[Vegetable seeds Daquan] How to sow the four principles of vegetable seeds to sow vegetable seeds

How to plant vegetable seeds

1. Regular land

Use Agricultural tools to open the land, soft soil, increase air humidity, and divide the ridge reasonably.

2. seeds mix soil

Because the seeds are too small, sprinkle it directly into the ground, and I am afraid that it is uneven, causing some seeds to grow, and some soils have no seeds.Therefore, mix with a little soil with a dragging soil and the seeds so that it is much more uniform.

3 Small

The soft soil can be scattered directly, and the whole land is only green when it is sprinkled evenly.

4. Cover soil

After sowing the seeds, a layer of soil should be on the ground cover to prevent the Solar from being damaged to the seeds.

5. Broadcasting skills

When sowing the seeds, you can't stand straight, and you must walk down and walk down and walk around. In this way, you can be uniform when you are swollen to the ground. If you are too high, you will also blow away the seeds, causing uneven sowing.

Four principles of vegetable seeds sowing

The first is to calculate the amount of sowing. According to the fields of seedlings, seed germination rates, and seedlings, there is a slightly excess planting, so as to avoid excessive waste.

The second is to treat seeds. Before sowing the seeds for 1 to 2 days, disinfection of the seeds to kill the pathogen bacteria carried by the seeds.The warm soup soaking method is soaked with warm water at about 5 to 6 times 55 C. Stir continuously and keep the water temperature for 10-15 minutes to reduce the water temperature to continue to soak.

The third is to carry out soaking germination to increase the seedling rate and neatness. The soaking germination time and temperature of different types of vegetables are different. For example, vegetable varieties such as high -temperature melon are generally soaked for 12 hours and requires about 30 C temperature.After germination of germination for about 30 hours, sowing, while the summer and autumn high temperature seasons are sowed in cold celery, coriander and other vegetables, while the temperature is required at about 20 C for about 24 hours.

The fourth is to flatten the seedbed before sowing, pave the nutrient soil, and pour the bottom water in advance. After the seeds are dried, sprinkle it on the seedbed.Straw, gymnasis, or Shading nets.Master the high temperature before the seedlings, and reduce the temperature in time after the seedlings to prevent the length.

Recommended reading

[Vegetable seeds planting vegetables] How to buy and save vegetable seeds in vegetable seeds?

[Vegetable seeds Type] How to classify vegetable seeds for vegetable seeds

[Vegetable value schedule] Vegetable planting table for the year and four seasons Vegetable seed planting timetable

[Vegetable seeds to germinate] Which vegetable seeds need to urge buds of vegetable seeds and electric blankets

[Papering vegetables on paper] What are the seeds on the paper on paper?

[Different from Vegetable seeds] How to distinguish the seeds of vegetables?Vegetable cropy seed identification skills

[Vegetable seed preservation] The preservation period of nine kinds of common vegetable seeds is a collection of vegetable seed storage methods

[Family Flower seeds] Frequent flower seeds planting methods how to germinate flowers

1. Methods of common flower seeds

Rose

From April to June, the choice of soil: Rose seeds are low, so the soil for sowing needs to be loose, breathable, and high water holdings.The soil used is mixed with vermiculite, peat, water moss, perlite, snake wood chips, etc. If possible, configure it yourself; there is no conditional general weakly acidic soil, but there must be no foreign objects in the soil (such as such as such as foreign objects (such as such as such as such as such as: Stone broken brick glass, etc.) or choose sand soil. First refrigerate the rose seeds for about 15 days, soak it in warm water at about 40 degrees after refrigerating, continue to soak for 4-6 hours after the water cools, remove the seeds, remove the seeds, soak it after soakingSeeds are easy to germinate.

Step 2: Put the seeds in the soil, which can be broadcast 5 ~ 8 capsules in each container.After germination, a strong seedlings are leaving a strong ones; after germination, one to 3 small seedlings are left as appropriate.After sowing, cover the plastic wrap on the container (convenient for the plastic film of the bag), and the plastic wrapSpread a few small holes in breathable.Put the container in the sun and keep the temperature about 20 degrees.Most seeds can germinate 15-25 days.After germination, wait for the seedlings to thrive and transplant them into the ground.

