[glass Wall lamp] Which good glass Wall lamp is used for glass wall lamps and crystal wall lamps

How about the glass Wall lamp

glass Wall lamp is a more common material in the production process of many lamps. In the process of production of wall lamps, lampshades used to make lamps. glass -made wall lamps can produce different colors of products, and light transmission is also very good.EssenceTherefore, it is loved by consumers.And the price is also very affordable. For example, a glass Wall lamp with a model of 8032-2W, the price of 8032-2W, is 168 yuan. This is a European retro iron glass Wall lamp.The pattern of glass clouds is made of environmentally friendly glass. The luster is very good, which interprets a beautiful and romantic rural style.

Which glass Wall lamp and crystal Wall lamp are better

Compared with glass wall lamps, crystal Wall lamp products appear more high -end and texture, and the structure of its products is different. Most of the crystal wall lamps sold in the market use imported crystals to decorate lamps.Therefore, the crystal Wall lamp has a good elegant style.However, there are also many products in the market that use glass materials to impersonate crystals, so pay attention to the differences with glass wall lamps during the selection process.& gt; & gt;

Method of installation of glass wall lamps

In the process of installing glass Wall lights, the height requirements are generally about 80 cm from the working surface, while the ground is the most suitable for about 224 cm.The distance between the wall is about 9 cm.The method of installing the glass Wall lamp is very simple. After the position is determined first, then the glass Wall lights are fixed. The common methods are embedded or punching methods, and then the glass Wall lamp is fixed on the wall.

Method of glass Wall lamp purchase

The first is to look at the quality of the glass wall lampshade. Is the light transmittability suitable? Second, the pattern and color of the surface of the glass Wall lamp, whether it is consistent with the home style of the home decoration, and the fullness of these colors needs to be inspected, whetherIn line with indicators.The second is the brightness of the light.Generally, the light of the glass Wall lamp is soft, and its degree is better than 60W, and different types of glass wall lamps are selected according to the needs of their installation.If the room's space is relatively small, it is more suitable for choosing a single -headed glass Wall light, and the room space is more suitable for choosing a double -headed glass Wall lamp. In addition, the small space can also choose a thin Wall lamp, andThe light with a protective cover glass Wall lamp, so that during use, it can avoid the danger of igniting wallpaper.

The above is the introduction of the price of glass Wall lamp products. In order to install during our use, for the purchase of glass wall lamps, we should keep the glass Wall lamp products consistent with the decorative style of home, so as to add more to our home homeAesthetics.

1. Huang Yilan's breeding method

1. Soil

Choose a loose and breathable, good drainage and humus -rich micro -acid soil. It is best to use a well -breathable Flower pot such as tile pots and purple sand pots. You can fill in the soil with larger particles under the Flower pot.

2. Light

When the sun is strong at noon in summer, the plant can be appropriately shaded. At other times, the potted plants should be moved to the Outdoor to absorb sufficient light. The daily light period must reach 6 hours.

3. Fertilization

In the spring and summer seasons, Huang Yilan grew the most strongly. At this time, it was necessary to fertilize it at this time, and the frequency was about twice a month. nitrogen fertilizer and phosphorus and Potassium fertilizer could be used.At the end of June, alum Fertilizer can be poured once a week to reduce the pH value of the soil.

4, temperature

Huang Yilan is not resistant to cold. In winter, keep warm for the plant and keep the ambient temperature above 5 degrees. Otherwise, the plants will cause frost damage, causing plant death.

5. Watering

The principle of seeing dry and wetness should be followed during watering, and water does not need to be watered when the soil is not dry.Watering twice a day in summer, watering and watering every two days in spring and autumn, and watering once a month in winter.When the air humidity is too low, spray water for the leaves.

Second, the main points of the maintenance of the potted plants of Huangyelan

1. Change pot

In order to prevent soil plate knots and malnutrition, it is necessary to change the pots for plants on a regular basis.When you change the basin, wait for the pot soil to be in a micro -dry state, then remove the plant for the pot, and re -plant them into the prepared new pot soil and pour water.

2. Pruning

Before the winter, cut off the old, weak and dead branches of plants and too lush branches to reduce nutrients and make the plants smoothly overwinter.In the spring, we must top up and cut off the old leaves to promote new branches.

3. Prevention and treatment of diseases and insect pests

Anthuria and yellowing are the most important diseases of Yellow Lanlan. Red waxy and red spiders are the most important pests in Huang Xunlan.For diseases, you can spray the Bordeaux solution and apply iron sulfate to prevent treatment.For insect pests, in addition to artificial insects and cuts of insects, you can also use oxide and plant ash and other pests.

Third, how to trim Huang Yilan

1. Sparse branches

Sometimes the president of Huang Yanlan we breeding is particularly dense and intricate, so at this time we must cut off its too dense and overlapping branches. This can not only make the buds distributed balancedLight is conducive to growth.And you can find out the disease branch to avoid infection in time.2. Short interceptionGenerally speaking, as a bonsai plant in our family, the crown is more beautiful than the larger.So we trim in a short way to increase its crown.The short -cutting is generally cut off the newly grown branches buds 20 %, which can effectively suppress its growth, and at the same time stimulate the growth of the new branch buds, so that each part of the Huangyanlan grows evenly.

3. Go to

Simply to go evil is to cut off the bars that germinate the roots of the yellow cricket to avoid the loss of moisture. The purpose of this is to protect the growth of its theme branches.Therefore, when we usually care for Huang Yilan, we must pay attention to the roots of Huang Yanlan often. We will be stabbed in time before the branches germinate. If this time, we must trim it with scissors.

