1. What are the composition of the ghost lamp?

HID pillar lamps are generally composed of lamp head (pyrine bulb), electronic rectifier (also known as stagger, stabilizer, fire cow, etc.), line group control box, etc.

1. Lantern head

There is no filament at the HID blealing lamp head. The current uses a current between the electrodes to promote the brightness of the pyrum molecules to generate brightness. There is no problem of tungsten filament burning (none of the tungsten wires can be called a pyrine lamp).

2. Electronic rectifier

After using the DC voltage of the battery 12V, after a series of conversion, control, protection, voltage voltage, frequency conversion and other actions, it generates an instant 23000V ignition high voltage to ignite the lamp head.There are about 4A working current.

3, line group

Generally made of flame retardant materials. By increasing the cross -sectional area of the power cord, the current passing capacity is improved to ensure the normal work of the HID pyrine lamp. Some H4 models of the airlight lamp with the relay line group for work control.

2. How to install the ghost lamp

First of all, take off the front lamp before, and then find the same type of hernia bulb as it.And before installation, install a stable, which is conducive to the stable operation of hernia lamps.Then lead the light line in the car out of the dust cover. Because most of the cars have gaps, the sealing work needs to be done after the leading line, so that the hernia bulbs are installed.

In fact, the installation of hernia lamps is simple and the operation is not complicated.However, in order to drive in the future, it is recommended that you find professional personnel for installation.

Cat's daily care method

1. Pruning nails

1. First put the cat on your knees and hold it from behind.Gently squeeze the toenails and the feet behind, and the toenails will extend.

2. Cut off the toenails above the blood line with sharp toenail scissors. Do not cut it to the sensitive meat under the bloodline or the claws.

3. Do not forget to cut the "thumb". The thumb is on the inside of the front leg. Some cats have 6 or 7 toes on their feet.

4. Do not cut the cat's beard casually, because the beard is the cat's radar, and the beard cat has no sense of direction and loses the ability to live.

5. Cut the toenails are fast. If the cat is irritable in the trimming process, wait until the cat is quiet before continuing to cut.

2. clean ear

1. Check the ears and see if there are signs of inflammation and abnormal symptoms.The ears have symptoms of odor or pus inflammation, go to the Hospital for examination, and timely detect the disease in time.

2. Prepare ear washing and cotton swab.Remember to use tap water to wash your ears with tap water here, which will cause ears.Squeeze the ear canal into the ear canal and wet the auricle, and gently rub the cat's ears, so that the ear fluid and dirt are fully exposed.Then let the cat throw your ears, throw out the dirt in the ear canal, and wipe it with a cotton swab to make the ear canal dry and clean.Cats who often return to ear disease can use some ototics to care.

3. clean your eyes

1. A healthy cat does not need to care about the cat's eyes.Cats will clean themselves.If you find that there are secretions, use a cotton swab to wet the eye drops and wipe it clean.Can't be the same cotton swab, the two eyes are common.And don't wipe the cat's eyeballs, be careful.

2. For cats with long hair, the hair around the eyes has dirt, and wipe it with eye drops.

Fourth, clean the mouth

1. Cats have been trained to brush their teeth since childhood. Generally, they can be wrapped on their fingers, or cotton swabs, possess a faint saline, wipe their teeth and gums, and let the cat adapt to brushing.But note that when the cat is very fierce, don't try to get it, it will hurt you.

2. After the cat adapts to brushing, there must be a dedicated toothbrush and toothpaste to brush your teeth regularly.The brushing time should not be too long, and the strength should be light.

3. Frequent some dry foods, drinking water after meals can play a role in preventing tartar and gums.

Choose fire Dragon Fruit Seedlings Selecting Care for fire Dragon Fruit Seedlings planting technology

1. Dragon Fruit seedlings do not buy seedlings with different production and planting environment

Production environment -temperature, climate, rain, soil, etc. The closer these natural conditions, the less likely you fail, the greater the successful grasp, especially the temperature, which is especially important.

2. Dragon Fruit seedlings do not buy seedlings without their own planting bases or small suppliers with small bases

These suppliers are often selling red -hearted Dragon Fruit seedlings that they breed. The owner is a little bit of the West family.

3. Dragon Fruit seedlings do not buy seedlings that are not pure

The red -hearted Dragon Fruit seedlings sold on the market are mixed with flowers. Among them

4. Dragon Fruit seedlings do not buy sick seedlings weak seedlings

seed red -hearted Dragon Fruit seedlings from different regions, often brought in some local diseases that were not available in the local area, especially tropical fruit seedlings, and they would bring some local germs in the local area because there were no such diseases in the local area.Cause major losses.

