1. Method of duck palm wood

1. Light: Duck palm wood should accept 4 to 5 light hours a day, and indoor maintenance is placed in places with scattered light or semi -yin.It cannot be in an environment with too strong light for a long time, and scorching spots will appear on the leaves, and even the leaves will become yellow.In winter, it can be maintained at all sun.If you grow in an too cool environment, the leaves will become yellow.

2. Soil: Duck palm wood cannot grow in the alkaline soil that is sticky. I like loose, breathable, fertile micro -acid sandy soil. The method of soil can be mixed with 5 pieces of peat soil and 3 parts of rotten soil.A small amount of cake Fertilizer is added as base Fertilizer.

3. Fertilizer: Duck palm wood Fertilizer is mainly in the growth period of April to September. It is applied to thin Fertilizer once a month. Fertilizers choose Compound fertilizer or cake Fertilizer of nitrogen, phosphorus, potassium.However, it cannot be used too much, which will cause the spots of flower and leaf duck to disappear green; during the dormant period, it must be stopped, otherwise the root system cannot absorb Fertilizer and cause damage and affect the healthy development of the plant.

4. Watering: Duck palm wood is moist and drought, so it is better to raise.When the soil is found to be dry, you need to water the water immediately, so be careful not to water too much.spring and autumn, water 1 or 2 times a week.It is hot in summer, and it is usually poured once a day to keep the soil slightly wet.winter grows slowly, poured water once every 5 to 7 days.Spray the water fog on the leaves regularly to increase the air humidity and make the leaves green and bright.

5. Pruning: Duck palm wood during the seedling stage can be trimmed off as long as the dense branches and leaves and the cluttered branches and leaves are trimmed; pruning during the germination period in spring, the main topics are carried out.Inhibit the height of the plant type, and promote the germination of the new buds of the side branches; according to the growth of the plant, the dense and cluttered branches and leaves will be cut in time to avoid affecting photosynthesis and breathing growth.

2. precautions for breeding of duck palm wood

1. When the summer light is too strong, it is necessary to keep it in a ventilated and cool place to avoid strong light exposure.

2. During the winter maintenance, the temperature is controlled in an environment with above 5 C.If the temperature is lower than 0 C, frostbite will occur.

3. Pay attention to opening the window frequently to keep the indoor air circulation, which is conducive to the strong growth of the plant, and it can also avoid the occurrence of pests and insect pests.

Third, cuttings of duck palm wood

1. It is recommended that you choose the two -year -old duck palm wood, choose a strong growing branch for cuttings, first cut it with scissors, and keep the obtained branches at the top leaves.

2. DuckPalmPut the wooden strip in the plastic bottle loaded with water for soaking. Pay attention to soaking in a cool vent and ventilated place. You can also put a little root powder in the plastic bottle, which helps take root as soon as possible.

3. After more than a month of soaking, the duckPalmWood usually takes root. At this time, you can carefully plant the branches of germination of germination into the Flower pot. After a while, the duckPalmMu will grow new leaves, which means that the cuttings are successful.

Fourth, the cuttings of duck palm wood are more appropriate

When the duck palm wood is cutting and breeding, it is best to keep the temperature at 15-25 C, so cuttings are best in spring in spring, and the south can be carried out in April.Cutting should avoid cool summer and severe winter. These two extreme seasons are not suitable for the growth of branches.When cutting, pay attention that the matrix should be clean enough, and there must be no eggs in it.

1. How to play Surfboards

1.

Looking up, holding your chest, and eyesight, your hands are padded along the sides of the surfboard, and your hands are scratched from the forefront to the end. Please pay attention to your hands and fingers together together. According to personal weight and the size of the surfing board, you need to adjust your position on the surfing board, and your toes are close to the edge of the board. During the stroke, you can dialect the water along the two sides of the plate, adjust the breathing rhythm, one left and right, and do not open your arms when paddling. This will greatly reduce the efficiency of water paddling.

Drawing is the most basic technique of surfing. Most exercises should be placed on this. The quality of your paddling will depends on whether you can catch the waves.

2. Get up

When the waves come, you are successful, and when you feel your surfing board pushed forward and feel the speed is accelerating, we start to get up.Find your ribs in your palm, and then flatten on both sides of your ribs to support your body.

