1. What does it mean?

The Shading net is divided into scriptures and weft, and the edited Shading net is divided into several needles according to the different weaving needle distance.How many shots of the Shading net refer to the number of pins in each inch. The more the number of pins, the dense the network.Depending on the number of needles, the Shading net can be divided into one shot Shading net, two -needle Shading nets, three -needle Shading nets, and more pins.Of course, due to the difference in the number of Shading mesh pins, the fields and environments they are used will be different.

1. One needle Shading net

One shot Shading net is a mesh composed of a weir silk within a one -inch distance.Its weight is about 5 to 10 grams per Square meter.It is mainly used on the outer packaging on project products, replacing the traditional hemp cloth packaging to prevent humidity, rust removal and anti -rust.

2. Two shots of Shading nets

Two shirts shade nets are composed of two weirons within a one -inch range.Its main role is to strengthen the greening measures of construction companies in dustproof work.

3. Three -needle Shading net

The three -shirt Shading net is a net composed of three weft silk within one inch.It is mainly used in agriculture.The function is to provide coverage for agricultural planting and breeding projects.

4. Four -needle Shading net

The four -needle Shading net is a net composed of four weft silk within one inch.This network is a balcony Shading net. Its main function is for the use of Sun protection and garden sunscreen for Shading.

5. Six -needle Shading net

The six -needle Shading net is a net composed of six weft silk within one inch.This network is generally only used for the basic accessories and Shading of the fence facilities.

6. Eight -needle Shading net

The eight -needle Shading net is a net composed of eight weft silk within one inch.This network is limited to the use of engineering protection and avoid damage caused by high -altitude falls.

7. Nine -needle Shading net

The nine -needle Shading net is a net composed of nine weft silk within one inch.This net is the same as the eight -needle Shading net, but the density is different, and the performance is slightly stronger than the eight -needle Shading net.

8. Ten needle Shading nets

The ten -shot Shading net refers to a net composed of ten weft silk within one inch.The density of this network is very high, the green ten -pin Shading net can be used as a camouflage network, which can prevent drones and prevent sailing.

2. The difference between 8 stitches and 12 stitches of Shading nets

The difference between 8 pins and 12 stitches on Shading nets is that the density is different, so the Shading rate is also different.Generally speaking, 8 stitches will be thinner, and 12 needles will be dense.The more the ungrate mesh, the dense the mesh eyes, the better the Shading effect.Compared with 12 stitches, the Shading effect of 12 stitches is better.

2 needle Shading net: sunshade 40%-80%.

3 needle Shading net: sunshade 50%-85%.

4 needle Shading net: Shading rate 60%-90%.

6 needle Shading net: Shading rate 80%-98%.

6 needle round wire Shading net: 50%-70%of the Shading rate.

9 needle Shading net: Shading rate 70%-80%.

12 -needle Shading net: The Shading rate is 95%.

The commonly used Shading nets are 6 stitches and 12 stitches. The quality of 6 stitches is relatively poor. The rainproof effect is not good. 12 stitches can effectively prevent rain and prevent rain.

For Xiguang flowers, when using a Shading net, most of them can be used with two or three stitches.The demand for light is not highflowers, Most of them can be used with a four -needle.

1. What are the types of compound Fertilizers

Compound fertilizer can be divided into three types: compound Compound fertilizer, mixed Compound fertilizer, and mixed hybrid Compound fertilizer according to the manufacturing method.

1. Huahe composite Fertilizer

The compound Fertilizers made through chemical methods generally belong to dual -type complex Fertilizers and have no side components.Such as ammonium phosphate, nitrate phosphate Fertilizer, potassium nitrate, and potassium phosphate are typical compound Fertilizers.

2. Mix mixing Hefei

The compound Fertilizers made of several Fertilizers by mechanical mixing are simply mixed in the process of processing without chemical reactions, such as the ternary complex Fertilizer mixed with ammonium phosphate and potassium sulfate and Urea solid bulk.

3. Mixed Compound fertilizer

It is a Compound fertilizer that uses two or more monocular Fertilizers in the Chemical Fertilizer manufacturer through a certain processing process and contains multiple elements. Some chemical reactions occur during processing.Refers to this kind of Compound fertilizer.Most of them belong to the three yuan Fertilizers and often contain sub -scores.Such as ternary reptry Fertilizer such as Urea phosphate, potassium of ammonium phosphorposcopy, and potassium of ammonium nitrate.

2. What is the effect of Compound fertilizer

1. Promote crop growth

Compound fertilizer contains nitrogen fertilizer, phosphorus Fertilizer and other elements required for plant growth, which can meet the growth of plants. Therefore, Compound fertilizer can be applied to plants during the growth of plants or the maturity of fruits.

2. Balance fertilization

There are many types of nutritional elements of Compound fertilizer. At a time, Compound fertilizer can be applied at least at the same time. At least at the same time, more than two main nutritional elements of crops can be supplied, which can give full play to the mutual promotion of nutritional elements to ensure the balanced supply of crop nutrition.Essence

3. Improve crop quality

Compound fertilizer also has the effect of improving the quality of crops. Therefore, if the quality of the crop is poor, it is likely that it is caused by the lack of Fertilizer, which can apply Compound fertilizer for plants.

4. Improve Fertilizer utilization

The proportion of compound Fertilizers is matched according to the nutrient characteristics of the soil and the nutritional characteristics of crops, which can effectively improve the utilization rate of Fertilizer.

5. increase output

Compound fertilizer can also effectively increase the production of crops. Therefore, if the production of crops is relatively low, Compound fertilizer can be appropriately applied to the crop.

