Articles in Categorys Balcony Garden

1. What are the factors that affect the waterproof performance of street lights

1. Ultraviolet

Ultraviolet rays have damaged effects on the insulating layer of the wires, shell protection coatings, plastic parts, sealing glue, sealing rubber strips, and adhesives exposed to the street lights.

After the insulation layer of the wire is cracked, the water vapor will penetrate the inside of the lamp through the gap of the wire core.After the lamp shell is coated with aging, the coating of the edge of the shell will crack or strip, and there will be gaps.After the adhesive gum aging between the electronic sealing collagen, the sealing glue strip, and the structural parts, the adhesion, deformation, cracking, and the gap will also be reduced in order to reduce the waterproof performance.

2. High and low temperature

The temperature of the Outdoor daily changes greatly. The surface temperature of the summer lamps during the summer can rise to 50-60 C, and it will fall to 10-20 C in the evening. The temperature of the ice and snow in winter can be reduced to zero, and the temperature difference between the year will change greater.Under the high temperature environment of Outdoor street lights, materials will accelerate aging and deformation.When the temperature drops to zero, the plastic parts become crispy, and it may crack under the pressure of cold air.

3. Hot expansion and contraction

The shell of the outdoor lamps will cause thermal expansion and contraction due to changes in temperature. The lineflation coefficients of different materials will be different. The two materials of glass and aluminum profiles will displacement at the combination.The process of thermal expansion and contraction is continuously repeated, relative displacement is repeated, and the air density of the lamp is greatly damaged, the gas density is poor, and the waterproof performance is greatly reduced.

2. How to deal with Outdoor street lights and waterproof

At present, Outdoor street lights are mainly divided into two major directions: structural waterproof and material waterproof. Structural waterproof is to improve the structural protection performance of the lamp body and enable it to cope with the harsh Outdoor environment.The position of glue density electrical components is used to prevent waterproof with glue material during assembly.The treatment method of Outdoor street light waterproof treatment is specifically:

1. waterproof waterproof at the imported line hole

The entry and exit line of Outdoor street lights is the easiest place to enter the water. Therefore, the screws and nuts of this part must be tightened in place. The entry and exit cable cannot be easily pulled out. You can use the Gaza Belt, glue and other methods to be fixed.If the lamp is buried underground or in water, then it is allocated at the bottom. The occasions used are that the lamp body is more infiltrated by water, and the import line must be increased.

2. glass splitting waterproof

If there is a glass rubber ring, first fix the groove of the tank or rely on the edge of the lamp body or the light in the lamp to play a small amount of uniform waterproof glue to increase the squeezing and sealing of the rubber ring when the tightness is tightly locked;If there is no glass rubber ring, first in the glass gum, the waterproof glue is placed obliquely.

3. Cover the glue ring to fight screw waterproof

First consider the fixed rubber ring. Generally, the lamp body has no glue groove. The thickness of the rubber ring and the side of the screw hole is fixed first; if the lamp body has a glue groove, first play a small amount of glue in a circle in a circle.Fix the rubber ring first; for the lamp body with waterproof structural waterproof, it is also necessary to evenly beat some glue on the surface and side of the tape.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

1. Is white charcoal charcoal?

Carbon is a collective name for charcoal products. It usually includes four categories: white charcoal, black charcoal, activated carbon, and mechanism charcoal. White charcoal is also a type of charcoal. As early as Qin and Han, white charcoal had appeared in China.The fuel is used for smelting iron weapons, which can melt the fuel that can melt steel.

2. What is the difference between white charcoal and ordinary charcoal

White charcoal is also called white charcoal, which belongs to charcoal products, but compared with ordinary charcoal, white charcoal is different:

1. Different carbonized temperature

White charcoal is a high -temperature charcoal. The carbon with a carbonized temperature of 700 C is called high -temperature charcoal, while the carbonization temperature of white charcoal is as high as 2000 C.

2. Burning temperature is different

When the white charcoal is burning, the temperature can reach about 1000 C, which is much higher than the 500 C of ordinary charcoal.

