[Partition Wall] How about the design of 10 creative wall partition design of the GRC light partition wall

How about GRC lightweight partition wall

This means "enhanced the material with alkali -resistant glass fiber, with low -alkali high -strength cement mortar as the tunnel material, light -quality inorganic composite material as the aggregate, and the national JC666 standard is executed;" GRC has thin components, high Telescope, alkali, alkaliLow degrees, the free expansion rate is small, the small cracking resistance is reliable, the quality is stable, and the moisture -proof, thermal insulation, non -burning, sound insulation, sawing, diamond, nailing, shaved, chiseling, and flat walls are simple to avoid wet operations.Improve the construction environment, save land resources, and reduce the load in the building lightly (1/6-1/8 of clay bricks) to reduce the foundation and beams and reinforced steel concrete, reduce the construction price of the project, and expand the area of use.It is the best material for the replacement of clay bricks for non -inherited heavy parts. In recent years, it has been widely used in recent years. It is a new type of light wall material recommended by the National Building Materials Bureau and the Ministry of Construction.Because the CRC light -quality partition is installed in the non -inherited weight of the building, the required installation parts are where the largest span and deformation and the weakest anti -load load capacity are all. Because the mouth slot of the light obstacle wall plate is assembled and Smooth, the surface is Smooth.The particularity of the board is easy to cause cracks in the connection between the board and the plate, the plate, and the doors and windows. When the load is concentrated, it will cause the light wall board to vibrate and deform.Hurrying, opening, splitting, equipment installation, surface plastering quality problems, etc. have proposed new topics and proposed some preventive measures.

10 creative wall partition design

The design of the wall partition has always been valued by housewives because of saving ground space.But how can the wall storage become creative.In fact, the wall partition of the design may be a highlight of the room. Today, let's take a look at these bright wall partition design.

This white Storage rack looks very simple and beautiful as a whole. The one -shaped partition is matched with a rectangular partition. It looks very bright, and the decoration has a strong sense of fashion. This type of shelf is suitable for fashion style home improvementOr a simple style home space.

The white wall is paired with a white storage frame, so that the overall effect of the matching is elegant.Without so many hue, the creation effect is also simple. If you are pursuing a simple type of people, then such racks are very suitable for you.

Red and black have always been classic matching. In this barrier, it is also well reflected. On this shelf, we can see that the size of the large Square and rectangular shelf is uniform, in the personality of personality, in the personality of personalityYu also reflects the overall harmony.

The light green background with white shelf looks very fresh. There are three layers of the shelf in a total of three layers, and there are three partitions in the middle. The overall looks both standardized and lack of creativity.

The overall red standing shelf is relatively simple. In addition, this red shelf is relatively spaced to add a lot of lively youthful beauty.

You can place a tall cup on this rack, and you can place some drinks such as red wine beverages below. The overall shape is very individual.Suitable for installation on the wall of the meal cabinet or the bar.

A satisfactory vase is paired with a flower with a personality and two small display paintings. It seems very creative and artistic.

This partition seems to be very individual as a whole. It looks like the shape of a boat. The solid wood texture on the surface is also clearly visible, and it is also very textured to touch.If you like simple and personality, this partition partition is very suitable for you.

The color of this partition partition is bright, and the large partition is covered with small partitions. This design is for a reasonable match for color, followed by increasing artistic sense.

The setting of this partition and desk form a good response, and it seems very creative as a whole.

The wonderful use of sawdust on flowers

1. The bandaging matrix of high branches

In the Meiyu season, the growing plant branches that were growing last year were selected to peel the ring 10-15 cm from the top of the top, and then wrapped in plastic Bags.Tighten the end, and then place the pot flower in the half -yin and half -yang to carry out daily maintenance management.You can take root in 2 to 3 months. After rooting, you can cut the mother plant into a new flower seedling.

2. The rooting matrix of plant cutting

Take a plastic film with a slightly longer height and a certain length, and spread the wet sawdust (pinch without dripping water), and then press the cuttings at a distance of 2 to 3 cm.~ 2 cm.Finally, it is tightly rolled, and every 10 to 20 cuttings are tied, each tied with large plastic film Bags, and tightened the bag to moisturize.Because the humidity is easy to control, the hair root is fast.

