Articles in Categorys Balcony Garden

What are the types of aisle lamps?

1. Embedded downlight

Embedded downlights are divided into horizontal downlights and vertical downlights, and the depth and width, width and width of each downlight cup are different, the styles are also diverse, and the light curves are different. ThereforeDibn Lights should be a warm small -power energy -saving lamp, which can create a warm, romantic and serene atmosphere, and better coordinate with the building.However, pay attention to the height ratio of the lamp during installation, so that the light spots will not cause uneven lighting.

2. Box -type fluorescent lamp

The box fluorescent lamp is also called a fluorescent lamp. If a box -type fluorescent lamp is installed on the corridor, there are two installation methods, which are embedded in installation and suction installation.The installation method of these two box of fluorescent lamps is related to home improvement style, but the top -up installation method is more three -dimensional than embedded installation.In addition, the choice of box -type fluorescent lamps in the corridor should also be cautious. It is better to choose a small -power fluorescent lamp as much as possible. The color of the Lights should be coordinated with the color of the overall home.

3. Lantern wall wall

The installation of the light curtain wall on the corridor will make the entire home wall or ceiling show uniform light color. This decoration design makes the home more warm and comfortable.However, the design of the lamp wall design has high requirements for the layout and design of the overall home light, and it is best to match each other between the lamps.

4. LED ground foot Lights

LED floor Lights are installed on the corridor, which is very convenient for people to get up to the toilet at night. This will not affect the rest of others without turning on other Lights. MoreoverThe shape of the shape is unique, and it can also be waterproof, dustproof, leak -proof, pressure resistance and corrosion resistance, so it is popular.

5. Shooting Lights

The shooting light is a typical light -free lamp, a non -fixed -scale modern genre lighting, which can create an indoor lighting atmosphere. If a row of small spotlights is combined, the light can change the wonderful pattern.Installing a shooting light in the aisle can set the furniture atmosphere. There are many decoration methods of the shooting Lights. Fiber can directly illuminate the objects to highlight the aesthetic effects. The environment is rich in the environment.The best decorative effect.

6. Wall lamp

The Wall lamp is generally equipped with a glass cover. The reflection light of the wall can make the light softer, and it has multiple effects of projection and blooming light. It shows different appearances due to the different residential materials.The decorative effect of wall lamps is generally more obvious than lighting, and it is also good for aisle Lights.

7, ceiling lamp

Press the structure of the structure beam on the corridor.This method is often used in engineering design.It is suitable for the stairs or corridors of dormitories, apartments and other residential buildings such as dormitories, apartments, etc., and scientific research buildings, especially on the outer corridor.The ceiling lamp is equipped with a dust -proof cushion ring, which has good sealing performance. It can avoid small flyworms enter the lampshade, suitable for places with more wind and mosquito in the outer corridor.For these types of lamps produced by regular manufacturers, the materials selected by the lampshade are good, and the light is soft, the light is soft, the color is not easy to change, and the lamps are more efficient to achieve better results.

How to choose the corridor light

1. Wall color

When buying a corridor light, you must consider the color of the wall.Generally, the color of the wall of the corridor is white. If the Lights of the corridor light are also white, it will look very monotonous, so Xiaobian recommends that the corridor Lights should choose warm pink, purple or blue, etc.It is one.

2. Decoration style

When buying a corridor light, you must also consider the overall home improvement style.For example, the home improvement style is retro decoration, then the corridor light should be retro, so that the entire home environment will be warmer and better. If there is a pattern configuration on the lamp, it will be projected when used, and the visual effect tiger is better.

3. The area of the corridor

(1) Inner corridor

The inner corridor is generally set at home, so you can choose indoor Lights.Generally commonly used indoor Lights include small suction top lamps, ceiling lamps, wall lamps, etc., mainly based on personal preferences or design space and environment.

(2) outer corridor

For the outer corridor, it is generally in the courtyard, Park or villa, and is generally Outdoor lights.For example, Outdoor wall lamps, Outdoor wall lamps, etc., what types or styles of lamps are installed, the key is to depend on the decoration style or environment of the corridor.

1. Electric Barbecue oven indicator is not on

maintenance method:

1As well asPower plugs are not in contact with sockets, and plugs and sockets should be replaced or repaired.

2As well asThe power cord core is broken and the power cord can be replaced.

3As well asThe thermostat contact is burned, repaired or replaced with the thermostat.