3. Different combustion effects

After high -temperature refined white charcoal, it has the combustion effect of smoke -free and fire, and ordinary charcoal dripping oil will fire.

4. Different sources of raw materials

Ordinary charcoal can be made with any wooden raw materials, and the mechanism can even use agricultural and forestry waste; white charcoal needs to use hard wood.

5. Different market prices

The price of white charcoal is much more expensive than ordinary charcoal. Ordinary charcoal is generally one yuan to a few dollars a pound, while the price of white charcoal is about 2-10 yuan per catty, and the expensive is even more than ten yuan per catty.

What is white charcoal?

White charcoal is a technology of firing charcoal. In addition to the different firing method and ordinary charcoal, the differences in raw materials will also affect the quality of white charcoal. Not all wood can be fired white charcoal.

Generally speaking, the raw materials of white carbon must have at least 0.8 wood. Ordinary fruit wood and birch can also be fired.If you want to burn high -quality white charcoal, you still need to use the tree of Tochigi. Commonly used such as Wugang Masa, Qinggang , and other ingredients such as .

Profile

Guangdong Wannian, alias, ribs, bright silk grass, Guangdong Wannian, also known as throat sword, winter without withering, etc., which is a perennial evergreen herbal plant that belongs to the ribs of the ribs of Tiannan Sinology.Areas are mostly born in dense forests.

The rhizomes are thick and short, there are foil roots at the section, the leaves are clustered, and the lanceolate is wide, hard and shiny.Blossoming from April to May, the spikes are top, the flowers are small and dense, the color is white and green, the berry is spherical, from green to red, and it does not fall through winter.

Native to India, Malaysia, China, and the Philippines are also distributed, and Nanhai County, Guangdong and Nanhai District, Foshan.

Nickname

Coarse ribs, bright silk grass, Yue Wannian, open throat sword, winter without withered grass, etc.

Suitable place

1. Place in a negative position

Everything is divided into yin and yang, and plants also need to be able to follow this rule. Everyone is a hard plant and should be placed in a negative position in order to have a better Feng Shui pattern.It is better to be placed in a shade environment.

2. Place in the bedroom

Wan Nianqing can consider placing in the bedroom, which can help the owner recommend a family of Feng Shui, and it can also be conducive to husband and wife harmony, especially for people with rabbits and tigers. Putting Wannian in the bedroom can make their fortunes more prosperous.Daily travel, etc., can also protect peace, and life can be more heartbroken.

3. Place in the living room

Wannianqing is a perennial herbaceous plant. Generally speaking, it is placed in the indoor environment, especially in winter, because the cold resistance of such plants is average. If it is relatively cold in the winter, it is easy to frosting plants outdoors in winter.For plant maintenance, you can consider placing plants and other plants in the living room.

4,Consider your own attributes

When considering which room is placed in Wannianqing, you need to be able to comprehensively consider it in conjunction with his own attributes. Wannianqing is a plant with five elements of water.It can make the owner have a better aura and make the owner want to achieve things.

5. Consider the Feng Shui pattern

Wannianqing is a kind of auspicious plant that adapts to the comprehensive consideration of the area and the natural environment. From the perspective of the growth environment, Wannianqing is a negative plant and can be placed in a yin environment such as the bedroom.The influence of environmental Feng Shui needs to be paid attention to.

Effectiveness and role

Medicinal value

The whole plant is admitted to the medicine. According to the "Lingnan medicine record": take its leaves and the same pot with the same pot, it can cure blood, blood cough, large intestine heat, pediatric lubine and other symptoms.And stems and chip sugar are smashed, you can apply rabies to bite.In addition, you can use all grass to treat snake bite, sore throat, sore throat, scabies swelling, and fried water to wash hemorrhoids.

Sexual flavor returns: Xin, slightly bitter, cold.There are small poison.

Indications: clearing heat and detoxifying, swelling and pain.For Dog bite, snake bite, sore throat, urethritis, enteritis, lung fever cough.Turbal use of scratch swelling and poisoning, pediatric prolapse of the anus.

Dosage: Oral: decoction, 6-15g.External use: appropriate amount, mash the juice with rinse; or pound; or fry water.

