1. Is the sunscreen jacket under the banana really sunscreen?

The sunscreen under the banana really has a sunscreen effect.Banana sunscreen jackets use technology sunscreen fabrics. This sunscreen can take care of a variety of parts at the same time, more comprehensive protection, can reach the UPF50, the sunscreen index is high, and the overall design of the clothes is also very humane.The sun sunscreen jacket has the following sunscreen advantages:

1. UV protection coefficient:The ultraviolet protection coefficient of the banana sunscreen jacket is UPF50, which is a relatively high sunscreen standard, which means that it can filter at least 98%of ultraviolet rays and effectively protect the human body from ultraviolet damage.

2MaterialTheBanana sunscreen jackets are 88%of nylon/nylon (polyamide fiber). This material has the characteristics of light, breathable, fast dry, wear -resistant and other characteristics, which can provide comfortable dressing and sunscreen effects.At the same time, this material also has a good anti -UV performance, which can effectively filter ultraviolet rays and protect the human body from ultraviolet damage.

3. Belly Sun protection, cooling and insulation:Bana sunscreen jackets use ice Sun protection and cooling heat insulation technology, which can bring cool and comfortable feeling to the wearer in the hot summer.Not only can it be insulated, reduce body heating, but also absorb sweat and breathable, and keep the body dry and comfortable.

Second, how to clean the sunscreen jacket under the banana

Banana sunscreen jacket has always been well received. It has its own patented technology and correct cleaning method to keep the sunscreen under the banana better sunscreen effect.The cleaning steps of sunscreen jackets under the banana are as follows:

1. Use a neutral detergent, and use the warm water of not more than 30 degrees. Soaking the clothes for not exceeding 5 minutes.

2. Use soft brush to brush the dirty parts of the clothes.

3. Rinse a lot of water, be sure to wash the detergent composition.

4. Do not screw your clothes and dry it directly in the natural environment, but avoid sunlight.

5. Do not iron it at high temperature, which is the same as the climbing bag.

6. Each washing will have some damage to the clothes to avoid frequent washing.

7. Under the guidance of professional personnel, regularly use professional waterproofing agents to repair and maintain the waterproof nature of clothing.Banana sunscreen products & gt; & gt;

Beneunder under the banana

Banana Holdings Co., Ltd.

• Place of origin: Hong Kong

Founded in 2013, it is an Outdoor brand of high -quality cities in China. At the same time, the banana is also a member of the Council of the International Skin Cancer Foundation.The word banana is taken from "Banana Leaf", which represents the needs of young women consumers for Outdoor sunscreen.In 2013, the banana opened an Outdoor exploration journey with an umbrella, and gradually looked at the daily Outdoor needs.By balanced and practical strong functions and designs that satisfy experience, everyone can enjoy sunlight and healing.Under bananas, focus on exploring beautiful Outdoor life with you.Since its establishment nine years, Banana has always adhered to the R & D 50%UPF 50+ fabrics and products that can effectively block more than 95%of UVA/UVB rays, providing people with strong Sun protection protection, and based on this ... More ... More ... More ... More ... More ... More ... More ... More ... More ... More ... More ... More ... More ... More ... More ... More ... More ... More ... More ... More ... More ... More ... More ... More ...& gt;

What affects the price of chemical Fertilizers to affect chemical value value -added tax on Compound fertilizer prices

With the approval of the State Council, the Ministry of Finance, the General Administration of Customs, and the State Administration of Taxation issued the "Notice on the Recovery of the Following VAT" (Cai Tax [2015] No. 90), which stipulates that from September 1, 2015, the taxpayer is required to the taxpayerThe sales and imported chemical Fertilizers are uniformly levied VAT at the 13%tax rate.The calm Fertilizer market is no longer calm. This heavy news has become the most concerned topic in the Fertilizer industry.After the recovery of the value -added tax of chemical Fertilizers, what will change the price and market of compound Fertilizers?

Effect on Compound fertilizer prices

Effect on the price of Compound fertilizer raw materials

Taking the Shandong and its surrounding areas as an example, the complete cost of the traditional tobacco -free coal process is about 1,600 yuan (ton price, the same below).There is no "value -added" problem here.However, the complete cost of the aerospace powder gas gas -chemical technology Urea is around 1350 yuan. According to the above assumptions, the value -added tax is about 10 yuan. If it is passed on to the downstream, the price increase is limited.It is understood that more value -added taxes that can be credited by Urea manufacturers, so the recovery of value -added taxes should have a small impact on the current Urea market.