4. Auxiliary trimming

The auxiliary trimming refers to trimming methods such as shrinking, topping, and budding.The purpose is to prevent Huang Yilan's buds from growing over and affecting ornamental.Then cut off some buds will grow more evenly and maintain aesthetics.

How to make a princess skirt for Dogs for Dogs to make skirts for Dogs

Preparation:

1. Faber (can be the clothes you don't want, or the previous fabric inventory).

2. Sky (allowing you to draw pictures on the cloth, you can avoid cutting and waste fabrics, just cut the drawing paper drawings on the cloth).

3. Cut scissors (no powder with pencil round bead pen).

It is seriously emphasized that cardboard is very necessary! The stationery store can be bought. It is not expensive. Please buy a few more and refer to the cut pattern.

Step 1: Set up collar

1. Slim lace.

2. The combination (two pieces are together).

3. Cut your mouth (to look good).

Step 2: Slim Sleeve

1. Sewing sleeves.

2. Sewing cuffs.

3. Sewing sleeves and cuffs.

Step 3: Slim clothes

1. Sewing back and skirts (there are several folds in the middle of the skirt).

2. Roll skirt edge and the bottom of the chest.

3. Sewing the side line of the chest slices behind the back.

4. Roll on both sides of the skirt.

Step 4: Sewing chest sliced placket

The placket is on both sides of the button. I pressed the four lines with a sewing machine. It would be fine when the sewing was sewing.

Step 5: Sewing round neck

The general and the two chest slices are sutured with the back pieces, and by the way, the end of the collar also sew.

Step 6:If the collars are not good, it is not good without the collar. This step of sewing machine must not be able to do it with (too thick).

Step 7:Switch your Sleeve on your body.

Step 8:Do a bow (this is very simple, everyone should all, the stitching on the back should be bigger).

Step 9:Swipe the bowed bow on the back.

Step 10:Slim button.

The white button on the bright face is just to decorate. Our baby Dogs may bite down, and they may take off their clothes by themselves, so the dark buckle inside is a practical effect.Pay attention! There must be more secret buckles so that it cannot get so many buttons to take off the clothes.

LED lightThe life of the cannon can be up to 100,000 hours, and the service life of the usage can even exceed the life of people under normal use.In addition to having a long -term service life, LEDs have the advantage of power saving.General LED headlights can provide continuous lighting of tens of hours or even more than one hundred hours. Compared with the incandescent lighting area, it looks like a long light.The super -power -saving and shiny LED brand products are favored by many Outdoor enthusiasts.

Advantages of LED lights

1. The design of the LED light is a secondary optical design form. We shoot the light of the LED light into the area where the light is needed to make the lighting efficiency higher. Therefore, in many places, we are willing to choose the LED light.

2. The light decay of LED lights is very small and the service life is very long. After 10 years of use, it still has high use value. They are less than 3%in the process of continuous use of one year.

3. The light -emitting diode of the LED light is a low -voltage device, which is safe to use voltage, especially in public places.

4. The use period of LED lights is very long, and it can use more than 50,000 hours.

5. The light source of the LED light is unidirectional, and there will be no reflexes, which can ensure the efficiency of light.

The disadvantages of LED lights

No matter how perfect the lamps will have their own shortcomings, the same is true of LED lights, and their disadvantages are the following:

1. Although the light decay of LED lights is low, this is basically a high -power LED light, and the light decay of small -power LED lights is still relatively large.

2. The light color of the LED lamp is white light. Due to the individual defects in the manufacturing process and the coordination error of the lens, it is easy to form a yellow circle when used, which will affect the effect of the lamp.

3. The price is expensive, because of cost, the price is high.

1. What kind of sunshade mesh and web needle is more solid

The flat needle Shading net has a closer structure, smaller acupuncture pitch, stronger and durable, longer service life, good toughness, not easy to break, and strong wear resistance.The network needle is resistant to corrosion, which can be used in humidity, and at the same time, ventilation is better.Therefore, the specific choice of the Shading net should be selected according to the environment and requirements.

2. Which sunscreen mesh and oblique needle is durable

The durability of the oblique needle.The Shading net with the same material and needle is better to choose a diagonal needle.Because the oblique needle is more firmly woven, it is not easy to occur during use and damage.Relatively speaking, the durability of the flat needle is not strong, so it is recommended to choose the oblique needle when choosing a Shading net.The oblique needle's Shading net has a good effect on disaster relief and income. During the use process, it must be straightened, tightened, and flattened. There must be no low places. Otherwise, it is prone to stagnant water falls on rainy days, causing the net to be damaged.

3. precautions for Shopping.com

1. When buying a Shading net, many people are very easy to buy a net with a high shielding rate, which is mistaken for the high shielding rate.However, too high shielding rate causes weak light in the shed, reduced photosynthesis of crops, weak stems, and long -term problems, which reduces the production of crops.So try to choose the Shading rate as low as possible when choosing a Shading net.

2. When buying a Shading net, try to choose a guarantee product with big manufacturers and brands, and determine the use of products that have been used for more than 5 years on the greenhouse.

3. The thermal contraction characteristics of the shade net are easily ignored. The most contracted in the first year, about 5%, and gradually become small.With its contraction, the shielding rate will increase.Therefore, it is necessary to consider its thermal contraction characteristics when using a card slot.