Jasmine

Before sowing more, it is necessary to soak the seeds for 12 hours, which can promote the neat and fast seedlings.The on -demand acupoint is 3 cm 5 cm, and the thickness of the soil is about 2 cm.The seedlings must prevent drought during the seedling period, and water once every 3-5 days.It is more suitable for planting in May, setting the dewly flower bed or the pot.

Lily

Lily is gorgeous, but it belongs to novice flowers. After planting, basically do not need to control it. Water drying, just do it!Of course, you should remind the flower buddy here. Do nt think about watering every day.Just water the water! After the lily (can also cut the flowers), continue to be maintained normally. In winter, the rod will naturally wither, and the ball does not need to be dug out.Gel, occasionally give water in winter.

Tulip

planting plants in the sandy loam soil that is drained in the sun, and the plant can be considered when the soil temperature is below 12 C below 12 C.After deep cultivation, Fertilizer should be applied, and the ball is covered with soil to cover the soil. Watering is no longer watered after the soil is covered, but the grass must be covered to improve the humidity of the soil and prevent the soil plate.Before the young buds were unearthed, they were applied once, and the Fertilizer concentration was increased after the bud (10%Fertilizer 90%water).During the growth period, it is generally not watered or less watering. As long as the soil is moist, if the weather is dry, it can be poured 1 or 2 times the water transmittance (about 15 cm in damp depth).As used for cutting flowers, cutting should be cut when the flower buds are completely changed, and the viewing period of bottle insertion should be about 10 days.

First, dilute the polymorrhrophopsy (about a bowl of water), stir well, soak the wind and let it be soaked in about 1 hour, then remove it with a napkin and dry it, and dry it in the ventilation.Then add tap water to the dedicated bottle, about to the bottleneck, drip 4-5 drops of nutrient solution in the water, and then place the ball on the bottle. Note that when the ball is placed, the water is optimistic.On the top, you can only get the root plate under the ball. If there is more water, you can pour it a little. If the water is less, you can add it.Pour this newspaper or carton, and you can withdraw from about 5 cm and you can withdraw.So you just wait for the beautiful flowers.

Gorin lotus

First use water to soak the dry golden lotus seeds for 24 hours, and the water at room temperature is fine. After the seeds are soaked, use a small plastic box, two layers of paper towels below, spray wet, put the seeds on, and then cover a layer of paper towels.Also wet, cover the lid, and start germination.Because there is heating in the house, the room temperature is above 20 degrees, so about 3 days, there are seed dew.The so -called "dew" is a white bud that extends the seeds. In fact, this is its root.The seeds of dew can be planted into the soil and enter the seedling stage.Seedlings can be raised with small Flower pots, soil for seedling (to raise potted drought golden lotus, one must choose a reasonable cultivation soil), you can use a typical "three -in -soil", grass charcoal: perlite: vermiculite = 1: 1: 1: 1: 1. Generally speaking, 8-12 days can sprout and break the soil.

Lantern flower (inverted golden bell)

Sowing time: spring or autumn sowing, sowing method: 1 to 3 capsules per point, 7 to 14 days of germination of 7 to 14 days of 15 ~ 22 degrees Celsius.Use vermiculite or medium after broadcast.Keep the medium a little wet, but avoid excessive water.Transplantation: 4 to 6 weeks after sowing.There are 1 pot of 10 to 15cm pots, while large containers are 2 to 3 per pot.Light: Chang Rizhao Plants.Long Rizhao is conducive to flowering.Fertilization: High degree of Fertilizer.Add mild release Fertilizer to the cultivation medium, and apply medium -concentration liquid Fertilizer once a week.The germination rate is very low, there must be courage to plant, try a few more times!

