1. What is bikini jeans

bikini jeans are a kind of jeans produced by Sanna s Brazil Fashion in Brazil.This pants perfectly combine bikini and jeans,Both can reflect jeansThe version can also reflect the sexy of bikini.The waist of jeans is lower, suitable for bold and avant -garde women.

On Kopakana Beach in the Brazilian capital, some avant -garde women wearing such jeans can be seen.In addition, you can occasionally see women wearing such jeans on the commercial streets of the United Kingdom.

Second, the maintenance method of bikini jeans

1. The best cleaning time for jeans is 6 to 12 months

General friends wear jeans for a week or have a little sweat (dirty) and put them into washing machines. In fact, this is fatal to jeans. It will make your jeans go in shape for a long time.There are closely comfortable and beautiful legs.

The correct method should be: as much as possible every 6-12 months. If you sweat a lot in summer, you can hang your jeans and ventilate places and spray some water to dry it so that the sweat smell on the jeans will not.Yes; if the jeans are stuck with some unclean things, you can spray water in the dirty places, then gently pick out the dirty things, and then hang it in a good ventilation place, it will be good to air dry naturally.

2. Do not dry or machine washing when cleaning for the first time

Everyone must have the impression: when the jeans are washed and dried, it must be hard when it is taken out. In addition to the reasons for using laundry powder, one reason is that there is a layer of glue on the tannin.Therefore, try not to wash or dry them with machines when cleaning for the first time. It is best to wear it on yourself. Washing jeans in this way will make jeans more in line with your leg shape, and the effect will be better.After cleaning, you still have to hang it up in a ventilated place, and it is air -dried naturally.

3. jeans must be treated before washing

Before washing, jeans must do some basic color preservation, otherwise jeans will be whitewashed soon.The coloring treatment is actually very simple. Put the jeans in a water basin before washing, then put two spoons of white vinegar or salt, soak for about half an hour, so that the denim pants will not be so serious after the processing of jeans.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

[Fighting Snow Battle Composition] Six articles of snow -Fighting snowball fights for snowballs, sample essay example

Article 1: Fighting snow battles

I saw a snowy world outside this morning.Seeing the good weather, I went to play downstairs with my mother.Seeing that there are a lot of snow here, I fight with my mother.

Our selection of snowball is: Each candidate piles a lot of snow, and then everyone takes some snow to roll into a small snowball.To hit the other party, when the other party is not there, you can take the opponent's snow. After being hit by the opponent's snowball three times, you have to stop 30 seconds in place.That Fang Xue lost.

At the beginning, I have a little advantage, because my mother's snow pile has been taken away by the left. When I was proud of me, my mother suddenly sent three snowballs, settled for 30 seconds, and waited for thirty seconds.In the past, I quickly saw that my mother didn't know where to get a lot of snow from. I saw that my snow pile was only a little left.This is my plan to start a big counterattack. I first took the three snowballs of the snow under my body and hit my mother.Here is a harmful to others to get the remaining snow and mother's snow piles on the ground.The final game ended with a tie.

This game tells me that as long as you have the determination to win, you can succeed.

Article 2: Fighting snow battles

On the third day, we were going to buy liver treasure, and suddenly snow came.

When I got off the car, the road was full of snow, and the sky rushed over to me. I grabbed a snow to Zong Hangyu and threw it. Zong Hangyu felt that someone was throwing her. The first goal was Luo Shiqi. SheThrowing to Luo Shiqi, Luo Shiqi saw Zong Hangyu throwing her, and she also grabbed a handful of snow and threw it to Zong Hangyu. As a result, she threw it to Chen Yizhuang. He was furious and threw it. Almost everyone was thrown by him!Just like this!Children who have not participated in come over!We walked while walking, and it was not until it was about to get in the car. The car started again. It was really endless. Then I will go!I threw it, I threw it, I threw it, but I won a lot of victory. Everyone was thrown by me more than twice. In the car, I heard that they were going to attack our boys. I told Chen Yanzhuang. He said that he saidDon't be afraid, those girls are too weak, and the two of us can treat them all girls!When they got out of the car, they threw us, and we threw them, one by one, and we threw them all the snow. Before getting in the car, their mother cleaned up the snow on them and then got on the car.They surrendered, and two boys in our area defeated many of them.

It's so fun to fight snow!

Article 3: Snowman

Today, it was snowing. The snow was as light as smoke and fluttering.The "goose hair" shakes densely, so beautiful.In the afternoon, the snow was much small, so I went to the courtyard to pile the snowman.

"Wow! It's so beautiful, it's a world of pink and jade!" I screamed happily.Unfortunately, a child did not come down today, I had to pile up the snowman alone!

