Field management

When the seedlings continue to grow, when the first stem festival is growing, it is called the division period. At this time, in order to ensure its growth and development, fertilization is often applied to make the growth of rice seedlings stronger.When the rice seedlings begin to pump, we must strengthen management at this time. It can spray Zhuang Sui Ling to improve its physiological functions, increase the chance of pollution and fertilization, and achieve the purpose of increasing production.

Wheat planting

Pain of Wheat planting

1. Choose high -quality Wheat varieties first, and plant planting before sowing.

2. Corresponding to the ground before sowing, it is generally machine cultivated land.

3. Sprinkle the Fertilizer, and the water of the land should be moderate when sowing.

4. If the water is suitable, Wheat can usually see the buds after seven days.

corn planting

corn planting points

1. Plant corn to choose land first, and choose a plus, good breathability, and high soil fertility.

2. After selecting a good land, Fertilizer Fertilizer is applied.

3. Then process the selected seeds. After the seeds are treated, the seeds can be sowed. According to the 2 capsules of a pit, pour the appropriate amount of water after sowing.

4. Post -management needs to do a good job of fertilization, watering, weeding, and prevention and control of pests and insect pests.

Xiaomi plant

Xiaomi planting Points

1. Plot selection

Xiaomi can be planted in clay and sand. To achieve high yield, stable production, and high -quality effects, good soil conditions are required to meet their requirements for water, Fertilizer, qi, and heat.Xiaomi is suitable for growing in slightly acidic and neutral soil. It is dry and afraid of waterlogging. Especially in the late fertility period, excessive soil moisture is prone to rotten roots.Therefore, it is advisable to choose a fertile loam or sandy loam with high terrain, convenient drainage, deep soil layer, and soft texture.

2. Reasonable rotation

Reasonable rotation can make full use of natural resources and soil geographical power, reduce the harm of diseased and Cordyceps, and increase the production of unit area.Although Xiaomi has no strict requirements for the previous work, it is not suitable for continuous making. Beans-Xiaomi is the best, followed by Sweet potato-Xiaomi, Wheat-Xiaomi, corn-Xiaomi, rapeseed-Xiaomi, etc.

3. finely neatly

The quality of the whole land directly affects the growth of Xiaomi sowing, emergence, and the entire fertility period.Through fine rectification, create a soil environment for Xiaomi to create water, Fertilizer, qi, and thermal coordination.

Before broadcasting, the quality standards of "early, deep, loose, shattered, and flat" should be reached to facilitate Xiaomi to make seedlings and roots."Early", after the previous crops harvested, the ground was prematurely rectified to improve the physical and chemical status of the soil; "deep", properly deepened the farming layer, about 20 cm depth;The soil balls are small, without large front straws and root pockets;

4. Selection of varieties

Different Xiaomi varieties have their own characteristics. In production, the varieties should be selected according to natural conditions, Levels of fertility, cultivation technology, stubble, and production use.Slope and two places should be used to use barren drought resistance; to cook porridge, you need to use a variety of small grains, good taste, and natural aroma.In short, the best varieties with high yield, high -quality, good commodity, and good taste.

5. seed treatment

Before sowing, selecting and drying the self -retained seeds is one of the important measures to improve the quality of the seeds and ensure that Miaoquan and Miao Zhuang.The first is to select seeds, remove the valley and impurities through wind or water selection.Followed by drying and drying the seeds for 1 D before sowing.It is recommended to use coating seeds, which has the characteristics of high seedling rate and good effect on the prevention and treatment of pests in the seedling stage.

6. Broadcasting early

It should be determined according to natural conditions, variety characteristics and stubble.spring broadcasts are generally sowing when the temperature of the soil is 10 12 in the depth of 10 cm; the summer sowing is sown in time after the first time it is closed.According to the farming system, variety characteristics, stubble mouth, etc., the amount of sowing is determined, and the principle of ensuring the whole seedlings is guaranteed.Excessive amount of Xiaomi has a small amount of seedlings that can cause seedlings to break the ridge, and the basic seedlings are insufficient; for too many, the seedlings are dense, the growth is slender, and the labor expenses are time -consuming.If the seed germination rate is high, the quality of the seeds is good, the soil is sufficient, the quality of the whole land is high, and the amount of sowing can be less. On the contrary, it should be large.The amount of seeding per hectare is 15-22.5 kg.The depth of the sowing is about 4 to 5 cm.

7. Reasonable secret

Reasonable dense planting is the coordinated development of the unit area to have sufficient number of seedlings (scores) and ears, ears, ears, and thousand -grain weights in the unit area.Purpose.

