[Material of the lampshade] How to clean the lampshade what the material is good for different materials?

What is the material of the lampshade?

The lampshade, as the name suggests, is a kind of cover set on the bulb or outside the lamp flame. It has the effect of preventing wind and rain and concentration. It looks like a small lampshade.Formed, let Xiaobian take everyone to enjoy some good -looking lampshade pictures together, and deeply understand the manufacturing materials of the lampshade.

First of all, Xiaobian will introduce the first type of lampshade: milk white lampshade, milk white lampshade is divided into transparent PMMA color powder, transparent PC bonding, transparent PC matte powder, glass fluorescent powder, transparent PC light diffusers, transparent PC,The following is the detailed introduction of them:

1. Transparent PMMA color powder: The lampshade made of this material has a low cost of the material and a little transparent. It can be seen by the light source, but its light transmission rate is low, and the disadvantages of uneven light diffusion.

2. Transparent PC edges: The lampshade made of this material has a high mechanical strength and a good light transmission rate, but it will cause lithography and the effect of light diffusion.soft.

3. Transparent PC frosted powder: The lampshade made of transparent PC frosted powder can cover the lamp beads, so the light transmission rate will be greatly enhanced, but the fog is low, the light loss is very powerful, it will reach 40%, the diffusion of light will spread, and the diffusion of light will spread.The effect is average.

4. glass fluorescent powder: It has the characteristics of low cost and good conservation effect, but it is easy to break and it is not convenient to transport.

5. Transparent PC light diffusion agent: The light diffusion agent itself has the effect of softering the light. The use of the lampshade made by it will make the light of the light softer and the appearance is very beautiful, but its weather resistance will be resistant to, but its weather resistance will be resistant to, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will be resistantGenerally, the degree of light loss is 30%.

The second type of lampshade: transparent lampshade. This lampshade mainly uses two materials: glass, PC and PMMA.

1. glass: The lampshade made of glass is very light transmitting. Basically there is no light loss. If the tile of the lamp is high, the light of the glass lampshade will be dazzling and easy to break.

2. PC and PMMA: The light transmission rate of the lampshade of this material is very high, and the light loss rate is small, but the diffusion light will be dazzling.

This kind of lampshade, the appearance of the appearance is very European -style furniture manufacturing style. The use of advanced steel to make the framework of the lampshade, which is not easy to deform, and then use transparent PC and scrub powder to make lampshades.In the form of petals, coupled with hand -drawn patterns, a strong sense of art.

How to clean different materials lampshade

Fold lampshade

Scrub with a cotton swab dipped in water.

crystal beaded lampshade

If the lampshade is made of crystal beads and metals, it can be directly cleaned with neutral detergent.If the crystal beading is put on, it is best not to wet the wire, and wipe it with a soft cloth dipped in a neutral detergent.

Fabric lampshade

You can use the vacuum cleaner to take away the surface dust, and then put a little furniture detergent or detergent on the rag.If the inside of the lampshade is paper material, it is best not to use liquid washing agents such as detergent, detergent, detergent to avoid erosion.

fruits glass lampshade

It can be wiped with soft cloth, and you can dip a little toothpaste to make cleaning more thoroughly. Toothpicks can be treated with uneven places.

Resin lantern

You can use a dedicated tweezer or chemical fiber to clean, and then spray the anti -static spray immediately to prevent static electricity.

1. What are the differences between Solar street lights and split body

According to different structures, Solar street lights can be divided into two types: integrated Solar street lights and split -type Solar street lights. They all use Solar -driven street lights, but there are differences in the following aspects:

1. Different components

The split Solar street light is composed of batteries, LED lamp heads, photovoltaic boards, controllers, and light rods. The lamp rod must be paired.The battery, LED lamp head, controller, and Solar panels of the integrated Solar street lights are together in the lamp head.

2. Different prices

Due to design reasons, the power and battery capacity of the integrated Solar street lights are generally small and the cost is generally lower and the cost is lower. Therefore, in the same specifications, integrated Solar street lights are much cheaper than scaled street lights.

3. The complexity of installation is different

The installation of integrated Solar street lights is more convenient. It can be installed with screws, while the split Solar street lights need to be assembled, wiring, installation of battery brackets, lamp heads, battery pits, etc., which are relatively complicated.

4. Different technical parameters

The technical parameters of the split Solar Lamp ranging from 10-80W, or even higher; integrated Solar street lights are generally 10W, 20W, 30W, 40W.