The three main points for buying fire Dragon Fruit seedlings are:

1. Look at more

When buying Dragon Fruit seedlings, we must first go to the supplier's seedling base.To ensure the success of the franchisee.It also depends on the management level and business model of suppliers, and then depends on the variety and quality of his red -hearted Dragon Fruit. These factors are key factor that determines the success of the franchisee.

2. Ask more

Understanding the evaluation of the red -hearted Dragon Fruit produced by the suppliers and consumers is the most authentic and most important. The quality determines the market, the quality determines the price, and the quality determines the benefits.Only good quality can be invincible in market competition, bringing you greater economic benefits.

Third, eat more

Before buying fruit seedlings, taste the red -hearted Dragon Fruit produced by the supplier themselves as much as possible, so that there is a bottom in mind.Otherwise, wait for the hard work for two years.Well, wise

fire Dragon Fruit Seedling planting technology

1. fire Dragon Fruit seed seedlings planting environment

Dragon Fruit belongs to tropical and subtropical plants. It is drought -resistant and high -temperature. It has low requirements for soil quality. It can be planted in flat land, hillside, and sand.The temperature is lower than8The areas of C are generally not suitable for planting.

2. fire Dragon Fruit seed seedlings planting method

There are many ways to plant Dragon Fruit. It can be planted by climbing walls or sheds. It is most commonly cultivated in column. Its production cost is low and the land utilization rate is high.The so -called column cultivation is a cement pillar or wooden pile on the ground tree, and planted around the column.3 ~ 4The plant Dragon Fruit grows up along the pillars.

3. fire Dragon Fruit seedlings planting season and planting specifications

fire Dragon Fruit can be planted all year round. Because its root system likes the breathable environment, it should not be too deep when planting. Generally3About centimeters.The soil should be kept wet in the early stage of planting to help its growth.Established per acre110Bar column (column spacing2.5Mi), planting around each pillar4Plant, acres400Many plants can greatly improve land utilization.

Fourth, Dragon Fruit planting field management

1..Fertilizer should be used for diligence: Due to the long harvesting period of the Dragon Fruit, Organic fertilizer should be applied, and the application of nitrogen, phosphorus, potassium Compound fertilizer should be balanced.Potassium and magnesium Fertilizer should be appropriately applied during the flowering results to promote the accumulation of fruit sugar and improve the degree of sugar and quality.

2..Time -top -up: When the branches grow to1.3 ~ 1.4Migao should be tied in time to promote branches and let the branches droop naturally, which is conducive to the accumulation of nutrients and blooming results in early flowers.

3..building branches in time: After the fruit harvest is harvested every year, the branches of the conclusions must be cut in time to make them re -grow new branches to ensure the fruit production in the coming year.

4..Diseases and insect pests: Dragon Fruit is basically not subject to insect pests, but the seedlings are easily harmed by snails and ants, and pesticides can be used.Dragon Fruit planting high -temperature and high humidity seasons are susceptible to diseases, and some branches of necrosis and mildew occur, and sterilization agents can receive good results.

1. What types of Shading nets

1. Round silk Shading net

Because the Shading net is woven by the meridians and weft lines, it is mainly woven by the editorial machine. Therefore, if the meridians and weft lines are woven by round silk, it is the silk Shading net.

2. Flat silk Shading net

Both the meridian and weft lines are flat -filaments woven.

3. Round flat silk Shading net

The meridian is flat wire, the weft line is round wire, or the meridian is round wire, the weft line is a flat wire.

2. How to choose a Shading net

1. color

The commonly used Shading nets include black, silver -gray, blue, yellow, green and other types. Black and silver -gray are used most commonly in vegetable coverage.The lighting and cooling effect of the black Shading net is better than the silver gray shade net. It is generally used for crops with low temperature and high temperature seasons and low requirements for light and light viral diseases.Capelles and other green leafy vegetables such as coriander and spinach.The silver -gray Shading net has good light transmission and has a aphido effect. It is generally used in the early summer, early autumn and the requirements of high -oriented virus diseases, such as radishes, tomatoes, Pepper and other vegetables.It is used for winter and spring anti -frozen coverage. Black and silver -gray Shading nets are available, but the silver -gray Shading net is better than the black sunshade net.

