Profile

San tail sunflower, also known as yellow coconut, purple sunflower, palm, and loose -tailed sunflower belongs to evergreen shrubs or small trees.The stems are Smooth, yellow -green, no burrs, waxing powder when tender, obvious leaf marks, and pattern.The leaves are Smooth and slender, feather -like compound leaves, full cracks, 40-150 cm long, petiole slightly bent, and soft apex.Sexuality is warm, humid, semi -shade, and good ventilation, afraid of cold, weak cold resistance, young tree pots for interior decoration.

Madagascar, which is native to Africa, now has many cultivation in tropical areas in the world.It is currently cultivated in some garden units in southern my country.In addition, Sanwei Aoi has related treatment effects on vomiting hemoptysis, blood in the stool, and leakage.

Nickname

Yellow coconut, purple sun

Morphology

San tail sunflowers are clustered shrubs, 2-5 meters high, 4-5 cm thick stems, and the base expands slightly.Leaf feather-like cracks, flat exhibitions and slightly bending, about 1.5 meters long, 40-60 pairs of feathers, 2 columns, yellow-green, waxy white powder on the surface, lanceolate, 35-50 cm long, 1.2-2 width, 1.2-2-2For centimeters, the apex is long tail -shaped and has a short -length short 2 cracks.And slightly expanded, usually yellow -green, which was waxed white powder at first, with vertical grooves.

The inflorescence was born under the leaf sheath, with a conical inflorescence, about 0.8 meters long, with 2-3 times, and the branches of the branches are 20-30 cm long.; Small flowers, ovisical, golden yellow, spiral -shaped on the small ear shaft; 3 tablets and petals each, with stripes on it, stamens 6, how much flower medicine;, A room room 1, with short flower pillars and thick stigma.

The fruit is slightly gyro-shaped or ovate, with a length of about 1.5-1.8 cm, 0.8-1 cm in diameter. When it is fresh, it is yellow, purple and black, Smooth outer fruit Skin, and mesh fiber.The seeds are slightly ovate, the embryo is uniform, and there are narrow cavity in the center.Flower period in May, August.

Suitable place

In the courtyard in tropical areas, mostly viewing trees are planted in grass, shade, and houses. The northern region is mainly used for potted plants, which are high -end potted leaves in the living room, restaurant, conference room, family room, study room, bedroom or balcony.plant.You can watch it for a long time in the bright room; you can also watch continuously for 4-6 weeks in a darkest room.

Effectiveness and role

Viewing value

Sanjian-tailed sunflower leaf feather-like lanceolate, soft apex, chic and beautiful posture, sexuality resistance, placed in a bright room for a long time to watch and watch, can be placed continuously in a darker environment for 4-6 weeks, which is deep.The popular high -end ornamental plant has a high value of ornamental.

Remove harmful substances

Sanjieki is a small palm plant that can resist harmful gases such as sulfur dioxide, HF, and mercury vapor, and has strong absorption of chlorine and sulfur.After home decoration, there will be indoor pollution in different degrees of indoor. Several pots of green plants will be placed to absorb these pollutants as nutrients and release fresh oxygen.Placing loose tails in the home can effectively remove volatile harmful substances such as benzene, trichlorohyinne, formaldehyde, etc. in the air.

Family decoration

San Tail Aoi is the best partner of gorgeous style. It has gorgeous and beautiful appearance and excellent connotation of shade resistance.The best partner of the American style and French style home is the lazy atmosphere of San Tail Aoi, which is perfectly matched with the beautiful American and French style decoration.

Of course, Sanwei Aoi, as a plant with strong elegance and anti -staining capabilities, is more appropriate to place the home financial position. Putting on the financial position at home helps to make money.

increase air humidity

Sanjiefui has the function of evaporating the water. If you plant a loose tail sunflower in your home, you can keep the indoor humidity at 40%to 60%, especially in winter. When the indoor humidity is low, it can effectively improve the indoor humidity.Natural humidifier in the home.