I first squeezed a small ball, found a place where there was a lot of snow, and then rolled this snowball in the snow, so that the bigger, the bigger, the more they rolled.When I finally rolled up, I reinforced it with my hand.Until he is not soft.This body is done.

After a while, I piled my head in the same way.At this time, I have already become the authentic "Snowman".I looked at the snowman. At first glance, I quickly inserted their mouths, hands, and hats.The important thing is that the snowman's hat is made of snow!

I first rolled into a snowball like the rolling head.Then, turn around around the snowball to cut off the uneven places, which will make it longer and longer.In this way, it is successful!

My snowman is good, right?

Article 4: Snowman

This morning, I woke up and opened the curtains, ah!It's snowing.The roof was covered with thick quilts, the big trees were covered with white cotton jackets, and snow -white blankets were covered on the ground.

My mother and I hurriedly put on thick cotton clothes, gloves, greeted my partners, and took the iron puppet to the snow with interest to start the snowman.We first shoved a lot of snow with iron pupa, piled up a large snow pile, and patted it with hands, and the snowman's body was made.Then we squeezed a small snowball with our hands, and then rolled the small snowball on the thick snow back and forth, and soon we made a big and round snowman head.Then, put a blue barrel on the snowman's head as the snowman's hat, and took two buttons and a carrot as the eyes and nose of the snowman, made him a scarf with color paper, and then took two branches.Do his arm."Kung Fu is worthy of the people," our snowman finally made it.

My friends and I were very happy. Everyone pulled hands and sang songs. It turned around the snowman, as if we were letting go, the snow child would disappear.The snowman can bring us happiness and sense of accomplishment. I really hope that the snow children can cheer with us and sing together.

Article 5: Snowman

My favorite game is the snowman.I remember in the winter of the age of five, my father and I piled up a snowman at Er Ye's house.

I was stunned as soon as I opened the door that morning.I saw that the white was white between the heavens and the earth, and the snowflakes fell from the heavens, all around, like pulling a white Tent, and the ground became silver wrapped.I found a branch and tried it. My dad said at a glance: It's so big that it is so big, there are more than ten centimeters deep!So I went to the second grandfather's house with my father.We found iron , two branches, two small stones, and a small barrel.The first was to shovel some snow with iron pupa; rolled into a ball as the head, and then shovel some snow.The second is to draw the mouth, nose, orbital with your fingers, and then put the small stones into the eyes, and then insert the tree stalks on both sides.Finally, put the barrel on its head as a hat so that the snowman piled up.

The snowman looks very cute.It seemed to wear a dress made of diamonds, sparkling and crystal dazzling.His eyes were dark, with a sweet smile, like a snow elves.

However, this winter I want to pile a sheep. Because my brother is a horse, he used to pile a horse. I belong to a sheep, so I also have to pile a sheep.

In short, I like it whether it is a snowman or a sheep.

Skiboard brand & gt; & gt;

Article 6: Fighting snow battles

Whenever I hear: "Shake, shake, shake to Grandma Bridge." When this nursery rhyme, I remembered the snow Battle.

Once, when the snow was heavy, my classmate Zhao Hang piled up a big snowman downstairs. I went downstairs and said to him, "Let's fight snow! I hid behind your snowman, can you hide behind that door?Agree "Zhao Hang also quickly agreed, and we started to fight snowball!

I think it should be given a governance, so I threw a big snowball.But he didn't hit him but hit the door. He hit another hit and did not hit me. Instead, he hit the snowman's head and dropped his head.Then he threw a lot of snow on my head.This time I was anxious, and I made a large snowball and threw it in and hit his face all of a sudden, and then ran behind him.I was secretly discovered by his big eyes, and I saw a heavy snow rushed to me.Oh my god, this can not be avoided, and I was beaten with snow. I wanted to run back, but his snowball was faster, and he hit me at once!I had to move forward!At a glance, a large bowl was on the side. As soon as I reached out, I picked up the bowl and put it in the snow and threw it!Suddenly, he couldn't dodge and hit him.As he wiped the snow, I played one after another ...

I still can't forget this "Fighting".

Article 7: Revelation of Snow Battle

I have now spent ten happy and happy spring and autumn. In the past ten years, I have received a lot of inspiration from many things.

Last winter, a heavy snowfall was made, and I found three friends to play with snow battles together.We scratched the "Jiang" and were divided into both the enemy and us, and then launched a fierce Battle.In the process of playing snow battles, I found that the enemy was strong and weak. I think how good it would be if there was a defensive fortification. I immediately started the "snow wall" according to the defense I imagined. In the process of doing, my teammatesLi Dezheng said, "Don't do your defense work again, I can't hold it anymore." I said, "Keep it again, I will do it right away." I endured the pain of the bouncing, insisted on piled up thoroughlySnow wall.Kung Fu is worthy of care. I finally built the snow wall. My teammates and I hid behind the snow wall, calmly made snowballs, and then turned to each other.Under the protection of the snow wall, the other party couldn't smash us at all. We hit the other party to flow, and finally had to surrender.We are the victors of this snow Battle.