Harvest and storage:Rhizome, harvest after autumn, use fresh or sliced dried.Stems and leaves, harvested in the late summer, use or cut into sections, dry.

Viewing value

In addition to the Outdoor Decoration of potted plants, leaves can also be cut as flower arrangements or decorative Outdoor environments.It belongs to the common variety with silver and brighter silk.

You can make the leaf bonsai in Guangdong Wannianqing, without trimming and binding, choose the form of natural growth, you can plant single plants, double -drying, oblique dry types, etc., and can be planted in shallow pelvis.The vertical and diagonal form is placed on one end, and the other end can be equipped with exquisite stones, and then the pot surface is covered with moss, and the evergreen grass is embellished on it, which can show the poetic and paintings.Use Guangdong Wannianqing to make concept

Ye bonsai is simple and easy to highlight the beauty of nature.According to its extremely shaded characteristics, the furnishings room can be seen, which can maintain the green seasons and enduring.

Purify the air

Guangdong Wannian can remove harmful substances such as nicotine and formaldehyde. Wannong also has the role of absorbing indoor gas exhaust gas, release oxygen, and purifying the indoor air, especially for the elderly with weak immunity.

Breeding method

illumination

Afraid of direct light, it needs to be kept in half shade, or 70% shades.The maintenance of the indoor, try to put it in a bright place, and move to the Outdoor semi -shade or shade for a month every one or two months to allow it to accumulate nutrients and restore growth.

Humidity/watering

Like a humid climate environment, the relative temperature of the air that requires the growth environment is 60-75%.

temperature

The most suitable growth temperature is 18 C to 30 C. Avoid cold and frost. The wintering temperature needs to be kept above 10 C, and the temperature drops below 4 C to enter the dormant state. If the ambient temperature is close to 0 C, it will die due to frostbite.

soil

Guangdong Wannian likes to be loose and fertile, rich in humus, and well -drained slightly acidic soil.Potted soil can be prepared with peat soil or fine sand soil and a small amount of Fertilizer.

Fertilize

In the spring and autumn seasons, the rotten cake Fertilizer water is applied every 3 to 4 weeks, which can make the plants grow strong and green.During the growth period, the liquid Fertilizer based on nitrogen fertilizer is mainly used every two weeks.

Frequently problem handling

Breeding method

1. Subtractional method

Generally, the pots of pots are combined from February-March, and the clusters of plants are divided into several plants with roots and planted separately.It can also be planted in other seasons.After three years after division, it can be divided again.

2,Sowing method

Broadcasting is generally performed between March-April.Bow in the Flower pots of the well-cultivated soil, and temporarily put the shade in the shade after watering, and keep it moist. Under 25-30 degrees, it can germinate in about 25 days.The water supply during the growth period is sufficient. summer leaves every morning and evening in the summer, and the growth of stems and leaves in winter and leaf grows slowly. The water should be controlled.The southern region is often maintained in summer.From May to October, the stems and leaves were fertilized once every half month.Moving into the room in winter is yellow, and the nitrogen fertilizer is applied once.After a few years of growth, the mother plant is often stubborn and poor, and should be renewed again.

cutting matrix

It is the nutrient soil or river sand, mud carbon soil and other materials used for cuttings.Family cuttings are limited to the ideal cutting matrix. It is recommended to use the cuttings that have been prepared and disinfected by this site; it is also possible to use the thick river sand, but it must be rinsed with water several times before use.Do not use river sand in the sea sand and saline -alkali areas, they are not suitable for the growth of flowers and plants.

Selection of cutting branches

The branches used for cuttings are called cuttings.Cut the stem poles into a section of 5 to 8 cm long. Each section can be brought with more than three leaves.

Prevention and treatment of pests and insect pests

1. Leaf spot disease

This disease occurs on the leaves of the evergreen. The weather with high humidity is likely to occur.At the beginning of the lesions, the brown spots were soaked in the surrounding area, and the rotary -like expansion was expanded.In the center of the diseased spots, dark brown mold spots appeared, and the dark brown mold layer was turned under humid conditions.The method of preventing this disease is to remove the diseased leaves in a timely manner; 0.5%-1%Bordeaux (or 50%multi-bacterial spirit 1000 times solution) can be used at the beginning of or or later.

