[LED mirror front lights] How to pay attention to when using the LED mirror front lamp in the LED Mirror front light

LED lights are becoming more and more popular, so there are already manufacturers to make the LED mirror front lights with a set of mirrors and bathroom cabinets, so installation is relatively simple after buying.However, there are still many mirrors or bathroom cabinets designed separately. Those who want to install the front Lights of the mirror need to be purchased and installed by themselves.

How to choose the LED Mirror front light

1. The light source tile number should be selected.The LED mirror headlights are generally small on 7W, 10W, and 10W applications are more common.The LED mirror front lights are used for a few watts, depending on the size of the bathroom.The general household lighting is calculated according to 0.7w-1W/Square meter.

2. When choosing, look at the size and style of the mirror.If you want to choose integrated Lights, measure the width size of the mirror, and there are some independent Light bulb styles, and the number of choices should be more.

The shape and style of the front lamp are more diverse, and the style has color and monochrome. It is selected and adjusted according to the overall style of the bathroom.

3. There is also the choice of lampshade. The brightness of LED lights is generally relatively high. The lampshade of different processes can strengthen or weaken the strength of the light.Compared to the mirror surface, the frosted LED mirror front lights are not so dazzling, and the light is softer. This depends on personal choices. If you are afraid of darker, you can choose the mirror.

What should I pay attention to when using the LED Mirror front light

LED mirror front lights are different from the structure and glow of ordinary lamps, so the maintenance of LED energy -saving Lights is different from the maintenance of ordinary Lights.

1. It is generally seen that the LED's service life is relatively long, which is also relatively suitable for the suitable use environment.The instant pulse will destroy the fixed connection of the LED, so do not frequently switch when used as a bathroom front light.

2. ELED light should pay attention to moisture-proof. Generally, the LED energy-saving light is required to store the temperature of -40 C -100 C, and the relative humidity is below 85%.After the packaging bag is opened, the relative humidity is below 60%, so the bathroom should maintain good ventilation and cleaning.

3. Any behavior of squeezing resin may damage the metal wire inside the LED energy -saving lamp, so you cannot use the unknown chemical liquid to clean the LED Mirror front light, which may damage the surface of the lamp body resin and even cause collagen cracks.If it is cleaned thoroughly, soak the LED Mirror front light into the alcohol at room temperature and grasp the time within one minute.

The LED Mirror front light is a new fashion decorative in the bathroom space, but the price is tens to hundreds of, which is very different.LED Mirror front light chips are small and fast at decay. Do not fall into the low -cost trap of the merchant.

How to buy Artificial lawn

1, Observe the shape of the grass:

There are many types of grass silk,U type, m Type, diamond -shaped, stems, no stems, and so on.The larger the width of the grass, the more materials are.If the grass is added to the stem, it means that the upright type and the return elasticity is better.Of course, the higher the cost.The price of such lawns is usually more expensive.The turf is consistent, Smooth, and no messy silk, indicating that the grass is elastic and the toughness is good.

2 , Observe the background back:

If the back of the lawn is black and it looks a bit like a custard, it is universal butyor phenyl gum; if it is green, it looks like a leather, it is higher -endSPU Back glue.If the bottom cloth and glue look thick, generally indicate that there are many materials, the quality is relatively good, it looks thin, and the quality is relatively poor.If the back of the back is thin and uniform, the color is consistent, and there is no primary color of the grass, indicating that the quality is better; thin and uneven, colored, and leakage of grass silk primary colors, indicating that the quality is relatively poor.

3 , Touch the grass feel:

Most people have to look at the grasshills when they touch the grass, and they are not comfortable with their feelings.But in fact, the soft and comfortable lawn is the poor lawn.You know, the lawn is used in the daily use of the lawn, and it rarely uses the Skin to contact directly. The hard grass is just powerful, with greater reflection of elasticity and toughness.Broken.It is very easy to make grasshills. It is very difficult to make a straight and high bomb. It really needs high -tech and cost.

4 , To see the anti -pull rate:

The law of the lawn is one of the main technical indicators of the lawn, which can be measured by the method of pupae.Cut a cluster of straw silk with your fingers and pull it out hard. It cannot be pulled out at all. Generally, it is the best; sporadic unplugs, and the quality is okay; if it is not strong, you can pull out more ones.Grass silk, basically poor quality.SPU The adult of the gum -backed gum with 80 % of the power should not be completely unplugged. Generally, the buty phenyl benzene can usually fall off. These are the most visible quality differences between the two gums.