1. What Fertilizer is biological Organic fertilizer

Bio -Organic fertilizer is very environmentally friendly and does not produce secondary pollution, and the utilization rate is high.So what is the material of biological Organic fertilizer?

Bio -Organic fertilizer refers to a type of microbial Fertilizer and organic material and organic materials that are mainly based on the residue of animals and plants (such as livestock and poultry feces, crop straws, etc.) as the source and harmlessly treated and rotten organic materials.Fertilizer with Fertilizer effect.

It can also be said that biological Organic fertilizer phase is a new material for traditional Organic fertilizer. It is a big development space in the future and can replace the green Fertilizer of chemical Fertilizers.

2. What are the standards for Organic fertilizer execution?

The national standard of Organic fertilizer is NY 884-2012.

The organic matter content should be 40%.Effective living bacteria per gram are greater than equal to 200 or 200 million.The water content 30%.The pH value requires between 5, 5 ~ 8, and 5, which means that strong acid and alkaline cannot be said.The number of fecal colorectal population is less than 100 per gram.The mortality rate of corhels is more than 95 %.The validity period is that the shelf life should be more than six months or six months.

Then there is the detected toxic and harmful heavy metal. The total arsenic content per kilogram is 15 mg, total lead fifty mg, total cadmium three mg, total chromium 150 mg, total mercury two mg.

There is no regulation on the content of nitrogen, phosphorus, and potassium.Generally, domestic Organic fertilizer will write 5%in the packaging bag.

Remarks: The specific content can be viewed on the official website of the Ministry of agriculture. This is mainly to introduce some important execution standards ~

Nursing method of common symptoms of geckos

1. Eye infection

Eye infection is a common leopard disease. Symptoms include: swelling of the eye, flowing water, turbidity, and weakness.Eye infections may be caused by sand and dust entering the eyes or rubbing hard objects. Eye infections are difficult to cure. It is best to ask veterinarians for examination, or find another veterinarian!You can try the following methods, but not necessarily useful, because you don't know what the exact root of its eye infection is.You can rinse the infected eyes with saline; whether the temperature of the breeding box is in place, it may have respiratory tract infection, making the eyes unable to open; expose the palace in the sun for a short time, and the lack of natural light may make the body lack in the body.A certain element; a small amount of antibiotic drugs; appropriately supplement vitamins to the guardian palaceB-12, To improve its appetite and physical fitness, it will help recovery.

2. Skin infection

Skin infection is usually caused by two reasons:

The cushion is too humid.When the cushion is too wet, the abdomen of the palace will always be in a wet state. In addition, it will often rub with the pads.Brown or black spots.

2.Skin scratching or molting is incomplete.The toe parts are particularly susceptible to bacterial infection due to the humid and old leather residues, and the symptoms are manifested by redness, rotten, and pus in the Skin.Discover the above symptoms, you can try to transfer the palace to a clean environment; use a napkin as a cushion, and apply a small amount of polyhone iodine or new buds to the affected area to play a role in anti -inflammatory.

Third, digestive tract disease

The state of the excrement will be slightly changed due to the type of food.If you observe that the excrement is liquid, loose, or even the blood or excrement is green, which contains unlimited foods, then your palace is mostly diarrhea.Diarrhea may be caused by inflammation or parasites in the body.After discovering diarrhea, you can try to stop feeding the palace and observe the situation.If the palace still shows fatigue, you can try to stuff a small amount of ginger water for the palace.

If you have observed the loose sand and gravel of the palace repeatedly, and you have used sand (small particles) cushions, then this is likely to be caused by the pecking of the palace.Most of the pecking pads in the palace is due to calcium deficiency in the body; you can take some calcium powder and vitamins for the palaceAAnd replace more secure mats.

What is a Wall lamp

Washing wall lamps, as the name suggests, let the Lights wash the wall like water, mainly used for building decoration and lighting, as well as outlines for outline large buildings. Becauseled It has the characteristics of energy saving, high light efficiency, rich color, long life, etc. Therefore, other light sources with wall lamps are gradually being led Washing lamp instead, led The technical parameters and the technical parameters of the Wall lamp lamp lamp led The lamps are generally similar.

The manufacturing step of the Wall lamp lamp

1. First apply a bit of heat -conducting glue on the intact aluminum -based plate, which can help the wall washing the heat sink to dissipate heat, and then put the lamp beads on the ground welded one by one.

2. Put the shell of the wall washed on the welded lamp bead and seal the two grooves next to it.It is convenient for gels when it is filled with glue

3. Those who need to irrigate are the easier -drying silicone (white gel or vinyl) that is easy to dry into the Wall lamp.

4. After these silica gels are dry, check the lamp beads carefully if these glue is covered.

5. Just cover the glass of the Wall lamp and put it on the head.Water washing lamp is made like this.(These lines must be connected in the head of the group before the group head)

6. The last link is aging packaging.

How to install the Wall lamp

1. Do the work before installation according to the position placed by the power supply;

2. Fix the lamps with screws firmly;

3. Connect the lamp with the power cord firmly, and wrap the waterproof tape without the wire head;

4. When installing the wiring, a branch power supply is connected to a maximum of 8-10 wall lamps; or after 50 meters, connect another power cord.

5. After the installation is completed, please check the installation line to confirm that the installation is correct. After no electrical short circuit, the corresponding control power supply is connected;

6. If there is a problem in installation, please consult our technical personnel.Or log in to the Website of lighting Enterprise lighting directly