8. Science fertilization

During different fertility stages, the requirements for nitrogen, phosphorus, and potassium are different.Mainly Organic fertilizer, there are many types, such as human animal dung, compost, biogas, etc.15-30 T permed in the middle -class field, 45-75 t high -yielded fields, and sprinkled or applied evenly.Base Fertilizer, 120 ~ 150 kg of Urea per hectare, 600 to 750 kg of overlapping calcium phosphate, and 180 to 225 kg of potassium chloride.

Black rice planting

Black rice cultivation points

1. Sowing seedlings

Black rice is different from other rice varieties. It is a temperature -sensitive variety. It is stricter to the climate when sowing. Generally, the sowing time is in mid -March, so as to extend its birth period.Before the high temperature comes, it has not had time to dump, which may cause production and quality to be affected.Before sowing, the seeds are treated with seeding and warm water.Choose a sandy soil field sowing with the convenience of the sun and the convenience of irrigation and irrigation. It is appropriately scattered during sowing, which is beneficial to cultivate strong seedlings. Generally, 4-4.5kg is sowed per acre of seedlings and 1.5kg sowing.

2. Reasonable transplant

When the seedlings grow to 15cm, transplantation can be performed. When transplanting, east -west, wide and narrow plants, and large seedlings with soil transplant. Pay attention to transplant density.It is no longer divided.The plant line distance is 10cm 22cm, which can increase the ventilation and light transmission between plants, and can also use field volunteers reasonably, which is conducive to strong plant growth and improved yield and quality.

3. Added phosphorus and Potassium fertilizer

Black rice has different Fertilizers at all stages at all stages. In order to increase its output, it is an important measure to increase the application of phosphorus and Potassium fertilizer in a timely manner.Phosphorus Fertilizer is mainly based on base Fertilizer, and the application of potassium Fertilizers can be used in combination with the first medium cultivation and weeding. In the later period, selective exhibition with the growth of the plants.In the pregnancy period, a small amount should be applied, and it is not appropriate to apply too much at a time. After the dumping period, the method of spraying Fertilizer can be applied to pursue phosphorus and Potassium fertilizer.good.In addition, pay attention to the application of calcium substances. Excessive calcium absorption of black rice will make the rice grains rough and affect the taste, so it should be applied less or without lime.

4. Try to use as little or pesticide as possible

Nowadays, the cultivation of rice pests in rice pests is mainly through pesticides, but pesticides will leave residual poison in rice. When these disabled amounts are small, they will harm less to the human body.The quality of black rice.Therefore, when the black rice is cultivated, try to use agricultural prevention and control measures, whether it is pests and insect pests, or other problems, to reach the purpose of eliminating pests and insect pests, and solving problems but not pesticide residual poisoning.In addition, black rice should be harvested in time. Once the harvest is late, it will affect the quality of black rice and affect the taste.

Buckwheat planting

Pebbing planting points

1. Selection of the ground

Buckwheat has strong adaptability and low requirements for soil. Many soil conditions can be adapted, but the best is the more loose sandy loam soil.Although buckwheat has strong adaptability, in order to better plant buckwheat and obtain high yield and stable production, it is still necessary to choose appropriate land to perform proper land to provide good conditions for the seedling growth of buckwheat.

2. Select planting

The quality of the seeds directly determines the growth and final yield of buckwheat.The development of agricultural technology to this day, the cultivation technology of seeds has been perfect, and high -quality and strong high -quality seeds have been cultivated.When buckwheat planting, choose suitable high -quality seeds, and then treat seeds before sowing. The treatment of seeds can improve the germination rate, enhance life activity, increase the attributes of resistance and insect pests, and finally achieve the purpose of increasing production.When sowing, consider the soil affection and the climate environment, and choose the appropriate sowing time. The soba sowing time is in mid -to -late June.The sowing method should be determined according to the specific varieties and land conditions. You can choose the method of broadcasting, on -demand, scattering, etc., and use mechanized operations as much as possible to improve efficiency.

3. Fertilization

The growth cycle of buckwheat is relatively short, the growth rate is fast, and the requirements for Fertilizer are high. It is a crop that needs to be more fat.Overall, buckwheat has the most demand for Potassium fertilizer, followed by phosphate Fertilizer and ammonia Fertilizer. Different growth stages focus on Fertilizer and Fertilizer.Better nutrition.

4. Reasonable secret

Reasonable planting density has an important role in ensuring the ventilation and light transmission of buckwheat groups, strong single plants, increased light energy utilization of the group, and promote the increase in material accumulation and production.study on different cultivation density in Ningxia area, it was found that different cultivation density had a great impact on the amount, plumpness and yield of the single strain of buckwheat.The appropriate density can increase the number of single -strail grains of buckwheat, make the seeds full, increase the weight of thousands of grains, and increase the output.The appropriate planting density is conducive to the growth of buckwheat, increasing the growth rate of the group, the leaf area index and the optical pose, which is conducive to the increase of thousands of grain weight and the improvement of yield quality.

