1. How to place the Flower stand

1. Porch partition

Modern families use soft partitions in the living room, restaurants, or porchs, but although soft partitions such as glass and bead curtains increase the indoor permeability, it will inevitably look monotonous.Therefore, the Flower stand was placed at the entrance at the porch to increase creativity and aesthetics.

2. Corner

Whether it is the corner of the door or in other corners of the living room, a retro -shaped iron Flower stand can be placed.

3. Under the wall wall

If the wall designed by the photo wall is blank, it is definitely the best choice to put a Flower stand.

4,Both sides of the TV Background wall

In addition to the above matching methods, the interior can also be placed on both sides of the TV Background wall. If the style of the Flower stand can be consistent with the TV background wallpaper wallpaper, the effect will be better.It is also possible to choose to place next to the sofa, but people often walk around the sofa, pay attention to safety.

Second, the living room Flower stand placed Feng Shui

1. Don't just right to the door

Try to avoid the appearance of the door when placing a Flower stand in the living room, otherwise it will easily lead to worse Feng Shui in the home, affecting the normal development of our normal life and fortune.

2. Don't place it at the aisle

When we are placing a Flower stand, we must also avoid placing the aisle, because there is a channel for the crowd, and if it is placed on the aisle, it is easy to scrape the flowers.

3. Do not have edges and corners in the Flower stand

When the Flower stand is placed in the living room, be careful not to have corners, because the living room is where there are many crowds. If the Flower stand with edges and corners is likely to scratch people and bring bloody disaster to the home.

General installation steps of lawn Lights

When the lawn light is installed, the lamp shell should be turned on, the light source and the supporting electrical appliances are installed, and the leading line is attracted from the thread hole to the bottom of the light pole.The flange is aligned with the basic embedded piece screw and stands vertically.Then use a nut or flattener to tighten the nut.

1 , Embedded pipeline.When the lawn lamp is wiring, a wire that is smaller than the power distribution phase wire is used as the ground wire to connect the metal shell of the lamp or the lamp column, and the ground wire is connected to the "ground" of the system.If the length of the ground line is in 25 When the meter is above the rice, the end is repeatedly grounded, and the repetitive ground can be buried. 4mmx40mm ,long 25 Dillarly flat iron of rice, beat 5 Extremely connecting ground, grounding pole adoption 5 50 Galvanized angle steel, long 5 Mi, vertically hit the ground, is welded from the grounding pole to the galvanized flat iron.

2 Foundation.The basic pouring work of lawn Lights is generally done in the early stage by construction workers, but it should be noted that the embedded pipeline needs to be used to avoid normal use in the later stage.

3 , Install lawn Lights.Open the packaging of the lawn lamp and check the integrity. Refer to the product manual to assemble the lamp.The usual method is to turn on the shell, install the light source and supporting electrical appliances, attract the leading line from the thread hole to the bottom of the light pole, then link the light head and the light rod.The stubborn screws are aligned and standing vertically.Then use a nut or flattener to tighten the nut.

4 , Power cable wiring.The wiring of lawn Lights is best carried out by a professional electrician master. At the same time, it is necessary to do safe and reliable grounding, so as not to leave potential risk factors for later use.

Pay attention to safe and reliable grounding in the installation of lawn Lights

When the lawn lamp is wiring, a wire that is not less than the power distribution line is used as a ground wire to connect the metal shell of the lamp or the lamp column, and the ground wire connects the "ground" of the system.When the length of the ground line exceeds 25 meters, the end of the end is repeated. Repeated grounding can bury a 4mmx40mm, 25 -meter -gross -zinc -galvanized flat iron, hit 5 grounding poles.The vertical hitting underground, the grounding pole is both welded with the galvanized flat iron, and the ground resistance is required to be less than 4 Euros.The grounding pole of the light rod must be welded firmly, tiny at the joint, and the PE protective line of the street light power supply must be pressed with a spring cushion to the top and then screw the nut.For example, when we are greater than 25 meters, we need to do again repetitive ground at the end. Then repeat the grounding is a galvanized flat iron with a length of 25 meters in length. At the same timeAfter the vertical hit the ground, welded.