Yu Meiren

Light light, cool and cool, avoid high temperature, winter warm and cool in the summer is most suitable for growing. The growth period requires sufficient light. At least 4 hours of direct sunlight every day.If the growth environment is dark, the light is insufficient, the plant grows thin and the color is dim.Summitted from September to October in the pre -organized seedbed. The germination temperature is 20 ~ c. Because the seeds are very small, the seedbed soil must be thin, the soil is not covered after sowing, the grass is wet, and the cover is unveiled.The seeds of Yu Meiren are easy to scatter. After one year of planting, the environment will no longer be sown, and there will be countless small seedlings in place.Watering should not be too much.

Second, flower seed germination method

Due to the different aspects of seed structure and physiological mechanism, different types of flower seeds have different germination periods.Some seeds are sowed in time, and they can germinate seedlings soon, while some seeds take several months or even years to germinate. Therefore, it is necessary to achieve artificial germination by shortening the dormant period of the seeds.

Temperature and humidity are the key factor affecting the germination of flower seeds, so you can control the dormant period of flower seeds by regulating these two conditions.Including the following methods:

1. Water immersion: Bauhinia, pearl plums, brocade flowers and other flower seeds have a short dormancy period and easy to germinate. Generally, they only need to soak the seeds in 40 C, and can be directly sowed for 1 to 2 days.Torch trees, such as torch trees, soak the seeds with difficulty germination, soak them with water at 90 C for about half an hour, and then cool down naturally for 1 day. This can soften, absorb water, and germinate.During the process of water soaking, pay attention to changing the water diligently, and control the water temperature and soaking period in a suitable range to avoid the death of embryo.

2. Low temperature: You can mix the seeds with 60%of the seeds and humidity, then put it in a plastic bag, tie the bag, put it in the Flower pot, and then bury the Flower pot into the open field of 40 to 60 cm deep.Or put the seeds in the refrigerator for 2-3 months, keep the temperature at 3 C to 5 C, and then sow.It can also be frozen to frozen the seeds naturally through low -temperature Outdoor Outdoor temperature, and it can be unearthed in the spring of the next year.Such methods are suitable for pear, plums, cloves and some autumn herbs.

3. Warm change: For flowers seeds with embryonic roots and embryo axis dormant habits, the seeds of the streaming, peony, and peony, the seeds need to be mixed with the wet sand, and then the high temperature and low temperature treatment after a certain period of time.germination.In order to break the dormant period, the embryo root generally requires a high temperature of 25 C to 32 C, and the duration is maintained at 1 to 2 months or more, and the embryo shaft requires a low temperature of 3 C to 5 C, and the length is maintained for 1 to 3 months.

Recommended reading

[Method of Family Flower] The most practical family flower breeding skills of novice flowering flowers and getting started

[Novice Getting started] What kind of flowers are suitable for novices to raiseIntroduction to newbies

[Family Flower Basin] What kind of choice and techniques of Flower pots are good for Flower pots

[Family Flower Flower Soil] What kind of soil is suitable for farming family flowers and soil.

[Family Flower Flower Fat] How does family flowers make flowers and fat Family Flower Flower Flower Fed

[Family flowers and watering] How long does it take for flowers to grow flowers and flowers?

[Family Flower flowers and Worms] How to remove flowers in the Flower pot in the family with flowers in the family

[Family flowers do not bloom] What should I do if the flowers are not blooming?

[Family Flower Flower skills] How to raise flowers to raise flowers and cultivation skills and methods

[Four Seasons Nourishing flowers] What are the precautions for family breeding of flowers in the four seasons of the family?

[Family Flower Flower tools] What are the essential small tools for flowers in common flower farming tools

one,What is the standard size of the office Conference table?

The standard size of the Conference table is generally: 1200-1600mm in length, 500-650mm wide, and 700-800mm in height.The standard size of the Conference table is usually 1200*600mm, and the height is 780mm.The height of the Conference table is generally not very long and width. The height is generally not too high or too short. There are many size of the Conference table, and different sizes will represent people of different identities.Employees 'conference tables, supervisors' conference tables and boss's Conference table will have different sizes.There are also many materials at the Conference table. We commonly include stainless steel conference tables, wooden conference tables, glass conference tables, and so on.Which material Conference table is selected, which is matched with the company's entire decoration style and other employees' tables and chairs, and the style must be unified.