5. Field management

The most important thing in field management is weeding, irrigation and disease prevention and control. Fine field management also includes seedling management and flowering period management.Carry out effective measures to protect seedlings to ensure seedlings; weeding and removing weeds, loose soil; buckwheat is a crop that requires more water, especially the flowering and grouting period. It is necessary to ensure the irrigation conditions during this period;Following plants, the strong rate is low, do a good job of flowering period management, and assisted pollination.

Oats

Elementary points of oatmeal planting

1. seed treatment

Select the sunny weather before sowing of oats. Diminate the seeds for 2 to 3 cm thick, and plant for 3 to 5 days.The exposure can promote the premature germination of the seeds, increase the germination rate, emerge early, and kill the germs on the Skin's epidermis in ultraviolet rays in the sun, which can reduce the disease.Use a dual or bacterial soul of 0.2 % seedlings to prevent oatsqued black spikes and rust. In areas with severe underground pests, phosphoric sulfur or bephoan can be mixed with sulfur.

2. Sowing time

The early spring soil can be sowed when it thaws about 10 cm.The suitable broadcast period of oats is from March 25th to April 15th. The best broadcast period is before and after the Qingming, and do not exceed Gu Yu at the latest.According to precipitation, grabbing sowing is particularly critical. Grasping seedlings is a major measure to high -yield oats in dry land.

3. Sowing method

It is best to use mechanical sowing or artificial trenches for oats, which should not be sowed.The distance between the strip line is 15-20 cm, and the depth should be 3 to 5 cm. It is advisable to prevent replay and leakage. The seeding should be consistent and the sowing is uniform.The amount of sowing per acre is 10 to 15 kg, and the seeds can be reduced.

4. Pine earth weeding

If the oats come out of the seedlings, if it encounters rain and snow, it should be gently stabbed in time to break the board.During the entire fertility period, weeding 2-3 times, plowing soil weeding during the three -leaf period should be removed early, shallow, increase the temperature of the ground, reduce the evaporation of water, promote early rooting, quickly root, and preserve seedlings.Weed twice before pulling out, and weeds should be removed in time in the middle and late stages.The planting area is not large, and artificial weeding can be selected.When the planting area is large, chemical herbicides can be used. In the three-leaf stage, a 72%2,4-D butthodyne emulsion oil 60 ml/mu, or 1-2 grams/mu with 75%superstar dried float agentSpray it evenly when there is no wind and no dew.

5. Fertilization irrigation

The oats are divided into 25 kg of ammonium sulfate per acre in combination with irrigation.Oatmeal blooming periods can be used at 0.2 to 0.3 % potassium dihydrogen phosphate aquatic solution, mixed with 20 % Urea solution to pursue the root, 70 kg of spray solution per acre, and then sprayed again after 7 days to promote grouting., Improve the weight.Where there is irrigation conditions, if the spring drought is encountered, the oats were irrigated once to the segmented period, and the grouting period was permeable once.

barley planting

Elementary points of barley

1. Selection

Symons are not very strict in planting land, which can be grown for general land, but it is advisable to plant the sun, fertile soil land and low -lying waterlogging land.The severe environment should not be planted.

Soak 24 h with warm water before sowing to facilitate germination; after removal, use 70%methyl beeobadin wettable powder or 50%multi -bacterial wettable powder at 0.5%of the seeds to prevent and treat black spike diseaseThe effects are 100%.After mixing, put the seeds in a cool place and store it (don't put it in the bag). After 3 ~ 4 d, you can use sowing.

2. Fertilization method and dosage

It is roughly the same as corn. It is advisable to use Compound fertilizer for about 20 ~ 25kg acres.It can be applied at one time, and it can be applied in two times (fertilization of bottom Fertilizer, fertilization when the plant grows to 40 ~ 80 cm), and the fertilization effect is better.

3. Sowing method

The sowing period is appropriate around May 1st. The planting method is basically the same as the corn.The line spacing is about 50 ~ 55 cm, the strain spacing is 15 ~ 20 cm, and the single plants are left in each hole; the plant spacing is 30 ~ 35cm.Sowing 3 to 4 capsules per acupoint, 2 ~ 3 kg per mu.If the seedlings are uneven, the lack of seedlings is less than 10%, which will not have much impact on the output.

4. Weeding

It is roughly the same as corn. It is closed and weed before seedlings such as ethyleine, 2.4-D fat, and moisture.Field weeding can first use broad -leaved chemical herbicides such as "wide hoe".

5. Artificial assistance pollination

Because Coix is the same plant, the same spikes, divided into female small flowers, male flowers, but unlike the strains, the female small flowers of the barley are mature first, and the male flower is mature. Generally, the pollination is passed by the wind.It is best to go to the barley to shake the germ stems from 9 to 12 am to make the pollen float out and make the female flower get pollen.