From this time to play snow battles, I understand the principle of "grinding knives without mistakes". Before you do it beforehand, you must first prepare for it, so that you will go smoothly and there will be no errors.

[Material of the lampshade] How to clean the lampshade what the material is good for different materials?

What is the material of the lampshade?

The lampshade, as the name suggests, is a kind of cover set on the bulb or outside the lamp flame. It has the effect of preventing wind and rain and concentration. It looks like a small lampshade.Formed, let Xiaobian take everyone to enjoy some good -looking lampshade pictures together, and deeply understand the manufacturing materials of the lampshade.

First of all, Xiaobian will introduce the first type of lampshade: milk white lampshade, milk white lampshade is divided into transparent PMMA color powder, transparent PC bonding, transparent PC matte powder, glass fluorescent powder, transparent PC light diffusers, transparent PC,The following is the detailed introduction of them:

1. Transparent PMMA color powder: The lampshade made of this material has a low cost of the material and a little transparent. It can be seen by the light source, but its light transmission rate is low, and the disadvantages of uneven light diffusion.

2. Transparent PC edges: The lampshade made of this material has a high mechanical strength and a good light transmission rate, but it will cause lithography and the effect of light diffusion.soft.

3. Transparent PC frosted powder: The lampshade made of transparent PC frosted powder can cover the lamp beads, so the light transmission rate will be greatly enhanced, but the fog is low, the light loss is very powerful, it will reach 40%, the diffusion of light will spread, and the diffusion of light will spread.The effect is average.

4. glass fluorescent powder: It has the characteristics of low cost and good conservation effect, but it is easy to break and it is not convenient to transport.

5. Transparent PC light diffusion agent: The light diffusion agent itself has the effect of softering the light. The use of the lampshade made by it will make the light of the light softer and the appearance is very beautiful, but its weather resistance will be resistant to, but its weather resistance will be resistant to, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will resist, but its weather resistance will be resistantGenerally, the degree of light loss is 30%.

The second type of lampshade: transparent lampshade. This lampshade mainly uses two materials: glass, PC and PMMA.

1. glass: The lampshade made of glass is very light transmitting. Basically there is no light loss. If the tile of the lamp is high, the light of the glass lampshade will be dazzling and easy to break.

2. PC and PMMA: The light transmission rate of the lampshade of this material is very high, and the light loss rate is small, but the diffusion light will be dazzling.

This kind of lampshade, the appearance of the appearance is very European -style furniture manufacturing style. The use of advanced steel to make the framework of the lampshade, which is not easy to deform, and then use transparent PC and scrub powder to make lampshades.In the form of petals, coupled with hand -drawn patterns, a strong sense of art.

How to clean different materials lampshade

Fold lampshade

Scrub with a cotton swab dipped in water.

crystal beaded lampshade

If the lampshade is made of crystal beads and metals, it can be directly cleaned with neutral detergent.If the crystal beading is put on, it is best not to wet the wire, and wipe it with a soft cloth dipped in a neutral detergent.

Fabric lampshade

You can use the vacuum cleaner to take away the surface dust, and then put a little furniture detergent or detergent on the rag.If the inside of the lampshade is paper material, it is best not to use liquid washing agents such as detergent, detergent, detergent to avoid erosion.

fruits glass lampshade

It can be wiped with soft cloth, and you can dip a little toothpaste to make cleaning more thoroughly. Toothpicks can be treated with uneven places.

Resin lantern

You can use a dedicated tweezer or chemical fiber to clean, and then spray the anti -static spray immediately to prevent static electricity.

1. What are the differences between Solar street lights and split body

According to different structures, Solar street lights can be divided into two types: integrated Solar street lights and split -type Solar street lights. They all use Solar -driven street lights, but there are differences in the following aspects:

1. Different components

The split Solar street light is composed of batteries, LED lamp heads, photovoltaic boards, controllers, and light rods. The lamp rod must be paired.The battery, LED lamp head, controller, and Solar panels of the integrated Solar street lights are together in the lamp head.

2. Different prices

Due to design reasons, the power and battery capacity of the integrated Solar street lights are generally small and the cost is generally lower and the cost is lower. Therefore, in the same specifications, integrated Solar street lights are much cheaper than scaled street lights.

3. The complexity of installation is different

The installation of integrated Solar street lights is more convenient. It can be installed with screws, while the split Solar street lights need to be assembled, wiring, installation of battery brackets, lamp heads, battery pits, etc., which are relatively complicated.

