1. How to use folding tables and chairs

folding tables and chairs are often used outdoors. Generally, the folding tables and chairs need to be opened when used.

1. How to open the storage of Outdoor folding tables

(1) Open

The folding table adopts a central telescopic design. When it needs to be opened, the table is pulled open by the table, and the hidden panel below can be expanded, and the length of the desktop will increase.The side of the embedded panel of the lift is connected by the hardware anti -collision button. The stitching is good, and a person can easily stretch and shrink.

(2) storage

Pull out the table legs out of the card slot, then fold inward, and press the round Tube at the end of the table leg when you close it.

2. How to open the storage of Outdoor folding chairs

(1) Open

The structure of Outdoor folding chair is relatively single. Generally, it is composed of seat surface and back. Most of them have special armrest design. Press the handrail and push back directly.The chair does not have the design of the handrail. Its folding part is the back of the back of the seat.There are also some folding chairs. The design of the folding chair may be a three -stage type. In this way, it is necessary to start with the two sides of the lounge chair, then pull out the middle part, and adjust the length and width of the lounge chair according to the height of the human body.

(2) storage

Find the "Unlock" button on the back of the folding chair to keep the back in a state of tightness; press the back of the folding chair slightly forward, while the seats on both sides of the seats are stacked separately; then the cushions are flipped, and you can use the cushion to put the cushion, you can use the cushion, you can use the cushion to put it.The back is completely flat, so that it can be folded and folded away.

2. What to do if the Outdoor folding tables and chairs are unstable

When using Outdoor folding tables and chairs, sometimes the folding tables and chairs will be a bit unstable. Many friends are worried that putting things up will cause folding tables and chairs to break. So how to deal with Outdoor folding tables and chairs?

1. Outdoor folding tables and chairs are unstable. The reason may not be opened in place, resulting in poor firmness. Generally, folding tables and chairs are put away, and then it is opened again. Pay attention to opening it in place.

2. In addition to the correct use, the unstable of the folding tables and chairs may also be caused by too many things and bearing the bearing capacity of the table and chair. You can remove the things on the table and chairs.

3. In addition, there may be damage at the connection of the outdoor folding table and chair. You can prepare tools such as nails, hammers, corner iron and other tools, and shake the folding tables and chairs gently.Tap at the place where each connection is connected so that we can find the damaged position, and then tighten the screw.

3. precautions for the use of folding tables and chairs

1. When the folding tables and chairs are opened and folded, they must be used in accordance with the correct way. Do not force it to open or put it away to avoid damage.

2. The capacity of the folding table and chair for Outdoor is limited. Be careful not to put too many things on it.

3. After the folding tables and chairs are used, they should also pay attention to maintenance, and timely wipe the water on the surface of the steel pipe with dry cloth. If possible, you can spray car wax or sewing machine oil for maintenance.

1. How much is the probation light?

Detective lamps, also known as Outdoor probe lamps, are commonly used outdoor lamps. They are widely used in Outdoor landscape lighting and Outdoor safety prevention areas. Many donkeys will buy a probe lamp to help Outdoor photos. So what is the price of the probe lamp?

Generally speaking, the price of the probe Lights is mainly affected by factors such as lamp sources, power, accessories, brands, performance, irradiation distance, etc. Because of the quality gap, the price is also high and low, the ordinary ones are about 50-100 yuan, and it is more expensive.It takes 300-500 yuan. These are home-based scratch. If it is a large probe lamp on the truck, the price is much more expensive, usually thousands of yuan.

2. How to buy Outdoor visit Lights

When traveling in the wild, donkeys will use Outdoor probe Lights. When buying Outdoor visit Lights, the main factors that need to be considered are the following points:

1. Brightness

The higher the brightness is generally better, but the brightness is too high, which will also affect the life of the light source, and the heat is large and the battery life is poor. Therefore, the brightness of the ordinary Outdoor visits is generally not particularly large.Objects have better lighting function.

2. color temperature

The color temperature of about 4300K slightly yellow is more suitable for human eyes. The color temperature (that is, Blu -ray) of more than 5600 people will lose the layer and cannot see the details.

3. Light source

The size of the light source of the probe light is related to the hardness of the light. The larger the light source, the softer the light, the more likely to perceive the three -dimensional objects and detect the obstacles, but the corresponding irradiation distance is also shortened.When buying, you can choose according to your use. The long -range lighting source sources are smaller, and the sources of pedestrian Lights and camp Lights are larger.