Medicinal value

Sanwei Aoi can also be used as medicine. It has the effect of convergence and hemostatic, which can treat vomiting hemorrhage, blood, and leakage.

Breeding method

illumination

Sanjieki is warm, and the most suitable growth temperature is 20-35 C.If it exceeds 35 C or lower than 10 C, the cultivation management is slightly improper, and its leaf will become yellow from green.It should be shaded in summer, and it is the most taboo to shoot directly. Even in a short period of time, it will cause the leaves to be brilliant, which is difficult to recover.In winter, it is necessary to do a good job of warming and freezing. Generally, it can be safer to overwinter at about 10 C. If the temperature is too low, the leaves will be yellow, the leaf tip is dry, and the root causes damage and affects the growth of the coming year.It likes semi -yin, and shade should be shaded by 50%in spring, summer, and autumn.The indoor cultivation and ornamental should be placed in a strong scattered light; it can also resist the dark environment, but it must be regularly moved to the better maintenance of Outdoor light to benefit recovery and maintain a high ornamental state.

Humidity/watering

Watering should follow the principles of dry and wetness according to the seasons. The dry and hot season should be properly poured in appropriately, and the water is controlled at low temperature and rain.In the northern region, especially the water contains salt and alkali in the water, it should be paid attention to regulating soil acid with black alum.Usually keep pot soil wet.In the high temperature period of summer and autumn, there must be a high air humidity around the plants, but the pot water is not available, so as not to cause rotten roots.

temperature

Sanjieki is native to tropical regions and likes high temperature environment. It has strict requirements on winter temperature. When it grows slowly when it is lower than 10 C, it starts to enter a semi -dormant or dormant state;In summer, it can be endured when the temperature is as high as 35 C, but growth will be temporarily hindered.The most suitable growth temperature is 18-30 C.

soil

The indoor potted loose tail sunflower should choose a sore soil, and the north should pay attention to the choice of sandy loam soil with high humus content.Rotal leaf soil, peat soil plus 1/3 river sand and some base Fertilizer can be made into cultivation soil.It is relatively deeper than the original planting when it grows on the rhizomes.From May to October, it is a period of vigorous growth and must provide sufficient conditions for water and Fertilizer.

Fertilize

Generally, rotten liquid Fertilizer or Compound fertilizer is applied every 1-2 weeks to promote the vigorous growth of the plants and thick leaves. In the summer, it appropriately applies nitrogen-containing Organic fertilizer. Organic flower Fertilizers such as sesame sauce residue can be applied in winter while maintaining the dry and wetness of the pot soil.

prune

As a looseflower cultivated by cutting leaves, after 2 years of continuous leaf collection, the plants must be comprehensively recovered and necessary for equipment maintenance.It is mainly to maintain the lighting equipment, because as the plant continues to grow, the Shading equipment cannot meet the requirements of the growth of the plant. In the typhoon season, it is easy to break the shade net.The second is the resurgence of the plant.Because of the obvious growth advantage of the trunk, it affects the growth of side buds and causes production to decline. There are also continuous division of plants, which makes the plant type too large, resulting in insufficient growth space, insufficient light, and unable to keep up, which eventually reduces the quality of the leaves.The measures are to comprehensively rehabilitate the plants and deserve the inferiority, mainly to see the excessively high and excessive trunks saw it at 30-40 cm away from the soil, cut some sick and weak branches;The large ones can be implemented, leaving 6-10 strong branches and re-planted, cultivating soil, and pouring roots.

Pelvic

Put the divided plants in the 1500 times liquid of Bacteria for five minutes and take out the cold drying.You can also use Bacteria to clear the roots immediately after the basin.Management after the division: After the part is installed with the root or pour water through the water.3-43-4The steaming of the leaves is not affected. In order to maintain the water balance of the blades, you need to spray the leaf surface for 1-3 times a day and do not fertilize it.After the division, pay attention to the sunlight, it is best to keep it in the shade shed.