Taking the Hubei region as an example, 55%powder -shaped one ammonium general export price is 2100 yuan, and the full cost is about 1950 yuan. It is necessary to pay a value -added tax of about 20 yuan.Yuan, received a value -added tax of about 26 yuan.According to some dizen ammonium companies, if the profit remains unchanged, it is expected that the price of ammonium phosphate should rise by 50-100 yuan, and the increase will be about three %.Therefore, the recovery of VAT's recovery has little effect on the price of ammonium phosphate.

The most increased cost of Potassium fertilizer and the most impact is Potassium fertilizer. Due to the lack of input deductions, the value -added tax will increase its cost significantly, which will cause the sales price of potassium Fertilizers to increase significantly.The cost per ton of potassium chloride is at least 150-180 yuan/ton.

Impact on the cost of Compound fertilizer:

Recently, raw materials Urea and ammonium phosphate are temporarily in a state of weak operation, and even the price is still falling. Even if Compound fertilizer value -added tax is recovered, the two shall have a large impact on their costs.It is concluded that if the cost of Potassium fertilizer increased by 258 yuan/ton or even more due to the reasons for the recovery of VAT in the later period, the cost of 45%chlorolyl and sulfur -based Compound fertilizer was increased by at least about 64 yuan/ton per ton.Therefore, after September 1st, the quotes of Compound fertilizer may increase, but according to the different situations of each enterprise, the price increase should be different., Large profit, more value -added taxes, and relatively high cost of small enterprise raw materials, small profits, and relatively small value -added tax, but the difference should not be too large.There are also factors that some companies are not optimistic about the market, or limited downstream acceptance, etc., and expressed their concerns that they would increase their own digestion.Therefore, the increase in the quotation of Compound fertilizer after September 1 may determine the price trend of potassium Fertilizers mainly. At the same time, it is necessary to pay close attention to whether the state -deductible policy and the value -added tax in import and export are new.

After the first round of the autumn fat in early August, it can be seen that the enthusiasm of the downstream dealers' payment and picking up the goods is not good, and this year's crops are low, farmers have poor enthusiasm for planting Wheat, and the mood of watching is strong. Before September 1st, September 1stThere are still a lot of market demand space.Once the news of the value -added tax news on August 10 is implemented, all aspects of the Fertilizer industry will be affected. If the price of raw materials is raised, the production cost of Compound fertilizer manufacturers will increase.Once the news is released, this will undoubtedly make the current weakness of the fat market in autumn improve, and the psychological psychology of downstream buying up and not buying and falling will reappear again. At the same time, in mid -to -late August, the demand for Fertilizer preparation in the second round of autumn is released again.The "good market" will come in advance, and in order to avoid the increase in the later period of tax costs, some manufacturers will inevitably introduce some offers such as picking up subsidies to stimulate downstream active pick -ups and strive to minimize corporate Compound fertilizer products and raw materials.Inventory, so before September 1, the peak of Wheat Fertilizer sales will come early.However, before September 1st, the demand for Fertilizer preparation of the downstream Wheat market will basically be met. After September, the market demand has only a small amount of replenishment space.It is very large. It may have a certain degree of impact on the overall price of Compound fertilizer when the fed Fertilizer demand is launched on the occasion of the tail sweeping of the tail cleaning in autumn. At that time, the overall price consolidation will become the main theme of each enterprise.In the long run, it is inevitable that the return of the Fertilizer industry to the market is inevitable. The resumption of value -added tax on the recovery of value -added tax indicates the determination of the government's simplified administration and decentralization of power and regulating the development of the industry with the market.The problem is controlled, and the backward production capacity of small business scale and poor performance will face the elimination situation. The industry leaders with standardized operation and good performance will be favorable in terms of market and resources.Although there are more profits in the short term, in the long run, while the reform brings challenges, opportunities must be with them. Grasping opportunities and innovation optimization in reforms are the foundation of development.

Common faults and solutions of GPS navigation instruments

1. The machine is not turned on

(1) Do not use it for a long time, do not turn on.It may be that the battery is written and protected. The connection is connected to the charger. You can turn on it. If you still can't turn on the power, please shorten the battery bipolar!