4As well asPoor contact head in the timer, repair or replace the contact.

Second, the electric Barbecue oven is not hot

maintenance method:

1As well asConfirm whether the indoor power supply is out of power.

2As well asCheck whether the power cord of the electric barbecue stove is disconnected, and whether the power plug and the podium are poor.Find out the disconnect and pick it up again, and wrap it in the insulating gel cloth.If the plug and socket are damaged, it will be replaced.

3As well asCheck whether the heating device is loose, and whether the heat of the heating device and the socket is good.Poor contact, recreate.If damage is severely replaced.

4As well asThe electric wire is burned.Replace new products with the same specifications.

5As well asThe switch touch of the switch, the temperature regulator, and the timer loses elasticity;;The contacts are severely abstructed or poorly exposed.Find damaged parts to repair or replace new products with the same specifications.

Third, the temperature controller of the electric Barbecue oven fails

maintenance method:

1As well asThe thermostat tactile loses elastic or contact bonding.Replace the losing elastic tactile or use a fine sand cloth to repair the contact.

2As well asThe rotating thread Sleeve is rotated with the rotor, and the position of the fixed touch cannot be adjusted.Fixed thread cover.

3As well asThe porcelain beads on the dual metal tablets are damaged or falling off, causing the dual metal sheet to reach the tactile tactile.Replace porcelain beads or tight porcelain beads.

4As well asDouble metal pieces are damaged.Replace new products with the same specifications.

Fourth, electric barbecue furnace time switchdamagebad

maintenance method:

1As well asDelivery or bonding.Use fine sandpaper to be carefully polished and Smooth.

2As well asThe springs are weak and replaced.

3As well aswatch spring or gear damage and replace the damaged parts.

5. The electric barbecue stove door is stuck or closed

maintenance method:

The stuff of stuck in the furnace door is that the door bead protruding too many spring boxes, the stuck cannot be shrunk, and the door bead is adjusted again.

The main point is that the spring is weak, loses elasticity, and replaces new springs.

6. Electric barbecue furnace door glass damage

maintenance method:

The main reason for this kind of failure is that the pressure screw is pressed too tightly, or the glass door is drenched by cold water during high temperature baking.

Use heat -resistant glass to replace according to the original specifications, and avoid the above conditions when used.

7. Electric Barbecue oven leakage electricity

maintenance method:

1As well asThe sealing and insulation material of the heater to withstand the high temperature and reduce the insulation performance and cause the leakage, re -sealing.

2As well asThe heater socket has electrical dirt to reduce its insulation performance, and wipe the electrical dirt with a dry cloth.

3As well asConvert switches, insulation switches or timing switches to reduce the insulation performance, and perform dry treatment.

4As well asElectric deep lines or plug insulation layers are damaged and replace new products.

5As well asThe wiring head was loosened and touched with the shell, and the loosening head was picked up.

1. Where is the bedside Wall lamp installed better?

The Wall lamp on the bedside is generally installed in the upper left position of the bedside. The lamp head can be rotated and easy to read. So what is the installation position of the bedside lamp?

1. The installation position of the bedside Wall lamp is generally above the bedside. Generally, there is a double -headed lamp or one on both sides in the middle.But to remind, if the wire head is not reserved on the wall before the decoration, it is best not to choose the Wall lamp as the bedside lighting.Because the Wall lamp is often installed in the middle of the wall, there is no dark line, you need to pull a wire on the wall according to the position of the Wall lamp, so that the Smooth wall surface looks not beautiful.

2. The bedside Wall lamp switch should be reached out. No matter what bedside lamp you choose, you must consider whether the lamp is easy to switch and adjust.If the switch on the bedside wall is not allowed to reach out when lying down, then when you are drowsy and want to turn off the Lights, you have to work hard to find the switch or adjust the brightness again.It's right.

2. How to buy the bedside lamps

1. lighting quality

When buying the bedside lamp, first look at the quality of the lamp itself.Lancouns are usually made of glass, sheepskin paper and other materials, and brackets are generally made of metal.The lampshade mainly depends on whether its light transmission is appropriate. It is advisable to use the low surface brightness of the beaming material lampshade, and the surface pattern should echo the overall style of the bedroom. The color should not be too bright.It is also necessary to check whether the metal's corrosion resistance is good, and whether the color and luster are bright and full are important indicators to check the quality.