Transplant

When the small seedlings are pelpned, first put a 2-3 cm thick thick-grained substrate on the bottom of the pot as a water filter layer. It is sprinkled with a full layer of rotten Organic fertilizer as the base Fertilizer, which is about 1-2 cm.A thin layer of matrix, about 1-2 cm thick, and then put in the plant to separate the Fertilizer from the root system to avoid burning.

The substrate used in the pot can be selected below: vegetable garden soil: slag = 3: 1; or garden soil: medium rough river sand: sawdust (Ru slab) = 4: 1: 2;One in the leaf soil.After the basin is finished, pour the water once and keep it in the shade environment for a week.When the small seedlings are transplanted, first dig the planting acupoint and sprinkle a layer of Organic fertilizer at the bottom of the planting acupoint as the bottom Fertilizer (base Fertilizer), which is about 4-6 cm.The root system is separated to avoid burning.After putting in the seedlings, fill the soil back, cover the root system, and step on the soil with your feet, and pour the water once.

Frequently problem handling

Breeding method

Sanjiefishi can be sowed and split breeding.seeds used for sowing and reproduction are mostly imported from outside China.Generally, potted plants are mostly propagated by sections.

Division

Sub -breeding can be used all year round.Around April, combined with the pots of pots, selected a lot of plants, removed some old pot soil, and divided them into clusters from the base connection into a number of clusters from the base connection.Each clump should not be too small, there are 2-3 plants, and the root system must be kept; the initial planted plants have not yet developed because the root system has not developed, and it should be avoided in strong light.Water in appropriate amount, spray water on the leaves several times a day, keep the leaves moist.Conservation at 20-25 , restore the formation faster.Generally, it can become potted goods for 1-2 years.Otherwise, it will grow slowly after the division and affect the viewing.Planted in a higher humid temperature environment and often spray water to resume growth.

sowing

Those who can get seeds, wash the harvested fruit, soak the seeds in warm water at 35 C for two days and sow.With germination and transplant.Sprinkle water on sunny days.Generally, the growth of young age grows slowly and grows rapidly after the age.

Prevention and treatment of pests and insect pests

Leaf blight

San tail sunflower blight is a common disease caused by fungal infection. It has a great impact on the growth of loose tails. Those who are light will dry the leaves, and the severe cases will cause the entire plant to die.The symptoms, the laws of onset and prevention and treatment methods of the onset, the laws of onset and prevention are now introduced as follows:

1. Symptoms of the disease were first invaded the tip of the leaf and the edge of the leaf. In the early stages of the onset, the infection was brown or strip -shaped plaques. The medium -term spot or plaques gradually expanded and connected to each other. Later, the leaves were gray white and dry.

2. The disease causes pathogenic germs to overwinter on the diseased or soil, and spreads with the wind, rain, and spray watering by conidia, and the germs invade from the plant wound.High temperature, high humidity and dense ventilation environment is susceptible to this disease.

3. To strengthen the disease examination of the prevention and treatment method, do not introduce diseases with diseases; strengthen ventilation, avoid rain and spray during the onset; cut the victims and leaves in time to prevent continued immersion, and the wounds are applied to Dakanin ointment for treatment; if there is a disease, if there is a disease,A 70%methyltotobadin 800 liquid or 75%mobilizer clear 1000 times liquid can occur, sprayed once every 7-10 days, and sprayed 3 to 4 times in a row, which can effectively control the condition.

Sanjieki can evaporate a liter of water every day, which is the best natural "humidifier".In addition, its green palm leaves have a very effective purification effect on dysine and formaldehyde.Frequent water spraying water can not only keep them green green, but also clean the pores of the leaf surface.

Blade dry

The main reasons for the dry coke during the growth period of the leaf leaf and the leaf edge of the loose tail, the main reasons:

The air is too dry.Sanjieki is highly humid in air, and when the air is too dry, it will cause the scorched and coke edges of the blades.Spray water to the leaves and surrounding environments 3-4 times a day to increase the humidity of the air every day and the surrounding environment.But watering should be stopped after dormant.