Pay attention to the pitch of lawn light installation

lighting is 0.5 meters high and 23 watts of energy -saving lamps require a distance of about 11 meters. This is the best lighting effect and can save a lot of costs.The distance between the garden Lights is about 25 meters, and the lawn Lights depends on the specific conditions and requirements. Some rockery and pavilions will be installed more.

The installation of lawn Lights is a problem that needs to be considered in multiple aspects. When the user is installed in specific installation, you must also pay attention to it. You must choose good quality lamps, especially in more humid places.Lights.The installation of the lawn Lights can ensure that the installation effect is good, and it can also have a safe effect, so that the effect of use can be better displayed.

1. Selection of folding lunch break bed

1. Look at elasticity: Lie down in person, and turn left and right a few times. A good spring will not be moved or uneven, and can immediately restore the original shape.

2. Look at the stability: You can use both hands to shake and shake the product back, left and right, and the bed is firmly explained.

3. Pay attention to the quality of the bag: If you buy the leather, you can use the tip of your two fingertips to pull one place and pull it up. The feel is powerful.

4. Look at the process: If it is a lunch break in the steel frame structure, the welding should be Smooth, no gap, and the coating looks uniform and soft.

2. How to use folding lunch beds

1. How to put the folding lunch bed flat

First take out the folding lunch break, then find a suitable position, and open the self -stick rope of the folding lunch bed, and place it against the wall.Then fold the folding lunch bed, slowly open it, and open the folding lunch bed to open the flat flat.After the break at the lunch break is flat, first hold the foot on the right bed, the right side is opened, then the left bed foot is opened, and the bed feet on both sides are firm and whether the middle is flat.Finally, just put the completely folding lunch bed flat.

2. How to put it in the folding lunch bed

The folding lunch break is not in time, you can press one of the folding bed at 4 minutes.You can easily fold the folding lunch break. After folding, use the protection buckle to directly buckle.This is the method of opening and closing the folding bed correctly.

What are the principles of Fountains?

Introduction to Fountain Principles

The principle of the Fountain is that the amount of mobility is conservative. From a large radius pipeline to a small radius pipeline, it generates a change of speed and rushes to the direction of the ground.The speed of the diameter is driven by the pump. The speed in the small radius is the original speed, which is transformed by the momentum conversion.You need to choose a micro -dollar to calculate the momentum conservation, so that you can find a speed. This speed is the exit speed, and then a toss of movement. This is an ideal situation. There is no friction and no wind.

Type of Fountain

In general, the Fountain landscape can be divided into two categories:

The first is to adapt to local conditions. According to the terrain structure at the scene, it is made from natural water scenery, such as: wall spring, Yongquan, Wuquan, Tube flow, streams, waterfalls, water curtains, water falls, water turtle, vortex, etc.

The second is to rely on the artificial landscape of Fountain equipment.This type of water scenery is widely used in the field of construction, with rapid development and a variety of types. There are music Fountains, program -controlled Fountains, swing Fountains, Running Fountains, bright Fountains, amusement fun Fountains, ultra -high Fountains, laser water curtain movies, etc.

Classification form

The Fountain is an artificial plastic surgery or a natural spring pond, which is sprayed with beautiful water positions for people to watch.The Fountain is an important part of the garden.In modern gardens, in addition to plant landscapes, Fountains are also important landscapes. It is both a kind of water scenery art, reflects the combination of movements and quietness, forming a bright and lively atmosphere, giving people a beautiful enjoyment. At the same time, the Fountain can also increase the air in the air.Negative ion content plays the role of purifying air, increasing air humidity, and reducing ambient temperature, so it is loved by people.There are many types of Fountains, which can be divided into the following.

(1) Ordinary decorative Fountain consists of various flower patterns to form a fixed Fountain.

(2) Combining Fountain Fountains and sculptures with sculpture form a landscape.

(3) Water sculpture is shaped by artificial and machinery to form a variety of large water pillars and forms landscapes.

(4) Self -control Fountain uses electronic technology to control water, light, sound, color, etc. according to the design program to form strange and changeable landscapes.

(5) In addition to the above types, there are also high Fountains, drought Fountains, stacking spring, music Fountain, Running spring, jumping Fountain, floating Fountain, sketch spring, Italian spring, music Running spring, etc., can also be formed by spraying to form by sprayingUnique water scenery.