2. anthracnose

The disease also occurs on the old leaves, and it can spread to the petiole in severe cases.In the early stage of the lesion, the small yellow spots of water, the oval to irregular brown or yellow brown after expansion, which shows a slightly wheel -shaped shape. Later lesions are connected into a dry -shaped black dot.EssenceThis disease is mainly due to poor ventilation, and there is a favorable illness when the hazard is harmful.The method of preventing this disease is to strengthen maintenance, add phosphorus and Potassium fertilizer; at the beginning of the onset, 0.3%-0.5%equivalent Bordeaux (or 60%Daisen zinc 800-900 times solution, or 70%todbin 1500 times liquid)spray.

3, brown soft

This insect food is complicated and can endanger many plants. Wannian is one of the harmful flowers.When brown softness is harmful to plants, the general cluster is on the leaf surface or tender leaves, stabbing plant liquid juice, and excretion of mucus at the same time.Growth is weak, and the leaves are yellow, which hinders viewing.When severe occurrence, the branches are covered with worms, causing the plant to yellow and affect growth.

Control method

If there are fewer plants or the number of insects is not large, it is generally possible to use bamboo and other objects to scrape the insect body;

In the Narcus incubation period, it can be sprayed with a 40%liquid lotion 1000 times liquid (or 40%oxidation music oil 1000 times liquid), and it can also be sprayed with 5%amine sulfur emulsion 1000 times solution.

Main point of maintenance

Guangdong Wannian is very durable, and the bright scattered light has grown.Like the north side of the building, the trees are suitable. The sun can be seen in the spring and autumn and evening. In summer, the sun should be avoided.The soil should be kept humid during the growth period; in the summer, spray water twice a day to hydrate and cool down, and clean the leaves of the leaves.From 5th to October, the cake Fertilizer water is applied every half month, and the leaves can be kept green and bright.If you use water, you can grow well in a small amount of long -acting flower tablets or compound Fertilizers in the container.

The cause and method of preventing the yellow chloroplasite

1. Stems and branches dense

Guangdong has strong branches, especially the most roots of the roots (the short -section is sprouting between branches). Due to the tight plant spacing, the air becomes yellow and yellow.Therefore, a moderate deletion of branches should be carried out to stretch the leaves and ease.

2. Poor air permeability of soil and potting

Guangdong is a meat root, which requires soil loose and breathable, good drainage performance, and potting soil is better for slightly acidic sandy loam soil. So the root system can develop and strengthen plant nutrition in a timely manner.The Flower pot must also be breathable. If you use a glaze basin, you should put a small layer of gravel on the bottom of the basin, and then plant it.

3. Dark light

Although Guangdong Wannian is strongly resistant to negative, it will be placed in the dark and air occlusion of light and air occlusion in the corner of the room for a long time, which will make the lower lobe withered and the stems are thin and weak.Outdoor maintenance of time.Be careful not to put it under the scorching sun, so as not to burn the blades.

4. Water deficiency

Guangdong's youth is humid and humid. During the growth period, a certain amount of water is needed to maintain a certain soil humidity.

5. Fat

Deficiency of Fertilizers will not only make the leaves yellow and weak leaves, but also accelerate the aging of the leaves until yellow.Therefore, nitrogen fertilizer should be applied to nitrogen fertilizer in the budding period, and liquid Fertilizer mainly based on phosphorus and potassium should be applied during the growth period to prevent stems.

6. Long planting period

Guangdong Wannian Gen has grown rapidly, and it takes a long time. For example, the Flower pot is too small, the root system is full of pots and cannot stretch, which will make the pot soil settle. In addition, the nutritional elements in the soil, such as iron, calcium, magnesium, etc.Periodic topdressing is not available.At this time, it is necessary to change the pots and soil in time. This is one of the key to the strong plant growth.