Excessive sunshine.Sanjieki is like a half-from from May to September. When the sun is directly radiated, the leaves will be yellow, coke, and coke.During this period, it should be placed under the shade or a big tree to avoid direct sunlight.

The pot soil is too dry.During the growth period, Sanwei Kwai needs to provide sufficient water.When the potting soil is dry for a long time, because the plant's growth is not required, the tip of the leaf and the edge of the leaf will be dry.

Pot soil is too wet.It is not as long as there is water in the pot soil, the plant can be absorbed and utilized.When the pot soil is too wet, it affects the breathing effect of the plant root, which affects the absorption of water in the root system, and causes the scorching and coke edge of the leaves in the plant in the plant.

Excessive fertilization.Excessive fertilization will cause the reverse osmosis of plant root cells and cause the plant to lose water. When the degree of lightness is mild, it will lead to the coke and coke edge of the blades. In severe cases, rotten roots will be caused.

Stop growing at 10 C and enter the dormant period.When below 6 C, you need to move into the indoor cold prevention and warmth, and the room temperature must be kept above 8 C.After being moved into the room, you should place it in a lighting place. If the room is equipped with air conditioners such as air conditioners, you should stay away.Otherwise, the leaves and leaves are easily burnt.When the weather turns warmer or it occurs, do not easily move out of the sun or rain, so as not to suffer from "cold" after being cold.When the room temperature appears high temperature above 20-25 C, the doors and windows should be turned on to adjust the temperature and heat and cool down.If the room temperature is too high and sweltering, some leaves will also cause yellowing and falling off.

Citrus and Shield

Features of harm: 1-2 generations occur in 1 year.Adults, nymphs are attached to leaves, petiole sucking juice, affecting plant growth.

Prevention method: When a small amount of insect body is found, it should be scraped in time.When the incidence is large, spray a 50%liquid of 800 times the liquid of gel sulfur.Spray 2-3 times for 2-3 times.

Family care method

1. Soil selection: The sudden drainage must be well drained by the breeding loose tail sunflower. It is best to use soil with more organic matter content.Potted plants can be made with humus or peat soil plus 1/3 of river sand or perlite with a small amount of base Fertilizer.

2,Fertilization management: In order to facilitate the better absorbing Fertilizer of the new buds, try to deepen as much as possible during cultivation.From May to June of each year for the peak growth season, Fertilizer should be applied once every 1 to 2 weeks, and fertilization is stopped after late autumn.Symptoms of loose -tailed sunflower: The color of the leaves fades from uniform thick green to yellow, and the growth rate of the plant slows down; the symptoms of potassium deficiency: The old leaves are dried from green to bronze or orange, and even the leaves are curled, but the petiole remains normal growth, but the petiole still grows normally.With the intensification of potassium deficiency, the entire crown faded, the plant growth was blocked or even died.

3. Water volume control: Watering should grasp the principle of "dryness and wetness", pay attention to timely watering during the growth period, keep the pot soil moist, and water the water twice a day when the summer growth is strong;

4,Air humidity: It is necessary to keep high air humidity around the plant often.In summer, spray water on the leaves and ground to increase the humidity of the air.The leaves should be kept clean in winter, and the leaves can be often sprayed with less water or scrubbing the leaves.

5. Temperature light: The most suitable temperature for Sanwei Aoi is 25 ~ 35 C.The cold resistance is very sensitive to low temperature. The wintering temperature should be above 10 C. If it is lower than 5 C, the plant must be harmed.In the summer, 50%of the sun should be covered, and the most jealous of the sun is mostly directly exposed.It should be placed in a bright place in the room. Too dark is not good for the growth of loose tails. It can be placed in a place with good light in winter.

precautions

1. San tail sunflowers are afraid of cold and weak cold resistance. The growing season must keep the pot soil moist and the air humidity around the plant must be maintained.

