1. What light is suitable for the study?

1. table lamp

LED light sources in the study are relatively common.However, the bad LED light source may have a glare, and it will have a bad effect on the eyes. Therefore, when choosing the LED light source, you must be very careful.

2, ceiling lamp

The lighting of the study is not suitable for too large, nor is it suitable for too small.The main light can be used to use the ceiling light.

3, floor lamp

If you have a reading sofa chair in the study, you can place a floor lamp next to the sofa to provide local reading lighting.

4. Shooting Lights

Small shooting Lights can be installed in the bookcase, which can be decorated with bookcases, which is also convenient to find books.

2. How much watt is fit for the study?

Generally, the lamps of the study are almost about 40 watts.

3. The main points of design of the study

1. Add table lamps to the desk to strengthen reading lighting

If you want to sit in front of the desk, only indirect lighting is not enough. It is best to set up a table lamp at the corner of the table, or set up a Hanging lamp on the top of the table for key lighting.Especially when there are children in the home, in addition to the desk design must be adjusted with it, at the part of the local light source on the desk, it is best to choose an electronic table. It is best to try whether there will be flashing before purchasing.The situation occurred.

2. indirect light source to enhance the quiet atmosphere of the study

Indirect lighting can avoid the visual dazzling damage caused by direct light radiation, and it is a bit tired to turn the Lights on the light, and it will not want to be in this space for too long. Thinking is not easy to concentrate.Therefore, in designing the study, it is best to treat the indirect light source, such as the hidden light source around the ceiling, so that the calm atmosphere of the book can be set up.

3. Use rail Lights to direct bookcases to create visual scenes

Bookcases can also create interesting effects through light changes. For example, through the design of orbit Lights or embedded lamps, let the collection or items on the bookcase on the bookcase change the visual focus of the end view.

4. Aversion of light source direct computer screen

Because the computer screen itself will emit strong light, if the light of the space is too bright, it will reflect on the screen, the eyes are easy to be uncomfortable, and the words on the screen cannot be seen.But if the computer screen is only on, and the surroundings are darker, the vision is prone to fatigue.Correct practice: It is not allowed to make the brightness of the two from dark, and the brightness of the two should be similar. When reading the text in the computer for a long time, it is not easy to get fatigue.

5. Keeping natural light is important

The study room is suitable for reading. It is best to build the location of the study in the place where there is a natural light source. Even if it is shared with other spaces, such as the master bedroom or the corner of the living room, the location of the desk is best to be close to the window.In addition, the design of the study of the natural light source can be adjusted through the design of the shutters.

Most of the study decorations are elegant and quiet, giving people a quiet and calm feeling. Only in this way can it be more suitable for quiet reading.The design of the study of the study is the focus of the study in the study. Similarly, the lighting design in the bedroom, living room and other rooms also deserves our attention.

[kitchen storage shelf] How to buy kitchen storage racks, how to use the kitchen storage rack for storage

How to buy the kitchen storage rack

There are many types of kitchen storage racks on the market. How to choose a suitable size Kitchen rack is a headache for the housewife.In general, the selection of kitchen storage racks should be screened according to the actual situation of the family.For example, a bowl rack, the housewives can first consider whether the size of the kitchen space in the home chooses or desktop; secondly, the number of dishes in the home must be considered.For another example, the housewives should first consider the space near the stove and the number of seasoning bottles.Overall, the selection and installation of the kitchen racks mainly pay attention to the following aspects:

1. Convenient and applicability: When installing the shelves, be sure to install the entire layout of the kitchen and the needs of our daily life. Commonly used, the installation location we need to use it at hand must be used.In other words, water is the place where we can reach for enough. We can install or place the vacant part of the kitchen.

2. Save space: Because the kitchen is relatively small in our family, the installation of the shelf must save space and use the location of our kitchen space reasonably, such as on the wall of the kitchen, the back of the kitchen door back, the back of the kitchen doorWaiting for these places.

3. The classification is clear: We must put them in a reasonable position according to their different categories when setting up the category of the kitchen.The drain can be installed next to the dishwashing tank. The knife rack can be installed on the corner of the stove. The seasoning rack is installed where it is closer to us.

How to use the kitchen storage rack for storage

The kitchen needs to use various utensils and items, such as kitchenware, tableware, condiments, etc., there are many types and quantities, and it is essential. Putting them at hand not only looks very messy, but not convenient to find it next time. At this time, the kitchen storageThe rack played a great role.The housewives can put these supplies in an orderly manner in the Storage rack to create a clean kitchen environment.

