The breeding method of Venus Catcher

1. Light: Flying Totics is full of light, and it takes at least 4 hours of direct light every day.The light time is insufficient, and the inner clip grows small, which may lead to the death of plants.If you lack the sun in winter, you can use a fill light.

2. Moisture: Try to use soft water such as pure water and rain. Watering with potting is more appropriate.

3. Humidity: The humidity of the breeding environment is large.You can use a large water plate to make waist water, or you can add layer of water moss to its surface soil.

4. Soil: Flying Tadao like acidic environment, the substrate is best to keep the acidity of PH3.5-5.Puts without adding Fertilizers and perlite (2: 1) or pure water moss are good matrix choices. The substrate is best to replace once every spring.

5. Temperature: The growth temperature is 15 35 , the most suitable temperature: 21 35 . If you want it to sleep, you can control the temperature to about 5 C (0-8 C).

6. Feeding: During the day, photosynthesis provides nutrients for the growth of flytrap. The insects you eat can also provide nutrients like fertilization. You can feed insects when breeding, but not too much, too frequent.It should be noted that chicken and beef are difficult to digest for them.

7. Fertilization: Put the Fertilizer directly into the matrix meetingAs a result, the death of the plant is extremely impossible to salt because the root system of insects.Fertilization should be sprayed with low concentration liquid Fertilizer on the leaves.

Venus's breeding method

1. Leaf insertion method: Flying Tottery grows strong in the late spring to early summer. Dig out the flytrap from the soil, connect the pest of the flytrap, and strip the petiole in the white petiole.Put the petiole on the cultivation medium, maintain high humidity and give sufficient light, and new buds will emerge after a few weeks.

2. Sub -method method: When the flooding tract grows out of the side buds, as long as it is large enough and has a complete root, it can be planted separately separately.

3. Flower bud method: Sometimes because of temperature difference, the flower catcher's flower buds will become a plant, and the temperature difference between day and night will induce the flower catturing flower buds into new plants.Get a new flytrap.

How to make homemade Outdoor folding tables

The outdoor folding table is light and portable, which is very suitable for outdoor activities. Now there are many Outdoor folding tables on the Internet. If you have a strong hands -on ability, you can also make an outdoor folding table yourself.Here are some ways to make several Outdoor folding tables:

Practice

1. Prepare the production materials and tools: wooden boards, electric diamonds, saws, tape measures, live pages hinges, nylon ropes, right corners, hammers, nails.

2. Cut the wooden board, use nails to set up a right -angle arched bracket with a nail, and insert a beam board at the middle height of the two standing feet of the bracket.

3. Make four shelf wooden frames, screw screws, and connect the shelf brackets through the live pages.

4. Drill the hole in the middle of the beam board. After entering the nylon rope, knots both ends of the rope head.

5. A pair of shelf desk brackets that are completed can usually be folded. When used, open a wooden board on it, which is a simple folding small table.

Two Practice

1. First make a small shelf in the rear.

2. Care on the desktop legs on both sides. Pay attention to the hollow and cut style of the table legs.

3. Fix the side plates of the table legs and the shelves with long hinges, and test whether it can be retracted freely.

4. Finally, the desktop and shelves beam are chain with long hinge (the reason why the side plate hinge is installed first and then installed the desktop to wrap the desktop legs).

Three

1. Saw wooden strips: 4 desk legs, 4 desktop support rods, 4 short fixed rods, and two long fixing rods (the thickness of two table legs is shorter than shorter).

2. The 4 tables legs are drilled at the intersection of the table you need, and the positions of the 4 holes should be consistent.

3. Drill the desk leg and the desktop support rod.The drill size is a little larger than the bolt.

4. Start assembled the desktop. First, use a short fixed rod with a short fixed rod and nail, and then nail the outer desktop legs and upper bolts.

5. When you put on the bolt, you will find that the bolt head of the table legs and the support rod protrudes, and the table legs cannot be merged. At this time, you need to use a large drill bit to drill out the holes and let the bolt head sink.

6. After installing the desktop, you will see that the top of the table's legs protrudes the support rod plane, so you must see the excess part, or you can't install the desktop.

7. Finally, fix the desktop with wooden screws to the desktop and complete.

Four

1. Prepare materials and tools: wooden boards, hammers, planers, and desktops are painted with paint -free ecological boards.

2. Seal the desktop edge, stick it with glue, knock gently, and press it tight.

3. The wooden strip line, planing flat, drilling, and then draw the thread, saw the position of the hoe, and punch.

4. Apply glue, then sting together, add wedge fixing.

5. The table legs and two windows can play a fixed role. One end of the table legs is connected to the desktop with a harmonious pages.

6. Add a wooden bar under the desktop to ensure that the table will not fall when the window support is not tightened.

7. Finally, brush the table legs with two layers of paint, which is convenient for cleaning in the future. A simple outdoor folding table is made.

Can charcoal remove formaldehyde?

Decoration will inevitably leave formaldehyde. For the sake of human health, you need to remove formaldehyde before check -in. There are many commonly used formaldehyde methods. The physical adsorption method is one of them. charcoal is one of the commonly used adsorption tools.