3. Take the ride

When the speed is fast, you can "get rid of".His arm is pushing up and holding your body.Jump to the surfing board, keep your feet width with the shoulders and straight spine.The knee is slightly bent to absorb some bumps, so that you can stand on the surfing board more stable.

2. What are the precautions for the use of surfing boards

1. Pay attention to the place where the surfing board is carried. When placed on the ground, put it lightly and when the wind is strong, put on the sand on the sand on the surfboard to avoid being blown away by the wind.

2. When the surfing board is rushed back to the shore from the outside of the sea about 30 cm, please immediately go down to avoid the surfing board directly impacts the stone.There will be a lot of coral rocks near the shore near the shallow water area of the sea, and when there is a certain depth of water when it is rushed to the water, do not use your own abdomen to shoot the water on the water. This will increase the force area.Side towards water or back to the water.

3. When the surfing board and the waves are impact, do not use your hands to pull the safety foot rope and surfboard, so as not to be strained.

4. When surfing, please keep the length of the two Surfboards at the sea.

Do you want to cover the quilt in a sleeping bag?

It depends on the specific situation of the baby's sleeping in a sleeping bag to sleep.When normally used Sleeping bags, there is a certain gap between it and the Skin, the breathability is normal, and it is not very uncomfortable.However, if a layer of quilt is covered on the sleeping bag, the weight of the quilt itself will cause the gap in the sleeping bag to become very small, so that the sleeping bag will become sultry, which will affect the normal breathable function of the sleeping bag.Therefore, it is a better choice to not cover the quilt when the temperature is appropriate.Let me briefly introduce, in different cases, do you want to cover the baby:

1. Look at the thickness of Sleeping bags

(1) If the parents choose to have a thickened dwarn sleeping bag in the winter type when buying a sleeping bag. Usually, the baby has warm clothes inside, and the outside sleeping bag can be used as a quilt. Basically, there is no need to cover the quilt.Unless the baby's physical fitness is not good, when you are afraid of cold, you may need to cover a thin quilt.

(2) If the parents sleep in the spring and autumn that the parents are used to sleep in the spring and autumn, then if the baby wore a sleeping bag, it is best to cover a quilt to prevent the baby from catching a cold.

2. Look at the indoor temperature

(1) The conditions at home are good. The room where the baby sleeps is generally equipped with air conditioners. Parents can raise the air conditioner temperature and set it at about 25 degrees, so that the baby does not need to cover the quilt when he wore a sleeping bag to sleep.In addition, the northern family does not need to cover the quilt, so as not to cover the baby, but cause a cold.

(2) There is no heating facility at home. The temperature of the baby sleeping in the room is low. At about 10 degrees, it is recommended that parents remember to cover the quilt before the baby sleeps, and if it is not to see if the baby has a kicking quilt kicking the quilt,To prevent the baby's quilt from being stuck well, the body is cold and causes a cold.

3. Seeing the baby's sleeping habit

(1) If the baby usually wore a sleeping bag to sleep, parents will cover the quilt to the baby. It is best to maintain the original habit. Do not suddenly withdraw the quilt. OtherwiseIn the past, spring came, and when the temperature began to rise, mothers would gradually remove the quilt.

(2) If your baby usually wore a sleeping bag to sleep and keep warm enough, parents did not cover the baby at the beginning.It is easy to cause a sudden sense of oppression and overheating, but affects the baby's sleep quality.

How to use Baby sleeping bag correctly

1. If the baby does not turn over, he will kick the quilt with both feet.Raise your hands while sleeping, bend your legs and knees outward, and need to change the diapers frequently.At this time, a loose sleeping bag should be used. Do not restrace your baby.Such as gourd, envelope, etc.

2. If the baby has more movement during sleep and turn over.After turning over one or two times, the quilt is pressed under the body. You can use clothes, envelope Sleeping bags to prevent your baby from getting cold in your sleep.

3. If the baby has learned to use Sleeping bags and quilts, start to consciously control the physical activity when sleeping.At this time, you can use a sleeping bag or Sleeve with a sense of restraint.Began to cultivate children's sleep habits to lay the foundation for the future use of quilts.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. How much is a pound of konjac seeds?