5. Different application scope

Communities, factory districts, industrial parks, and rural roads.

6. Different maintenance methods

There is a difficulty of solving the lamps. The split Solar street lamp needs to be sent to the local area to repair the local technicians to investigate the battery, photovoltaic board, LED lamp head, electric wire, etc.Just send it directly to the factory and send it to the manufacturer for repair.

Second, the Solar street light is one better or the split is better

Compared with the split Solar street lights, there are many differences compared to the integrated Solar street lights, so which one is better?

1. From aesthetic perspective

Generally speaking, the integrated Solar street lights look more compact and exquisite, and the split Solar street lights can easily give people a visual "pressure", beautiful atmosphere.

2. From the perspective of efficiency

Although the integrated Solar street lights are integrated together, which reduces visual pressure, it also limits some functions. For example, under the same conditions, the larger the area of the Solar panel, the greater its photoelectric conversion efficiency.

The split Solar street lights can be customized according to the requirements, while the integrated Solar street lights are not so free. It is also necessary to consider the space occupied by other components, so there is also some restrictions in efficiency.

3. From the perspective of security

The Solar street lights are installed outdoors. Some people who have an unraoped heart can easily hit it on it. Whether the split -type street light battery is buried underground or on the light rod, there is always a risk of being stolen.And integrated Solar street lights, if you want to steal the battery, you can only move the entire street light, this possibility is relatively small.

In general, the integrated and split Solar street lights have their own characteristics. There are no absolute differences. We can choose according to the actual requirements.

1. Heating pipe decoration

1. Hide

Hidden is to hide the water, heating, hood and other pipes such as some furniture or shape design.The upper and lower water pipes and gas pipes of the restaurant and kitchen can be designed as wall furniture, such as wine cabinets, wallcathers, corner cabinets, etc.;, Can design a set of Hanging cabinets, hiding the range hood and hoods in the Hanging cabinet.The top or first -layer housing often has a heating pipe through the indoor window, which can be hidden into the curtain box, so that the baffle of the curtain box covers all the pipes.Make full use of wall furniture or wall decoration to hide pipelines, which can not only hide the pipeline in the furniture, but also increase the storage space.

2. Smooth decoration

The decorative radiator pipeline does not have to be hidden, and it can also be beautified by using it to make some decorations.If the pipeline design can be painted with different colors to make it a creative shape; or the pipeline is wrapped around with plastic flowers and plants, and the pipeline is decorated as a trunk, which will produce a unique decorative effect.

3. Buried Tube

The buried Tube is to bury the buried pipelines under the surface layer through the decoration of the wall, the ground, and the top.Various bright lines such as wires and telephone cables can be used in the wall of the wall -buried lines on the wall. When the wiring, it is necessary to lay a dark Tube. Be careful not to bury the wire directly into the gray layer, because this is not only not conducive to the future replacement of the line replacement in the future.And it is also very unsafe.If it is slotted on the wall of the reinforced concrete, the machine should be cut with a machine, and an electric hammer should not be used. The electric hammer can easily loosen the wall around the buried groove and destroy the wall structure.All kinds of bright lines can also be buried offline through the gypsum line or skirting line around the top surface.

two,radiatorHow to decorate

In order to ensure that the home can have good heat dissipation and perfect decoration effects in the home, friends must consider the future use effect of the heating tablet in the designs of the heating tablet, but also consider the decoration effect.Avoid leaving any regrets in the decoration.

1. Hidden processing of Heating tablets -heating louver/heating cover

The display cabinet and the heating cover are combined with one.The general heating hood is determined according to the height and length of the heating itself. Although it is economical and practical, it is inevitable that they are the same.You may wish to create a simple and practical small display cabinet in the location of the heating, and keep the heating bag in the display cabinet, leave the maintenance door in front, and make it from the top of the display cabinet with glass and board.In this way, the heating cover not only beautified, but also made full use of the space.

The display cabinet and the heating hood are used to make heating shuttle with more wood in the past, which is beautiful, but it affects the heating heat dissipation. Many designers are distressed by this.However, if you use punching iron plates to make heating shutters/heating masks, you can make full use of the characteristics of good metal thermal conductivity, which can make the decoration and heating.

