Articles in Categorys Balcony Garden

1. What types of road Lights are

1Divided by the height of the street lights: high rod street lights, middle rod Lights, street lights, courtyard Lights, lawn Lights.

2Divided by street lights: hot -dip galvanized iron street lights, hot -dip galvanized steel street lights and stainless steel street lights.

3Divided by the street light source: sodium light street lights,ledStreet lamps, energy -saving street lights, new type of Summing street lights.

4Divided by styling: Chinese Lights, antique Lights, Landscape lights, single -arm street lights, arms street lights.

5Divided by power supply: city circuit lamps and Solar street lights and complementary scenery street lights.

There are many types of street lamps. Different lighting technologies are suitable for different needs. The fundamental purpose is to design a high -efficiency electronic energy -saving street light with long life, low power consumption, high power factor, and small current harmonic content.

2. What is good for street lights

The street lighting is generally used for high -pressure sodium lamps,Metal halide lamp is also a common source of street lights.From the perspective of lighting, incandescent lamps are the best, but the light flux is low and the light effect is poor.fluorescent lampThe same is the fluorescent lamp. The light emitting principle depends on the gas electrical ionization to stimulate fluorescent powder to light up. Its color rendering is low, but the light flux and the light effect are much better than the incandescent lamp. The neon Lights are almost no other benefits except for good -looking.Extremely low, you cannot do special lighting Lights; the performance of metal halide lamps is very good, especially its power can be made very much than other lamps; LED lights are highly efficient and energy -saving and environmentally friendly, but there are certain certainty.Technical defects.Therefore, in general, it is more appropriate to use metal halide lamps or LED street lights now.

What is the difference between street lights and Landscape lights

1Different height

The difference between street lights and Landscape lights is mainly reflected in the height. The conventional height of street lights is6-12Mi, there are also some routine heights of some street lights are6-20rice.But the general height of Landscape lights is3-6Mi, this is because Landscape lights are ornamental. You do nt need to do too high. The higher the materials you need, the more expensive the cost.

2Different lighting power

Because the street lights are to provide sufficient illuminance, their lighting power is generally large, generally in250-400WWithin the range, the specific power is considered according to the width of the road, the surrounding trees, the height of the light rod, and whether it affects the surrounding residents.

Landscape lights are relatively small, generally80-150WIt may also be smaller, because the landscape lamp has a basic lighting effect. Its biggest effect is to provide strong ornamental. Its light source power can reflect the overall shape of the lamp.Too bright.

3Different applications

street lights are generally used in the main roads, secondary roads, urban squares, communities and other places in cities or villages. lighting needs are generally relatively large.

Landscape lights are generally installed in independent areas, such as parks, gardens, high -end communities, commercial pedestrian streets and leisure squares. Landscape lights are also used in many tourist attractions.

4Different functions

The main role of road Lights is lighting, which must be able to provide pedestrians and vehicles with better lighting.But Landscape lights only need basic lighting. The most important thing is viewing, which is used to decorate the surrounding environment and create an atmosphere.

The shape of the street lights is not so diverse, and there are generally several types.But the Landscape lights have a lot of shapes, very casual and unrestrained.It can be customized according to the surrounding environment and special reasons.

[Teng Tool furniture] What are the benefits of vine furniture?

Material and classification of rattan furniture

Teng is actually a type of brown tung tree, but the external image is stubborn plant, the top of the vine leaves is stabbed, and the diameter of the rattan stem is only3 to 5 Cm, and the entire plant can grow up 200 The rice is long.The growth areas of vines are very wide, all of which are available in Africa, India, Southeast Asia, and Indonesia.

The characteristics of vine materials are:

1 , Dense, strong, light, tough, firm, and easy to bend;

2 , Dont be afraid of squeezing, not afraid of pressure, softness and elasticity;

3 , Strong regeneration ability. Teng is a fast -growing plant. The general growth cycle is 5 7 Year.

