1. What kind of material is good for casual reclining chairs?

1. Aluminum alloy lounge chair

The combination of aluminum alloy and Tesling cloth is a very modern and fashionable combination. This new material is basically characterized by light quality, portable, easy to disassemble, and easy to move.Special attributes, so during the design of the lounge chair, designers will constantly correct the lines and angles to make it coordinate with the human body to achieve the best results.

2. solid wood lounge chair

It is made of naturallyhuli wood, water song willow, red cherry wood and other materials, so the price is different. Different wooden products determine the price of the lounge chair.The black -hearted merchant cheated.

3. Teng compilation lying chair

The use of aluminum alloy framework and purely hand -woven vine products can be placed indoors and Outdoor. It is not afraid of the wind and sun, and it is not easy to deform. It can also be customized according to your style.And the style has been greatly improved. If it is placed next to the pool, its anticorrosiveness is much better than other lounge chairs.

4. Plastic lounge chairs

Simple and generous, very popular with consumers. It uses polypropylene environmental protection materials and improved, 100%recyclable, with efficient environmental protection quality.At the same time, the product also has a special ability to defend bad climate and resist the infringement of strong ultraviolet rays. Long -term use can still maintain the characteristics of bright colors.

2. precautions for buying chairs

1. Look at weight

The key to seeing the overall quality of folding lounge chairs is whether the framework is firm. It is recommended that when buying, you can shake and shake the front, left and right of the lounge chair. If it is firm and strong, it means that the quality of the lounge chair is good.

2. Look at the materials

If the folded lounge chair is an aluminum alloy pipe, it is best to choose a steel pipe with a thickness of about 1.2 mm and no impurities; it is best to be aluminum alloy pipe, which is lighter and easy to fold.

3. Look at the architecture

In order to be qualified in the quality testing, some products will plug some waste scoot pipes into the steel pipe to achieve the purpose of qualified weight. Such a lounge chair can easily bent off the steel pipe. It is recommended that you try to sit in person.Every angle must be changed to understand whether it is qualified, and then buy it after confirmation.

4. Look at the details

Because the factory equipment and technology are different, there is also a gap in details. When we buy, we must carefully observe whether the steel pipe is rough or burrs, and then see if the joints of the steel pipe have arc treatment.During use, it will be easily scratched by sharp burrs or sharp corners.

Triangle Liuli lotus is also known as the triangle Yulu, which is the genus of Afu Flower Kaisa reedSucculent, Native to South Africa.The plant is short, and the plant height is generally 5-6 cm.The leaf -shaped leaf color is more beautiful and has a certain ornamental value.

Morphology

Perennial meat quality herbaceous plants, early plantsFor a single, it will gradually be in groups in the future.The meaty leaves are tightly arranged in a compact lotus seat. The leaves are meaty, which is relatively pointed, Emerald green, and a transparent or translucent window in the upper half.

Growth environment

It is particularly easy to group, and there are very few demand for sunshine, and it is easy to sunburn, so it is not appropriate to expose the sun.The increase in sunshine can be changed to red. It is advisable to breed under the condition of semi -overcast g of gitches. The root system is developed. The water demand for water during the spring and autumn growth period is slightly more demand for water. In summer, it is high -temperature dormant, and low temperature growth in winter needs to reduce watering.

Distribution

Native to South Africa and can be cultivated in many places in the world.

Breeding technology

Water

The spring and autumn are the long -term. During this period, the Delta glazed lotus demand for water is very large. We must water it frequently and keep the soil moist. Watering in summer and winter should follow the principle of "dry and transparent".

illumination

Triangular glazed lotus requires less light. If light for a long time, the color of the leaves will become red.Do not expose the sun in the hot summer, and it is easy to sunburn the leaves.Usually maintaining the environment can be half -yin, and in the astigmatism environment is conducive to growth.

soil

The root system of the triangle glazed lotus is developed, so it has a large demand for soil nutrients. It is best to choose sandy soil with breathability and good water permeability.

