1. How to raise different types of potted plants in winter

winter is not only a critical period for many plants, but also a harsh period full of danger and challenges. Then, in winter, how can our flower plants be done to ensure safely, peacefully, and coldWhat about winter?

1. Succulent plants

The two main things that are succulents want to safely overwinter are thermal insulation and reducing watering.Most of the Succulent plants are hot, facing low temperaturewinterMany varieties of succulent growth will slow down and even enter the dormant stage.Therefore, in winter, you should pay attention to daily heat preservation of succulents and allow the Succulent plants to receive light in time. We all know that the meaty leaves of Succulent plants contain a lot of water.It is easy to suffer from freezing damage because of its fleshy blades.Therefore, in winter, you must do a good job of heat preservation.

The growth of winter was originally slow. At this time, some succulent entered the dormant, and the physiological activities almost stopped. Naturally, watering should be reduced to prevent damage.manyAt the root of the meat, in some areas in the north, when the indoor temperature is high, it needs ventilation, but don't let itmanyThe meat is close to the window to prevent freezing!

2. Observation plant

Observation of leaf plants mainly pay attention to maintaining room temperature to ensure the indoor temperature, which is higher than the minimum temperature of plant growth. For friends who do not have heating at home in the south, you can build a small shed for flowers and light it on time.In the area, there is no need to worry about this problem with heating. Your winter room temperature is completely fine!But pay attention to the problems of ventilation and watering, don't let the plants lose to other factors.

3. watch fruit plant

fruit plants are relatively special. If the fruit watching plants have ended fruit, you need to pay special attention at this time. Do not fertilize it, otherwise it is likely to cause the fruit drop. Compared with other plants, it will gradually reduce pouring in winter.Water volume, fruit watching plants is not. The growth of fruits requires a lot of water. If the water is not replenished in time in winter, it is likely to cause the fruit to dry. In this case, it will lose good ornamental.It needs to be done, but watering cannot be ignored!

2. Potted plants overdue winter skills

In fact, in winter, flowers and plants that need to be done in general, you can use such a paragraph to summarize: less watering, applying less Fertilizer, sunlight, and preventing diseases!Keep more ventilation at room temperature, be careful of plants and don't catch a cold!

1. Watering

In winter, the temperature is getting lower and lower. The lower the temperature at this time, the more restrained the watering.winter watering is generally selected at noon with sunlight.If the room temperature is always maintained above 15 degrees, it can be maintained normally.For flowers in hibernation and semi -hibernation, don't be wet.Do not pour too cold water when watering. The water temperature is consistent with the temperature of the room temperature.

2. Light

If there is too much dust on the flower blades, scrub it with water in time.This is conducive to plants for photosynthesis and promote the healthy growth of plants.

3. Temperature

Each flower has its own limits of low temperature resistance and needs to be prepared.

For flowers with low temperature, cold temperature (5-12 C, below 5 C), such as pomegranate, rose, plums, osmanthus flowers, palms, stalks, bells and Lagerstroemia, etc., you can place Outdoor courtyard or balcony to the sun.

For flowers that need to maintain medium temperature (12-20 C), such as white orchids, camellia, azaleas, Xiaoxiao, Clivia, Golden Bell, and Begonia Four Seasons Begonia, they must move to the room before the temperature drops to 10 C.

For flowers that can grow normally under high temperature (18-30 C), such as: Milan, Fusheng, Jasmine, Leaf Wood, Divo, Blossom, Calleus, Clamps, Fairy Balls and aloe, etc.Move it to the room, put the Flower pot with plastic Bags before the temperature drops to 5 C, and tighten the plastic bag to leave a small amount of stomach on the bag to facilitate ventilation.Around the sunny noon, moved to the room for a few hours and moved back to the room for a few hours.

4. Frozen

If the flowers and plants are frozen, don't immediately transfer to a high temperature place, you should gradually relieve the frozen.In addition to some potted plants, pay attention to protection, like some small seedlings also need to pay more attention to them in winter to provide them with a good growth environment.