The reason why charcoal can be used to remove formaldehyde is mainly because it has adsorption effects. charcoal has a large amount of micropores and transition holes, so that it not only has a high ratio of surface area, but it will be very good after the cavity is excluded from the exclusion of the holes.Adsorption performance can adsorb indoor formaldehyde to remove formaldehyde.

2. Is the effect of charcoal adsorption of formaldehyde?

charcoal can be used to adsorb formaldehyde, but its dehumination effect is relatively general:

1. Ordinary charcoal has a certain adsorption effect, but its adsorption ability is unstable, and it is vulnerable to changes in the environment. It may absorb other substances. When reaching saturationEssence

2. There is a product in charcoal that is activated carbon. Its formaldehyde removal effect is better than ordinary charcoal, but the adsorption capacity of activated carbon is less adsorbed. Generally, it will be fully absorbed, and if there is too little, it will not work.

In general, charcoal can adsorb formaldehyde, but in many methods of removing formaldehyde, the effect of removing formaldehyde in charcoal is not particularly good. removing formaldehyde can still be ventilated by opening windows.

Third, how long is the charcoal removing formaldehyde to change again

charcoal uses adsorption to remove formaldehyde. When charcoal is filled, it needs to be replaced, otherwise it will release the formaldehyde inside. How often do the charcoal removed formaldehyde?

Generally, the replacement time of charcoal is related to the formaldehyde concentration of the house. The formaldehyde volatilization will be more powerful. It is recommended to change it once a week. If you change it, you can place it under the sun and reuse it.Consider change every 3-6 months.

1. How much do you need to store the Inflatable sofa

One of the advantages of Inflatable sofa is that it is easy to carry. When not in use, the gas is released, and then the folding is only one plastic bag size, which is very convenient. The method of storing inflatable sofas is as follows:

1. Find the inflatable mouth of the Inflatable sofa, open the inflatable mouth, and release the air inside.

2. After the gas in the Inflatable sofa is completely empty, fold the Inflatable sofa from beginning to end, or fix it with a rope or rubber band after curling up. Pay attention not to damage during the folding process.

3. Powder the folded inflatable sand in the coming storage bag or box, and then save it in a dry, moisture -proof and dust -proof environment.

During the storage process, pay attention to the storage after the gas is released. When storing, you should also avoid folding the Inflatable sofa too compact or bending, so as not to damage its structure.

2. How can the Inflatable sofa be air -to -air

Before the Inflatable sofa storage, the gas must be completely released, and some Inflatable sofa is slower. So what can be helpful to quickly release the gas?

The inflatable sand distributed gas is generally unwilling through the inflatable mouth. Some Inflatable sofa also has a special deflection mouth at the bottom of the sofa. After pulling out the air -deformed speed, it will become faster.Quickly air deflation: For example, using hand pressure or compressing the edge of the sofa can allow the air to flow quickly, but pay attention to avoid too much force, otherwise it may cause damage to the Inflatable sofa.

Bo Xue Wannian Grass, the perennial herb of Jingtianke Jingtian Tianshiplant, Guangbong South Europe to Central Asia.Native to Spain, also known as Komatsu.This species is afraid of heat and cold.The root is the root of the whisper, the stems grow, and the leaves are densely dense, blooming.

Morphology

root:Perennial herb is rooted.

stem:The stem stusum grows, and it is easy to grow under the ground.

leaf:The leaves are stick -shaped and the surface is covered with white wax powder.The leaves grow densely at the ends of the stem, and the lower leaves of the stem are easy to fall off.

flower:In the summer of flowering, the flowers are 5 petals, and the color is slightly pink.

Growth environment

The full sunlight can also grow in half -sunlight, but the leaves will be more loose, drought -tolerant, and rapid growth.Afraid of heat and cold, Taiwan's cultivation is not easy to bloom.

Main value

1. Potted viewing

The leaflets of this plant are rounded and slender, and the round leaf meat sticks are green and green. The whole form is small and exquisite, very cute.If you plant it, if you grow up healthy and have signs of explosive pots, at this time it is covered with layers like a pad layer. At the same time, because of the form of Bo Xue Wannian Cao, it is very suitable for other parts with others Multi -fleshy combined planting.As long as you design the location of the planting or adjust the micro -world you want to present in time, it will show you a magical micro forest.

2. Garden decoration

If you like to plant flowers and plants on the roof, you can plant it as a green plant in the garden of the roof.Because this plant is easy to grow dense, and it can cover the planting places in a large area, the growth rate is very fast, and it can also be able to carry violent light. It can grow in an environment without a small amount of water. Feel care to take care of it.As long as you plant it where you want green, it can explode the pot to cover the surface and bring you surprise.This kind of succulent -saving succulent is suitable for planting people who are lazy to take care of plants. The characteristics that can grow up healthy without need to take care of every day are suitable for people with no particularly much planting experience or people with no planting knowledge.