7. Temperature discomfort

In summer, Guangdong should be placed in a cool and ventilated wetland, and it needs to be kept room temperature above 5 C in winter to not cause frost damage.After the room is out of the room, the lower leaves fall in the plants, and the branches or short stems should be deleted appropriately. After a period of cultivation, it should be a pot of green and cute decorative plants.

8. Facial pollution

Sprinkle the Fertilizer on the leaves during fertilization, or splash the soil to the leaf surface during watering, or place it on the indoor leaves for a long time, and the water spraying the water in time will cause the lower leaves to chuck.Always keep the leaves clean.

precautions

1. Guangdong is like a wet environment, afraid of direct sunlight, and can grow in the shade for many years. For a short time exposure, the leaf surface will also become white and yellow.The suitable growth temperature is 20-28 C, which is not cold, and it needs to be maintained above 8 C in winter.Temperature is too low and is susceptible to frozen damage.Once the leaves are fallen, they will die.

2. In the summer high temperature season, water must be poured once a day in the morning and evening. In addition, water should be sprayed on the surrounding ground to improve the air humidity.Watering in spring and autumn should master dry and wet, and watering should be controlled in winter. If the pot soil is too wet at this time, the leaves will easily turn yellow and cause root rot.During the growth period, the pot soil cannot be overpowered, otherwise the lack of water will easily make the leaves wither and fall off.

3. spring and autumn seasons are used every 15 to 20 days to apply nitrogen -containing and potassium -containing liquid Fertilizer. Fertilization should generally stop fertilizing.

4,Guangdong Wannian likes to be loose and fertile, well -drained cultivation matrix, and is not tolerant to salt and alkali.Potting soil can be mixed with rotten soil, garden soil and a small amount of river sand.Generally, it is changed once every 1 to 2 years.

5. The mother plant that has grown for many years is often stubborn and has a poor posture.Commonly used divisions and cutting methods.The temperature of the cuttings is 25-30 C, and the relative humidity is about 80%, and the rooting is about 1 month.The potted soil for potted plants is 3 parts of rotten soil, 1 part of the loam, and 1 mix of coarse sand, and add an appropriate amount of bottom Fertilizer.During the growth period, keep the pot soil moist and high air humidity, so that the humidity of the air is not less than 40%. Pay attention to Shading in summer. Put a thin acidic Fertilizer water every 2 weeks.In the spring, the plant is changed once every spring.

6.Water in room temperature (soft water); pour more in spring and summer, and less pour in autumn and winter.March -August is applied every two weeks of thin (low dose) Fertilizer.Pot soil is kept warm and manifested to provide indirect humidity; but do not spray too much to avoid leaf spots.Young plants are turned over the pots of general pot soil every year, and adult plants depend on the situation.

1. The advantages of the overall Wall cabinet

1. Fashion and environmental protection

In the previous home decoration, it was mainly made and purchased the finished products through the on -site woodwork.The former can be tailored, but the quality is not easy to control and inadequate; the quality of the finished product is stable, but it cannot match the home space.The overall Wall cabinet not only absorbs the advantages of the two, but also matches various sizes and changes.In addition, it is a factory production, which is simple and fast installation, saving the time -consuming and troublesome of hand -made, suitable for young people with busy work.

2. Save space

The overall Wall cabinet can be designed according to your needs, and the top space can also be placed in the bedding or toys that are tired of children.Then through the choice of hip -to -door tone through the Wall cabinet, it is integrated with the decoration of the entire room.If your bedroom is large enough, you can also use the overall Wall cabinet to design a step -in cloakroom with a stylish sliding door outside, and a private space is made.

3. Economic and practical

The overall Wall cabinet is not only because of its practicality, but also because of the reasonable use of space, there are many economical.Its cost is calculated based on the area of the cabinet, and different internal configuration prices are different.The total price per Square meter with a total area is the total price.

2. How to install the overall Wall cabinet

1. Measurement of the overall Wall cabinet

The cabinet of the entire Wall cabinet can be both walls, or so sandwiches. Be sure to achieve the top and bottom Levels at the bottom.If there are errors, the height difference between the left and right sides of the hole is required to be less than 5mm. The bottom wheel of the Wall cabinet door can be compensated by the debugging system.