Diseases and insect prevention

1. Leaf disease

To harm the leaves, use 1: 1: 1: 100 times liquid liquid at the beginning of the onset, or 500 times liquid solution of the Demon Zinc 65%wettable powder.

2. corn

Also known as the heartworm, spray pesticide prevention and control in time after discovering, it can be sprayed and killed by 800 to 1000 times of lotus oil.

Sorghum planting

Sorghum planting points

1. Selection of the ground

Land selection: Sorghum roots are well -developed and well -absorbent. It should choose flat and loose and fertile plots to plant.

Land: The quality of the whole land is the key link to grasp the whole seedlings and determine the output. Before sowing, it must be fine and tidy, and the ground is rake and the rake must be fine.

2. Rotating stubble

Sorghum avoidance, reasonable rotation method is the key to the increase in sorghum production.The ideal stubble of the sorghum is the stubble of the Beans, followed by corn stubble, potato stubble, etc.The suitable lattice is preferably soybean stubble, or rotation with corn and valley.

3. Field management

Miao and fixed seedlings: Seedlings during 3-4 leaves after seedlings, and 5-6 leaves.When setting the seedlings, leave the seedlings, leave the seedlings, positive seedlings, and leave no double plant seedlings, and two stubble seedlings. You should also remove the miscellaneous plants to improve the purity and give full play to the production of good production.

Middle-cultivation: The sorghum seedlings generally cultivate 2-3 times, and the first combination of seedlings is carried out for the first time; the second time after 10-15D.

Limited irrigation: Sorghum water requirement is characterized by the seedling period of about 10%of the total water consumption period; 50%of the extraction period of the pregnancy;about.In order to ensure that the sorghum high production is stable, it should be focused on the extraction of the pregnancy period, and the flowering period and grouting period should be permeated in a timely manner.

4. Fertilization management

Fertilizer characteristics: Sorghum Fertilizer, very sensitive to Fertilizer response, strong ability to absorb Fertilizer, and different Fertilizers required for different growth periods.Better nutrients can promote large and full grains and achieve high -quality production.

Disease prevention

1. Black Sui Disease

Prevention method: This disease is transmitted through germs. Most of the germs spores overwinter on soil or residual plants.When planting, choose a variety with strong disease resistance, and then clean up the fields, especially the diseased residual plants, concentrate and burial, and then disinfect the soil. Reasonable rotation and refinement.If it is an individual onset, first remove the diseased plant and sterilize it with lime powder on the diseased acupoint. If it is a large -scale onset, the available agent can be sprayed and controlled.

2. Rusty

Prevention method: Similarly, spore bacteria overwinter or overwinter on soil or diseased plants. After that, the spores enter the seedlings of the seedlings and gradually spread into disease spots.Choose the variety of disease resistance, strengthen the management of Fertilizer and water, improve plant resistance, strengthen field management, timely clean up disease leaves and weeds, reduce pathogens, and spray for prevention and treatment of 1500 times liquid with wettable powder at the beginning of the onset.

3, sticky worm

Prevention method: In the evening, a pot of murder is started. In the evening, a pot of pots with seductive agents are installed in the field in the evening.Or in the spawning season in June, placed grass in the field to seduce adults to lay eggs, and then burn the grass to eliminate the source of insects.During timely weeding, reducing insect eggs, and using potions to prevent and control when the onset is severe.

[Overnight] What is the shutters?Purchase and installation of shutters

What is a shutter?

The shutters are made of aluminum alloy and wood bamboo paint. It has the characteristics of durable and new, easy to clean, easy to clean, non -aging, non -fading, Shading, insulation, breathable fire prevention and other characteristics. It is suitable for high -end office buildings, rooms, hotels, villas, villas, villas, villasAt the same time, you can cooperate with stickers to make it more fresh and elegant.There are two control methods: manual and electric.By adjusting the angle of the curtain to control the light into the light, the angle of the curtain can be adjusted to the most suitable position.The windows, doors, etc. are used for bedrooms, bathrooms, and conference offices.

What are the types of shutters

The louver curtains are divided into two types: fixed and activity. It is folded from many thin pieces. It not only has the purpose of ventilation, Shading and sound insulation, but also can be used to cool down and decorate the living room.Blossom curtains are made of bamboo pieces, wooden pieces, glass reinforcement pieces, aluminum alloy tablets, and more popular plastic films and linsees on the market.

Purchasing skills of shutters

1. Pay attention to curtain specifications

The length of the louver curtain (that is, the shutters inlaid in the window) should be the same as the height of the window, and the width is generally reduced by one centimeter than the left and right of the window;It should be about 10 cm in height, and the width is about 5 cm width than the two sides of the window.Generally speaking, small rooms are suitable for dark louver curtains, and large rooms are suitable for bright louver curtains.

2. Curtain style matching should be coordinated

The windows of different formats should be equipped with different shutters.If it is a general vertical window, a general louver curtain can be selected; if it is a horizontal window, the louver can be equipped with a louver, which will look harmonious, consistent inside and outside, and beautiful.