5 , Pressor Shri Test elasticity:

Put the lawn on the table and press it with the palm of the hand. After loosening the palm of the hand, if the grass can be obviously rebounded and restores the original, it means that the grasshopper elasticity and toughness are good.For a few days or longer, then dry in the sun for two days to observe the capability of the lawn to restore the original.

6. Tear back:

Grab the lawn with both hands, tear the bottom back like tearing paper, and it cannot be torn at all, it must be the best; it is difficult to tear and it is better; it is easy to tear, it must not be good.generallySPU With eight percent of adults, the glue is almost not torn; how much the butadhenylene gel can be torn, which is also a difference between the two gums that can be seen obviously.

precautions for the purchase of Artificial lawn

First, raw materials

The raw materials of artificial lawns are mostly polyethylene(PE) , Polypropylene (PP) And nylon (PA) Essence

1 Polyethylene (PE) : The cost is relatively high, the feel is softer, the appearance and sports performance are closer to natural grass. It is widely accepted by users. It is currently the most widely used artificial grass fiber raw material in the market.

2 , Polypropylene (PP) : Grass fiber is harder, simple fibrosis is generally suitable for tennis courts, playgrounds, runways, or decorations, etc., and the abrasion resistance is slightly worse than polyethylene.

3 ,nylon (nylon) : It is the earliest artificial grass fiber raw material and the best Artificial lawn raw material. It belongs to the first generation of artificial grass fiber.Developed countries such as the United States have selected nylon artificial lawns, but the quotation in my country is high, and most customers cannot accept it.

2. The bottom

1 Sulfid wool PP The bottom of the weaving: durable, good anticorrosive performance, good adhesion, easy to be firm in glue and grass lines, the price is PP Woven 3 Times.

2 As well as PP The bottom of the weaving: the performance is average, and the bondage power is weak.At the bottom of the glass (( At the bottom of the grid Cure : Materials such as glass fibers are better helpful for increasing the strength of the bottom and the restraint of grass fiber.

3 As well as PU The bottom: strong anti -aging performance, durable Items Strong adhesion to the grass line, and no smell of environmental protection, but the cost is high, especially imported PU Globes are more expensive.

4 The bottom of the woven type: The bottom of the woven type does not use the bottom lining, and the glue is directly attached to the fiber root. This bottom can simplify the production process and save raw materials.The javelin, etc., but the bottom of the woven type has high requirements for equipment and technology. At present, such products have not yet appeared in China.

Third, glue

1 , Butadienal lactating is the most common material in the Chinese art lawn market. It has good functions, cheap costs, and well -integrated.

2 , Polyuretin (PU) Platin is a world -general material. The strength and bundling force are more than several times that of butyl -butyl, durable, beautiful, not corrosive, moldy and environmentally friendly, but the quotation is more expensive, and its market share in my country is relatively low.

Fourth, product structure identification

1 , Appearance.Bright color, no obvious color difference Items The grass seedlings are flat, the clusters are uniform, the overall is flat, the needle distance is uniformly jumping, and the consistency is good Items The bottom is moderately glued and penetrated into the lining, without leakage and damage.

2 The length of the specifications.In principle, the football field is better and better (( Leisure venue outside Cure The longest grass silk is currently 60mm , It is mainly used for professional football stadiums. The most commonly used in the football field length of the football field is about 30-50mm about.

3 The density of the grass.Evaluate from two perspectives: First, look at the number of grass needles from the back of the lawn. Items Second, look at the line distance from the back of the lawn, that is, the line spacing of the turf. The dense the line distance, the better.

4 , Fiber Fiber's grass fiber and fiber diameter.Common sports grass silk is 5700 As well as 7600 As well as 8800 and 10000 That is to say, the higher the grass fiber fiber, the better the quality of each cluster.The diameter of the fiber is used m Come to calculate, generally 50 150 m between.The larger the diameter of the fiber, the better the diameter, the big diameter is that the grass is thick, wear -resistant, and the small diameter of the fiber seems to be very thin plastic, which is not wear -resistant.The indicators of fibrus are generally difficult to measure, so FIFA generally uses fiber weight indicators.

5 , Fiber quality.The greater the graphic wire with the same unit length, the better.Grass fiber pounds are based on fibrousness, and DTEX Definition as every 10000 The quality of rice fibers is 1 Called by gram 1Dtex EssenceThe larger the grass fiber pounds, the thicker the turf is, the greater the weighing of the grass fiber fiber, the stronger the abrasion ability, and the greater the weighing of grass seedlings fiber, the longer the service life.However, the higher the cost of grass seedlings fiber pounds, the higher the cost, according to the age group of the athletes and the frequency of use, the suitable grass seedlings weigh, it is recommended to choose in large sports venues 11000Dtex The above -mentioned weighing lawn woven lawn.