2. Light brightness

Generally speaking, the bedside Wall light is good for softness, and the degree is less than 60 watts.In addition, you should choose different types of bedside Wall lights according to the installation needs. For example, if the bedroom room is small, use a single Wall lamp, and the double -headed Wall light is used in large rooms;of.

3. lighting size

Generally, for the size of the bedside Wall lamp, we mainly choose according to the actual area of the bedroom. This not only allows the bedroom space to have a warm feeling, but also beautiful.

4. Practical performance

The bedside Wall lamp is suitable for light bulbs that can be tuned, so that the adjustment that can be adjusted during reading is relatively bright, and the softness and hazy adjustment when you sleep quickly.Light's bedside Wall lamp.Of course, if you are a double bed, you should choose the bedside lamp of the lighting switch, so that one of them can not be disturbed by light when reading a book.Finally, it should be noted that it is best to choose the bedside lamp with a protective cover, which can prevent danger.

Third, the installation method of the bedside Wall lamp

1.

Use a brush to paint the adhesive on the adhesive surface. This is the easiest and most commonly used method.

2. Spraying method

For low viscosity adhesives, ordinary paint spray guns can be used for spraying.For those high -viscosity adhesives with short active periods and difficulties in cleaning, you can use Berte spray guns in the enhancement of the plastic industry.The advantage of the spraying method is that the glue is uniform and the efficiency is high; the disadvantage is that the glue is large (about 20-40%), and the solvent is lost in the air to contaminate the environment.

3. Self -flowing method

Use rainy automatic device.This method is very suitable for flat plate -shaped parts, with high efficiency and suitable for large -scale production.In order to prevent the glue from blocking the nozzle, the glue used must have appropriate viscosity and liquidity.

Four,Bedside Wall lampHow much height is appropriate

The installation height of the bedside wall has no special requirements. It mainly depends on the height of the bedside. Generally, it is more appropriate to be about one meter five to one meter eight.If the Wall lamp is out of the wall, the distance from the wall should be kept from about ten centimeters to 40 cm.If the height of the bed is forty -five centimeters, and the total height of the Mattress is 90 centimeters, the height of the Wall light should be higher than 90 centimeters, and it needs to be installed on the bedside table.

1. Standards for green management and maintenance of community

First -level maintenance quality standard

1, Sufficient greening, reasonable plant configuration, to reach the loess without exposing the sky.

2, Garden plants reached:

(1) Good growth momentum

(2) Ye Zijian

(3) branches, dry and strong

(4) Good measures: Careful maintenance according to the requirements of first -level technical measures.

(5) There are basically no strains of the sidewalk tree

(6)The lawn coverage should basically reach100%; The weeds in the lawn are controlled in10%Inside; the lush color is normal and not yellow; trim the warm ground type every year6Over time, cold ground type15More than or above; no pests.

3There are no dead trees in the sidewalk trees and green spaces. The trees are reasonable and beautiful, and the trees are beautiful. It can solve the contradictions between trees and wires, buildings, transportation, etc. in time.

4, Green production garbage(Such as: branches, leaves, grass foam, etc.) The sections of key areas can be achieved with the production, and other areas and sections can be made in Nissan; green areas are neat, brick -free tiles, baskets and plastic Bags, etc.Make regular cleaning.

5The garden facilities such as railings, garden roads, tables and chairs, manhole covers and decorations are complete, so as to maintain and decorate in time.

6There is no obvious human damage, there are no stacks, sheds or occupation in the green space and lawns;2There are no piles in the rice range, shed stalls, circle fences, etc. affect the management and growth of trees (2If there is), there should be protection measures.

Second -level maintenance quality standard

1The greening is relatively full, the plant configuration is basically reasonable, and the loess is basically not exposed.

2, Garden plants reached:

(1) The growth momentum is normal

(2) The leaves are normal

(3) Normal branches and dry

(4) Measures: Careful maintenance according to the requirements of secondary technical measures.

(5) The lack of the sidewalk tree is 1%the following

(6)Lawn coverage rate95%aboveItemsWeeds in the lawn are controlled in20%Inside; Growth and color are normal, not yellow;Repair the warm ground twice every year, cold ground type10More than; Basically no pests.

3There are no dead trees in the sidewalk trees and green spaces. The trimming of the trees is basically reasonable, the tree is beautiful, and it can better solve the contradiction between trees and wires, buildings, transportation, etc.