2. In the winter, you must also pay attention to often scrub the leaf surface or spray the leaf surface with a small amount of water to keep the leaves clean.

3. Generally, scatter -tailed sunflowers need to apply rotten liquid or Compound fertilizer every 1 to 2 weeks to promote the vigorous growth of the plants. The leaf color is thick and green.

4. When breeding of loose tails, there should be sufficient water and Fertilizer conditions.Usually keep the pot soil often wet, and during the high temperature period of summer and autumn, there must be high air humidity around the plants, but the pot water is not available to avoid rotten roots.

1. How to design the slide bed

First of all, the slide climbing must control the slope to avoid safety issues caused by too steep or curved angles.In addition, there are elderly people at home, which should be appropriately slowed uphill, and the bottom must be protected to prevent the body from being injured too much.It is best to put a buffer pad at the bottom to reduce the impact.The slope should be controlled within 70 , and the design of the slide should not be too long.If the length is too long, it is recommended to slow down the slope at the bottom and control around 30-40.

Secondly, there should be no sharp decoration around the slide, and the height of the guardrail must be mastered.In line with the principles of ergonomic engineering, in line with the height and body shape of the human body, the humanized design can avoid falling.In addition, the design of this slide staircase can be divided into two forms, one is arc -shaped and the other is a straight line.You can choose according to your own apartment, area, and layer height.General graphic design is more suitable for some smaller duplex and LOFT units, while curved design is more suitable for high -level and larger units.

2. What is the size of the children's slide bed

1. design size according to the slider's niphered style

When choosing a style, because of the different styles, the size of the children's slide bed will be different.Because children's slide beds are multi -functional bed tools, they can make different styles, such as the upper and lower layers of mother and child beds. Its height is 1.8 meters, the size of the bed below is 1.85*1.5m, the height of the slide is 1 is 1About meters.

2. design size according to the material of the slide closs

The material of the children's slide bed will also lead to different sizes in a certain amount.Generally speaking, the steel Tube is selected. The child slide bed is larger than the traditional bed size. The height is 1.9m, the size of the bed is 2.0*1.5m, and the slide height is about 1.5 meters.Left and right, the size of the bed is 1.8*1.5m, and the height of the slide is about 1 meter.

3. design size according to the space

It is very popular now. After all, the size of each room is different, so if you want to arrange space reasonably, it is a good choice to choose a custom children's slide bed.Because the size of these rooms is different, the customized children's slide clrings will of course be different.For example, the children's slide bed in the small bedroom can customize the height of 1.5 meters, the size of the bed is 1.8*1.2m, and the slide height is about 0.9 meters.If the Children's Room is larger, the height of the bed is about 2 meters, the size of the bed is 2.2*1.8 meters, and the size of the slide is about 1.5 meters.

4. design size according to the height of the child

There are also many customized children's height. For example, if the child height is less than 1 meter, the chosen small children's slide tools are generally 1.85 meters, the bed size is 1.8*1.2 meters, and the height of the slide is about 0.7 meters.If the child's height is more than 1 meter, you can choose a 1.8 -meter -high bed with a size of 2.0*1.5 meters and a slide height of about 1 meter.

5. design size according to the function of the slide closs

Children's sliding beds have many styles. Although they are called children's slids, many functions will be different. For example, increase the storage function, which can increase the height of about 20 cm.About 30 cm wait.

1. precautions for the installation of courtyard Lights

1. Pay attention to personal safety when installing

Pay attention to personal safety when installing the courtyard light, do not shock.When you are grounded, you should pay attention to the metal columns and lamps that are close to the naked conductor should be connected with the PEN line.

2. The light source of the garden lamp

The light source of the courtyard light should be installed with a small -power color rendering high -pressure sodium lamp, the golden capacity of the halide lamp, the energy -saving lamp and LED light.