Viner furniture has the advantages of elegant color, beautiful shape, light structure, elegant appearance, tough texture, simple and natural and natural, and is mostly used in Liangtai, garden, tea room, study, living room, etc.

Teng materials are roughly divided into: vine, young vines and processing vines.

The rattan art furniture on the market is basically divided into the following categories:

Outdoor Furniture: such as small round tables, back chairs, lounge chairs, etc., and swing sofa armchairs;

living room furniture: The most perfect and most stylish of rattan furniture, a set of living room furniture made of red vine core, delicate, Smooth, shape and color in the shape and color, showing the beauty of craftsmanship;

Restaurant furniture: such as five and seven -sets of rough vine, tables, tables, novel shapes, full of times;

Small ornaments of rattan art: such as rattan art desk lamps, chandeliers, etc.For more information on rattan furniture, please click the rattan furniture online mall

藤器家具

The benefits of vine furniture

1 , Fresh and natural rustic atmosphere

The shape of the bamboo material is Smooth and delicate, can make a variety of beautiful bending, and can maintain a natural form of hollow and hollow, light and elegant, and have a certain sense of rhythm and rhythm.bamboo furniture is full of natural texture, which brings people an elegant, fresh, simple and elegant feeling, and has a strong and intimacy.The rattan furniture is natural and comfortable, filled with lively, warm, fresh and elegant taste, and rich rural colors.

bamboo and rattan furniture is solid and durable, rich in color, with fresh, elegant, and natural style. It contains elegance in the natural original, making the living room full of leisurely, quiet natural mood, kind, lively and lively, and vital governance.People are free and free during use, which satisfies the psychology of modern people's return to true.

藤编家具

2 Ecological environmental protection

The materials for bamboo and rattan furniture are fast -growing natural materials. The growth cycle is fast, the materials are early, the output is high, and the bamboo is renewed after the bamboo is cut. Therefore, the development of bamboo and rattan materials in modern furniture meets the principles of ecological thinking.They do not produce harmful substances during processing. bamboo uses special glue on bonding, which will not produce formaldehyde that is harmful to the human body.Therefore, the furniture produced by bamboo and rattan is not harmful to the living room environment.

The remaining substances produced by bamboo and rattan furniture during processing or waste products after use can also be easily handled. It can be burned or buried into Organic fertilizer, which will not pollute the environment.

3 , Rich in shape

bamboo and rattan materials have the characteristics of dense, strong, lightweight and flexibility.The vine material is extremely soft when it is full of moisture, and it is particularly tough after drying, so it is strong and elastic, and can be arbitrarily bended and shaped. Therefore, bamboo vine furniture is shape, elegant and Smooth lines, rich in shape.

In the production of furniture, a large amount of wrapped in the furniture skeleton and woven rattan noodles are made into furniture, which can be woven into rich patterns.bamboo and vine can also be used with other materials to use the specialties of various materials to make the furniture shape more colorful.

The vine utensils on the market are new, and the series is complete.On the basis of absorbing the traditional style style, the new design shape is combined with the principles of ergonomics and adopted high -tech computer design methods to maximize the physical and psychological needs of people.The chair is no longer a thin and independent style, but is full of flowing line aesthetic sofas. The traditional coffee table is traditional and trendy. There are both Western -style furniture that expresses European and American styles, but also Chinese -style furniture that interprets the Oriental atmosphere.In the original Chinese, it is slightly elegant, revealing nature in exquisite, and fully catering to the fashion taste of modern people.

藤编家具

4 , Exquisite craftsmanship

Compared with the full mechanization of wooden furniture manufacturing, the production of bamboo and vine furniture is currently based on handicraft production.bamboo rattan furniture production technology is mainly made of bamboo and vine, Most drums, empty, folding, songs Harmonious arc Combined, or form a different pattern pattern with a variety of different weaving techniques.The craftsmen are fine and detailed, and have undergone the absorption and refinement of ingenious craftsmen in the past. They have gradually formed a set of delicate lines and delicate composition, and their craftsmanship is extremely delicate and unique.