(2) The machine is not turned on (non -artificially damaged).At the beginning, you can try to press the "reset key" to revitalize the machine. If it is not good, it is likely that the machine drops the program, and the other is the key failure of the opening.

2. Click on the screen with sound but the function is useless

When the machine is used, the touch screen is not responded or inaccurate. Try to calibrate. In addition, it is likely to be the quality of the touch screen. The lines are loose. This situation occurs in winter.Chip, this problem can only be solved by the manufacturer.

3. After booting, I have been staying in the system and cannot be included in the system

One is long time, chip aging, procedure lost, and heavy brushing program.One is human operating errors, brushing the master program, and the system program in the memory by mistake when the map is upgraded. You can only brush the corresponding system software. Do not blindly brush the machine system file.brick.

4. GPS navigation cannot receive satellite signals

(1) It is useless for a long time, which causes not to search for stars.First of all, enter the map to initialize GPS, or not to accept stars, it must be the GPS module loose fake welding.

(2) You cannot find a signal or a signal for a long time.Needless to say, the GPS antenna is aging and return to the factory.

5. GPS terminal can search for satellites but cannot locate

(1) In terms of software, the map upgrade port is not modified. The download port testing software is tested, or the map owner program is not configured correctly.Some machines need to use a special version map, and a special version must be equipped.Use the GPS star search emulator with the machine itself to determine whether the hardware problem is.

(2) In terms of hardware, the machine has been exposed to the sun for a long time or works at high temperature (the machine will generate heat when working, and it is quite hot for a long time) causes the machine, GPS module, antenna to accelerate the aging, or burn directly, resulting in not searching for search.The signal or only one or two stars.

6. GPS terminal cannot recognize the memory card

(1) Software: Based on the old machine before, it does not support SD cards of more than 2G. Everyone trys to patch a patch (the system is very small).

(2) Hardware: First determine whether there is a problem with the SD card, and then check whether the SD card slot has foreign bodies, and then consider whether the card slot is damaged.

7. How to flash the machine to update the machine system version

Many G friends, I want to toss the machine and refresh the system version. First of all, we must understand the machine scheme, motherboard model and parameters (enter the settings -system information), write system information by hand, or use hand to determine the system information, or to use the system information, orScreenshots, then contact dealers or manufacturers to update the software.If you are looking online, you must pay attention to whether it is consistent with the motherboard. Do not brush it randomly, otherwise you will change your bricks.

8.GPS screen reaction is slow

There are two types of screen reactions in general GPS: there will be two types of slow -screen reactions: there will be two types:

1. The screen is damaged by the sharp object.

2. Degrees of screen recognition.

Simple judgment and solution:

To identify the reason for the slow response of the screen, you can choose to enter the place name in your search destination.If the words in the handwritten box are always intermittent, it is difficult to be coherent, and even divided into multiple parts.Then the touch screen is likely to be damaged by sharp objects.Generally, this situation will only appear when it is more than half a year, and there is no solution.The key is the usual use and maintenance.When input, choose a handwriting pen with GPS, and try not to use the screen or toothpicks with sharp things for a long time as alternative with your fingertips.

9.The suction cup of GPS bracket is easy to loosen, and the back clip is easy to break

In the GPS accessories, the bracket is the most prone to problems, especially the suction cup and the back clip.Many car owners report that the quality of the bracket's suction cup is too poor, completely sticky, and the road conditions have fallen slightly; the back clips are also very easy to break, and it will break.

Simple judgment and solution:

In fact, the phenomenon of loosening the suction cup generally occurs after a period of use. When the circular glue part of the suction cup is entered due to the air, the gap is left out of the vacuum part.fall.Frequent paste and extraction can also reduce the attachment function of the suction cup.The owner can wipe the front windshield and navigation bracket suction cups to reduce the gap left in the vacuum part.If the loose time is too frequent, GPS brackets should be replaced to avoid hidden safety hazards.

The back clip is broken, which is more caused by human factors.The unfairly demolition method of the owner makes the back clip that is not sturdy more easily broken.When removing, pay more attention to the direction of the back clip. Unfortunately, you can really be broken. You can buy universal brackets for replacement.