4. Light distribution

Seeing whether the light and darkness is different in the lighting area, whether there are concentrated spots. Outdoor lighting generally requires a bright light spot in the center of the light area to illuminate the target, and there is a certain range of scattered scattered around to see the road or environment.

5. Protectiveness

Outdoor visit lamps are used outdoors after all, so they require certain protection performance. Usually IP Levels are expressed that general use can reach IP43 protection, mainly to prevent light rain and occasionally falling into the water; if it is under high intensity and bad weather, it is recommendedSelect the IP67 Protection Detective Light.

6. Endurance

The endurance capacity of Outdoor probe lamps is high or low. It is recommended to choose a viewing light for the high beam to reach more than six hours (including the backup power supply), which requires the replacement of the power supply.

[Sanitary Mirror front light] cleaning method of maintenance common sense of bathroom mirror front lights

maintenance of the front Lights of the bathroom mirror

1. When cleaning and maintenance, be careful not to change the structure of the lamp, and do not change the components of the lamps casually. After the cleaning and maintenance is over, the lamp should be installed according to the original.

2. Wipe the lamp with a dry cloth, and pay attention to preventing the moisture invasion, so as not to occur for a long time.

3. The lamp installed in the toilet and bathroom must be equipped with a moisture -proof lampshade, otherwise it will greatly shorten the service life.

4. In addition, it is not allowed to hang items or baked clothes on the lamp.

cleaning of the front light of the bathroom mirror

1. It is best not to clean it with water. Just wipe it with a dry cloth. If you accidentally touch the water, dry it as much as possible. Do not wipe it with a wet wipe with a wet cloth immediately after the light is turned on.

2. In terms of cleaning, the lampshade of the cloth cannot be flushed. It can be used in a dry cleaner. If it is made of glass, it can be washed with water. Just wipe the skeleton of the lamp.

3. cleaning the front light of the mirror with vinegar is a good way.Pour the amount of the beer bottle cap in the half pot of water. After mixing it, soak the rag in the vinegar water, and the rag that is twisted to wipe the dust on the lamp.Because vinegar has the effect of cleaning and preventing static electricity, the lamps wiped with vinegar are not only bright but not easy to dip the dust.

4. When cleaning the light body, wipe it gently with a soft dry cotton cloth. The movement should be kept from top to bottom. Do not rub it back and forth.When cleaning the lampshade, it is advisable to use clean chicken feathers to prevent the lamp cover or deformation.

1. What is the Shading net

Shading net, also known as Shading net,Shading net, cold yarn, cool yarn and so onIt is a special protection coverage material such as agricultural, fishing, animal husbandry, windproof, and soil that has been promoted for more than 10 years.The shade net uses polyethylene (HDPE), high -density polyethylene, PE, PB, PVC, recycling materials, new materials, polyetteth ethyl, etc., which are treated with ultraviolet stabilizers and anti -oxidation treatment.The characteristics of aging, corrosion resistance, radiation resistance, lightweight, etc. are mainly used for the protection of vegetables, fragrant aunts, flowers, edible fungi, seedlings, medicinal materials, ginseng, ganoderma, and aquatic poultry breeding.Obvious effect.

2. The role of Shading net

The Shading net is mainly used in summer, especially in the southern promotion area.The use of Shading nets in the south in summer has become a major technical measure for disaster prevention protection.In summer (June -August), the main role of covering the shade net is to prevent the irradiation of scorching sun, the impact of rains, the harm of high temperature, and the spread of pest pests, especially for preventing insect pests from migrating.After covering the shade net in winter and spring, it also has a certain heat and humidity effect.

Third, the Shading principle of Shading net

Sunshine is spread straight, encounteredShading netAfter that, the Shading net will reflect part of the sunlight, because it has the effect of absorbing ultraviolet rays, and some of the heat will be absorbed. Because black is best in absorbing calories, the Shading net is generally black.If it is used for Shading and cooling of the courtyard, it can generally use other colors for beauty, such as green, the difference in Shading effect is not obvious, but the environmental beautification effect has improved a lot.The Shading net is densely distributed, which can keep the air flow in order to ventilate and dissipate heat.