2. How to choose the height of the Conference table

The general Conference table is divided according to the head. There are five conference tables, about ten conference tables, twenty -person conference tables, etc. Different sizes are suitable for people of different identities to meet.

1. The size of the boss Conference table

The conference tables of ten to twenty are generally 3.8m*1.2m, 4.0m*1.2m, 4.2m*1.4m, etc. It is more common. In fact, this Conference table is also a customized Conference table for many small and medium -sized enterprises.EssenceThe conventional size of the Grandbank is unchanged, with a height of 0.75m. It is an ergonomic height. The width is 0.6m, 0.7m, 0.8m, and 0.9m. It is also matched according to the different length.1.6m, 1.8m, 2m, 2.2m, 2.4m of 2.4M are more conventional.

2. Missing Conference table size: about ten people, the meeting table

Generally, the size of the Conference table of six to ten people is 2.2m*1.1m or 2.4m*1.1m, and there are 2.4m*1.2m, 1.8m*0.9m, 2.0m*1.0m, 1.6m*0.8m, etc.Wait these sizes.

3. The size of the staff meeting at the staff meeting: the Conference table below five people

Generally, the size of the Conference table below five people is similar to the size of the dining table.The size is generally 1.8m*0.6m or 1.3m*0.4m, and the circular diameter is generally about 1.2m.You can choose different styles according to the office, whether it is a Conference table or a screen Conference table, the height is 0.75m unchanged, the conventional size of the table is 1.2m*0.6m and 1.4m*0.7m.The conventional size of 1.2m*0.6m, the conventional size of the L -shaped screen Conference table is: 1.2m*1.4m, and the highly conventional screen of the screen is 1.1m or 1.2m.

4. The size of the Conference table above 20 people

Generally, more than twenty -person conference tables are generally used by some larger companies, and the price of this Conference table is also the most expensive.The size is generally 6m*2m*7.8m, and 4.8m*1.6m*7.5m is a relatively smaller size.

Of course, the above size is not absolute. We can also have our own needs and the size of the conference room to make the Conference table size of these different number of people.

3. What material is the best material at the meeting table

1. The plate -type discussion table refers to the disassembly and combination table of the disassembly and combination of artificial board as the main substrate and the board as the basic structure.Common artificial boards include plywood, fine woodwork, particle board, mid -fiber plate, etc.

2. Planet (splint) is often used to make a Conference table that requires curvature and deformation; the performance of fine wooden boards is sometimes affected by the core material of the plate.

3. The particle board is also called a particle board and a slag plate. The material of the particle board is loose and is only used for low -end conference tables.

4. The most cost -effective and most commonly used is medium -density fiber board.The common surface materials of the plates are thin wood (commonly known as wooden Skin), wood grain paper (commonly known as stickers), PVC rubber, polycatic paint (commonly known as baking paint), etc.The latter three types of jewelry are usually used for mid -to -low -end conference tables, while natural wood leather jewelry is used for high -end products.The board Conference table is a Conference table made of medium -density fiber boards or particle boards for surface -to -surface processes.A large part of this Conference table is the wood grain simulation Conference table.At present, some board -style tables on the market will be more and more realistic. The luster and feel are good. The price of fine products is also very expensive.

5. Pure wood Conference table, which refers to the Conference table made of all materials that are not processed again, and do not use any artificial board.The pure wood Conference table has high requirements for craftsmanship and material.The requirements of solid wood selection, drying, fingerprints, and seams are very strict.If any process is not strictly controlled, the small cracked and loosening is occurred, and the large set of conference tables will be deformed and cannot be used.

4. How to choose the color of the Conference table

The color selection of the Conference table should be selected to the atmosphere. You can choose to choose vermiculous, cherry, and warm white. These colors look more spacious and atmosphere at the atmosphere of the meeting, so that everyone will not feel cramped.The decoration style of the same conference room should be matched with the color of the Conference table to play an integrated integration effect.