10.GPS cannot use the vehicle power supply

Under normal circumstances, GPS's battery life is about 1-2 hours, so when long-distance driving, vehicle power is needed.However, some car owners found that the prompts are always not bright whenever they use the vehicle power supply.After the inspection, it was found that the fuse of the original cigarette heater was burned, so the external power supply could not be used.At this time, the owner often believes that the quality of the car power supply of the GPS is too poor, but after multiple replacement, the situation is still.

In fact, the reason for the unable to use the vehicle power supply by GPS is not exactly caused by the quality of the vehicle power supply. Some of the reasons are caused by the design of the cigarette lighter.

Simple judgment and solution:

The owner can first observe which interface of his GPS vehicle power supply belongs to which one shows the following figure. When the A -type plug is plugged out, the fuse will occur, while the B plug will not happen.The owner can replace the vehicle power supply of the B plug.

For car owners who use the car plugs using A interface, if you do not want to change the vehicle power supply, you can insert it after starting the car and before the fire off the fire to prevent instant high -voltage burning.If you think this method is troublesome, you can choose to make a simple transformation of the cigarette lighter in the car.The metal piece above the cigarette jack is flat (red standard), so that the GPS cannot use the vehicle power supply.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

13 small tricks of sneakers demented

1 In the evening, use cotton dipped alcohol treatment method. Before going to bed every night, use cotton cloth to dip a little alcohol, and evenly apply it in the sneakers just taken off. After drying the next morning, wear it.It is to use cotton with alcohol to be placed in sports shoes. Use the volatility of alcohol to take away the odor in the sports shoes. After two weeks of persistence, the shoes will not smell.

2 2. Press a few sanitary balls into powder, sprinkle it in the clean shoes, and then put a insole, so that it is not easy to smell the feet when wearing it. The sanitary ball powder is very effective in except for sports shoes.

3 , Use the camphor pill to remove the smell of shoes, take a piece of hard paper, wrap the camphor pill, find a Tool to crush it, sprinkle the camphor pill powder evenly in the shoes, put the insole on it, a pair of shoes only about one camphor pillThat's fine.In this way, it can be kept dry in the shoes, the smell of the shoes will disappear, and the effect is good.

4 , Work hard on the socks, choose a pair 100% The cotton socks, using the strong sweat absorption of cotton socks can also make your sneakers not smelly. Of course, remember to change the socks every day and clean it.

5 You can buy alum powder from the Pharmacy, pour some alum powder into the shoes, and can also achieve the effect of deodorizing.

6 Use charcoal extraction technology to dry the remaining charcoal after drying in the shoes for ten to fifteen minutes, then wipe the inside clean, and place it in a cool place to ventilate and ventilate.It can also solve such problems of sneakers stinky.

7 , Put the preservatives in the snack (many puffed foods and dried fruit packaging, a small white bag, which reads it) directly in the shoes, it absorbs the odor in the shoes.Note: It is used at a time. For example, take off the shoes and put it inside, and throw it away when wearing shoes the next morning.

8 2. Put the lime powder into a small cloth bag every night before going to bed, and put it in the shoes to absorb moisture.The limestone bag can also kill the germs in the shoe, which can play a certain degree of removal of shoes and can be used repeatedly.

9 Use gauze to wrap some dry tea leaves and plug into the sneakers, which has the functions of clean, disinfected and volatile smell.Drink the leftovers, dry it, put it on the sand cloth after drying (( Or stockings that do not wear Cure Inside, put in the shoes, and also have the effect of deodorizing.

10 Use white vinegar to go to the stink, socks are also easy to smell. Pour a little white vinegar in the water washing socks, soak it for a while, and then wash it with water. This will not only remove the odor, but also play a role in sterilizing.

11 If your shoes are generally not worn in the shoe cabinet, you can put a piece of soap in the shoe cabinet to achieve the effect of deodorizing.

12 , For internal wet shoes.shoes should be placed in a ventilated place, or the shoes are completely dried with a hair dryer. If there is no time, you can use the door to remove the deodorant of the shoe odor and spray it in the shoe.

13 How to eliminate the sweat odor in the shoes: People with sweat feet often feel humid and uncomfortable when we wear shoes. The shoes you pass through will always have moisture and sweat odor. If you are troubled by drying, you will be affected by the weather.Use a good shoe care machine to quickly remove the moisture and odor in the shoes. After the care, the shoes will become dry and fresh.During the rainy weather, the shoes were wet by water, and it was not dry for several days. It can use good quality shoe care aircraft to dry the shoes, which is very convenient.