Profile

Hawaii coconut, also known as bamboo stem pocket coconut, Chevrole coconut, is a pocket coconut, also known as green stems, brown brown, root brown, heavy Buddha coconut, bamboo stems and exquisite coconuts.Hawaii coconut is distributed in Mexico, Borz, Guatemala and Honduras.Hawaiian coconut sex is high -temperature, high -humidity, yin resistance, afraid of direct sunlight; strong adaptability to the soil, but it is suitable for loose, humid, and drainage. It is advisable to have deep soil soil.Not only is the plants beautiful, but also easy to bloom seeds. The appearance of the branches and leaves is dense, the leaves are green, and the leaves are full of luster. The feathers are elegant, giving people a dignified, elegant, and beautiful beauty.The leaf and stems are conducive to purifying the air and beautifying the environment.

Nickname

bamboo stems, exquisite coconut, bamboo, bamboo coconut, Chevrole coconut

Morphology

The stems of the Nagatai coconut stems are upright, with a height of 1-3 meters.The stems are short, hollow, and the new buds of the stolons of the underground stolons are pumaging new branches, which grows in cluster without branches.The leaves are mostly the middle and upper part of the stems of the stems, which are full of feather -like cracks.The flowers are the inflorescence of the meat, and the axillary is born on the upper part of the stems, pink.Purple red.The fruiting period can be up to 2-3 months.

Suitable place

Hawaiian coconut leaves are dense and green, with thick leaves and luster. The feathers are elegant, giving people a dignified, elegant, and beautiful beauty, becoming a rookie for indoor leaf plants.It is extremely resistant to negative and is suitable for indoor cultivation and viewing. It can be used for greening decorations in the living room, study room, conference room, office, and other places.

Effectiveness and role

Regulate humidity

Hawaiian coconut has the function of regulating humidity. Especially when the indoor humidity is low in winter, as long as it is regularly watered by it, Hawaii coconut can keep the indoor humidity in a state of 40%to 60%.

Purify the air

The ability of Xiawei coconut to remove benzene, vinyl chloride, formaldehyde and other toxic gases is very capable. It is an ideal plant in purifying indoor air.

Family decoration

Hawaiian coconut is suitable for placing in a spacious space.Hawaiian coconut does not grow outward, giving people a straight and straight feeling, it is the best partner of bamboo or wooden furniture.It is easy to take care of it, green oil, strong vitality, without watering for a few days, it is not easy to turn yellow. Unlike other plants, it will fade without watering for a day.The leaves will not fall easily. Even if a leaf is going to fall, it must be corrupted for a long time to become yellow leaves, and then slowly fall into the place. Although it is corrupt, it will not be ugly.

Breeding method

illumination

Although Hawaiian coconut grows in a relatively warm place, this plant itself is not resistant to direct sunlight. It is more suitable for growing in a half -yin environment.It affects plants.Therefore, when lighting is usually made, it cannot be directly illuminated by strong light, otherwise it will affect the leaves.

Humidity/watering

Hawaii coconut is more suitable for humid environments, especially when it grows, it must be given enough water to make the pot soil moist.Although it likes to be humid, it can't be too wet, otherwise it will let its roots fester.Then in winter, watering should be controlled to keep the pot soil dry, but it should not be too dry, otherwise the leaves will become no shiny.

temperature

Hawaiian coconut was originally living in a warm place, so it prefers to grow in a warm place. The most suitable temperature is 20 degrees.In winter, the temperature should be maintained above 10 to not affect growth.Of course, it also has a little cold resistance, but it can only endure a low -time low temperature in a short time, so if you want it to go through the winter smoothly, it is best to adjust the temperature above 10 degrees.Maintain above 5 degrees.

soil

It generally prefers to grow in loose and fertile soil, so it must meet this requirement when choosing the soil.We can use some humus soil and garden soil, etc., mix them together, and then add some organic Fertilizers to mix well, we can be used as the cultivation substrate.