4, Green production waste must be made in Nissan, there are no obvious waste in the green space, and they can insist on assaulting cleaning before the major festival.

5The garden facilities such as railings, garden roads, tables and chairs, manhole covers, and decorations are basically complete, and they basically maintain and decorate them in time.

6No more people are damaged.It is damaged for people who are not controlled by mild or occasionally. They can be found and dealt with in time, no stacks of stacked materials in green space, green space, stacks in the lawn, sheds or occupation, etc.ItemsThere is no obvious nail embolism to portray the trunk of the sidewalk, and the tree is from the tree2There is no stack of stacks, sheds, circle fences, etc. within the rice without affecting the management of trees.

Three -level maintenance quality standard

1The greening is basically sufficient, the plant configuration is average, and the exposed land is not obvious.

2, Garden plants reached:

(1) The growth potential is basically normal

(2) The leaves are basically normal

(3) Basically normal branches and dry

(4) Measures: Careful maintenance according to the requirements of third -level technical measures.

(5)The lack of plant trees3%the following

(6)Lawn coverage rate90%aboveItemsWeeds in the lawn are controlled in30%Inside; Growth and color are normal;Remove warm ground grass every year1Over time, cold ground grass6Over the times.

3There are no obvious dead trees in sidewalk trees and green spaces. The trimming of the trees is basically reasonable, which can better solve the contradiction between trees and wires, buildings, transportation, etc.

4The main areas and sections of green production of green production can be made in Nissan. Other regions can adhere to the waste cleaning in the green space before major sections.

5The garden facilities such as railings, garden roads, and manhole covers are relatively complete, and can be maintained and decorated.

6It can be processed in time for man -made damage.There are no piles of materials in the green space, shed occupation, etc. The nails on the trunk of the sidewalks are less painted. There are no stacked lime under the trees that have burns and poisoning substances, and there are no shed stalls and the wall ring occupied trees.

Second, community green management and maintenance plan

1Watering

Different varieties of plants require different water volume,,Different seasons of plants are also different in water,,Make it according to the specific situation when watering.Generally, willow should be poured more,,Pine cypress is not suitable for pouring,,Newly planted small trees should also be poured appropriately,,The amount of watering should be adjusted appropriately under different climate conditions,,summer temperature is high, evaporates fast,,The amount of watering should be increased appropriately;;After the autumn, the sun is weakened,,If you evaporate less, you can pour less appropriately,,The rainy weather, the semi -shade environment can be poured less or not poured.

Generally, trees are planted every year3As well as4As well as5As well as6As well as9As well as11Pour water once a month,,Pour through once when watering,,Avoid only wet surface soil.Joemu is at least continuous watering3 ~ 5Year,,shrub5Year,,If the soil is not good, it should be extended,,After the trees grow up, you can reduce the number of watering times year by year,,After growing into a big tree, you can not water it or only pour in a year1 ~ 2Second-rate.

2, Fertilize

Plants grow in a fixed position for a long time,,Absorb nutrient around the place all year round,,If you do not replenish in time,,It will cause nutrients to reduce or exhaust their nutrients,,Affects the normal growth of trees:::Timely fertilization has become an important part of maintenance work.There are many types of plants in the green space in the community,,When fertilizing, different Fertilizers and different dosage should be selected according to different plant varieties and growth stages.When fertilizing, Fertilizer should be buried in Fertilizer10 ~ 40cmDeep soil layer,,In order to facilitate the infiltration of Fertilizers into the ground,,Reduce the amount of Fertilizer.

3, Plastic Surgery Pruning

Plastic trimming is to ensure a good tree shape,,Effective means to improve the effect of rewarding concept,,It is also an important part of maintenance work.The basic methods are mainly sparse branches, short -cutting, and peeling buds.

Sparse branches,,It is to cut part of the dense, useless, and poor growth branches,,To ensure strong trees,,Expand the custard,,Form a beautiful tree posture.When sparse branches, we must follow the order of first big branches, rear branches, and then small branches,,Consider the current tree shape and long -term skeleton.Cut the mouth or saw the mouth close to the mother branch,,Can't stay,,In order to facilitate wound healing.The reserved leadership branches must be upright and strong,,The main branch oblique angle and direction are good,,Large branches and small branches are expanded reasonably,,Trees are short.