3. The selection of curtain patterns should be appropriate

The pattern of buying shuttle curtains is also very particular.The louver curtains used in the living room should be used with waterfalls and landscape patterns, which can make people look like in the context of poetry and painting.Arranged the colorful and elegant plant paintings, static or geometric patterns, etc. in the bedroom.

4. The color space of the curtains must be coordinated

The best louver curtain is best to coordinate with the color of the room's furniture and walls.If the wall is milk yellow or white, ivory louver curtains can be used.The wall is light green and can be equipped with gray or green shutters.

Method of the installation of louver curtains

1. The installation method of aluminum alloy louver window

Aluminum alloy is a material of our relatively common shadow, which is particularly prominent in corrosion resistance.When installing, we need to fixed the installation code. All the installation code must be on the same line in front, up and down, and push the slider slider to the end of the aluminum alloy shutters.slide automatically; then use the track to use it.

2. Method of Wooden Clover window installation

Wooden louver window is currently a material that people prefer, and it looks more charm.The installation is divided into three aspects. The first is the upper orbit. After that, the leaves are worn on the broadband, and then the leaves are sorted. After wearing it, the leaves are organized.Wear in the lower orbit, and the extra broadband is attached to the lower orbit, and the bottom is buckled with a bottom. Such a complete tape rope broadband wood 100 leaves are ready.

cleaning and maintenance of shutters

clean:

1. Blossom curtains can usually be wiped with wet cotton cloth. It is completely cleaned once a month, and wiped in one direction in one direction.Because of the material and spray paint, the shutters are easier to fade, so be careful not to expose the sun.

2. When the shutters are cleaned, close the window first, spray an appropriate amount of water, and then wipe it with a cotton cloth. If the curtains are dirty, you can dissolve some detergents with warm water.The shutters are kept clean for a long time.

3. After cleaning the shutters, try not to dehydrate and dry it, but it should be air -dried to avoid destroying its texture; curtains of special materials, it is best to send dry cleansing shops to prevent deformation.

maintainance:

Usually scan with a cloth or brush. After a few months, you can remove the curtains with a wet cloth, or use moderate detergent (such as washing spirit or laundry powder, etc.).Some tracks are adhesive. Be careful not to let the track and axis water enter the water. Some tracks can be waterproof, so you don't need to use water carefully.

Profile

Pocket coconut, also known as Xiuli bamboo coconut, Pocket bamboo, Dwarf coconut, Dwarf Brown, living room Brown, Happy Brown, Pocket coconut sunflower, and Pocket Brown.Palm family bamboo brown is an evergreen small shrub, and the potted height generally does not exceed 1 meter.Its stems are upright and have irregular patterns.

Native to northern Mexico and Guatemala, with about 120 species of plants, mainly distributed in tropical regions in China.Its sex is high temperature, high humidity and semi -yin environment.The appropriate growth temperature is 20-30 C, 13 C enter the dormant state, and the wintering temperature is 10 C.Its plant is short, and its Latin name "Elegans" means beautiful.Because the plant type resembles a tropical coconut tree, the shape is small and exquisite, and the beautiful view is unique, so it is named Po Zhen coconut.Coupled with its yin resistance, it is very suitable for small and medium -sized potted plants.

Nickname

Beautiful bamboo festivals, pocket bamboo, dwarf coconut, short brown, living room brown, happy brown, pocket coconut sunflower, pocket brown.

Morphology

Evergreen small shrubs generally do not exceed 1 meter.Its stems are upright, regardless of branches, dark green, with irregular patterns.The leaves are generally born on the top of the branches, feather -like cracks, lanceolates, each other, dark green, and shiny.14 ~ 22 cm long, 2 ~ 3 cm wide, and the bases of the two feathers at the top are often combined with fishtails, tender leaves green, old leaf dark green, and shiny on the surface, such as wax products.Earlings of the meat are axillary, yellow flowers, small spherical, male and female, and the male inflorescences are slightly upright.Flower spring.

Suitable place

Usually, we will use pocket coconut to decorate the living room, conference room, bar counter, study and other places in some places. It can make the indoor look more tropical characteristics and atmosphere.

Effectiveness and role

Green viewing

Pocket coconut plants are small and exquisite, beautiful in shape, elegant attitude, thick green and bright leaves, flat leaves, adult plants are like umbrellas, dignified and dignified, simple and beautiful, bright leaves, jade and crystalline, giving people sincerity, simple, full of vitalityThe sense of view has high ornamental value.

Family decoration

The pocket coconut is sexually resistant, so it is very suitable for small and medium -sized potted plants in the room. The desktop of the case is set. It is a treasure on the stage. It is also appropriate to suspend the room to decorate the space, which can add a tropical atmosphere and charm of the indoor.The corner of the room or on the coffee table can add a breath of business indoors, so that the room shows a charming tropical scenery.