2. Equipment of all Wall cabinet drawers

The cabinets of the entire Wall cabinet generally have drawer planning. In order not to affect the use, pay attention when planning the position of the drawer: When making three sliding doors, you should avoid two intersecting places;On the side of a door; when the folding door is made, the drawer should have 17cm open space from the side wall.

3. Equipment for all wall cabinets

When making the cabinet, the scales of the trajectory must be reserved.

4. Equipment of all wall cabinets

The professional and guaranteed cabinet doors are generally completed by professionals. The process is: fixed top rails, the front of the trajectory and the appearance of the Wall cabinet on the same plane, and the upper and lower rails are placed in a reserved position.Then put the two doors into the trajectory, use the straight degree of the door with a horizontal or straight foot to adjust the position of the upper and lower rails and fix it; check whether the door body is parallel to both sides, you can regulate the bottom wheel to regulate the door body and reach the reach to reachThe border is with the Levels on both sides; finally the anti -jump equipment is fixed and the quality protection book is presented.

3. precautions for the installation of the overall Wall cabinet

1. Before installing the overall Wall cabinet, you must do a good job of inspection. If you find the problem, you need to feedback and solve it as soon as possible.Also carefully check the good drawings to set the installation order.

2. During the installation of the overall Wall cabinet, we must avoid being destroyed by the product component. The beam, the top line, and the corner of the closure plate must be cut to prepare to ensure that it is correct.

3. If there is a problem during the installation process, the installation workers need to fill in the installation notes and do a good job of tracking services.

4. After installing the overall Wall cabinet, you must self -check and adjust it, and then the customer accepts the signature confirmation.

1. Is the Inflatable sofa suitable for Outdoor use

When Outdoor Camping, if you want to improve the comfort, you can consider replacing the folding stool with an Inflatable sofa. The Inflatable sofa is very suitable for Outdoor use:

1. On the one hand, when the Inflatable sofa is not inflated, the entire volume is very small, similar to a shopping bag, the storage is easy, the weight is also very light, which is more convenient to carry than a folding chair or folding stool.

2. On the other hand, when outdoors, the Inflatable sofa is used to use, giving people the same as the sofa at home, and you can also control the degree of inflatableness and adjust the filling air switch at any time. Choose the hardness of your own hardness. How to be comfortable how to be comfortableJust lie.

In summary, when outdoor activities, inflatable sofas can bring people a higher comfort and happiness. If you like outdoor activities such as picnics and Camping, you can consider buying an Outdoor Inflatable sofa.

How to choose Outdoor inflatable sofas

The Inflatable sofa is suitable for Outdoor activity. There are many Inflatable sofa products on the market. When buying, the main point is to pay attention to the following points:

1. Material and quality

Choose high -quality Inflatable sofa materials, such as wear -resistant PVC materials or nylon materials.Check whether the seams of the Inflatable sofa are firm and whether there are obvious gaps or cracks.In addition, you can also refer to the evaluation of other consumers and choose the quality and reliable Inflatable sofa.

2. Size and weight

Select the appropriate Inflatable sofa size according to your own needs and use scenarios.If you need to use it in outdoor activities, you can choose a lightweight Inflatable sofa that is easy to carry; if it is used indoors, you can choose a larger Inflatable sofa to provide a more comfortable seat experience.

3, inflatable method

The Inflatable sofa generally has two ways: manual inflation and electric inflation.Manual inflation needs to be inflated by blowing or using a pump, which is suitable for Outdoor use; electric inflation is more convenient. You only need to insert the power to complete the inflation.Select the appropriate inflatable method according to personal preferences and use scenarios.

4. design and comfort

The design of inflatable sofas is diverse, including different shapes, colors and styles.Choose the design that conforms to personal preferences and home style. At the same time, pay attention to the comfort of inflatable sofas. You can choose a style with back and armrests to provide better support and lying comfort.

5. brand and after -sales service

Choosing well -known brands or manufacturers with good word of mouth can ensure the quality of the product and the reliability of after -sales service.Before buying, you can check the user's evaluation and after -sales policy of related brands, and choose a reliable Inflatable sofa.