Fertilize

In the growth period of Hawaiian coconut, it needs to be applied to nitrogen fertilizer once a month, and then in September, it needs to stop applying nitrogen fertilizer. Just add phosphate Fertilizer once or twice to help it go smoothly.Then it will stop applying any Fertilizer in winter.

prune

Generally, you only need to cut off the leaves of the yellow disease, or only cut the tip of the leaves.When cutting the leaf, pay attention. If the leaf sheath becomes yellow, it must be peeled together. If it is not yellow, it can be peeled when it needs to be yellow, otherwise it will easily hurt the stems!

Frequently problem handling

Breeding method

Hawaii coconut can be sowed and divided into breeding.

seed seeds should be sowed with them, and germinated at about 3-4 months when the temperature is 25 C.

During the growth process, the underground roots can be extended horizontally and can adhere to the new buds and new branches. Therefore, in spring, the dense growing plants can be cut into breeding, and a new cluster contains 3-5 roots.When cutting, pay attention to less damage to the roots and keep each bus a certain root system, otherwise the recovery will be slow or even affecting survival.

Cultivation technology

Hawaii coconut can be sowed and divided into breeding.seed seeds should be sowed with them, and germinated at about 3-4 months when the temperature is 25 C.During the growth process, the underground roots can be extended horizontally and can adhere to the new buds and new branches. Therefore, the dense growing plants can be cut and reproduced in spring, and a new plant is planted with a cluster of 3-5 roots.When cutting, pay attention to less damage to the roots and keep each bus a certain root system, otherwise the recovery will be slow or even affecting survival.

Hawaiian coconut pots can be directly used in white plastic pots (or mud pots, plastic white plastic pots).It is advisable to use loose, good ventilation and water -rich matrix. Generally, it can be mixed with corruption soil, garden soil, and river sand.From March to October of the growth season, liquid Fertilizer or granular Compound fertilizer is applied every 1-2 weeks to promote leaf growth and thick leaves.The plant is exchanged for two years to 3 years.Following the rotten cake Fertilizer (such as sesame oil cakes, bean cakes, etc.), or poured with soaked cake Fertilizers, Compound fertilizer can also be used.Each fertilization before and after flowering, the water supply should be paid attention to.

The temperature requirements are 10 C.Cold resistance, its growth temperature is 20 C to 30 C, and it is not lower than 2 C in winter.During the growing period, it is required to keep the pot soil moisturizing. When the air is dry, the leaves should be sprayed often to improve the environment of the environment.Keep the pot soil wet and not dry to enhance the cold and wintering ability of plants.

Shawai's coconut growth requires brighter scattered light. To avoid direct light, otherwise the lobel color becomes lighter or yellow; strong negatives can grow in a darker environment in the indoor light for a long time.Generally, it will not have much impact on plant viewing for 1-2 months in the dark environment of the indoor.Avoid strong light. When placed outdoors in summer, it should be appropriately shaded.Yin resistance can be placed in any room in the three seasons of spring, summer and autumn, and placed in the sun in winter.

Under the conditions of high temperature and high humidity, brown spot disease and creammium disease may occur in Hawaii coconuts. This can be sprayed and killed with fungicide (such as multi -bacterial spirit or 1000 times liquid).

summer management

1. In the summer, it should be placed in a place where the sunlight is not shining outdoors, and the sun should be placed in the room in winter.

2. Change the water once a week in summer, and push it for one week in order in other seasons. The tap water should be placed for 10 hours or used in the sun for 2 hours.

3. Put 1-2 drops of nutrients at the same time.

4. The leaf surface spray more than 2 times a day to maintain the humidity and water of the leaf surface.

5. Pay attention to keep indoor ventilation.

6. If the rotten roots appear, just cut off the rotten roots and replace it with clean water.

What to do if the leaves are yellow

1. Fertilizer discomfort

When cultivating it, we all choose some rotten soil, river sand soil, etc., and then mix them with a small amount of organic Fertilizers to configure them into medium.This will be easier to survive in the early stage.Then wait for the 3rd to October each year, and apply liquid Fertilizer once every 2 weeks, so that the leaf color can be stronger. If the above are not done, then its nutrition is not available.The yellow leaves are also inevitable.Therefore, fertilization is also appropriate.