2. color treatment of radiators

The simpler and effective way is to brush the radiator with monochrome paint (such as white, light blue, etc.), and make a wooden shelves slightly wider than the radiator on the radiator. The thickness is about 40mm, the surfaceBrush the paint or mixed oil, put a bottle of flowers or a group of family photos on it, making people feel simple, warm, elegant, and romantic after watching.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

1. Can the Sunshine house use a glass film?

If the Sunshine room is not pulled up in the summer, it is like a stove. The furniture inside will be faded for a long time. The sun room is pasted with a building film or replaced the thermal reflection glass, so is the sun room sticker building film?

The Sunshine room can be used to shade through the building film.

1. Economy: The combination of tempered glass and glass stickers, the effect is similar to the thermal reflected glass, but it saves a total cost of about 50%than replacing the thermal reflected glass.

2. Convenient: Pass directly to the building film more convenient and fast than replacing glass.

3. Environmental protection: The existing glass is used directly to the building film for the sun room to upgrade its heat insulation and safety performance, which will not cause pollution and waste.

4. Safety: In addition to the insulation of the building film for the sun room, it also has a certain safety enhancement function to protect the glass and prevent the glass rupture from hurting others.

5. Lightweight: If you choose to change the glass, the total weight will increase, and the building composite will increase. If only the building film is pasted, there is almost no change in weight.

Taken together, the Sunshine room sticker glass film is quite good, so what kind of film is good for the sun room?

2. What architectural film is suitable for Sunshine room posting

There are many types of building membranes. Generally speaking, the application of the Sunshine room is a thermal insulation film. The benefits of thermal insulation film are mainly:

1. The thermal insulation film can make the temperature difference between indoor and Outdoor 3-7 C. When turning on the air conditioner in summer, a part of the electricity cost can be saved, and the indoor calories will not be emitted quickly in winter.

2. The thermal film can also block certain ultraviolet rays. Generally, its installation glue contains UV absorbers, which can block 98%-99%of ultraviolet rays to prevent ultraviolet sunburn.

3. The heat insulation film used in the sun room also has the fragments of the glazed glass. It can paste the glass fragments to avoid the glass residue after the glass is broken.

The role and specifications of the ground lamp

1. There are two points of the ground lamp. One is to provide lighting for pedestrians to avoid falling or hitting because the light under the feet is too dark.The second is to illuminate the flowers and trees on the ground to create a beautiful visual effect.

2. With the continuous improvement of the research and development technology of ground lamp products, it has a lot of color changes, and its role in Outdoor landscaping projects has become more and more.The ground lamp has become a very important member of the landscape lamp.

3. The specifications of ground Lights are generally not large. The common specifications are 10cm diameter, 16cm diameter, 20cm diameter and 25cm in diameter.The ground lamp is buried at the ground level, and the area is too big.

4. The floor light does not require very bright light. It provides hazy and beautiful light, so the power is not high. Generally, between 3W and 20W, it is commonly used. It is commonly used.

5. The color of the ground Lights was relatively monotonous in the past and cannot produce changes.But now with the improvement of technology, it has more and more colors, and it can control color changes through micro -computers to form a beautiful and beautiful scenery.Therefore, the ground Lights can be used not only on the lawn and pedestrian lanes, but also used beside the music Fountain to create a dreamy scenery with music Fountains.

How to choose a high -priced floor lamp

1. The floor lamp is installed under the ground. It is not convenient for maintenance and replacement after installation. Therefore, you must pay attention to the quality of the product when selecting the floor lamp products. Choose a durable high -quality product, otherwise it will bring a lot of inconvenience to the post -use.To repair or replace the ground Lights, it is often necessary to renovate the local ground, and the construction cost is large.

2. There are many light sources used in ground lamp products, and Solar LED floor Lights are better.The energy used by this kind of floor lamp products is the power of solar energy conversion, and the light source used is LED energy -saving lamp, which gives it a huge advantage in energy saving.In addition, the LED light source has a long service life, the economic cost is greatly reduced, and the cost performance is very high.

3. Be sure to check whether it has a qualified certificate when buying a floor lamp.Only the products that meet the production standards can obtain a qualified certificate with a certain product quality, and buying such a product can ensure performance and quality.If you do not have a qualified certificate, then there are three products.It is best to buy well -known brands, because these manufacturers' credibility is very high.

The role of ground lamps is introduced to everyone. In fact, in addition to being used in public, the floor lamp can also be used in the home courtyard.When buying ground lamp products, pay attention to quality and performance. Although the price is also an important factor, it cannot only consider the price and ignore the quality.Comprehensive cost -effective products are the best.