6 , Other aspects.The Artificial lawn is used to use or to beautify the living environment. Therefore, the most important foot feeling and color quality are the first element of consideration.Whether the trajectory run above meets the requirements of the game.

Fifth, Artificial lawn brand selection

brand is an evaluation and cognition formed by users with strong product quality, good product image, perfect after -sales service, excellent corporate culture, etc.A trust between the establishment and the user.Therefore, when choosing an Artificial lawn brand, you should first understand the history of the brand's development. Whether it has stable product quality assurance, the testing and certification of authoritative institutions at home and abroad, and a complete and professional service system.[top Ten Brands of Artificial Capture & GT; & GT;]

Suitable health foods for hamsters:

1. Bread worm: Formerly known as yellow powder insects, because of the favorite bread, it is also called bread worm.The nutritional value of bread insects is very high. The protein content is 47%, the fat content is 23%, and the carbohydrates are 23%. The nutrients are comprehensive. They are the first of various animals and plants.However, its twisting insect attitude feels more disgusting and makes many people discouraged, but the hamsters really love to eat bread worms.

2. Dried bread worm: It is the noodles that are air -dried, and their nutritional value is still very high, but the deterioration facial drying during the air -drying process can cause the risk of hamsters to get sick.There are also rats on the Internet that the method of high -temperature heating and disinfection in the microwave oven to avoid this risk is really worth trying.After all, holding the dead face is easier to accept it than holding the alive face, but also remind you that if you eat more hamsters, the urine will stink.

3. Boiled protein: Boil the eggs with water, without any flavoring agent, wait for the eggs to eat the protein part of the hamster.Personally, I feel a bit wasteful, because a hamster can't eat much, and the cooked eggs can't save much time. It can only be said that it is more suitable for the rats with more rats at home.

4. Milk slices: The white, round -like coins are sold on the market.I have tasted it, and I feel that pure Milk powder melts and does it. It is very sweet.When the hamster was eating, it felt like to use the tooth to pour Milk powder on the surface of the milk tablet.Personally, I think that when I use Milk powder, put into the oven into a small milk block to replace the milk slices on the market.

5. Cheese: Generally, you can buy it in the supermarket, but it is recommended that you only buy the original pieces to eat it for hamsters. I have tasted it. It is very salty. It is not recommended to eat new babies, which may cause dehydration to death.Every time the hamster eats a lot, the rest must be put back to the refrigerator in time.

6, egg white: Generally, I will take the remaining eggshells after cooking.Take away the eggshell, and the tip of the eggshell when moving at high speed is still scratching.

7. Small fish dried: This refers to the dried fish dried in the market on the market. It is also super salty. It is strongly not recommended to eat newborn babies.Adult hamsters are not particularly loved, and there are not many feeding between rats.

1. Why do Dogs do not like to wear Raincoats

I have all experienced the raincoat, and the Dog's face was resentful when I put on the raincoat for the first time.In fact, there are reasons.

Dogs are born with things that are pressed on the back, and being pressed back to the Dog is a threat to rule (this is why the male Dogs ride each other, but also to establish their status.

If the number of the raincoat is small and pressing the Dog's back and chest, it will think that there is something to try to "rule" itself, as if it is riding by other Dogs, it will be nervous.

The solution is to buy the appropriate size raincoat to ensure that the raincoat will not stretch the Dog, making the Dog feel restrained.Before buying, you must accurately measure the size of each key part of the Dog, and then buy the size table given by the raincoat manufacturer to buy.

If the manufacturer does not give the size watch, it is recommended not to buy it. One shows that this manufacturer is not professional enough. The size of the clothes is not suitable for Dogs. As a result, you have to return and exchange goods back and forth.

2. Can a Dog not wear a raincoat?

Indeed, whether it is a Dog or a close -up wolf, they do not need a raincoat.But as a pet Dog in urban family, Raincoats are indispensable.

1. Keep warm need

For puppies, short -haired Dogs (Weima Dogs, Lingti Dogs), hairless Dogs (crown Dogs) and elderly Dogs, low -temperature and wet hair on rainy days may cause Dogs to catch a cold, let alone Outdoor Outdoor Outdoor outdoorDeep landscapes when climbing the mountain.It can keep warm when wearing a raincoat.