The shape of the kitchen shelf is usually three types: board, Hanging, and desktop.

Considering that the kitchen space is limited, most people still choose to hang the kitchen racks on the wall with a hanging type.

But it is not true that the placement of each Kitchen rack should be used as the principle of housewives.The following are some suggestions:

1. Place the drain of the soup plate to choose the plate type and place it by the pool for use at any time;

2. The knife rack should arrange a corner for it to avoid hurting yourself when you are busy;

3. The seasoning rack should be placed in a place near the wok so that the seasoning is convenient when cooking

5. There are some highly fixed tables installed in the kitchen. After putting various tablets and other tableware, there will be a feeling of waste of a high space. Then it is a good choice to use a Hanging small Storage rack.Reasonable use of the remaining three -dimensional space can be used to place various types of bottles and cans used for cooking, which is neat and convenient.

6. If the height of the table is not fixed, it doesn't matter. Choose a small multi -layer Storage rack to solve it.This kind of Storage rack occupies small space. Multi -layer space can store more items. The non -fixed placement method can freely adjust the position, which is very practical.

Generally, people think that it is difficult to clean up the kitchen, but it is unexpectedly simple if the purpose of "cooking".Pay attention to the kitchen storage: First, the minimal movement access; 2. The various sizes and shapes must be cleaned up;Tiring.Want to cook well and keep the distance between 2-3 steps between the "Refrigerator-cooking table-Storage rack".Putting things only need to reach out or step across.

Pay attention to things outside the kitchen. What often use should be placed in places that are easy to take, and things that are heavy should be placed below.Evolties should be avoided.

What cage is the best for rabbing rabbits

1. Single -layer rabric

rabbit cages are arranged at the same level.This rabbit cage breeding density is low, and the utilization rate of the house is low.But the ventilation is good, easy to manage, and good environmental sanitation.Suitable for breeding and breeding female rabbits.

2. Double -layer rabbit cage

Use a fixed bracket to assemble the two horizontal planes up and down of the rabbit cage.The breeding density is increased compared to a single -layer rabbit cage, which is convenient for management.

3. Multi -layer rabbit cage

The three or more layers of cages are arranged and arranged. The breeding density is large, the ventilation is not good, and the indoor hygiene is difficult to maintain.

4. Overlap rabbit cage

The upper and lower cages are completely overlapped, with inheritance plates between the layers, generally 2-3 layers.The rabbit house has a high utilization rate, and the unit area of the unit is high.However, the number of overlapping layers should not be too much, it is advisable to be 2-3.The ventilation and light in the house are poor, and the temperature and light of the upper and lower layers of the rabbit cage are uneven.

5. All -step rabbit cage

When the rabbit cage is arranged, the upper and lower cages are completely staggered, and the feces fall directly into the dung ditch under the cage, and there is no dung plate.The feeding density is high, the ventilation is well transmitted, and the observation is convenient.Because the layer is completely staggered, the vertical distance between the layers is large, and the management of the upper cage is inconvenient.At the same time, it is more difficult to clean up manure.Therefore, the full -step rabbit cage is most suitable for second -layer arrangement and mechanized operation.

6. Half -step rabbit cage

Part of the upper and lower rabbit cages overlap, and the inheritance plate is provided at the overlap.Because the vertical distance of the rabbit cage is shortened, the upper cage is easy to observe and manage.Compared with the full -step rabbit cage breeding density, the utilization rate of rabbit houses is high.It is a form in the middle of a full -step and overlapping rabbit cage, which can be manually operated and suitable for mechanized management.Therefore, it has certain practical value in my country.

How much is a rabbit cage

It depends on how big the rabbit cage, a few dollars, and more than a hundred or more.

What are the rabbit nests?

1. The cushion at the bottom of the cage

A clean cloth can be placed at the bottom (although someone is paved with a newspaper at the bottom, it is still recommended to use white newspapers or advertising paper without ink to avoid the toxicity of the rabbit because of the ink because of the bite of the newspaper.)(Ren), facilitate the owner to clean up the poop of the rabbit.