2, Shading rate

During the weaving, the shade net can regulate the density of the weft, so that the shielding rate can reach 25%to 75%, or even 85%to 90%.You can choose in different needs in the cover cultivation.Xiaqiu covers cultivation, and the requirements for light are not too high. The small cabbage and other green leafy vegetables with high temperature can be selected from the Shading net with a high shielding rate.

For fruit and vegetables with high light requirements and high temperature resistance, you can choose a sunny net with a lower lighting rate.winter -spring anti -frost and anti -cream covers is effective with a sunshade net with a high shielding rate.In general production applications, the Shading rate is generally selected from 65%to 75%of sunshade nets.When using it, it should be adjusted according to different seasons and weather conditions, by changing the time to cover and adopting different cover methods to meet the growth needs of different crops.

3. Width

The range of general products is 0.9 meters to 2.5 meters, and the widest is 4.3 meters. Some manufacturers can also be customized as needed.The use of 1.6 meters and 2.2 meters is currently more common.In the coverage cultivation, multiple stitching is used to form a large area of coverage. It is convenient to unveil the cover during use, easy to manage, save labor, save effort, and facilitate fixation. It is not easy to be scratched by strong winds.It can be stitched according to the length and width of the coverage area.When cutting the Shading net, the cutting iron should be scalded with electric iron.When stitching, the cotton wire cannot be used, and the nylon wire should be sutured to increase the stitching firmness.

[bathroom standing rack] How to buy the bathroom shelf

What material is good in the bathroom shelf?

1. glass setting rack

Features: It is generally made of tempered glass. It is stylish and easy to clean, but it is necessary to avoid strong collisions.

Cost -effective: high

2. Plastic shelf

Features: It has the characteristics of resistance to corrosion, anti -aging, rustless, non -toxic, odorlessness, high pressure resistance, light weight, and simple construction.

Matching: Usually, it is mainly practical, and the appearance is usually poor.

Cost -effective: low

3. Stainless steel shelf

Features: no corrosion, erosion, rust or wear.Because stainless steel has good corrosion resistance, it can keep the structural components permanently maintain the integrity of engineering design.

Matching: Generally, you choose a wall -hung shelf, which can make good use of space and increase the metal sense of the kitchen

Cost -effective: medium

4. Alloy setting rack

Features: Metal characteristics composed of two or more metals or non -metals.

Matching: With the same color cabinets, it will have better decorative effects.

Cost -effective: medium and high

5. The barrier shelf

Features: The rack combined by the PPR pipe can be freely matched with combinations, hollowed out in the middle, putting on the partition, the color of the partition is green, orange, blue, black and other choices, beautiful and fashionable.

Matching: The appearance is very beautiful, and the assembly is very simple. DIY is autonomous.

Cost -effective: medium and high

How to buy a bathroom shelf

1. Whether the base of the rack is firm and whether the pull -down is easy to shake.

2. The bathroom is a place that is often dealing with water. The environment is relatively humid. It is necessary to consider whether the material of the rack can not be rotten in a humid environment without deformation and not rust.The shelf in the bathroom is in a humid environment for a long time, so it is necessary to choose materials that are not vulnerable to rust and rust.Consider stainless steel and alloy sets.

3. Whether the gravity of the placement is good, will the hung heavy object deform?The most fundamental capacity of the rack is its heavy ability. Buyers need to buy according to their actual weight.

4. Pay attention to the supporting facilities. It is necessary to support the style of the three -piece sanitary ware set (bathtub, toilet, and basin) to ensure the unity of the entire bathroom style.

How to clean the shelf

(1) Wipe the rack with water and dry it with a soft cotton cloth. Do not use any grinding cleaner, cloth or paper towels, and any acidic cleaning agent, glittering abrasive or cleaning agent or soap, wipe the shelf, etc.surface.

(2) Because the long -term residues of chromium -plated surfaces such as various washing and shower gels that are usually used will degenerate the surface of the shelf and directly affect the surface quality.Please clean the surface of the rack once at least once a week, and it is best to use a neutral cleaner.

(3) For the difficulty of removing dirt, surface dirt film and stains, please use mild liquid cleaner, colorless glass cleaning solution or polish liquid without wear, and then clean the rack with water.And dry with soft cotton cloth.

(4) You can use cotton wet cloth with toothpaste and soap, wipe it gently, and then wash it with water.

(5) You can use wax oil with strong decontamination capacity and apply it on a clean white cotton cloth to completely clean the entire product. The cycle is generally 3 months, which can extend the life of the rack.Remember that every time you clean, you must dry the water stains, otherwise water stain dirt may appear on the surface of the pendant.