Purify the air

Pocket coconut is the smallest coconut plant. It looks like a tropical coconut tree with a small shape and is small and unique. It presents an unique tropical style in the room.There is a certain sterilization function, high steaming effect, which is conducive to increasing indoor negative ion concentration, and can also increase the humidity of the room, which is beneficial to our Skin and appeal.Because pocket coconut can improve indoor air quality, it is called the "high -efficiency air purifier" in creatures, which is very suitable for placing indoors or newly repaired rooms.

Breeding method

illumination

The pocket coconut is half -shade, and the leaf color will be yellow under the strong sunlight; if it is placed in the lack of light for a long time, the plant will become thinner.So it is best to place the window in the window.

Humidity/watering

Pocket coconuts are like water. During the growth period, keep the soil moist. When the dormant period, wait for two -thirds of the pot soil to dry.In addition, if the coconut coconut is highly high, if it is too dry, the tip of the leaf will become brown.Therefore, during drying, it is necessary to take measures such as regular water spraying to the leaves to improve the air humidity around the plant.

temperature

The coconut coconut is warm, the growth temperature is 18-24 degrees Celsius, and 13 degrees Celsius enters the sleep.It is best not to be less than 10 degrees Celsius in winter.

soil

Puts of coconut potted plants can generally be made with rotten soil peat soil plus 1/4 river sand and a small amount of basic Fertilizer.It is best to plant with good drainage, loose and fertile loam.

Fertilize

Pocket coconuts do not have high requirements for Fertilizers. Generally, the liquid Fertilizer is applied 1-2 times a month in the growth season, and it is slightly fertilized or not fertilized in the end of autumn and winter.Change the basin every 2-3 years in spring.

Soilless cultivation

Cultivation of pocket coconutless coconut without soil -free cultivation is the method of using inorganic Fertilizer solution, that is, the method of cultivation of nutrient solution.Pocket coconuts like to cover the environment, and should not be placed near the south window. It should be placed on the window sills of the north, east, and west, or is equivalent to it.The leaf color is thick green in the darker part, and the leaf color is yellowish green when the light is direct.Too much strong light can produce coke leaves and dark spots.The optimal growth temperature is between 20 and 30 C, entering dormancy at 13 C, and not lower than 10 C in winter.

Master the principle of wetness and wetness.To reduce the amount of water in winter, it is best to pour in cold water.Make clean in summerrainwater.Frequent water spray water on the leaves and the surrounding ground to maintain higher air humidity.

Nutrition solution:

1. Configuring nutrient solution should use salt that is easy to dissolve.

2. Mineral nutrition elements should be controlled within 4 .Control the amount of trace elements.

3. Timely determine the pH value of the nutrient solution to keep the plants need acid and alkali.

4. The types of various elements in the nutritional solution are different with different plants and different growth conditions.

5. Pocket coconut is called desk coconut.If it is equipped with a pure and elegant container, it looks more beautiful.Select the ceramic or glass container with porous or side holes on the bottom, and it should be suitable for the size of the plant.First spread the clean large grains or medium grains as a fixed substrate, about 2 to 3cm thick, and then put the plant in the Flower pot.Try to let the root system be unfolded around, and then fill the clean pottery, 3 to 5cm from the basin edge.Note that the roots must be cleaned during the growth period.Remove the old roots, open the roots, and place the center of the Flower pot.After transplantation, you should inject the preparation of diluted nutrients until 1/5 of the height of the container.

Frequently problem handling

Breeding method

1. Sowing method

After flowering from April to May, artificial pollination can be available, and the fruit will take half a year to mature.Make a seedbed with a wooden box, and the specifications are moderate.The matrix is mixed with 3 parts of corrupt leaves, 2 parts of mountain mud, 2 parts of humus soil, and 3 parts of sand soil.Before the broadcast, it was soaked in warm water from 35 to 40 C for 36 hours. After the seeds were fully absorbed and expanded, the soil was covered with 1.5cm. The water was sprayed with a fine pore waterwatpot. The wooden box was covered with transparent glass in a warm place.After sowing, keep the soil moist, the temperature of the seedbed is controlled between 22 and 25 C, and the seeds germinate after 30 to 40 days.When the seedlings grow 2 to 3 genuine leaves, they can bring the group to the pot.The potting soil is mainly loose, well -drained, and fertile humus soil. Pot potassium, nitrogen, and phosphorus as the base Fertilizer, including 60%, 15%of potassium, 25%of phosphorus.Mao and Fertilizer, etc., and sprinkle a small amount of fuzan and dried smoke chips to prevent insect pests.