3, fat

Mix and mix with human dung urine, dress with plastic Bags, tighten the bag, place it at the temperature of 30 C to 35 C, and ferment and rot after 1 to 2 months.After fermentation and rotten sawdust, the nutrition is comprehensive, which will not make plants be nitrogen -deficient in phosphorus and potassium, and the texture is loose, and the dry and wet is moderate. It is a simple soil -free cultivation material, especially suitable for potted bamboo and orchids.After the fermentation and disinfection, after adjusting the acidity and alkali, the substrate of transitional cultivation after the test Tube seedlings is out of the bottle. The effect is as good as the perlite powder.

4. Made into Nutritional soil

If the sawdust is placed directly in the Flower pot, fermentation in the Flower pot will cause the flower root system to burn. Therefore, the sawdust needs to be placed in a plastic bag and add an appropriate amount of water.Its natural fermentation, about 3 months of sawdust rot into dark brown, can be used to cultivate flowers.

How to use the fermented sawdust

When the soil is equipped, you can add one -tenth of the fermentation sawdust, or it can be covered on the surface of the soil for flower Fertilizer in the later stage.

precautions for sawdust can raise flowers

1. In late autumn and winter, the temperature decreases. At this stage, most of the potted plants are mainly based on the cold prevention and warmth of the winter. At this time, fertilization can not be applied at this time.

2. There are no rotten things, including sawdust, not suitable for Fertilizer for flower plants. If it is placed in a Flower pot, it will produce the root system of the plants during the fermentation process, which will cause rotten roots of yellow leaves and other states.If you appear, it will be lost.

3. When sawdust fermentation, generally 20 days of fermentation in summer, fermentation of two or three months in spring and autumn, the fermented sawdust color will change from white to brown.Used.If there is not much sawdust, put it directly into the plastic bag, it will ferment.

1. How to clean and maintain Outdoor Furniture

Generally speaking, Outdoor Furniture materials are treated with special waterproof, Sun protection, and anticorrosive technology, so the usual cleaning and maintenance are simple.

1. Method of cleaning Outdoor Furniture

Aluminum alloy: If stains appear on the surface, wipe it with water, do not use acid or alkaline cleaner.

Teslins: Wipe with water with water.

Wooden tables and chairs: Wipe with rags, do not scrape it with hard objects to avoid damaging the waterproof layer on the surface.

PE rattan: You can use a soft brush, rag or vacuum cleaner to clean up PE rattan furniture, which should prevent collision and knife tip or hard matter.PE rattan can prevent moisture, anti -aging, insect -proof, and anti -infrared rays, so there is no need to worry about maintenance.

Plastic parts: It can be washed with ordinary detergents. Be careful not to touch hard objects, and do not use metal brushes.It should be prevented from scratching collisions and knife tips or hard objects.

Metal parts: Avoid bumps and scratching surface protective layers when moving; do not stand on folding furniture to avoid deformation of the folding part and affect use.Just scrub it with warm soapy water. Do not clean it with strong acid or strong alkaline cleaner to avoid damaging the surface protective layer and rust.

2. Outdoor furniture maintenance method

Daily maintenance: Use clean soft cloth to regularly wipe the surface of the paint, and do not let furniture contact acid, alkaline chemicals and oils.

Burning marks: The cigarette butt or the unparalleled match leaves the burnt marks on the paint surface of the furniture. If the paint surface is burned, you can wrap a layer of fine lines on the match rod or toothpick, gently wipe the marks, and then apply a thin layer of wax wafers, Jiao Yan can fade.

Boiling marks: Furniture the white hot scaling on the paint surface. Generally, just wipe the cloth with alcohol, flower dew, kerosene or tea.If you can't handle it, it is best to paint the surface again.

Scratch: If the paint surface of the furniture is scratched and the wood under the paint is not touched, you can use the same color crayon or paint as the same furniture color to apply it to the wound of the furniture to cover the exposed background.Just accept it.

Water stains: It can be covered with a wet cloth on the marks, and then carefully pressed the wet cloth several times with an electric iron to fade.