The wet hair will not only make the Dog feel cold, but even worse, if it does not blow dry in time, the water vapor will form a humid and sullen environment with the hot air that is condensed between the hair and the heat emitted by the body, becoming a hotbed for bacteria and parasites.Dogs are likely to have Skin diseases.

2. Keep your hair clean

Unless your family has a separate Dog room, you must not want to sleep with a pile of mud balls.Walking the Dog on a rainy day, the Dog's four legs will almost stick to mud. It is also difficult to be spared due to the mud splashes splashed on the abdomen.The bathroom was bathing.

Third, the types and advantages and disadvantages of Dog Raincoats

At present, there are three common Dog Raincoats on the market. There are three types: cloak type, one -footed four -legged and split four -legged type. Each style has its own advantages and disadvantages.

1. Cloak

The advantage of the cloak raincoat is that it is very convenient to wear and take off. The easiest thing is that the cloak is enough. It is enough to put it in. Some cloak Raincoats will increase the abdomen tie to increase the fixing.

However, the disadvantages of this Dog's rain poncho are also obvious. There are no wrapped in the abdomen and four legs. It can only ensure that the back is not wet. When the wind and rain are in the wind and rain, the cloak will be lifted, resulting in the affected chest.

The cloak -type raincoat is more suitable for short -haired Dogs (can be wiped back anyway). In addition, you can choose when you need to bind the Dog's body as little as possible.

2. Conjunction

The advantage is that the most wrapped, only the necessary parts and four feet will be revealed. If you cooperate with waterproof rains, you can basically go out and take off your body without rubbing. It is a Tool to save time.

But the disadvantages are also obvious, because the length cannot be adjusted, you will buy bigger or small if you are not careful, causing the Dog to wear it or not to put on the legs.EssenceOn the one hand when choosing, we must carefully measure the Dog's body, and on the other hand, choose the brand with as many as possible.

The conjoined four -legged raincoat is suitable for various types of Dog breeds, especially suitable for long hair, but it may be difficult to buy if the Dog is super long or super fat.

3. Skin four -legged style

The split four -legged type can be well wrapped in the abdomen and four legs. At the same time, the design of the split body can better adapt to the Dogs of the non -standard body type.It is much more convenient than a conjoined.

The disadvantage is that there are not many well -known brands for split -type Raincoats. In terms of fabrics and breathability, it may not be as effective as using a large -name raincoat with professional and breathable fabrics.

The four -legged four -legged type is suitable for all kinds of body and hair types. If the pants are troublesome, you can only wear the front part, and the front chest and abdomen will not be mud.

4. What are the aspects of the style?

1. Locking, buckle or magic stickers

When buying Raincoats, pay attention to the way to see the way.The method of the buckle and the way to pull the lock are relatively strong, and the magic stickers are easy to lose stickiness because of the card hair for a long time.The only bad way to buckle is that there may be gaps between the cloth surface and the cloth surface, not completely waterproof.The waterproofing method of pulling is the best, but you must choose to work well by the car. When you pull it, you will not get stuck to the Dog's quilt.

2. Fabric waterproof and durable

Many Raincoats are single -layer PVC fabrics. Although waterproof, the water still penetrates into it. As a result, a layer of water is stuffed inside the raincoat, which is more likely to cause Dogs to get Skin diseases.

3. breathability

Choosing a raincoat must not only look at it. For example, many Raincoats of many transparent people and Dogs before they look very Japanese and fresh, but in fact, because of the hard plastic, the breathability is very poor. The heat of the Dog's body cannot be timely.Excessary body, mixed with the moisture in the air in the raincoat.

Many Outdoor pet supplies brands of jackets and Raincoats use the breathable fabrics of human users' external jackets, which can keep the outer waterproof and the hair is completely dry.

4. Slip treatment

Finally, pay attention to how to deal with the seams of the raincoat.There will be a gap between the cloth surface and the needle thread, which is still difficult to avoid the penetration of water vapor.Some big brands of Raincoats are treated with three -dimensional edge, which avoids rainwater and water vapor from penetrating into the interior of the raincoat.

1. Toon seed soaking

Before soaking, put the toon seeds into the cloth bag and gently rub it, and then fan the film's membrane wings.In order to prevent the seeds with bacteria, the seeds are cope with disinfection treatment before germination. There are two disinfection methods, namely, hot water, sterilization and potassium permanganate solution.