2. Humidity discomfort

When it grows, it is necessary to keep the soil moist frequently, and the air will not be too dry, otherwise the humidity will be reduced, so that the leaves will become non -gloss or even yellow.When the air is dry, we often spray water on its blades to increase the humidity of the air, so that its leaves can be thick and green.It can be seen that humidity is also a reason for the color of the blade.

3. Light discomfort

It is very afraid of strong light. If you accidentally let it be irradiated with strong light, the leaves will make the leaves yellow.It generally prefers the semi -yin environment, and it has a long time to resist, and it is okay even if it is staying in a dark place for 1 to 2 months.So when it is usually maintained by it, if it really gives it too much to the sun, it can only accept some bright scattered light.

4. Watering discomfort

Although its humid environment, it cannot make the water too sufficient, otherwise it will make the pot soil too humid, cause the root ulceration, the nutritional transmission of the plant, and then make the leaves yellow.Therefore, watering must be appropriate to keep the leaves green.

5. Causes of disease

When the temperature is extremely high and the humidity is extremely high, it will prone to some diseases. These diseases will directly affect its plants, so that it can not grow normally, and it will lack nutrition and cause the leaves to yellow.It is necessary to discover timely prevention and treatment in time to prevent the leaves from being harmed.

precautions

1. Xiawaii's coconut pot plant can be directly used in white plastic pots (or mud pots, plastic white plastic pots).It is advisable to use loose, good ventilation, and humus -containing substrate. Generally, it can be mixed with corruption soil, garden soil, and river sand.From March to October of the growth season, liquid Fertilizer or granular Compound fertilizer is applied every 1-2 weeks to promote leaf growth and thick leaves.The plant is exchanged for two years to 3 years.Following the rotten cake Fertilizer (such as sesame oil cakes, bean cakes, etc.), or poured with soaked cake Fertilizers, Compound fertilizer can also be used.Each fertilization before and after flowering, the water supply should be paid attention to.

2,The temperature requirements are 10 C.Cold resistance, its growth temperature is 20 C to 30 C, and it is not lower than 2 C in winter.During the growing period, it is required to keep the pot soil moisturizing. When the air is dry, the leaves should be sprayed often to improve the environment of the environment.Keep the pot soil wet and not dry to enhance the cold and wintering ability of plants.

3. Avoid strong light.Shawai's coconut growth requires brighter scattered light. To avoid direct light, otherwise the lobel color becomes lighter or yellow; strong negatives can grow in a darker environment in the indoor light for a long time.Generally, it will not have much impact on plant viewing for 1-2 months in the dark environment of the indoor.When placing outdoors in summer, it should be appropriately shaded.Yin resistance can be placed in any room in the three seasons of spring, summer and autumn, and placed in the sun in winter.

4,Under the conditions of high temperature and high humidity, brown spot disease and creammium disease may occur in Hawaii coconuts. This can be sprayed and killed with fungicide (such as multi -bacterial spirit or 1000 times liquid).

1. How long does it take to clean the cat sand pot

Generally speaking, parents need to clean the cat litter basin according to the excretion of cats every day. Generally, it needs to be cleaned 2-4 times a day (specifically to the actual toilet of the cat).It is worth noting that it is generally cleaned once every 2 weeks, and the cat litter basin should be cleaned once, and at the same timedisinfectionAfter dilution, clean the cat litter basin so that the cat litter basin can be better ensured, and the cat litter pot is completely cleaned so that the cat will be more willing to go to the toilet in the cat sand pot.