2,Division method

There are many coconut seedlings in the coconut seedlings and should be divided in time.Mostly before the growth of plants in the late winter and early spring.Use grass charcoal and perlite mixed matrix, and use a plastic Flower pot with a caliber from 1, 5 cm to 20 cm.The soil -free potted pocket coconut coconut that is more than one year is combined with a basin in the spring and is planted in the Flower pots with the above mixed matrix. Each plant is 3 to 4 plants.

Prevention and treatment of pests and insect pests

1. Yellow leaf disease

Light is too strong: Pocket coconut is like half yin conditions. When light is too strong, the leaves will fade or yellow, losing the value of ornamental;

Solution: Maintain the coconut coconut in a place with sufficient astigmatism, which can provide sufficient light growth, and it will not cause the yellowing problem of the leaves brought by light.

Too little watering: The coconut coconut is moist and requires sufficient water.

Solution: Frequent watering and keeping the pot soil moist. When the air is dry in summer and autumn, it often sprays water at the plant to improve the air humidity of the environment.

Excessive Fertilizer: Pocket coconut requires low requirements for Fertilizers.

Solution: Pocket coconut grows 1-2 times a month for liquid Fertilizer per month.

Disease invasion: High -temperature seasonal coconut coconuts are easily infected by root rot. Disease infection will cause pocket coconut leaves to start yellow and wither, causing plant death in severe cases;

Solution: Pay attention to the ventilation and soil breathability of pocket coconut growth environment. Todin and Bacteria clear can be sprayed during the disease.

2. Black spot

High temperature, humidity, and poor ventilation are prone to dark spots, especially when growing in April to November. We must pay attention to prevention. Once the leaf tip is found, it is necessary to spray 50%of Tapin or 50%Bacteria 800 to 1000 times in time.The prevention and control of the liquid, while ensuring that the indoor is ventilated and breathable, and appropriately appropriately applied phosphorus and potassium Fertilizers, such as plant ash, and promoting the production of plants to grow better and strong.The soil should be drained well, not to be dried, not to be wet, and the pot soil should be kept moist during the growth period to facilitate plant growth and improve disease resistance.

3. Major pests: Sicatin insects

Dry air and poor ventilation can cause the harm of the grabulworm. It can spray the drugs such as phosphorus, music, and enemy cachines to prevent control.

The cause and treatment of yellow leaves

Long -term lack of water

The growth rate of pocket coconuts is extremely fast, so its growth process requires sufficient water to supply, otherwise the water is insufficient, and the pot soil is too dry to cause the leaves to yellow.

Solution

The growth of pocket coconuts needs to be accompanied by frequent watering to keep the pot soil moist, so as to ensure the healthy growth and development of the plant.

Too strong light

The coconut coconut is semi -humid and half -shade. Therefore, places with too strong light are not suitable for the growth of pocket coconuts. The strong irradiation of the sun will make the pocket coconut lighten or yellow, losing the original glorious and viewing value.

Solution

Put the pocket coconut in places with sufficient daily scattered light for maintenance. This is not only conducive to the growth of plants.

The air is dry

Humidity is also an important element of pocket coconut growth. Low humidity can cause leaves to wither.

Solution

To maintain a suitable air humidity, the air humidity must be high. Sprinkle water around the potted plants to prevent the humidity from decreased and ensure the normal growth and development of the plant.

Insufficient light

Pocket coconuts often grow in cold environments. Therefore, placing it in a stronger place will make the leaves yellow and cause death.

Solution

Daily maintenance needs to place pocket coconuts in a place where the growth light is not strong, so that it will meet the growth needs of pocket coconuts.

Improper fertilization

The growth and development of pocket coconuts need to meet all the nutrients they need, so they need to fertilize it in time, but fertilization should not be too frequent.

Solution

The time for fertilization can be stretched relative, and the degree of fertilization should be appropriate.

diseases and insect pests

High temperature in summer can cause pocket coconut infection with diseases and insect pests, which will cause the leaf yellowing phenomenon, which will cause the plant to wither and die.

Solution

During the growth of pocket coconuts, we should pay attention to maintaining the ventilation of the environment and the breathability of the soil. If the disease is found and the outbreak, it can be sprayed with Bacteria Clear and Tabin for prevention and treatment.

precautions

1. Pocket coconut sex is a shaded environment. Therefore, it should be placed in the north window, near the east windows or other bright scattered Lights in the indoor training.The leaves are scorched and the leaves are yellow.On the contrary, if it is placed in the dark part for a long time, the leaf color will fade and lose the luster.

2. The most suitable temperature for pocket coconuts is 20-30 C, and the indoor temperature in winter is between 12 and 14 C, and the minimum temperature cannot be lower than 10 C.