Hot water disinfection method: Put the seeds into the bag, first immerse in warm water at 45-48 C for 10 minutes, and then cast it with 55 C hot water for 15 minutes. Immediately take it out and soak it in cold water for 6 to 8 hours.

disinfection method of potassium permanganate solution: First soak the seeds with 0.1%potassium permanganate solution for 30 minutes, then rinse it with water, and soak them with cold water for 6 to 8 hours.

During the above disinfection processing process, 3,000 times love to collect more solutions, which can not only increase the height of the toon sprouts, increase the plant weight, increase the yield, but also make the sprouts harvest 1 to 2 days in advance.

2. How to grow toon seeds

(1) seedlings

1. Choose high -quality seeds

Choose the new seeds of the year, the seeds should be full, the color is fresh, red and yellow, the seed is yellow and white, the clarity is more than 98%, and the germination rate is above 40%.

2. Insulation

In order to make seedlings neatly, germination is required.The method of germination is: use warm water at 40 C, soak for about 5 minutes, constantly stir, and then soak in water at 20 C to 30 C for 24 hours.On the clean reed, the stall is 3 cm thick, then covered with clean cloth, and placed in the environment of 20 C to 25 C to moisturize germination.During the germination, the seeds are rolled 1 or 2 times a day, and washed with water at about 25 C for 2 to 3 times to control the excess water.When 30%of seeds are sprouting, sowing can be sowed.

3. Sowing in time

The land selection is flat, the light is sufficient, and the sandy soil and the fertile fields with good drainage and the fertile soil are used for seedling land, combined with the fertilization of the whole land, sprinkled well, and rolled.At the 1 -meter wide puppet, press the trench at 30 cm lines, the width of the ditch is 5-6 cm, and the trench depth is 5 cm.

4. Seedlings management

Seedlings emerged about 7 days after sowing, and watering was strictly controlled before the seedlings, in order to prevent the seedlings from affecting the seedlings.When the small seedlings are unearthed, 4 to 6 real leaves should be performed, and the seedlings should be carried out and fixed seedlings should be carried out.Water before setting the seedlings, set the seedlings at 20 cm spacing.When the plant height is about 50 cm, the seedlings are dwarfed.Use 15%polyzole 200-400 times solution, spray once every 10 to 15 days, and spray 2 to 3 times in a row to control the length, promote dwarfing seedlings, and increase material accumulation.Bonding the tingling while performing polyzole treatment can increase the number of branches.

(2) Management after planting

1. Fertilizes on the ground

The sunlight greenhouse cultivation must be applied to the bottom Fertilizer.The high -quality farmhouse Fertilizer per mu is not less than 5,000 kilograms, less than 100 kg of calcium phosphate, and 25 kg of Urea, and sprinkle deeply.Then plant seedlings, generally 80 to 100 cm width.

2. Plant density

The planting density is about 30,000 plants per acre, and the plant spacing is 15 cm and the line spacing is 15 cm.

3. Fine management

Temperature management: It can not be warm in a few days, so that the temperature is kept at 1 C to 5 C to slow down the seedlings.After 8-10 days of planting, cover the grasshopper on the greenhouse, unveiled during the day, and cover it at night.The temperature in the shed is controlled at 18 C to 24 C during the day, and 12 C to 14 C in the evening.Toon buds can be grown through 40 to 50 days under this condition.

Hormone regulation: After planting the seedlings, use Zhizhi Treasure to treat the upper part of the toon seedlings 4 to 5 dormant buds to place the medicine with pumping treasures, and 1 gram of medicine is applied 100 to 120 buds.The bud is strong, and the output can increase by 10%to 20%.

Humidity adjustment: The toon seedlings that are first planted to the greenhouse should maintain a higher humidity.After planting, pour water, and then water the water as depending on the situation. The relative humidity of the air should be kept at about 85%.During the growth period, the relative humidity is about 70%.

Light adjustment: The production of sunlight tonon toon, good light to promote growth.Use non -drop -free film and keep the shed film clean.

4. Tsubaka Gun harvest

Toon buds under the right temperature (18 C to 24 C during the day, 12 to 14 at night), grow fast, purple -red, strong flavor.40-50 days after the greenhouse is covered with grasshoppers, when the toon buds grow to 15-20 cm, and it starts to harvest when it is good.In the first stubble, the top buds should be taken on the top buds on the buds. When picking, a little buds should be leaving the top buds to let the left bud bases continue to conidize leaves.The harvest should be carried out in the morning and evening.The toon sprouts in the greenhouse can be collected once every 7 to 10 days, and a total of 4 to 5 times is collected.