Fifth, which shape is good in the Conference table

First of all, the size and appearance of the Conference table requires the specific shape and size of the conference.Generally, in order to create a harmonious and equal communication environment, the Conference table should choose round or oval -shaped, which is more conducive to the meeting.At the same time, in such a harmonious environment, people can make people think more, speak freely, and help thinking innovation and team spirit.

If it is a formal meeting, then the rectangular Conference table is needed. People with different positions and different positions sit in different positions. This atmosphere of the meeting is difficult to activate, but it is even more serious and formal.However, it is still necessary to prevent the Conference table that appears in right -angle as possible, avoid punching evils, and avoid accidental damage to the body.

1. The cultivation method of Overlord plum

Bawang plums mostly use cuttings. If there are greenhouses, it can be reproduced in winter, spring, and autumn except summer.

1. Cut into the spike from the top of the relatively mature branches, 5 to 10 cm long, put it in a cool place for two days, and cut the cuttings when the branches are slightly soft.

2. The size of the sand bed depends on the number of branches.Smooth sterilization and disinfection prepared in advance (can be used with multi -bacterial spirit and potassium manganate). The cutting spacing of the cuttings is 5 5 cm, and the depth is one -half of the cuttings.

3. After inserting, spray water a little every day, set up a small arch of plastic arch, and ventilate appropriately.

4. After five or six days, the cuttings base tissue gradually healed and sprayed water.

5. In the future, spray water to see dry and wet, take root after about two months.When the root system is fully developed, it can be transplanted and put on the pot.

Second, the breeding method of Overlord plum

1. Overlord plum can be cultivated in greenhouses all year round, and in Beijing from May to September can also be planted and open -field potted plants.It does not stain water in summer, but it can grow normally in drought.If it is made of flowers, potted plants are still easy to manage indoors and grow better.

2. Requirements for soil: Suitable for sandy soil with good permeability, not suitable for sticky soil, afraid of water staining, cultivate soil pay attention to add coarse sand, furnace ash or perlite.Overlord plum is more resistant to drought, not strict with soil acid and alkali, and slightly acidic and light alkali can grow normally.

3. Requirements for water: Watering should be dried through.Generally, the drying and high temperature season should be poured once a day.winter in winter, water once every morning in a sunny morning.Low temperature, cloudy days, and greenhouse air humidity is too large or not to be watered.

4. Overlord plums are not strict with Fertilizer. In addition to the cultivation of one -third of the grass charcoal or humus, it usually applies dibamine or other long -effect sustained -release compound Fertilizers every two or three months in the pot.Change to the largest basin in April or September of each year, add some new cultivation.

3. Diagnosis and Treatment of Overlord Plum

1. Diseases: Some of the main diseases are targeted at leaves, such as "leaf spots" and "anthracnose" and so on.Generally speaking, there are more in summer and autumn, especially when the ventilation conditions are not good.It can ventilate and see light, and use potions at the same time, so that the effect of prevention and control is good.

2. insects: "Aphids" and other are more common, which can be sprayed with oxidation and fruit to prevent and control.

1. rainy days

Wear:Wear waterproof jackets, shoes in rain boots or heel sandals.

Essential items:Umbrellas, Raincoats, prepare more sets of clothes and socks.

precautions

1. Wandering in the mountains in the rainy season, special attention should be paid to avoid low -lying land, such as gaps and rivers to avoid being threatened by mountain floods and landslides.In the case of thunderstorms, you should immediately go to the nearby low -lying or dense shrubbups. Do not hide under the tall trees so that it is easy to be strike.In addition, metal items should not be placed with you, and I can find a low place to lie down.

2. In the mountains, if you encounter severe fog and strong wind, you should stop traveling, avoid it under the cliff or in the cave, and go when the climate improves.

3. Do not estimate your physical strength when traveling in the mountains. When you are fatigue, you should rest in time.Don't take a rest until you are exhausted. It is not easy to recover your physical strength, and you can't help it.The correct method is to stride for a long time, relax and take a while slowly, or stop for a while to adjust your breathing.When standing and rest, do not remove the installation Backpack. You can support a wooden stick under the Backpack to reduce the weight of the body.The temperature on the mountain is generally low. Do not sit on the stone to rest. The stones will quickly take away the heat of the body.