4. Different technical parameters

The technical parameters of the split Solar Lamp ranging from 10-80W, or even higher; integrated Solar street lights are generally 10W, 20W, 30W, 40W.

5. Different application scope

Communities, factory districts, industrial parks, and rural roads.

6. Different maintenance methods

There is a difficulty of solving the lamps. The split Solar street lamp needs to be sent to the local area to repair the local technicians to investigate the battery, photovoltaic board, LED lamp head, electric wire, etc.Just send it directly to the factory and send it to the manufacturer for repair.

Second, the Solar street light is one better or the split is better

Compared with the split Solar street lights, there are many differences compared to the integrated Solar street lights, so which one is better?

1. From aesthetic perspective

Generally speaking, the integrated Solar street lights look more compact and exquisite, and the split Solar street lights can easily give people a visual "pressure", beautiful atmosphere.

2. From the perspective of efficiency

Although the integrated Solar street lights are integrated together, which reduces visual pressure, it also limits some functions. For example, under the same conditions, the larger the area of the Solar panel, the greater its photoelectric conversion efficiency.

The split Solar street lights can be customized according to the requirements, while the integrated Solar street lights are not so free. It is also necessary to consider the space occupied by other components, so there is also some restrictions in efficiency.

3. From the perspective of security

The Solar street lights are installed outdoors. Some people who have an unraoped heart can easily hit it on it. Whether the split -type street light battery is buried underground or on the light rod, there is always a risk of being stolen.And integrated Solar street lights, if you want to steal the battery, you can only move the entire street light, this possibility is relatively small.

In general, the integrated and split Solar street lights have their own characteristics. There are no absolute differences. We can choose according to the actual requirements.

1. Heating pipe decoration

1. Hide

Hidden is to hide the water, heating, hood and other pipes such as some furniture or shape design.The upper and lower water pipes and gas pipes of the restaurant and kitchen can be designed as wall furniture, such as wine cabinets, wallcathers, corner cabinets, etc.;, Can design a set of Hanging cabinets, hiding the range hood and hoods in the Hanging cabinet.The top or first -layer housing often has a heating pipe through the indoor window, which can be hidden into the curtain box, so that the baffle of the curtain box covers all the pipes.Make full use of wall furniture or wall decoration to hide pipelines, which can not only hide the pipeline in the furniture, but also increase the storage space.

2. Smooth decoration

The decorative radiator pipeline does not have to be hidden, and it can also be beautified by using it to make some decorations.If the pipeline design can be painted with different colors to make it a creative shape; or the pipeline is wrapped around with plastic flowers and plants, and the pipeline is decorated as a trunk, which will produce a unique decorative effect.

3. Buried Tube

The buried Tube is to bury the buried pipelines under the surface layer through the decoration of the wall, the ground, and the top.Various bright lines such as wires and telephone cables can be used in the wall of the wall -buried lines on the wall. When the wiring, it is necessary to lay a dark Tube. Be careful not to bury the wire directly into the gray layer, because this is not only not conducive to the future replacement of the line replacement in the future.And it is also very unsafe.If it is slotted on the wall of the reinforced concrete, the machine should be cut with a machine, and an electric hammer should not be used. The electric hammer can easily loosen the wall around the buried groove and destroy the wall structure.All kinds of bright lines can also be buried offline through the gypsum line or skirting line around the top surface.

two,radiatorHow to decorate

In order to ensure that the home can have good heat dissipation and perfect decoration effects in the home, friends must consider the future use effect of the heating tablet in the designs of the heating tablet, but also consider the decoration effect.Avoid leaving any regrets in the decoration.

1. Hidden processing of Heating tablets -heating louver/heating cover

The display cabinet and the heating cover are combined with one.The general heating hood is determined according to the height and length of the heating itself. Although it is economical and practical, it is inevitable that they are the same.You may wish to create a simple and practical small display cabinet in the location of the heating, and keep the heating bag in the display cabinet, leave the maintenance door in front, and make it from the top of the display cabinet with glass and board.In this way, the heating cover not only beautified, but also made full use of the space.

The display cabinet and the heating hood are used to make heating shuttle with more wood in the past, which is beautiful, but it affects the heating heat dissipation. Many designers are distressed by this.However, if you use punching iron plates to make heating shutters/heating masks, you can make full use of the characteristics of good metal thermal conductivity, which can make the decoration and heating.

2. color treatment of radiators

The simpler and effective way is to brush the radiator with monochrome paint (such as white, light blue, etc.), and make a wooden shelves slightly wider than the radiator on the radiator. The thickness is about 40mm, the surfaceBrush the paint or mixed oil, put a bottle of flowers or a group of family photos on it, making people feel simple, warm, elegant, and romantic after watching.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;