Second, different Outdoor furniture maintenance methods

Thunda, Solar umbrella -afraid of bumps

The Shading products are mostly supported by iron and aluminum pipes. During the installation process, pay attention to holding lightly and lightly. Try to avoid bumps or local stress and damage.At the same time, although sunshade and Solar umbrellas are specially used for Outdoor Shading leisure, it is not really used to avoid wind and rain. Therefore, it should be avoided as much as possible in windy and rainy weather.If the top cloth has accumulated water, it should be removed in time to avoid the long -term stress of the umbrella rack.

Plastic tables and chairs -afraid of exposure

Outdoor casual tables and chairs with plastic materials should be placed on a Smooth ground or grass as much as possible to avoid shaking.Plastic tables and chairs are very simple. You only need to wipe it with ordinary detergents, and then rinse with water.However, plastic tables and chairs must avoid exposure, otherwise problems such as fading and broken problems will occur.

Vine furniture -afraid of deformation

Vine tables and chairs or lounge chairs are relatively light, which is convenient to move. Therefore, water and cleaner can be used when cleaning such tables and chairs.clean the dust of rattan furniture. In addition to wiping with a rag, you can also use a vacuum cleaner.When using rattan furniture, pay attention to the interface of the rattan, try not to expose the editorial mouth of the rattan, otherwise it is easy to bend and deform.

Imitation vine furniture -afraid of bumping

The icing Outdoor Furniture is used in the material of the polyester resin. High temperature will cause the rattan to soften, which will cause rattan furniture to deform and cannot be used.Therefore, when using vine furniture, you must avoid sun exposure, but also avoid the impact of hard objects.

Wooden furniture -afraid of rain

Outdoor Outdoor Outdoor Furniture is specially antiche well, rainproof and Sun protection.During the use of use, it is required to maintain the corresponding temperature and humidity. At the same time, it should also avoid direct sunlight and rain, so as not to cause the surface of the furniture to change color or cracking. If it is not used for a long time, it is best to cover it with plastic cloth.The surface paint film coating of wooden tables and chairs can well protect the surface of the furniture, so it should be regularly cleaned on the surface paint film of wooden Outdoor Furniture.If you need to maintain renovation, you can use a dedicated Outdoor wooden furniture protective oil. It can be scrubbed according to the specified method. It is recommended to maintain it every 3 to 6 months.

Cast iron table and chair -afraid of corrosion

Avoid bumps when using cast iron tables and chairs. Such furniture cannot be placed in places with too many hard objects, nor can they change and shake frequently.It is best to use cotton rags when wiping such products, so that it is soft and no residue.In particular, it should be noted that because acid and alkali have a strong corrosion effect on iron, iron tables and chairs must be far away from acid and alkali. Do not use soapy water and vinegar to clean things.

What are the balcony houses

1. table and chairs

As part of the house space, the balcony naturally cannot be missing.Sitting on a chair to listen to the rain and read the newspaper, put aside the hustle and bustle of urban life, and washed the mind.Sitting in a chair in winter enjoying the warmth of the sun in the afternoon slowly.Of course, lounge chairs are the best choices here.If you build a suggestion bar on the balcony, with the bar chair, it is another kind of enjoyment of others.

2, sofa

Compared with the wooden balcony sofa, the metal material is more durable. Aluminum or aluminum -proof alloy material is the best, but be careful to prevent impact.

3. shelf

Set the rack:There is no doubt that the shelf is a very practical and convenient thing in our daily life.When installing on the balcony, try to install it as much as possible to reach out of the place, so that it is convenient to get and place it.

Flower stand:Such as Chinese Flower stand, iron art stand, stepped Flower stand, three -layer solid wood Flower stand, etc.

Drying rack:Such as electric drying racks, manual drying racks, semi -automatic drying racks, moving drying racks, etc.

cabinet:Such as laundry, bookcase, storage cabinet, Hanging cabinet, etc.