3. The wiring of the garden light

When you are grounded, you need to pay attention to the metal columns and lamps that can be connected to the naked conductor should be connected with the PEN line. At the same time, the ground wire should be set up alone.At the same time, this can ensure that the garden Lights are more secure after installation and avoid safety accidents.

4. installation test of garden Lights

After completing the above installation work, the courtyard light needs to be allowed to be tried and observed whether the brightness of the lamps meet the regulations, and whether the brightness is stable, etc. In addition, the insulation test is required.To ensure the safer installation of the lamp.After completing the installation of the courtyard Lights, it is necessary to check the working status of the courtyard light and the operation of the switch, etc.

2. What problems should be paid to the use of courtyard lamps

Do not hang items and dry clothes on the lamps, otherwise it will easily cause the lamp to damage.

Check whether the brightness of the lamps regularly is normal. If there is a light, the lamps are dark, flashing, etc., the light bulbs should be replaced in time to avoid aging of the lamp.

maintenance of lamps regularly, including water -resistant paint and cleaning inspection light boxes, can extend the service life of the lamp.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;

1. What is the size of the Wall cabinet

Generally, the custom Wall cabinet is 2400 mm height, 1800 mm long, and is divided into two units with 900 mm long. The depth of the cabinet is 600 mm.

(1) Cabinet door of the Wall cabinet size

1. glass Wall cabinet door: Single -lap door is recommended not to exceed 950 mm, and the height is within 2400 mm.

2. Plate -type Wall cabinet door: Single -sliding door is recommended not to exceed 1200 mm, and the height is within 2400 mm. Note that the core board may be deformed.

(2) Clothing area of the Wall cabinet size

1. bedding area

400-500 mm high, 900 mm wide.Because it is inconvenient to get items, the upper end of the Wall cabinet is generally used to place non -commonly used items such as quilts, which is also conducive to moisture -proof.It is best to put the quilt in the storage tank. Not only does the dustproof, it is convenient to get it. According to the thickness of the quilt, the height of the bedding area is generally 400-500 mm.

2. drawer

400-800 mm wide and 190 mm high.Generally, 3 or 4 drawers are planned below the jacket area, which are mainly used for storage underwear.Calculating according to the height of the underwear, the height of the drawer should not be lower than 190 mm, otherwise it is easy to clamp the clothing when closed the drawer.200 mm high, you can put your clothes.

3. The top area

1000-1200 mm high, not less than 900 mm, and generally 55-60 cm.The jacket area is used to hang up jackets such as suits, shirts, jackets, etc.

4. Long clothes area

High 1400-1500 mm, not less than 1300 mm.Long clothes areas are mainly used to hang long clothes such as trench coats, down jackets, coats, dress, and ritual clothes.You can plan the width of the long clothes area according to the number of pieces of long clothes. Generally speaking, 450 mm wide is enough to use it alone. If the population is more, it can be widened.

5, stack area

350-400 mm high.The stacked area is used for stacking sweaters, T -shirts, Casual pants and other clothes.It is best to arrange the area between the waist to the eyes, so that the convenience can be reduced, and it can also cut into dust.If there are elderly people and children at home, they can expand the stacked area properly.Generally, after the width of the clothing is folded, the width of the cabinet should be between 330-400 mm.It is best to plan for a conditioning activity plate, which changes according to demand. For example, when the child grows up, you can hang the clothes rod to the top of the stacked area and change it to the jacket area.

How to choose a Wall cabinet

1. Unified style with the overall style

When buying the Wall cabinet, first see if its style is matched with your own house style, it is best to choose the Wall cabinet according to the style of your house.The general materials of the Wall cabinet are wooden materials, so when choosing, you should pay attention to the decoration effect you want to present. For example, if you are a simple style, you can choose a light color Wall cabinet.Wall cabinet.

2. Follow the quality of materials

Whether the material is environmentally friendly is related to the health of you and your family, so you need to check the national authoritative test report when choosing, and confirm whether the material meets the national compulsory personality standard.Whether the board is strong also determines the service life of the Wall cabinet. The thickness standard of the board should be 18mm. Such a plate is strong and durable, and the service life needs to reach more than 15 years. Of course, if you want to be thickened, the price is relatively high.