2, tableware

If you decide to eat feed for rabbits, you must prepare a bowl of food, and choose a little weight and heavy weight to prevent the rabbit from accidentally stepped on the edge and turn it over the bowl.The material is also as hard as possible to prevent rabbits from bite the food bowl and destroy it.

3. Drinking water heater

Some people say that rabbits cannot drink water, which is a bit unrealistic.It is important to prepare sufficient clean diet.General pet stores should buy such items.The reason why you choose a water heater instead of putting it directly because if the rabbit is active in the cage, you will definitely accidentally burn the water bowl. At that time, it will inevitably sprinkle the water on the rabbit., Also increase the chance of Skin diseases.

4. mask tools

The grinding Tool generally does not need to be placed in the cage at all times, and then let it bite when it is used.

rabbit cage installation

1. installation of a drinking heater:The automatic drinking water heater is installed on the back panel, and the water pipe is parallel outside the board (rabbits are grabbed, and the water pipes cannot be bitten).If a self -made drinking heater, it should be hung at the front door to facilitate the water level and timely replenishment.

2. installation of the ingredients:The ingredient box is best to make a plug -in.It can make the rabbit from getting out of the steel door when eating, and it is easy to add materials.You can also put the ingredients in the door, but keep a certain height to prevent rabbits from rabbits.

How to do the rabbit cage

Prepare the materials before making a rabbit nest. You can use bricks to give a nest near the corner to the rabbit. The rabbit's nest must be kept clean.Prepare four cement bricks, choose the side of the wall, set up a 40*50 ground nest, spread the side of the ground nest with the wood chips in the ground nest, leave the empty side of the cement brick to drill the rabbit into the drillOut, find a 60*60 floor brick on the ground nest, so that the ground nest can not blow everywhere.

rabbit cage cleaning and cleaning

1. Daily rabbit cage clean

(1) Take any unsatisted fresh food (fruits, vegetables, etc.) from the cage every day.Ideally, this is even twice a day, once in the morning, once in the evening.

(2) Rinse the food bowl.

(3) clean and re -filled the water bottle.The bottle brush will make this task easier.

2. rabbit cage clean every week

(1) Perform daily cleaning tasks.

(2) Take out all accessories and toys from the cage.Wash and clean it with water and detergent.

(3) Take it out of the cage and wash all the clothing beds.Replace the clean bedding.Each rabbit cage should have two sets of bedding/blankets to facilitate themselves.

(4) Wipe the cage with hot water and use vinegar to help remove stubborn urine deposits.If you have a smaller cage, you may need to remove it and rinse it with water in the bathtub or the outer hose outside.

What to do if the rabbit does not enter the nest

The bigger reason for the rabbit does not go to the nest to sleep because the rabbit does not think that the nest you bought for it is used to sleep, just like buying a new toilet and need to train it to learn to go to the toilet. The owner also needs to patiently guide the rabbit.The nest is used to sleep.We can try the following methods:

1. Use snacks to make bait

Put the snacks that the rabbit likes to eat in the nest, seduce the rabbit to eat inside, and do not give it snacks outside the nest. Over time, it will know that there can be snacks in it.

2. Massage assistance

After the rabbit drilled in, he touched his head and killed it. He felt comfortable with the rabbit. Every day, the rabbit knew that this could be lying on, and it was used for rest.

1. 8 categories of Outdoor leisure chairs

1. Arras

The collective name of the back chair with a handrail is called armchair except the circle chairs and chairs.Its style and decoration are simple and complicated. They often cooperate with the coffee table with the settings, and use four chairs and two to place them on both sides of the hall.

2. Massage chair

The principle of a massage chair is to imitate artificial massage, but it uses mechanical rolling power and mechanical power to squeeze for massage.The massage chair can use a variety of massage methods such as swinging, pressing, pinching, and rubbing along the spine according to the human curve.

3.

The lounge chair is one of the furniture with new styles and functional purposes that appeared in the Qing Dynasty. The end -stage craftsmanship and skills of Chinese feudal society have continued to improve. People pay more and more attention to the quality of life.New varieties like lounge chairs.There are many other nicknames in lounge chairs. "Before bed chair", "warm chair", "Xiaoyao chair", "spring chair", etc., are different titles for a certain type of lounge chair.The materials used in modern lounge can be: mahogany, bamboo, vine, aluminum alloy, etc.

4, shake chair

The rocking chair is a chair that can shake back and forth. The main material is rattan or wood or metal.The rocking chair is a special form of chair, which enhances the quality of life and increases the taste of life. It is one of the types of chairs that the elderly like.

