What do I need to bring for the first time in hot springs

1. Water and drinks have more moisture content. Generally speaking, the water temperature of hot springs is relatively high, and hot springs can easily lose water in the body and easily cause dehydration.Note that even if you replenish water.

2. You need to bring a washing supplies, bring a big bath towel with a small towel, and have a pair of non -slip slippers. Generally, slippers will also provide slippers, but you still feel that you bring it cleaner!You can also prepare a sealing waterproof bag and a mobile phone waterproof cover, which can put clothes and glasses.

3. Finally, bring some items such as a Swimsuit. The water temperature of the Hot spring is easy to destroy the elasticity of the Swimsuit. Try not to buy too expensive Swimsuits, otherwise it will be distressed!

4. mask.Apply the mask to soak in the Hot spring, which is very beautiful.

5. It is best to bring some food. You can add some food when you rest in the middle of the Hot spring.

What kind of items should girls bring in hot springs for girls

Equipment points: neutral alkaline

Hot spring water is very warm, bubbles can reduce inflammation and sterilize.However, most of the Hot spring water contains sulfur, and there are many minerals, which are often alkaline, so it will not be as Smooth as you think after drying it, and it will be a little astringent.At this time, you need some care products that can balance the pH. The pores are opened, and the wiping is just turned into a bath beauty.

Equipment 1: body milk

This must be brought, otherwise it is a pity to keep the dry body after the Hot spring.In addition to body milk, you can even bring a bottle of "oil". Applying it on the body will form a film. It is good for the Skin. Even if it is not applied, it is excellent to massage the elbow joint or heel.

Equipment 2: Washing -free moisturizing milk

Try not to let your hair run into Hot spring water, it will be more astringent, but it is inevitable, so even if you use moisturizing milk after washing, you will "knot" together.Bring a bottle of laundry -free moisturizing milk. Apply a little before combing, it will be unusually Smooth and easy to sort out.

1. What is the reason for fishing and drifting.

During fishing, the Fish drifting is usually a sign of fish hooking, but friends who often fish may encounter such a situation, that is, fishing fishing and drift slowly sinking, but it is not a fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish, such as the situation of fish. For exampleAt first, I caught 4 meters when I was drifting. For the same point, after a few poles, it became 3 meters. What is going on?

1. Slightly water

The main reason for the slow sinking during fishing is caused by slight walking water.No matter whether it is a river or a lake in the natural waters, even when there is no flowing water, due to the sunlight, the temperature of the water surface is high and the temperature of the water is low, and a slight water convection will form.Because this pair of flow is relatively slow, although it is not easy to be detected, it will push the bait under the bottom, which will promote the float on it, resulting in the floating fishing eye slowly decreases.

At this time, we can replace it with a slightly larger amount of lead.The purpose of raising the high fishing is to increase the top of the float.If we reduce the fishing low, such as adjusting one fishing one, two fishing two, the upper stress of the float will be very small, and the situation of slight water walking will push the fishing eyes lower and lower, so that laterCan't see floats.If we tune into eight fishing eight, nine fishing nine or higher, and the upper stress is large, then we cannot push the float of the water slightly, and we can fish normally.

2. There is a sauce layer at the bottom

The cause of the slow decline in fishing eyes is likely to have a sauce layer at the bottom.For example, there are silt or moss at the bottom of the water, which are all sauces.The number of drifts when the bait is in place is the fishing eye that we want, but the support ability of the sauce layer is relatively small. After the bait will slowly fall into it, the fishing eye becomes lower and lower.It may change from the previous three eyes to a glance.

The fishing eye caused by the bottom of the water decreases. We can raise the eyes to increase, and the fishing eye decreases, that is, the fishing spirit is a bit, so that the double hooks show the bottom hook to the bottom and the hook suspension.In this way, due to the effect of floating, the lower hook has a little support, and it will not fall into the sauce layer, and the fishing eye will not drop any more.

3, shrimp and crab

Floating slowly sinks, it may be caused by the slight hook of shrimp and crabs.The shrimp and crabs are slightly hooking, the float will slowly sink, but it will slowly recover, back and forth, and it is uncertain.There are places with shrimp and crabs. fish generally do not enter the nest, so when encountering shrimp and crab hooks, it is recommended to change the fishing spots for fishing.

4. Line group issues

The Fish drifting goes down to indicate that the gravity of the line group is greater than the buoyancy of the Fish drift. The buoyancy in the Taiwan fishing line group is mainly generated by Fish drift (Fish hooks, lead pendants, etc. will also generate buoyancy, but the buoyancy is much smaller than its own gravity), gravity of gravity), gravity of gravity).It is mainly generated by lead pendants, Fish hooks, eight -character rings, etc. (except that the gravity of other accessories is not well adjusted), the Fish drift will sink when the line group generates gravity greater than the maximum buoyancy of the Fish drift.