5. Prevention and treatment of pests and insect pests

flowers and trees that are prone to pests such as begonia, roses, and mountain tea, etc., collecting the dead branches under the plant to collect and burn the leaves, which can reduce the occurrence of disease next year.

1. What types of hooks

The adsorption method can be divided into:No trace hook, suction cup hook, ordering hook, sticky glue hook, etc.

1. No trace hook: A kind of environmentally friendly hook that does not produce traces in the veneer and does not damage the veneer.

2, suction cup linked: use the suction cup to tightly adsorb the hook on the wall.

3. Ordering hook: With nails, add nails into the hook of the wall.

4. Adhesive hook: Traditional hooks, adsorb the wall with sticky glue.

According to the material, it can be divided into:Wood hooks, plastic hooks, iron hooks, etc.

1. Wooden hook: The linked material is mainly wood.

2. Plastic hook: The hook material is mainly plastic.

3. iron hook: The linked material is mainly metal.

two,How to choose a hook

1. Select the material

The linked material directly affects its support.The decorative hooks generally have four commonly used materials for wood, plastic, iron and resin. The titer linked support is the highest, but it is easy to rust; several other materials are relatively low, each with its own characteristics, you can have your own characteristics.According to the actual use of the material, the material is selected.

2. Choose adhesive method

Decorative hooks can be divided into non -trace hooks, suction cup hooks, order -linked hooks, adhesive hooks, etc. The hook of no trace and suction cups will not leave traces on the adhesive surface, but it is not stable enough;The sticky glue hook is relatively stable, but it will leave traces on the adhesive surface.Buyers can choose the right link according to actual needs.

3. Check before buying

When buying, check the hook. First, check whether the linked is complete, no cracks, and damage; the second is to test whether the hook is firm, like suction cups and no trace hooks. You can hang up and try the effect first.

1. The advantages and disadvantages of ceramic Flower pots

The ceramic Flower pot is more decorative, it looks more exquisite, and there are various sizes and forms. Therefore, they are often used to match with plants and complement each other.However, ceramic Flower pots are heavy, it is not convenient to move, it is not easy to operate when changing the pot, and it is fragile.The ceramic Flower pot comes with glaze. The breathability and permeability are very poor, and even worse than a plastic Flower pot. It can only be drained and breathable through the water permeability hole at the bottom.It is prone to stuffy and rotten roots.If your home also uses a ceramic Flower pot, you can make a drain and breathable drain layer at the bottom, such as putting some pottery grains to increase the water permeability of the soil.You can also set up pots, which is to put the ceramic basin outside the plastic basin. This will neither affect the beauty nor the effective breathing of the plant.

2. What flower is suitable for ceramic Flower pots

The soil in the ceramic pot will be slower, and it is more suitable for flowers and plants that prefer the often wet soil.Ceramic pots are suitable for flowers such as gardenia, Milan, Huwei, dwarf viewing bamboo, copper coins, mint and other flowers. Because these flowers are suitable for growing in a moist environment, these flowers with ceramic pots can promote them.Better growth.Ceramic Flower pots are also suitable for planting plants such as safe trees, rubber trees, and fortune trees, which can make them grow more.

The characteristics of ceramic Flower pots are good thermal stability, good abrasion resistance, high mechanical strength, good corrosion resistance, environmental protection, non -polluting, rich raw materials, low price, good water retention, can provide flowers for a long time to provide a flower with a one -time flowers with a flower with a flower with a flower with a long time.A wet growing environment.

1. What is caused by the Inflatable sofa leakage

The Inflatable sofa is a light and easy -to -carry sofa that can provide comfortable seats when outdoor activities, Camping, travel or temporary use.Woolen cloth?

1. During the use of inflatable sofas, it encounters damage such as wear, friction or puncture, leading to air leakage.

2. After the Inflatable sofa is charged, the mouth is not sealed, causing the gas to leak out from the seal.

3. Due to the problems of material, craftsmanship and other aspects of Inflatable sofa, there is a poor air tightness in itself, and there will be a certain amount of air leakage.

2. How to make up the Inflatable sofa leak

If the Inflatable sofa leaks, it should be repaired in time. So how to repair the Inflatable sofa leakage?