4. If you travel by self -driving, check the performance of the car in advance and ensure the driving level of the driver. In this way, if you encounter landslides and mudslides, the chance of passing is greater.

5. Learn some self -protection and self -rescue methods.Once the collapse, mudslides, etc. are encountered, usually do not risk. It is best to wait for the rescue of relevant departments and ensure that the communication is Smooth.

6. Pay attention to preventing colds and diseases: As the rainy season in Yunnan is changing, it is sometimes hot, sometimes cold, and it is easy to cause cold diseases such as colds, so pay attention to keep warm and prepare the corresponding drugs.

2. High temperature weather

Wear:A must -have sunscreen or sunscreen Sleeve, wearing loose, breathable Cotton and linen or pure cotton -made light -colored clothes, with armal straw hat.

Essential items:sunscreen, sunscreen umbrella, heatstroke prevention drugs.

precautions

1. Rest at noon: The air is fresh in the morning and the climate is cool.Therefore, when traveling in summer, the departure time should be earlier, rest at noon, and traveling after three or four o'clock in the afternoon.This not only has spirit when traveling, but not tired, but also does not have heat stroke.

2. Pay attention to diet safety: pay attention to diet hygiene.Especially when eating seafood, you must choose clean and fresh food to avoid food poisoning.Do not drink ice beer, ice water, cold water immediately after eating seafood and seafood. Do not eat cold foods to prevent diseases such as diarrhea.

3. Prevent mosquito bites: Mosquito bite, it feels slightly unobstructed, but the harm of mosquitoes is not the bite itself, but that it is one of the medium of infectious diseases.Therefore, some insect repellent should be prepared when traveling, tightly tight pants, and tie the top in the pants to minimize the bite of the insects as much as possible.

4. swimming by the sea should be in a limited area: when you participate in swimming activities in the seaside area, it is best to accompany you, have a strong sense of self -protection, carry the necessary protection of life supplies to prevent drowning accidents.

Third, snowy days

Wear

Wear non -slip Climbing shoes, and the heels are 2 cm. It is better to wear a chopped anti -slip glove to wear with waterproof and waterproof gloves.

Pay attention to the warm head and neck, wear suitable warm underwear, assault jackets and fleece jackets, and the color of the clothes is as bright as possible.

Essential items:High -calorie food

precautions

1. Pay attention to weather forecast.We must not only pay attention to the local weather conditions, but also need to pay close attention to the weather conditions of the destination.Because in the local and destinations, it will cause our travel to be blocked.For example, leading to a late train or cancellation of flights.

2. Do a good job of planning other travel methods.If the flight is encountered because of the snow cancellation or the train is seriously wrong due to heavy snow, we should start the second set of travel plans in time.Therefore, before travel, it is essential to make the corresponding travel plan.

3. Arrive at the airport in advance.If we encounter a situation that we must take a flight, but the flight is affected by the heavy snow or cancellation.Then arrived at the airport this morning, on the one hand, we can prevent our flights by mistake because of the poor traffic conditions, and on the other hand, we can also travel to other flights in advance.

4. Book the airport lounge in advance.Due to heavy snow, the flight delays are delayed. In this case, reservation of the airport lounge in advance can not only reduce our boat and car, but also make us more timely understand the flight status and make reasonable arrangements.

5. Prepare the corresponding warm clothes.If your travel destination is snowing or in cold weather, be sure to bring more warm clothes.Don't light up because of laziness, or feel that you have money to buy such ideas.Because in other places, we are unfamiliar with the surrounding environment, and it is impossible to buy warm equipment in a short time.

6. Prepare a navigation equipment.Nowadays, smartphones generally have navigation functions such as GPS, so download the corresponding (offline) maps in advance and open traffic.In this way, in the case of heavy snow, we can find the hotels and other places in time.

7. Do not drive alone in the field.If you are outside, do not travel alone.Because if you encounter a car breakthrough, we may be difficult to deal with it alone.