Generally speaking, sneakers are easy to smell gas after wearing it for a long time. Therefore, it is recommended to change sports shoes frequently and pay attention to ventilation. Good hygiene habits can also make your sneakers wear more lasting.The most important thing is to ensure personal hygiene. Wash your feet every day and keep your feet clean. Change your socks every day. The insoles should be cleaned and replaced frequently, so as to truly deodorize.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

Advantages of automatic inflatable beds

1. The volume of the automatic inflatable bed is small and the weight is light. The volume after the air is as large as the volume of the general house sheets. It can be folded and put in the Backpack.

2. The automatic inflatable bed has the function of anti -wetting, which is equivalent to moisture -proof pads. Therefore, when opening the bed, there is no need for a bed frame. You can sleep directly on the ground.

3. For friends who work abroad and often move, the automatic inflatable bed can not only reduce their burdens, but also save some space for bedrooms.

4. The automatic inflatable bed is suitable for family guest beds and temporary bed opening, which is not only convenient to save money

5. You can also use automatic inflatable beds when you are Camping, swimming, temporarily resting after work or exercise, and nagging.

How to use an automatic inflatable bed

1. Preliminary use:

When using an automatic gas bed for the first time, first spread out the air cushion, open the air mouth, and automatically expand the air cushion bed. After to a certain extent, turn off the air -cushion bed, then press the air cushion bed repeatedly.The air cushion bed automatically expands, so that the automatic inflatable bed is completely restored to elasticity and shape.

2, inflatable method:

Spread the air cushion and open the air mouth. At this time, the automatic inflatable bed will automatically expand, and then wait until the air cushion bed is swollen, and then tighten the air's mouth. Pay attention to adjust the air pressure to control the comfort of the automatic inflatable bed.

Note: If the automatic inflatable bed belongs to the long -term rolling state, please use the mouth to swell several times to restore it to elasticity.

3. The method of exhausting:

1) Open the automatic inflatable bed gas mouth, roll up from the other end of the air mouth, and press the air;

2) Turn off the air mouth, roll the air cushion bed from the other end, and open the air mouth to discharge the residual air again.

3) Finally, close the valve, and the automatic inflatable bed can be saved at any time.

4) Note: When carrying an automatic inflatable bed, please place the outer bag to avoid being scratched by automatic inflatable bed.

4. storage method:

Spread the air cushion, open the gas mouth, and store it in the cool drying office: put it on the bottom of the bed or behind the sofa, because the sponge of the air cushion bed has a memory shape, which can quickly swell into the most commonly used shape.

5. Repair method:

1) Confirm where the air leakage is confirmed: After blowing the gas swelling, turn the valve, use water or rare soapy water to wet the surface, fold it into half, press the knee to press weight to press weight.Make a mark.

2) Small hole repair: completely dry the air cushion bed, leak out the air, and drip the doses on the hole.Because the air is exhausted, the follow -up agent will be inhaled and seal the hole.Then wait for the follow -up dosage.

3) Special damage repair: The air cushion bed is completely dry and discouraged, apply glue on the repair of the cloth, the cave on the surface of the air cushion bed is also applied, dried for 30 seconds to 3 minutes (depending on the temperature of the temperature).Placed, flattened, and keep it for 4 hours to use.

6. clean automatic inflatable bed:

Expand the automatic inflatable bed to the maximum limit, close the valve tightly, and use soft brush and low -irritating home -sculpting detergent or washing agent. After washing in the bathtub, it is completely scrub with water.good.

What should you pay attention to when using Outdoor exhaust cushion

1) Do not approach the sharp things (thorns or pointed stones or blades).

2) When not using a Tent, do the bottom of the bottom under the air cushion bed.

3) Do not use it as a floating glute.

4) Stay away from flames or sparks.

5) When the temperature is high, do not swell and close the air cushion bed in the car or Tent.

6) Do not stick to sun oil or alkaline drugs.

7) Do not expose to the sun for a long time, the ultraviolet rays will slowly damage its surface material.

8) Please be placed where the pet cannot be touched.

9) The gas mouth is harder, and it should be avoided when resting.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;