Fertilize

Fertilization before flowering: Triangle Liulian can apply phosphorus and Potassium fertilizer before flowering, promote the formation of buds, increase the amount of flowering, and provide the nutrients needed for plant growth.Apply 1 or two times a year, and if you apply some phosphorus Fertilizers properly, the color is more gorgeous.

Fertilization after flowering: After blooming, the nutrient consumption is too fast. It is necessary to properly supplement some Fertilizers to ensure that the plant's nutrients are sufficient to grow normally, and some rotten organic Fertilizers can be applied.

temperature

summer temperature: high temperature in summer, you need to cool down and strengthen ventilation.If the temperature exceeds 35 C, the plant needs to break the water.

winter temperature: When the temperature in winter is above 10 C, the plant can grow normally. When it is lower than 5 C, the pot soil should be kept dry. If the bottom end of the plant grows, frostbite will occur, and even dry death.

The cause of the yellow leaves

There are usually several cases:

1. Excessive watering causes pots of potting soil, hypoxia in the soil, rotten root system, and leaves start to turn yellow.

2. Watering too little, the evaporation of the water of the leaves is greater than absorbing, causing water supply in short supply, and it will also cause the leaves to yellow.

3. Excessive fertilization, especially when applying too much nitrogen fertilizer and lack of phosphorus and potassium Fertilizers, it is easy to cause the leaves to become yellow.

4. The light is too strong, and it is caused by the exposure, especially in the hot summer, to shade the Succulent plants appropriately to avoid exposure.

5. In addition, the lack of light and insufficient sunlight can also cause the leaves to become yellow. Of course, some leaves turn yellow is caused by the metabolism of the plant, which is normal.

Appropriate measures should be taken according to your own maintenance management.Do not water too much watering, do not cause potting of pot water. If there is a rotten root, you can cut the rotten roots, and then wash a root sterilization and disinfection with a multi -bacterial solution or potassium permanganate solution.During the high temperature in summer, the Shading measures should be taken. If it is caused by fertilization, the lack of Fertilizer can be planted into a new culture soil or using high -ingredient liquid Fertilizer to remedy.

Breeding method

Because it is particularly easy to grow, it is generally used in a division to reproduce.

Main value

The leaf -shaped leaf color is more beautiful and has a certain ornamental value; it can also be planted indoors to absorb substances such as formaldehyde and purify the air.

precautions for Triangle Liuli Lotus Breeding

1. Pay attention to light

If the triangular glazed lotus is insufficient, the plant will grow long, and the upper and lower distance between the leaves and leaves will be stretched, making the plant type loose, the redness of the leaves will also decrease, the leaf rod becomes tender, loses the value of ornamental value

2. Choose a basin injectionmeaning

When a novice can nourish the fat lotus, be sure to choose a basin with good breathability and water permeability. To avoid the accumulation of water stasis at the root, it is best to choose a basin with a drainage hole with a drainage hole at the bottom.

3. Pay attention to temperature

The entire plant grows slowly or completely at high temperature in summer. At this time, it must be ventilated and appropriately shaded to avoid exposure and watering.

4. Pay attention to water Fertilizer

When the temperature is too low in winter, you need to move into the indoor maintenance. Stop watering and fertilizing can be stopped below 5 C.Do not spray when watering in winter, because the water stays in Ye Xin for too long, which will rot the Ye Xin, so it must be poured directly to the root during watering.

glass catfish

A fish that lacks fins in the family.The name of the glass catfish comes from the two long -shaped cat beards from the transparency of the whole body and growing in the mouth.

glass catfish appearance characteristics

glass cat fish length10~12Centimeters, like a willow leaf.Head kiss tip,

There is a long tentacle on the mouth2Roots, often extend or rotate freely, detect water flow, enemy feelings, obstacles, and assist in foraging.The chest and abdomen are extremely short, and the head, chest and abdomen only account1/4Essence