Pay attention to balcony furniture

1. The material should be strong and durable

The balcony furniture is different from the indoor furniture, which is more likely to be blown by wind, sun exposure, and rain. Therefore, the selection of materials should be selected from wood with high oil content, such as teak. Such wood can prevent wood from expanding or loose and crispy to the greatest extent.crack.In addition, people who like metal materials can use aluminum or balcony furniture made of alloy and waterproof treatment. Such materials can best withstand Outdoor wind and rain.bamboo and rattan furniture is easy to freeze, but pay attention to the maintenance of it. After the rain, wipe and clean up in time.

2. The furniture should be small

Balcony furniture should be small and exquisite. folding furniture is best. It is more flexible to use. Avoid crowded balcony. If you place small tables and chairs on the balcony, you can use it as a tea table or a small dining table.The vine or plastic balcony table and chairs with Parasol are suitable for placing in the roof garden or large garden. iron table and chairs full of European -style style are the first choice for European villas.Try to choose small and exquisite, easy to fold, so that you can put it in the corner when not in use, so as not to let the small balcony crowded or stop the aisle.

3. Weight

Most of the load -bearing capacity of the balcony is not suitable to use furniture with too large weight on the balcony location.It is recommended that when you buy furniture for the balcony, try to use the low weight (such as rattan, simple wood, etc.) furniture. In addition, when buying balcony furniture, you should choose a relatively rounded product, because the small balcony area is easier to area easierThere are bumps.

4, Sun protection, moisture -proof ability

Everyone knows that the balcony is a environment with large temperature differences and humidity and direct sunlight. Therefore, when we choose balcony furniture, we should also pay attention to the sunscreen and moisture resistance of balcony furniture.Do not use "coquettish" furniture on the balcony is also a knowledge point that everyone pays attention to.

How to sunscreen on balcony furniture

1. Closed balcony:The glass closed balcony can stick a layer of sunscreen insulation film on the glass to block the heat in the sun, protect balcony furniture, and install sunscreen curtains.

2. The open -air balcony:The open -air balcony is difficult to sunscreen and can be set on the balcony for sunscreen.The ceiling material should be selected for sunscreen. Considering the balcony furniture, you can choose a hood to protect the furniture to avoid damage.

1. What are the types of charcoal?

coal is often called, but in fact coal and charcoal are two substances. coal is an ancient plant buried in the ground. The solid combustible minerals have gradually formed by complex changes. Carbon is a porous substance, carbon burning and coal.The principle of formation is similar, and the substance left by the wood after decomposing the organic matter under high temperature and hypoxia.There are four main types of charcoal:

1. charcoal: It is a dark brown or black polyitic solid fuel that is residual under the condition of isolation of the air under the condition of isolation of the air.

2. Coke: Under the condition of isolation of the air, it is heated to 950-1050 C. It is finally obtained by drying, heat solution, melting, bonding, curing, contraction, etc.

3. activated carbon: It is a series of processes such as charcoal, bamboo charcoal, various fruit shells, and high -quality coal through physical and chemical methods to make raw materials crushed, sieved, catalyst activation, rinsing, drying and screening and other processes processing and manufacturingAdsorption agent.

4. Carbon black: It is a kind of light, loose and extremely thin black powder with large surface area and is a product of natural gas, heavy oil, fuel oil, etc. under the condition of insufficient air.It is a kind of non -fixed carbon.

How to make charcoal

There are three main methods for making charcoal:

1. Kiln burning method

The kiln burning method is a method of burning charcoal with charcoal kiln. It uses soil to build kiln and fills wood. Burning from the kiln door or fire door, so that the wood can be carbonized in the kiln.

2. Stemming method

Wood dry distillation is to place the wood in a dry distillation kiln. The process of heating and decomposing charcoal under the condition of isolation of the air, putting the wood in the dry distillation kiln, heating and decomposition under the conditions of isolation of the air;Wooden gas can condense wood (caramel and caramel acid; the remaining solid is charcoal.

3. Carbon mechanism charcoal method

The charcoal machine is a machine that crushes raw materials such as bamboo and wooden sawdust, Peanut shells, corn sticks to a granular shape within 10mm. After drying the dryer, put it in a charcoal furnace for carbonized machines., Two -raw material waste use for charcoal.[The process of charcoal mechanism charcoal & gt; & gt;]