The price of konjac seeds is about4~6A pound around the yuan, but there are differences in different prices such as the quality, variety, origin and market of seeds.In fact, the "seed" of konjac is not the seeds of botanicals. The formation process is very special. The "seeds" of konjac "seeds" with sexual reproduction are a typical non -sex organs -small spherical, seed first and second generationDifferent prices, the price of different places is different, and the price is large.

2. Where can I sell konjac seeds

There are farmers' markets or seed stores.

Konjac is cold, Xin, toxic; can promote blood circulation and stasis, detoxify and swelling, wide intestines and laxatives, phlegm and softness; Indications to lower blood pressure, blood sugar, phlegm nucleus, damage and bleach, stasis, stomach pain, sore throat pain, gums, gums, gums, gums, gums, gums, gums, gums, gums, gums, gums, gums, gums, gums, gums, gumsSymptoms and other symptoms.In addition, konjac has the effects of calcium supplementation, balanced salt, clean stomach, intestines, detoxification and other effects.

The grape glycosan with the largest content in the konjac has a strong expansion power, and has more than any kind of plant glue.You can fill the gastrointestinal and intestines to eliminate hunger, and because the heat it contains is minimal, it can control weight and achieve the purpose of weight loss and bodybuilding.

Konjac contains a gel -like chemical, which has the magical magic of anti -cancer and cancer.As long as the mature konjac is separated by simply extraction, it is made into a konjac fine powder, and the fine powder is added to the water, and the konjac gel can be produced.After being eaten into the body, this gel can form a translucent film coat, which is attached to the intestinal wall, which hinders various harmful substances, especially the absorption of carcinogens."Anti -Cancer Demon Cloth".

Konjac also contains a natural antibacterialin, which uses konjac fine powder as the main raw material. After making foods with other raw materials, konjac can form antibacterial membranes on the surface of the food, which can prevent bacterial invasion, extend the storage time, and play fresh and anti -bacterial bacteria.effect.

Third, the cultivation of konjac

1Soil: Konjac requires deep soil layers, loose and fertile, and neutral sour sandy loam planting rich in organic matter and humus.pH (pHAlkaliCurefor6.5~7.5GenerallypH5.5~6.5orpH7.5~8Both can grow.

2Humanity: Konjac requires good soil drainage, low groundwater level, and soil water content50~65%The sandy loam, the relative humidity of the air55~70%The annual rainfall is1000~1500Millimeter.

3, Temperature: Mochia fertility requirement for temperature15~25, exceed35growth is suppressed, lower than12The upper part of the ground is naturally poured, and the dormant period can be patient-5, lower than-8The lump of the ground is frozen.

4Light: Konjac is a shade -resistant crop. It is most afraid of light and direct shooting. It requires that the sunshine intensity is weak, the time is short, and the most suitable light intensity developed on the ground is sunlight.1/3The root development requires dark light.

Fourth, how to plant konjac seeds

1Following land fertilization: After the konjac is selected, the land is deeply cultivated once in autumn and winter. When farming, it can be combined with farming home Fertilizer according to the actual situation.1Mi Baogou,15~25centimeter.

2Plant taro selection: Select the seeds of konjac seeds to choose a small and shallow barogy nest, full ball stems, thick top buds, and the upper part of the tuber1The traces of the circle or falling off the roots of the beard, the lower and the bottom surface and the bottom surface, no root, no wrinkles, no scars, no injuries, weight is in300Gramm.

3, Plant taro disinfection: Monaco seeds should be used before sowing1000The agricultural chain -soluble powder of the units of 10,000 units to the water20kilogram(1000ppm)Soaked taro0.5~1Take it out and dry it after hours1~2God, this can reduce the occurrence of diseases.

4planting time: Konjac seeds are generally treated10Cm earthen temperature stable12Sowing only above , according to the climate of various places, it is usually in various places3It is advisable to be from the beginning of the month to late April, and it can be planted before the winter at the latest.

52. Sowing method: When the konjac is planted, the two lines of adjacent rows should be staggered and placed.45In the diagonal gap, the slope is budding upwards, and the taro is the root -shaped stem. The top buds are continuously placed in one direction, and then covered with soil.

Five, the planting management of konjac

1Cover management: After the konjac is broadcast, it should be vigorously collected by various crops, horn, shells, dead leaves and other coverage to meet the standard of "grass can not be made, and the ground is not exposed".2000About a catty,9After the month, pay attention to removing unwroded covers.