The tail handle is extremely short, and the tail fin fork.Back fin degenerate, long buttocks and anal fins, and width of front and rear fins.The whole body is transparent, and the spine, thorns, fins and internal organs are clearly visible.The color is as light as jade, and it is like a high -end jade carving craft.

glass Cat Living Habits

glass cat fish like weak acidic soft water, old water, the most suitable water temperaturetwenty two~28.It has strict requirements on water quality and water temperature. Pay attention to the water quality during breeding. The water quality should be suitable for the requirements.11~15The old water of the sky, without using chlorolysis without chemical reagents1Sub -exchanges, the water temperature of the water is consistent.It often moves at the middle of the water, and swimming often sags at the tail.Do not choose food, like to eat live, such as fish bugs, nematodes, etc.

Mild temperament, like to gather together, fear loneliness, easily die when you are alone.It is advisable to support the same group, like a small number of small fish that can be mixed with the temperature and slow habits.The alkaline water has a certain hardness, but it should not exceed10DHEssenceSuitable water temperaturetwenty two~26.Live bait, such as water earthworms, branches, rasses, etc.It can be reached in natural waters8cmEssencePopulation distribution editing

This fish is mainly distributed in Thailand, Malaysia, Indonesia, and the Xiangtou Mountain Reserve in Boluo, Guangdong, my country.Frequently move at the middle of the water, like weak acid soft water, old water, the most suitable water temperaturetwenty two~28Celsius.Hematima, love to eat live food, such as fish, insects, nematodes.

glass cat fish breeding

parenting

The purpose of feeding pro -fish is to obtain high -quality fertilized eggs.There are two types of feed for feeding fish and feed with feed. The feed and feed protein should be greater than40%, Crude fat is greater than3.5%The water is lower than4%,calcium0.9%~1.6%,phosphorus0.8%~1.4%, And add an appropriate amount of substances that are functioning to sex gonades, such asVEAs well asVAAs well asVD, Trace element zinc, etc., feed every day1~2Second-rate.In the breeding season, feeding can be increased every week2~3The secondary corner, radius -foot type, small fish, small fish, shrimp and other fresh feeds such as insects or boiling water or boiled water.Pay attention when feeding:

Water water pre -store2~3sky.

water qualitypHAdjust to6.5~7.5Essence

WaterpH7~8Essence

Fertilize

Feed the pro -fish and mother separately2~3Heaven (can be seen between each other, you can add a glass partition to the breeding box, separate the male and female).1~2:1Put the proportion into the spawning pool for spawning fertilization.glass catfish usually lay eggs in the early morning. To prevent pro -fish from swallowing fish eggs, a mesh can be used.2~3mmThe net will restrict the pro -fish on the upper half of the spawning pool to prevent the pro -fish from swallowing fish eggs.Each female can lay eggs300~1000grain.

Artificial incubation

After the fertilization, the fertilized eggs should be removed in time to remove the foreign body, and the eye view has small white spots and abnormal eggs.Then move the fertilized eggs into the culture box for incubation, the temperature is25~28, the temperature difference cannot exceed0.5.During this period, you can observe the development of the embryo under anatomy, about2If the sky hatchs, the small fish can produce the membrane. The fry of the fry of the newly produced is low, and lying on the bottom of the water.

Pay attention when hatching:The diameter should be used when the fertilized eggs at the bottom of the siphon outlet pool1cmThe left and right Skin tubes can cause damage to fertilized eggs if they are used with hard straws. Water and cleaning water for incubation. The water quality should be good. The difference in water temperature should not be too large. To maintain relatively constant, for fertilized eggs, severe temperature changes can cause embryonic death. During the incubation period, it should be cleared up in time every day and change the water.

glass cat fish price

The price of glass catfish on the market now floats within a certain range. Generally, adult glass catfish are between dozens and hundreds of yuan, and the fry on the market is cheaper. Generally, it is in10Yuan to30Around Yuan, specific price, consumers consult in the local aquarium.

How to raise glass cat fish

glass catfish is a very strange tropical fish, which can be reached in full length10For centimeters, there is a bright silver -colored external body in the abdomen, and even a fishbone can be seen clearly. It is like a glass strip to swim.