The main form of water supply of Fountains is: DC water supply, water pump circulating water supply, and water supply of diving pumps.

The Fountain spray head is the main working part of the Fountain art modeling. Its role is to form a gorgeous water splash with a certain pressure of water with a certain pressure, spray it over the water surface.A variety of different nozzles configurations can create a variety of water scenery and landscapes, which are exciting and exciting and producing wonderful artistic effects.There are many types of Fountain spray heads. According to different structural forms, they can be divided into direct, rotating, water film, suction, atomization and other types.There are many types such as ice tower, open screen and spray nozzle.

With the application of light, electricity, sound, and automatic control devices on the Fountain, the emergence of music Fountains, intermittent Fountains, laser Fountains, etc. have enriched the content of the Fountain and enriched people's dual feelings in visual and hearing.The famous Fountains in the history of my country such as Beijing Yuanmingyuan Daishui Fountain Group, modern Fountains on both sides of Beijing Tiananmen, and temporary Fountains on the National Day Tiananmen Square are very magnificent, winning the praise and applause of Chinese and foreign tourists.

Fountain

The Fountain was originally a natural landscape, the ground appearing on the ground.The Fountains in the garden are generally decorated with decorative water spraying devices for landscaping.The Fountain can moisturize the surrounding air, reduce dust, and reduce the temperature.The fine water beads of the Fountain hit with air molecules, which can produce a large amount of negative oxygen ions.Therefore, Fountains are beneficial to improving the appearance of the city and the physical and mental health of residents.

Appreciation of the world's first Fountain picture

On the beautiful landscape of Canberra in the Australian capital.There is an artificial Fountain with the highest spray in the world.This Fountain was established by the Australian federal government in 1970 to commemorate Captain Cook for 200 years.Named "Captain Cook Memorial Fountain".

The spray port of the Fountain has 750 horsepower power and has two layers of water pumping systems.The Fountain has a spray speed of 200 kilometers per hour.The maximum jet limit is 150 meters.Looking at it from a distance, a water pillar on the lake was flushing the sky, the waves splashed, and they were spectacular and were become the world's first Fountain.

1. How about the garden light for Solar lamps?

The courtyard light is an Outdoor lamp. It can be used as decorative items during the day. At night, the Lights can be emitted to bring us light. Many parks, squares and other areas will be installed with courtyard Lights.

Solar courtyard Lights are a type of garden lamp. It uses Solar radiation energy as energy. It uses Solar panels to charge the battery during the day. At night, the battery is used to power the courtyard light source.Safe energy saving and pollution -free, and energy saving and environmental protection. Today, it is a better outdoor lamps that advocate green development.

2. Analysis of the advantages and disadvantages of Solar garden Lights

Solar courtyard Lights are composed of Solar battery components, brackets, brackets, light rods, lamp heads, special light bulbs, batteries, battery boxes, floor cages, etc.Regional lighting and decoration, such Solar garden Lights have both advantages and disadvantages:

1. The advantages of Solar garden Lights

(1) Green and environmental protection, high safety factor, small operating power, no hidden safety hazards, can also be recycled, small pollution to the environment, is a green lamps with energy saving and environmental protection.

(2) The light is healthy, the light of the Solar courtyard light is soft and not dazzling. The light does not contain ultraviolet and infrared rays, does not generate radiation, and has no light pollution.

(3) Life is long. Because the semiconductor chip is glowing, there is no filament and glass bubbles, and the accumulated life can reach tens of thousands of hours, which is higher than ordinary courtyard Lights.

(4) High use efficiency, can effectively convert solar energy into light energy. 90%of the power can be converted into visible light, which is much higher than ordinary incandescent lamps.

2. Disadvantages of Solar garden Lights

(1) Unstable, in order to make solar energy continuous and stable energy, and ultimately become an alternative energy to compete with conventional energy, we must solve the problem of energy storage well, that is, storage of sun radiation energy as much as possible.For night or rainy days, the problem of energy storage is the weakness of Solar use.

(2) The cost is high. Because of the efficiency and instability, the cost of Solar courtyard Lights is still relatively high. The cost -effectiveness cannot be compared with traditional conventional Outdoor courtyard Lights. To further develop, it needs to solve economic problems.