Short,,It is to cut the branches from the middle,,To suppress its growth,,Promote the balance of the main branches.Pay attention to the direction of the buds under the cut of the mouth,,General buds of buds out of the branches,,Expand the custard,,So the buds under the cut mouth should be full and strong buds,,To ensure the growth of the branches.

Sprout,,Is the newly issued tender bud or tender branches and roots.,,To reduce the useless young branches,,Make nutrients concentrated.In essence, it can be understood as a form of sparse branches,,It is necessary for the newly planted young trees and short trimming young trees.

4, Weeding, loose soil

Weeding is to remove the weeds in the green space,,Keep the green space tidy,,Reduce weeds and trees to compete for water Fertilizer,,It is conducive to the growth of trees;;at the same time,,It also cleared some of the latent places of diseases and insects,,Reduce the chance of pests and insect pests.The pine soil is loosened on the surface of the soil,,To increase the breathability of the soil,,Real the effect of retention, breathable, and temperature increase.

5, Prevention and treatment of diseases and insect pests

The prevention and treatment of diseased pests should formulate targeted measures according to the green space plant varieties and local pests in the local area.,,Mainly prevent prevention,,Comprehensive governance.spring is the season of pests and insect pests,,Must focus on governance;;In summer, we mainly pay attention;;Pay attention to killing overwinter eggs in autumn and winter,,Lay the foundation for the prevention and control of the year.

(1)Tree:Watering, fertilizing, loose soil, trimming2Subject to the annual spray3Second-rate;

(2)Hea: Headi:Regular watering, fertilization, trimming3Subject to the annual spray3Second-rate;

(3)lawn:Watering, fertilization, weeding on schedule, spray medicine every year2Second-rate.

3. Who is the greening of the community?

The greening of the community is constructed by the development enterprise according to the requirements of the planning approval. The garden department is responsible for acceptance. After delivery, the property service enterprise in the community is responsible for maintenance.Therefore, the greening problem of the community is generally managed by the property company.

The greening problem of the community can be feedback from the owner committee.Regarding the issue of community property management, in accordance with the "property Management Regulations" issued by the State Council, the owner can complain to the real estate administrative department of the local people's government at the district and county level of the property.The legal channel includes:12. Make administrative reconsideration and administrative lawsuits on the local real estate administrative department.22. Make a civil liquidated or infringement of developers and property management companies.

1. How to look at dry and wet in potted nutrient soil

The wetness and weather of the soil, the texture of the soil, the permeability of the potted plants, and the nature of the plant itself have a greater relationship. So how do you see the dry and wet in the potted nutrient soil?

1. Tap method: Gently tap the finger joints to gently tap the pelvic wall on the middle of the Flower pot.Do not water for the time being.

2. Visual inspection method: Use your eyes to observe whether the color of the surface of the pot soil changes. If the color becomes lighter or light -gray white, it means that the pot soil is dry and water is required.It is wet and not watered for the time being.

3. Pointing and testing method: Gently insert your fingers into the pot soil about 2cm and touch the soil. When you feel dry or rough and hard, it means that the pot soil is dry and you need to water immediately; if the slightly humid, delicate and soft, it meansThe pot soil is wet and not watered for the time being.

4, pinching method: twist the pot soil with your fingers, such as the soil into powder -like, indicating that the pot soil is dry and water should be watered immediately.

5. Use soil humidity meter: The above four test methods are all experiences. They can only tell people the approximate situation of the dry and wet pot soil.If you need to know the dry and wetness of the pot soil, you can buy a soil humidityometer at the store, insert the humidity meter into the soil, and see the words "dry" or "moist" appear on the scale.Soil and humidity.

2. How much is the potted nutrient soil

The Nutritional soil is very good, and the water and Fertilizer ability is extremely strong. Sometimes it will not dry for half a month at a time. If the pot is deeper and there is no drainage hole, it is easy to have the phenomenon of stagnant water rotten.

For most Succulent plants, they cannot be planted directly with Nutritional soil, because the roots of Succulent plants do not like a humid growth environment, and need to add a little river sand, vermiculite and pottery to nutrient soil.Evaporation allows the air circulation inside the soil to circulate, and there will be no rotten roots.

Under normal circumstances, it is mixed with Nutritional soil and ordinary soil 3: 1, or 1: 1, which depends on the specific plant.Nutritional soil itself contains nutrition, but if the ordinary soil is miserable, some Fertilizers can still be applied in the later period.