3. To keep the surrounding air humidity, the coconut coconut is often sprayed with water to increase the air humidity.

4. Pot soil of pocket coconuts cannot be used for acidic soil, and a small amount of clay should be added.

5. Pocket coconut breeding needs to be changed once every 3 years.

6. Pocket coconut seedlings can be applied 3 to 4 thin liquid Fertilizers in the spring.

1. Is there no Solar Lamp on the Solar street light?

Solar street lights use solar energy to be transformed into electrical energy, and then transform electrical energy into light energy to achieve lighting. Can Solar street lights be on if rainy weather and no sun?

Solar street lights rely on their Solar panels to absorb sunlight and then convert it into electric energy for its light, but the sunlight here is not absolute, not to say that the battery board will work only when the sun is high. Generally speakingThere is a light Solar cell to store energy. The stronger the light, the higher the conversion efficiency.

The reason why Solar street lights can continue to work in rainy days is because some of the batteries are stored in electrical energy. In the absence of solar energy conversion power, street lights can continue to work for a while, but when the energy consumed by the original stored power is exhausted, but the energy consumed by the energy consumed by the energy consumption is exhausted,When the solar energy is not available, Solar street lights will stop working.

Therefore, when the light intensity is not strong, the battery plate will still save the battery, but the electricity is relatively small. It may not be enough to use the electric light at night.When the battery storage of electricity cannot keep up with its external supply, the Lights will not be turned on.

Therefore, Solar street lights can also be turned on normally without the sun, but if there is no sun for a long time, when the battery is used up, the Solar street light cannot be turned on.How many days?

2. How long does the Solar street light have no solar energy?

Generally speaking, most Solar street lights can be used when there is no sun in rainy days. After all, it is necessary to consider a certain rainy day when designing.

The reason why Solar street lights can continue to work in rainy days is because some of the batteries are stored in electrical energy. In the absence of solar energy conversion power, street lights can continue to work for a while, but when the energy consumed by the original stored power is exhausted, but the energy consumed by the energy consumed by the energy consumption is exhausted,When the solar energy supplement is not available, Solar street lights will stop working. The specific can be turned on, then it depends on how many continuous rainy days can be supported by street lights.

Under normal circumstances, the default rainy days of Solar street lights produced by most manufacturers are three days, and the rainy days of integrated Solar street lights will be longer, less than five days, as many as seven days.In other words, within the specified number of days, even if Solar street lights cannot supplement solar energy, they can work normally, but once the number of days exceeds this day, Solar street lights cannot be used normally.

1. Is the water skid suitable for children to sit

The principle of water slide on the water is the water park equipment based on water as a gliding medium. Visitors follow a water park equipment along the surface of the inner surface.Children under the age of 3 are not recommended to play water slides. Children over 3 years old are different according to the types of water slides and their requirements are different. Generally speaking, children's water slides are suitable for children 4-12 years old.Try to play with adults as much as possible.And children's water park slides should be safe to protect:

1. Establish a sign at the entrance of the water parking skate of the children's water park to inform the tourists' correct play posture and tourist notes in the water park, and there must be special service personnel to supervise it around.EssenceIn addition, there must be a sound instructions and precautions for the safety of the water park to do a good job of safe protection.

2. There are many slides in children's water parks that need to be protected. Safety signs are set up in a timely manner to remind tourists.Set up monitoring and security supervisors in various areas of water parks.In order to prevent accidents, merchants must be equipped with specialized ambulance personnel.

3. Children's water park ground is that there are water all year round, so the ground is very slippery, and the staff should clean the ground in time to prevent slipping.And check whether there are sharp objects and scratch tourists.

4. Because the water park now has a night show, it is necessary to equip security personnel patrols, duty and monitor the scenes.

2. How to choose children's water slide

1. The shape of water amusement equipment

For children, the beautiful appearance and fun and fun things can deeply attract their attention, creating a good impression for children and parents as soon as possible, making them your customers.In terms of styling, large -scale combination slides must be creative. They are equipped with various types of water sketches around, thereby forming a large and thorough layout, such as vivid bionic equipment, sound -controlled water -playing equipment, and some antique water conservancy facilitiesIt is enough to attract children's attention.

2. Select according to the condition of funds

For some small and medium -sized water parks, due to limited operating costs, more water amusement equipment can be selected. ThereforeWater sketches and water slides are enough for children to play for a day.Small and medium -sized water slide prices are more suitable for third- and fourth -tier cities in China and some crowded towns.

3. Material selection of water slide

When selecting the material, you can choose the material and other materials of the FRP. You can use it for about ten years when you use it and maintain it. It is convenient and strong, and will definitely bring good income to everyone.In fact, the water slide is not much different from the land slide, but the addition of water during the experience process makes the experience of the entire product cooler.It can be used for a long time under wet conditions.

4. Water slide quality selection

The quality of water amusement equipment is the most critical, because it involves the safety of tourists.Of course, in order to reduce costs, some investors choose some quality -like water amusement equipment, but no one can guarantee the hidden safety hazards in the later period. This is not worth it.