Cultivation technology

soil:Slightly dry and then watering can also adapt to an environment with higher humidity. The medium can use sandy loam soil or general cultivation soil, which can be resistant to barren; it does not have to be fertilized and grows for a long time; there will be a phenomenon that the base leaves fall off to make the stems exposed. Pruning and promoting the growth of branches again, the cut stems can be cut as a breeding material.

Watering:Bo Xue Wanwan Gao has drought to resist and dampness. As long as it is not long -term drought or long -term humidity, it can grow well, and you can water the water when the medium is slightly dry.In the case of long -term watering, the leaves will shrink significantly and are listless. At this time, as long as you water the water, it usually recovers in a few days.If the plant type is not compact and there are long suspicions, pay attention to increase the time of sunshine and reduce watering appropriately.

illumination:Except for the appropriate shade in midsummer, you can take all day.The plant type is loose, the leaves are not compact, and the color is lighter, which is the sign of insufficient light.

Temperature: When the temperature is 35 degrees in summer, it should be properly shaded to strengthen ventilation and control watering.The temperature in winter is lower than 5 C. Watering should be controlled. If it is low, it is necessary to consider moving into the room to overwinter, and try to choose the room of the sun.

Change of pots: Bo Xue Wannian Grass grows rapidly. Pay attention to timely branches that affect the beauty in time. When the growth is too dense, the basin should be performed to maintain the beauty of the plant type.Its fleshy stems are crispy and easy to break. Be careful when changing the pot to avoid breaking the longer branches and affect the ornamental effect.

Ventilation and slow seedlings:All succulents like ventilation, which can effectively avoid the breeding of germs.During the period of slowing the seedlings, you can use the moisture soil. Put the Bo Xue Wannian grass in the bright ventilation for a few days to gradually increase light and even full light.

summer and winter winter: When the temperature is higher than 35 C in summer, it should be properly shaded, ventilation, and watering.The temperature in winter is lower than 5 C. Watering should be controlled. If it is low, it is necessary to consider moving into the room to overwinter, and try to choose the room of the sun.

Management of maintenance points

It can be maintained in the Outdoor sunlight during the growing period. Do not shan out even if the high temperature seasons are high in summer, so that the plant type is compact and beautiful.Although it can also grow in the semi -yin, the plant type is loose and affects the ornamental.Insufficient light will cause the plant to grow long, making the distance between the leaves and leaves stretching, it looks rare and ugly, and the plant is weak, it is easy to cause black rot and other diseases, making the whole pot of plants rot, and the entire army is overwhelmed.

Keep the pot soil moist during the growth period, avoid stagnant water, and do not rain for a long time. These are to avoid plant rot.Due to its informal resistance, the requirements for fertilization during cultivation are not strict.Put in a place where the light is sufficient in winter, control the watering, and keep the soil without freezing.There are good ventilation in the summer high temperature seasons to avoid stuffy and humid environments, so as not to cause plant rot.

Bo Xue Wannian Grass grows rapidly. Pay attention to timely branches that affect the beauty in time. When it grows dense, the basin should be performed to maintain the beauty of the plant type.Its fleshy stems are crispy and easy to break. Be careful when changing the pot to avoid breaking the longer branches and affect the ornamental effect.

Usually green, the increase in sunshine time and huge temperature difference will turn the whole plant into pink, and the plant type will remain very beautiful.After the lack of light, the president is ugly. Long -term lack of light can easily cause pests and insect pests.

In general, Bo Xue Wannian Cao is a very good breed. There are also four points of flower buddy summarizing four points: 1. Dowls and ventilate; 2. Danning the sun; 3. Watering crazy; 4. Appropriate fertilization.

Breeding method

The reproduction of Bo Xue Wannian Grass can be combined with a basin for a division. The method is to separate cluster plants and plant them separately.Cuttings can also be carried out in the growth season. The length of cuttings is not strict, and the soil can take root.

Cutting method

1. Choose a strong Xuexue 10,000 -year -old glower plant, choose healthy branches for cutting, and ensure more than 10 centimeters in length.

2. Also pay attention to remove the leaflets above the bottom of the note. In order to prevent rotting in the soil during cuttings, it will affect the growth of the Bo Xue Wannian grass plant.

3. Put the cut -off of Bo Xue Wannian Grass Cut in a cool place for a day, ventilate and ventilate until it is dry.

4. Prepare the pot soil and prepare the soft tide soil. This is conducive to the cuttings of the cuttings.

5. After drying it, you must put it into the pot. Do nt be too dense when you put it on the basin. Bo Xue Wannian Grass is best to cut the cuttings separately. Do not pour too much water after cutting.

6. After the cuttings of Bo Xue Wanniannian, put it in places with light and good ventilation.

Parents of Bo Xue Wannian Cao Breeding

1. If you want it to show a compact state, you need to expose it to the sun, because its light resistance does not matter all day.

2. Pay attention to ventilation to effectively prevent it from getting sick.

3. When the temperature exceeds 35 degrees, it is necessary to cover it appropriately, and at the same time, it is necessary to strengthen the ventilation of the planting environment and reduce the amount of watering.If the temperature is low, put it indoors towards the sun.