3. Look at the edge technology

Check whether the Wall cabinet process is exquisite. First of all, you need to look at the edge of the board. The edge sealing and the protection and moisture resistance of the plate are all functional. Good edge strips must ensure that the end surface of the edge bar and the plate is firmly flat.It is also necessary to ensure that the binding of the edge bar and other sides cannot have defects that are exposed, bonded, and excessive gaps. At the same time, the transition also requires natural, Smooth, and Smooth.

4. Look at the Wall cabinet price

When buying a Wall cabinet, you need to pay attention to whether the price of the Wall cabinet is transparent. First of all, you need to ask the calculation method of the merchant's Wall cabinet. Secondly, you need to ask the project content and technology contained in the price.The price of hardware accessories (usually the Wall cabinet area does not count the price of the drawer, plate, and hardware accessories). It is necessary to use a fair algorithm, calculate the price based on the actual standard materials used, and calculate the price based on the number of actual materials.

[Filem Stocks installation] What are the precautions for the installation of shelves for the installation of the shelves of the shelf?

What is the installation step of the shelf?

1. Preparation Tool

What are the installation steps for shelves now?Xiaobian first introduced the installation steps of the shelf storage shelf is a preparation Tool to allow everyone to face the problem calmly.So, do you know what the tools you need to prepare in this shelves are prepared in the installation steps?During the installation of the shelf, there are very few types of tools that need to be used, but one or two of them are not tools that ordinary families will use.In the installation steps of the shelf, the tools you need to prepare are wrenches, pliers, and electric diamonds.

2. Planning

The installation steps of the shelf are planned, which is one of the very important steps.There are many places for the installation of the shelves. You can operate the specific requirements of your home, such as installing it in the kitchen. Then, everyone must pay attention to its height and distance from the distance from them.It will increase your troubles in the process of cooking.During the installation of the shelf, everyone should pay attention to the size planned on the wall, and punch a punching according to the specific parts of the product. It is best to use things to mark it.

3. Observe the wall

What are the installation steps for shelves now?Xiaobian will introduce the installation steps of the shelf in the shelf is to observe the wall.Everyone may ask, what is the relationship between this wall and shelves installation?Everyone knows that in some people's homes, in their own decoration, the entire space may be planned again, and some hollow walls will be used. Such walls, the nailing power is very bad, so that their plants can not be placed.Therefore, everyone must check their walls during the installation process and install the shelf to install it on the solid wall.

4. Specific operation

The next shelf is installed to put your own products, one time, according to the relevant drawings, punching on the planned wall, and then fixing it with a nail.If everyone still wants to install the shelf to install the side of the hollow wall, everyone should first add the hollow of this wall to make it more nail, and then install it according to the relevant product drawings.Finally, the installation steps for the shelves that everyone needed to fix their products and fall from the air.

5. Summary

What are the installation steps for shelves now?Steps for the installation of the shelf, I will introduce it here. I believe that everyone can learn a lot of this step through this information and information.In fact, the installation of the shelf is still very simple. As long as everyone can be careful, then you can install any places you want to install in your home.If you still have questions about the installation steps of the shelves, it doesn't matter. As long as you can always focus on this website, you can know it very detailed.

precautions for the installation of shelves

1. Check out its model carefully before installing. It is better to check its size and overall number. Finally, check whether the surface is damaged. If so, you can apply for replacement.

2. The use of shelves is relatively flexible. It is clearly determined to be installed. If the indoor space is relatively large, you can be a bookshelf. If the indoor space is small, you can place some cosmetics or gadgets.

3. Pay attention to the problem of the material and installation of the shelves. The load -bearing capacity of the shelf is limited, and the overweight items cannot be placed. During the construction, the embedded parts should be made in advance according to use.