The origin of glass cat fish is alkaline soft water, so the newly introduced glass cat fish cannot be called acidic raising water according to routine, otherwise it will be bad.twenty two, totwenty four26is suitable.

The non -mixed -nursing varieties are cut in the box of glass cat fish. You must also pay special attention when breeding operations. You cannot hurt the body surface of the glass cat fish.

glass catfish should be kept in the environment with sufficient oxygen content and medium -intensity light. The environment that is too strong and dark is not conducive to their growth.The family of bait should be based on nematodes and water fleas, and artificial feed should not be used.Keeping water to keep high cleaning is an important measure to ensure the healthy growth of glass cat fish.In the turbid water, they will die soon.

Gobelin cat fish has a long life span, generally not more than two years.

1. How to install the towel hook

1. Wipe the tiles with clean rags or paper towels

Because most towel hooks are used in suction cups, the characteristic of suction cup hook is to use atmospheric pressure to squeeze out the air in the suction cup, and then stick it to the tile.There is no other dirt in the suction cup, so wipe it with a rag or a paper towel and place it.

2. Apply some edible oil or lubricating oil on the suction cup

Oil can prevent the entry of air and some dirty things cannot enter the suction cup. It is very helpful for the firmness of the suction cups, so you can apply some edible oil or lubricating oil to increase the stability.Or some water is okay, but the water will evaporate, so it is better to apply oil.

3. Apply some egg white on the suction cup

If you don't want to apply food oil, you can also apply some egg white, the effect is the same, but try to avoid more patterns or stomachs on the tiles, so it is easy to not be firm.

4. Put the hook in the place you want to place

At this time, we must pay attention to put it on the tile as flat as possible, and try to put it at one time. Do not adjust too much, it is easy to make the hook not firm.

two,How much is appropriate?

The height of the towel hook is very important. Generally speaking, the bathroomtowel hookThe height of the installation height can be determined according to the height of the family, usually 80 mm to the height of the family is almost the same.This height, the whole family is usingtowel hookIt will be more convenient.

1. How about leisure Outdoor furniture customization

1. The advantages of customized Outdoor Furniture

High degree of design freedom, small size and restrictions

There is no doubt that customized leisure Outdoor Furniture can almost complete your requirements for any size and shape and material.

Strong autonomy, the use of materials and the use of color is more flexible

It can monitor the use of materials and control the quality in the production process, so customized Outdoor Furniture is usually better durability.

You can change the design style according to use, etc.

For example, the case of customized Outdoor Furniture that is often made is the design of children's rooms.Generally, Children's Room space is not large. Through customized beds and Desks, a lot of space can be saved, and the overallness of the entire room is also very strong.

The world is unique, showing personality

It greatly meets the pursuit of different consumers' personality in the style of furniture. Through the communication and communication between designers and consumers, it further meets the actual needs of customers and promotes product updates.

2. The disadvantage of customized Outdoor Furniture

For reference without templates

Before the finished product is really made, it is difficult to grasp what it looks like, because there is no finished product and no template, and everything is based on the designer's drawings and experience.

Long production cycle

Customized Outdoor Furniture requires a certain production cycle and cannot be used instantly.

2. What are the common craftsmanship of leisure Outdoor Furniture

1. Drying process

Many solid wood Outdoor Furniture will use high -quality log materials. By baking kiln at a temperature of about 70 degrees in the drying kiln, it can achieve the role of sterilization., Prevent a list of deformation during the product use process.

2. Pottery soaking process

Imported Outdoor paint is soaked to the greatest extent to protect the fat from the wood.

3. Product surface treatment process

Most of the vine products and aluminum alloy Outdoor Furniture are formed by stamping through machines. In the case, there are few welding, and it has been rusted several times.The steel parts of the product are treated with electrically diligently, and are not oxidized and non -rusty.The stainless steel parts are made of 304, which is beautiful without rust and oxidation products.