1. Find the leakage point

First, you need to find the air leakage point of the Inflatable sofa.You can gently press or listen on the Inflatable sofa with your hands to find the sound of gas leakage.You can also distribute the inflatable sand into the water to observe whether there are bubbles come out to determine the leakage point.

2. Replenish illegal point

After finding the illegal point, you can use a special Inflatable sofa repair set to repair glue for repair.First apply the maintenance glue evenly around the air leakage point, and then wait for the film to make the glue dry.Make sure that after the glue is fully bonded, the inflatable test is leaked again.

If you cannot repair the problem of the illegal leakage, you can try to use Inflatable sofa repair subsidies.Cut the repair subsidy into a proper shape, cover it on the air leakage point, press hard pressing it to close the surface, and then wait for the moment to bond it.Pay attention to choose high -quality repair subsidies to ensure long -term effects.

3. How to prevent Inflatable sofa leakage

1. In order to reduce the possibility of Inflatable sofa leakage, avoid direct contact with the Inflatable sofa when used in normal use.Laying carpets around the Inflatable sofa, anti -sliding pads, or placing it on the soft ground to reduce the impact of external forces on the Inflatable sofa.

2. Keep the dry sofa dry, clean and insect -proof, avoid placing in high temperature environments.

3. Buy good quality inflatable sofas.

How to make delicious baked tips when grilling

1. Baking process

1. Live fire: First clean the baking oven, add charcoal (millet charcoal) to lit, put the charcoal full burn, and then spread the charcoal fire with fire tongs into a fire layer with a thickness of 1.5-2 cm.

2. Bake: Put the food on the furnace surface. All the direct brushing oil (brushed on both sides) of the meat and pork ribs is baked, and then grilled over and over.The skewers look rolling in oil, white and yellowish colors indicate that they are mature.Mature.The length of the baking time should be dependent on the size of the heat and the skewers, but must not be burnt.Swipe the oil while baking, and sprinkle spicy powder, cumin horn or powder when the food is baked until nine mature.Brush on the oil and bake it with a little.

3. The vegetables should be placed on the furnace surface, then the vegetable powder is added, brushed and brushed it with oil, and rolled over and overflowed with a soft roasted yellow roasted yellow.Oil can be grilled for a few seconds to eat.

Note: 1. Use vegetable oil and color oil, disable sesame oil, lard, etc.

4.After the brush is covered with oil, you should wipe off the excess oil on the oil tank, and the brush should not be fell into the fire on the skewers.

Attachment: The modulation of the fragrance sauce

1.ingredients: 500 grams of pickled Pepper, 150 grams of sesame sauce, 200 grams of Peanut butter, 40 grams of Pepper oil, 100 grams of garlic, 30 grams of Pepper powder, 80 grams of monosodium glutamate, 1 packet of special freshness, 100 grams of chicken essence, white sugar, refined salt salt, refined salt salt40 grams.

2.First chop the pickled Pepper, peel and smash the garlic cloves.

3.Put a porcelain with sesame sauce, Peanut butter, garlic fine foam, peppercorns, special fresh, chicken essence, sugar, refined salt, etc.

4.Boil it with vegetable oil until eight mature and add the fine foam frying, then pour it into the porcelain tuned material and cover the lid, let the cooling before taste it. If you are salty, put some white sugar MSG, fade a little salt, and then add some salt.It becomes a fragrant sauce.

Second, grilling method mastery

1. barbecue slices: Thin meat slices can be cooked in about 3 minutes. It should not be grilled for too long. Otherwise, the meat is hard or burnt, it will not be delicious.Pork must be cooked until it can be eaten. The beef should not be roasted until it is cooked, otherwise it will destroy the tenderness of the meat.

2. seafood food and fish: Clads and fish fillets are best wrapped in Tin foil when barbecue, so it is not easy to bake the fish Skin, and it is easy to store delicious soup.For about 2 to 3 minutes, the fish fillets are raised and can be eaten.