2Clear weeds: The root of the konjac roots is shallow. In order to prevent the young and tender root system and underground stems that are developing in the middle of the cultivation, it will affect the normal growth of the plants. You can use manual removal of weeds.On the surface, to prevent pressure from underground root stems.

3Clear ditch to cultivate soil: Konjac is afraid of drought and should not be impregnated. Therefore, the planting fields should be checked in the ground after the rainy season, especially after heavy rain, and drainage water to ensure that the water roads are Smooth.Combined with the Qing ditch, the fine soil inside the ditch is cultivated into the ridge surface.

4Scientific Fertilizer: Monacon topdressing is mainly to apply rotten dung water when leaf exhibition leaves. You can also apply dried pork dung slag to the soil to absorb the roots of the konjac roots between the plants.Following pursuit, Compound fertilizer with insufficient bottom Fertilizer.

Six, the diseased and insect prevention of konjac

1soft rotten

[Symptoms] Affects petioles, ball stems and leaves. After the victim, it tissue black, softened, and emitting a smelly odor, and even the fruits were rotten and inverted.

[Prevention] Strengthen the management of cultivation, regularly cultivate rectification, drainage and ventilation. When choosing seeds, carefully select non -rotten, wound -free taro, and soak the agricultural linolentin solution of appropriate proportion before sowing.

2White silk disease

[Symptoms] Affects the base of the petiole, which will cause damage to the petiole or ball stem.

[Prevention] Strengthen management and timely eliminate stagnant water, do not connect with peanuts, eggplant and soybeans, and use the proportion of Bordeaux liquid to switch to the spray of the petiole and the soil surface when the konjac fluid is switched to the bulb's stem expansion.disinfect.

3Leaf blight

[Symptoms] Harmly leaves, the infection ability of the germs is extremely strong, causing the konjac to wither and die.

[Prevention] The prevention and governance measures of leaf blight are basically the same as soft rot.

4Pest

[Symptoms] The insect pests that affect the growth of konjac are mainly Sweet potato moths, konjac lineworms, and bean moths.

[Prevention and treatment] Remove weeds and dead leaves during winter and spring, use konjac and corn for field sets. It can also use artificial insecticides to remove insect pests, and pay attention to choosing rotten farmhouse Fertilizer when using farmhouse Fertilizer.

2. After spreading it, use both hands to lift the Tent up

Step 2: One shake and press, immediately shake the Tent and let it open, and then press the head of the top Tent, and the Tent will hold up.

3. The jittering Tent is easily supported and adjusted

4. Press the Tent account pole down and fix it down

Step 3: One tie and one tie, that is, nails, tie the wind rope, and the Tent is built.

5. Adjust the size of the Tent and nail

6. Tie and pull the wind and wind rope (after seeing), fixed and stable

Second, the storage of automatic tents

Step 1: Lift it with a solution, that is, the head of the Tent is lifted to lift the fixed head, unbutton the security buckle on the bracket, and fold the Tent.

1. First raise the head of the pole up and lift the fixing

2. Ding the bracket safely and unlock it, and fold gently inward

3. storage: Unlock outward, unlock the vacancies when there is a vacancy

4. Unlock the eight security buckles on the bracket rod (two in one pole)

Step 2: Press and one fold, that is, hold the bracket with both hands and press the bracket to reduce the Tent, and fold the four corners of the bracket inward in order. After the folding, the Tent is stored.

5. Press and hold the sides of the bracket pole, press down inward and down, shrink the Tent

6. Fold the four corners of the bracket inward

7. Fold the four corners of the bracket inward and move closer to the center of the bracket

8. After folding, the Tent is closer to the center of the bracket, and the storage is good

3. How to press the schematic diagram of the Tent stent

In fact, the construction of the automatic Tent largely depends on how to use the bracket correctly. When the Tent is built, the bracket is pressed down and kept pressing to the end.

When storing the Tent, the bracket is lifted up, and the Tent is lifted together.

Today, automatic tents are widely used in family gatherings, friends outings, self -driving Camping, Picnic leisure, etc.To some extent, automatic building tents is not just a Tent, but also an advanced attitude towards life. A comfortable lifestyle. Take your automatic Tent to enjoy life outdoors!