Is the invisible bed practical?
1. Wall bed
The home chooses the design method of the wall bed, that is, hiding the bed into the wall.The back of the bed needs to be consistent with the color and patterns of the wall. It is folded into the bed during the day, and there is no bed here.
There is no shortage of cabinets in each bedroom. This design that puts the bed in the cabinet is suitable for the family with fewer rooms.Usually it looks like a cabinet, with a large area of space. Here you work and study here will not be attracted by the softness and comfort of the bed.You can pull out a bed from the cabinet at night, and the small room can also enjoy the comfort of the spacious bed body.
The combination of sofas and beds is suitable for small houses in the bedroom and living room function. There is no extra space to separate the sofa and bed. Why not consider the two into one.As a sofa during the day, you can rest comfortably and receive friends and relatives who are visited.Putting the second bed in the evening becomes a big bed, which is comfortable and convenient.
Advantages of Invisible bed
1. Comfortable choice
Some people will also combine the cabinet or wardrobe with it. When needed, the part of the bed is turned down and put it on a suitable bed suite.Measure the standard, so sleep on it like sleeping on the normal bed, but slightly lower than ordinary beds.
2. Save space
Save a lot of area for the entire living room, especially some small room types, or families who often have friends to meet overnight. Of course, there are many ways to invisible beds.bookcase, when needed, turn it down, and the practicality is very high.
What are the disadvantages of invisible bed
Although there are many advantages of invisible beds, there are small defects. For example, long -term use or flipping to the foot of the bed and springs will have fatal damage, and it greatly reduces the service life of the invisible bed. Therefore, in order to ensure its long -term onesThe service life should be as careful when turning, avoiding too much force to cause a certain degree of damage to it.
What is the size of invisible bed installation?
1. Side of the side wall Hanging bed
The side Wall cabinet bed is divided into single and double. Generally, the single -person single bed of the side Wall cabinet is 1.5m*2.1m; the double bed of the side Wall cabinet is 1.8m*2.3m.The usual size of the invisible bed is 1.0m*1.9m, a hidden bed in the wardrobe, 6200mm*600mm*2650mm, and a wardrobe with invisible bed 2.02m*2.65m.
The size of the living room stealth bed is 1.5m*2.1m, and the double bed is 1.8m*2.3m.The bedside of the living room invisible bed is also calculated, because the size of the bedside of different styles is different, and you must buy according to your preferences.
What should I pay attention to in the invisible bed installation
First of all, before the installation of invisible overtopes, you must first read the instruction manual.At the same time, you need to pay attention to the following:
1. It is strictly forbidden for children to operate and prevent injuries;
2. During the operation process, beware of the bed leg to the fingers;
3. Check whether the size of the cabinet should be checked before the installation of invisible overturn;
4. installation of invisible overtopes must be hooked, and it is necessary to pay attention to whether to lock when it is not used to ensure safety.
1. If you want to install an invisible overturn, you must install the cabinet first
Fix the cabinet on the wall with a large angle code. When fixed the cabinet, you need to ensure that the two large codes need to be on the same level, avoiding the insufficiency of large angle codes affect the firmness of the cabinet;
Install the block, the block is used to close the invisible bed closed, and place the block in the middle of the cabinet's top plate for 18mm, just to close the invisible bed.
2. Install the connecting board
Use the impact drill according to 145mm at the bottom of the distance.
Install invisible overturn bed ribs, extend the horizontal sheets into the installed invisible flipping bed cabinet, insert the shaft into the reserved connecting plate sales;
After inserting the sales holes of the connector, the hexagonal screw in the m6x10 is locked up in the direction of the shown in the figure.
3. installation of invisible overturn bed frames follow -up
Put the connecting rod into the outer thread axis in the connection board, and the M8 anti -loose nut is locked (twisted with the hand or the appropriate small wrench until it cannot be rotated);
Install the implicit overturn bed leg, place the bed frame at the horizontal position, rotate the bed legs out, and insert the guide rod near the outermost position of the guide rail tank. At this time
7-2, insert the guide rod and insert the opening on the guide rod after the guide rod, and fix it with your hands;
Turn the bed rack to the vertical position to observe whether the bed leg will scrape the top plate of the cabinet.
4. After turning the bed rack, install the pneumatic spring small head on the connecting plate shaft, and lock the M6X10 cross head screw with a screwdriver
Turn the bed rack down to the other end of the air spring until the big head can be successfully put into the sheets, and tighten the M6x10 cross head screw with a screwdriver;
installation of the panel. According to the reserved size, use the ST4X15 self -attack screw to fix the 6 adjustment angle codes on the panel. After 9 fixed adjustment angle code, the M6x30 cross -headed screw is spin on the 6 adjustment angle codes.
Install the position of the hand code on the other side of the panel installation and adjust the handle. The position of the hand -pulling hand is based on the size of the cabinet.
Push the panel tightly into the pair corner code, and let the 6 adjustment angle codes hook on the bed rack to hang the panel on the bed rack;
The adjustment angle code of the original installation is fixed in the back of the other intermediate adjustment angle code, and the interval between the horizontal rod between the bed frame is 15-20mm.
6. First press the bed rack down to the pneumatic spring and remove it. Hold the bed rack slowly to the vertical position, observe the bite between the panel and the cabinet.
If there is a situation where the panel is high and low, the upper left and the lower left and the lower left are small, further adjustment needs to be adjusted.If the panel is not flat, rotate the M6x30 cross -headed screw on the corner code, adjust the panel and the cabinet to match the gap to make the panel and the cabinet uniformly; use a screwdriver to rotate the screw (M6x30) to flatten the panel.
7. The last step of installing the panel
Use a screwdriver to fix ST3X40 self -attack screws on the bed frame;
Make the bed barbar port, and then tighten the M8 hexagonal nut with a wrench;
Use a bundle cloth to put into the ribs first, then put it in the Mattress, and tie them together;
Align the block position and install the hook lock.
Is the above practical for the invisible bed?What are the advantages and disadvantages of invisible beds, how to install the invisible flip bed, etc. in detail questions. In general, the invisible bed is still very suitable for small apartment families, which can effectively save space.There are faults, so when we buy invisible beds, we must choose a regular bedding brand. Such invisible bed products are generally good, and the large brands have a complete after -sales system and after -sales service to make the use process more comfortable.
Special Mic 