Interior micro -landscape plant production method

1. Golden pond

Shape a small ecological space for the little goldfishWhat's more?That's right, there are plants on the top, goldfish underneath, mutual harmony, benefiting each other, and more natural intimacy.

Materials: New Zealand leaves, ivy, green dill, waterweed, tree root, small goldfish

Production: When making, put the white stones first, and then bury the plants. Putting higher plants at the end, near the part of the water in the middle of the water, you can put in green dill and ivy and tree roots to create a natural barrier for the goldfish. Finally,Add water and put in goldfish and plants.Don't forget that the water needs to be placed for a few days before it can be used.

Second, country road

It is still a common green plant, coupled with houses and roosters, there is a scene of rural prosperity.

Materials: garden pine, net grasses, moss

Production: Put a layer of pottery on the bottom of the pot, then put it in the soil, and leave the shape of the path, plant the pine and mesh grasses in the partition, spread the stones on the path, and finally spread the moss and place it.House and rooster.

Third, the road to home

The driver rushed to the horse and quickly Mercedes on the way home. Although the scene was small, it was very touching.

Materials: pocket coconut, moss

Production: First lay a layer of pottery on the bottom of the basin, put it in the soil, and leave the shape of the path. The partition is planted on the pocket coconut, put on the stones on the small road, and finally spread the moss, and put the mud man's shape.

Fourth, life in the stone seam

One grass, one wood and a stone, all have life and are wonderful.

Materials: Qinglongcao, Stone, Wooden Film

Production: Put the soil into the container first, then plant the green dragon grass, and put a small stone in the gap that is still visible to the soil, that is, it is good.

5. Life in the stone seam

One grass, one wood and a stone, all have life and are wonderful.

Materials: Qinglongcao, Stone, Wooden Film

Production: Put the soil into the container first, then plant the green dragon grass, and put a small stone in the gap that is still visible to the soil, that is, it is good.

Six, dead wood Fengchun

Tree root itself is a containerWhat's more?Not only the house of moss, but also the lush source of evergreen vines.

Materials: ivy, moss, tree roots

Production: Choose the roots with holes, put in water moss, plant moss on one side, and plant ivy on the other side.Remember to keep the moss moist often.

Seven, the dream of idyllic

Two or two or more plants can choose plants with clear colors and different shapes.Just as the popular mixed -matching style is often more moving than a single.

Materials: Perilla, Netcover

Production: Put a layer of pottery on the bottom of the pot, then put it in the soil, plant the perilla and fix it, and then plant the net grasses next to it, and finally spread the moss.

Eight, Mountain Aoke

Choosing evergreen shrubs or small trees as a bonsai is undoubtedly a better choice. Then spread moss, and go to this green freezing cup of green tea to restore the calmness and clearness of a moment.

Materials: fragrant wood, moss

Production: First lay a layer of pottery on the bottom of the pot to achieve the action of breathable for the plant, then put it in the soil, plant the incense wood and fix it, and finally spread the moss, sprinkle with stones and stones.

How to maintain indoor micro -landscape plants

1,ventilation

After watering, we generally place the ecological bottle in a place with better ventilation, helping the plant's metabolism.

2, Astigmatism irradiation

Choose to make a micro -landscape ecological bottle, there are many yin -raw plants, such as some ferns.Try to avoid the sun exposure, or do not face the sun, you should put the ecological bottle in a bright environment and let it accept astigmatism.

3Watering regularly

The main force of the micro -landscape ecological bottle is moss, and moss likes a moist environment, so everyone pays attention to watering when the health bottle is not allowed to dry the soil.The soil is too dry, and moss will slowly decrease, but be careful that it would rather not be too wet, too wet, and moss will die.

4, Watering cannot be excessive

Watering should not be too much, ecological bottle is no more than Flower pots. When it is poured, it will rot, and moss will die completely. Therefore, when you find that the water of the ecological bottle has been hoarded, pay attention to remove it.This is a taboo for the breeding of the micro -landscape ecological bottle. It should be checked frequently to avoid stagnant water.

5, Don't use tap water

Many people use tap water when they raise micro -landscapes.There is also chlorine in tap water, which will inhibit the growth of moss.The tap water should be static, and the chlorine elements in the tap water are completely volatile before they are used for watering.

Some people say that using fish tank water, this makes sense. The fish tank water is also ecological water, which is good for plant growth.