2. How to clean the cat sand pot

First clean the cat litter residue with water, and then pour it into the home disinfection solution for about 5 minutes, including the cat litter shovel and soak it together; then wash the disinfectant before using the water, take a pet -dedicated disinfection -dedicated disinfectant,Wash it once; finally clean it with water, and wash it with boiling water twice. You can completely wash the taste of the previous disinfection water and a more thorough sterilization. After drying the water, pour the fresh cat litter.

3. How to deodorize the cat sand pot

If you have cleaned the cat sand pot, but you can still smell a greater odor, then you can consider changing the entire pot of cat litter. You can leave it slightly when you replace it so that the cat can recognize that this is his own.bathroomEssenceThe amount of cat litter usually requires 5-10cm high, and the use of deodorant spray and deodorant powder can also help remove the odor.

[Correction training for pets biting furniture] How to deal with Dogs and bite items

What to do if Dogs bite items

First of all, considering whether the environment is not spacious enough, so that it cannot consume its energy, so I have to use my mouth to help consume excess physical strength.The second is the tooth replacement period. The puppies' milk tooth updates are discomfort when they are constant teeth. Dogs express it by biting items in order to solve some discomfort.The third is to accumulate evil to become a habit. When I was a kid, I had this habit, but it was stopped in real time. As a result, the habit became natural. The fourth is that the Dog's body lacks trace elements.

You can use the following five methods to correct this bad habit of Dogs:

1. Bring the Dog to the "crime scene" to give appropriate and consistent punishment, and every time you find a consistent punishment method every time, and issue a "not" and "no" command in a severe tone to use a severe tone to order alert.

2. Buy some Dog -specific toys for them to play.

3. Buy some raw cowhide or Dog bones and Dog bite for its grinding teeth.

4. Supplement trace elements and vitamins to improve its "alienity".

5. increase the Dog walking time every day and consume excessive physical strength.

How to deal with cats and bite furniture

1. Fixed time to help repair cat nails

Hygiene

The owner must regularly help the cat to trim nails. Although the cat itself is a clean animal, the cleaning problem is still the first thing to pay attention to.

Reduce destroy furniture

Cat grinding claws is because of the problem of nail shape and itching. To do nail trimming in a fixed time, it can effectively reduce the damage of cats to furniture items, and can also train cats' good habits.

2. Help the cat to prepare things that can be grinded

Prohibit and provide

Since the cat's claws are natural, we just don't want to be damaged by the items, and we don't want to change its nature, then we can provide another block for cats to grind the claws. This is a very important thing and principle.

Ready to grind the pap board

The little master can prepare a piece of grinding panel for love cats, and then educate the cat to reach the position when the cat grinds claws.If necessary, you can use cat mint to guide cats to the area for grinding.

Warm reminder: At present, the grabbing board of cat mint flavors can be purchased on the market, so the little master needs to feel very troublesome.

Material of grinding panel

The material of the claw plate is better with natural hemp ropes or wood, and it must be fixed.Although the above -mentioned cat mint can attract cats, in fact, some materials that are naturally made can also be loved by cats, so it depends on the condition of the cat.

3. Prepare to frightened safety items to scare cats

Afraid of attacking

In fact, cats are quite frightened.When the cat can catch the sofa, the cat uses some safety items to scare it, and the cat will escape because of being frightened.

Reflex condition status

The owner uses a few times to scare the cat, and the cat will know that if you randomly grind the sofa, you will be attacked by the unknown items, and the cat will naturally be far away from the sofa.

Absolute safety item

To scare the items used by cats, you must worry about safety issues. Do not really cause damage to the cat. You only need to remind the warning effect.

4. Spray cats and don't like taste

Categorize and hate taste

Cats hate the taste of lemon, and they don't like the taste of orange peel. Usually, cats will respect as long as they smell these sour tastes.

Spray at the defense

In addition, there are some flavors that are not pleasing to cats, such as: wind oil essence, flower dew water, and other flavor. The owner needs to spray the tastes that these cats hate on the sofa, and the cat will not approach.