3. Sweet and hot, hot Dogs, sausages, etc.: Try to use low heat. In addition to vegetables, it is best to put it in a Tin foil box. Bake in a stuffy way.

charcoal

The best choice for fuel is charcoal, try not to use chemical charcoal.The special flavor of charcoal -grilled food comes from the fragrance of barbecue food at high temperatures of charcoal. Therefore, choosing charcoal is the basis for enjoying deliciousness.Good quality charcoal is generally burning for a long time, and the fire is good.It is best to choose the branches of charcoal. Do not use the whole stem, otherwise it is not easy to order.During the ignition, 5 capsules are put in a pack of 5 pieces of fire.When the charcoal is burned to the transparent red heat, it is flattened to bake. When the surface of the charcoal has not been burned, do not rush to bake it.

clean grill

Before grilled food, brush the grill on a layer of oil to avoid the food sticking to the rack.Brush the residue on the grill with iron at any time to keep the grill cleaning, so that it will not affect the flavor of the food.

Turn over time

As soon as the food is grilled, it will not only extend the time to bake, but also destroy the protein and cause the meat to harden.When turning the food, the food must be heated to a certain degree to easily turn over.If it turns on, some foods stick to the grid, indicating that the protein has not been completely heated, and the durler will only tear the protein fiber. If it is fish, it will form a peeling phenomenon.

Water supplement

In the process of barbecue, the longer the time, the greater the loss of water and oil, and the dry the taste.Therefore, in the process of barbecue, you should use some barbecue sauce on the food to keep the food moisturizing, but be careful not to brush too much at a time, causing too salty food.

Salt use

Salt can be used to season.In addition, during the barbecue process, many fat -containing foods will drip oil after heating. These oil droplets are burned by charcoal fire to produce high flames and foods on the grill grilled grilled grid.If you spray water with water, only the ash pollutes food. At this time, you can solve the problem as long as you sprinkle some salt in the fire.

Diamond grill

The authentic diamond -shaped marks can definitely make the baked technology icing on the cake.It is not difficult to bake the rhombus marks. First of all, the temperature of the charcoal fire should be hot enough, and then put the food at a 30 -degree diagonal angle on the grill. When the food is fully heatedRhododating marks.

Third, the main techniques of barbecue

1. "Direct barbecue" and "indirect barbecue"

You may ask: Isn't the barbecue burning meat and other foods on fire?No, European barbecue can have a variety of methods such as shredding, baking, baking, and fried. Among them, the "burning" belongs to the bright fire barbecue and is also called directly grilling; the others are called indirect barbecue.

A. Bakery directly

Put the ball carbon in the center of the barbecue stove carbon rack.

Put vegetables and meat in the center of the grill directly.

B. Indirect barbecue

The ball carbon lits at both ends of the carbon rack.

Meat vegetables are placed in the middle of the barbecue rack.

Cover the furnace cover, adjust the fire with the wind door, and make the food cooked by smoking.

2. Master the barbecue time and heat of common food

The quality of barbecue food is affected by the length of the barbecue time, the grasp of the heat, the choice of barbecue equipment, and even the environment at that time.To achieve the best barbecue effect, the above factors are not to be ignored, especially the control of barbecue time and heat.

Under normal circumstances, indirect barbecue methods are longer than direct barbecue methods.

3. The basic steps for assembly, ignition and barbecue

Prepare the parts and carbon materials for assembling barbecue stoves, assemble the barbecue, bracket and enclosure in accordance with the instructions, and then burn the baked carbon

1. Put a layer of charcoal on the charcoal network and pile it into a pyramid shape. Pour in alcohol and other combustion agents and fully absorb the charcoal. The time is about one minute.

2. Carbon began to burn, accompanied by a small amount of black smoke.Add the grill at this time.After burning for 10-15 minutes, the charcoal was evenly spread out at this time, and the hand was placed above the baking network, and the hand was hot.

3. Switch food that needs to be grilled in the middle of the grill, and strive to heat uniform food everywhere.

4. During the barbecue process, adjust the location of the food as needed to heat evenly.If the barbecue is a large and thick food such as beef steak, it should be cooked on the other side, otherwise it will be difficult to bake and may be burnt.