5. Vine chair

Various chairs are made of bamboo, and vines are wrapped in various chairs.There are varieties such as vine chairs, vine chairs, and rattan chairs.The rattan chair is both breathable and elastic. It is best to choose a chair with back, and put a stool on the foot to make your legs flat and prevent the lower limbs from ischemia.

6. Transit chair

The upper part is not much different from the style of the general chair. However, there is a rotation part of the title "independent leg" under the seat. Therefore, the human body can rotate left and right at will.The age of the transfer chair is not too early. It is a chair that Chinese furniture absorbs foreign style earlier.

7. folding chair

folding chair has always been considered one of the most important furniture and a symbol of social status.In ancient civilization, the folding chair is not only for the seats for people, but also used in various formal occasions and rituals.The development of the folding chair began from about 2000 to 1500 BC. The initial folding chair was a special seat for the military commander on the battlefield, and it was also a symbol of power and prestige.Although the time is constantly pushing, the folding chair has always been symbolic.

8. Qiuqian chair

Qiuqian chairs are hand -woven with bamboo and vines. They use Hanging chairs, unique shapes, and bold ideas, so that those who see Qiuqian chairs want to sit up and try.Because hand -woven, the price is expensive, about 500 yuan to 600 yuan.

2. Dimensions of Outdoor leisure chairs at different occasions

1. The size of the casual chair in public places

casual chair in the community: 1.2-1.6*0.5*0.45 meters

Park casual chair: 1.6*0.8*0.7 meters

2. The size of the home Outdoor Leisure chair

Depending on the environmental environment, the size of the Outdoor Leisure chair of the furniture is different. The biggest is the courtyard Leisure chair, followed by open -air casual chairs, and balcony casual chairs. Outdoor Furniture should be coordinated with space size.

Size: 0.645*0.68*1.15 meters

Size: 0.66*0.57*0.97 meters

The above introduces the types and sizes of Outdoor leisure chairs in detail. You can choose the type of Outdoor Leisure chair that suits you according to different applications and living habits, while the size of the casual chair should be reasonably selected according to the size of the space to avoid excessive or too much too much or too much.Small.I hope the above can help friends who need to choose Outdoor leisure chairs.

Wall lamp daily cleaning method

1. The Wall lamp is easy to accumulate dust, and regular dust removal can be maintained to maintain good lighting effect.You can wipe it with a wet cloth, keep the action in the same direction, do not rub it back and forth, and the strength should be moderate.Turn off the Lights inside the cleaning light and remove the bulb.

2. Inside the Wall lights, when cleaning the bulb, first turn off the Lights, and you can remove the Light bulb and wipe it separately when wiping.If you clean it directly on the lamp, do not rotate the Light bulb in clockwise to avoid tightly peeling the lamp head.

How to clean different material wall lamps

1. Cloth lampshade

Wash the fabric lampshade with a soft brush, you can remove the fabric lampshade, and stick to the cleaning agent with a lower concentration on the soft brush, and then scrub the dust on the fabric lampshade. This method is not only simple, but also the wall lampshade.No damage.

2. fruits glass lampshade

Use a soft cloth suitable for cleaning the glass, be careful of the lampshade of the wall, or scrub it with a soft cloth dipped with a toothpaste. You can use a soft cloth to wrap chopsticks or toothpicks.

3. Resin lampshade

It can be cleaned with chemical fibrous tweezers or dedicated tweezers. After cleaning, anti -static spray should be sprayed, because the Wall lights of the resin material are prone to static electricity.

4. Fold lampshade

The fold lampshade Wall lamp can be scrubbed with a cotton swab dipped in water. If it is particularly dirty, a neutral cleaner can be used.

5. crystal beaded lampshade

crystal beaded wall lamps are delicate and exquisite, and clean is very troublesome.If the lampshade is made of crystal beads and metals, it can be cleaned directly with neutral detergent.After cleaning, dry the surface of the surface and let it dry naturally.

Wall lamp maintenance method

1. The wall installed on the wall is to pay attention to whether there is a water seepage to avoid the Wall lights from falling off.Do not frequently switch when used to avoid affecting the service life of the Wall lamp.

2. Frequent switching wall lamps will greatly reduce its service life, so try to reduce the switch of the lamp when using wall lamps.