Second, how to adjust the Fish drifting

Fish drift always sinks for no reason, indicating that the Fish drift and the line group are in an unbalanced state. At this time, the drift is needed to balance the gravity generated by the line group and the buoyancy of the Fish drift production. The specific method is:

1. Pruning lead Skin:After the fish is drifting, you can trim the lead Skin. Until the line group's buoyancy is slightly greater than gravity. The line group that is mixed up in this method is more sensitive, suitable for Taiwan fishing with higher sensitivity.

2. Pulling drift seats:After the fish is drifting, you can pull up the drifting seat until the hook bait is lying on the bottom or even the lead to lie down. The wire group used in this method is relatively dull, suitable for traditional fishing with low sensitivity.

1. Can Sunscreen masks be the coronary virus?

Sunscreen masks cannot prevent the new coronary virus, because the droplets attached to the new crown virus are very small.

If you just wear a Sunscreen mask, the droplet will still transmit the new crown virus through the Sunscreen mask, so you must wear the most effective mask to prevent the new crown virus in order to reduce the risk of infection with the new crown virus.

It is generally recommended to wear medical surgical masks and N95 masks, which can effectively filter new coronal viruses.It should be noted that the mask cannot be used for a long time, because the longer the mask is used, the higher the chance of the mask is contaminated, so it needs to be replaced regularly, especially the disposable medical surgical mask. It is generally recommended to replace every 4 hours every 4 hours.Essence

2. Can Sunscreen masks replace medical masks?

No, Sunscreen masks are not medical masks, which can only be used for daily protection.The Sunscreen mask on the market is mainly textile fabrics. Because the material, craftsmanship and medical protective masks are different, it cannot be used instead of medical masks.Ordinary Sunscreen masks do not consider indicators such as filtering efficiency. They only consider the basic physical and chemical performance of the fabric and cannot have anti -virus or medical protection functions.

Most of the so -called "antibacterial" masks have added other tidal agents. These antibacterial tidal agents are harmful to the human body and have not been scientifically evaluated and demonstrated. It is not recommended that you try it.

1. How to use an inflatable mattress

The types of mattresses are diverse. The inflatable mattress is also a kind of Mattress. It has strong flexibility and elasticity. Pay attention to the method:

1. The initial use of inflatable mattresses

(1) Spread the air cushion.

(2) Open the gas mouth and automatically expand the air cushion bed.Turn off the gas mouth, fold the air cushion bed repeatedly, then press it a few times, and then open the valve to let the air cushion bed automatically expand, so that it completely restores elasticity and shape.

2, inflatable mattress gas stitching method

(1) Open the air cushion and open the gas mouth, the air cushion bed will automatically begin to swell.

(2) Regulate air pressure and adjust its comfort.

Note: If you keep it in a rolled state for a long time (not recommended), please use your mouth to blow a few timesLet it restore elasticity.

3. Method of exhaust Mattress exhaust

(1) Open the breath, roll up from the other end of the air mouth, and press the air.

(2) Turn off the gas mouth, roll the air cushion bed from the other end, and open the air mouth to discharge the residual air again.

(3) Finally, close the valve and save it at any time.

Note: When carrying, please put in the bag to avoid scratches.

4. Method of inflatable mattress custody method

Spread the air cushion, open the gas mouth, and store it in a cool and dry place (for example: placed on the bottom of the bed or behind the sofa, etc.), because the sponge of the air cushion bed has a memory shape, which can quickly swell into the most commonly used shape.

2. What are the precautions for the use of inflatable mattresses?

1. After the air bed is purchased, it can be inflated immediately after the first time it is charged (it is best 12 hours) to use it, because a buffer process is required at the tape and sewing of the air bed;Try not to get angry.

1. The difference between myopia swimming coating and non -coating

1. From the perspective of appearance, there is a layer of colorful and six -color film on the outside of the coating swimming mirror. Like wearing Sunglasses, others cannot see your eyes, and not coating myopia swimming mirrors are transparent.

2. Iopathy swimming mirror coating can effectively avoid strong sunlight and ultraviolet light. It is especially suitable for Outdoor use. However, if the myopia swimming mirror does not coil, there is no sunscreen isolation effect, which is more suitable for indoor water.

3. Aopia swimming mirror cover can reduce the refraction light of the surface layer of the optical lens, reduce the glory of mirror glass, and see more clearly in the water than the unplastic myopia swimming mirror.

two,The myopia swimage coating is better or not coated

I am myopia swimming goggles have a lot of knowledge. What myopia swimming mirror is still depends on personal needs.If it is used in the indoor constant temperature swimming pool, non -coating myopia goggles are enough.The coated myopia goggles are more suitable for wearing outdoors. It can larger the ultraviolet rays, and it looks cooler and professional on the surface.

Third, why myopia swimming mirror is coated

The light transmission rate of the lens itself is only about 91%, and some light will be reflected by two surfaces of the lens.The coating lens is a new technology that uses optical film and vacuum to put a certain thickness single -layer or multi -layer optical film to enable the lens to obtain some new and original excellent performance. Enhance or reduce the effect of light to increase the light transmission rate of the lens to 98%.

The main advantages after lens coating are: coating glasses can reduce the reflection light on the surface of the lens, clear vision, reduce mirror reflex light, increase the transmission rate of light, and solve the problem of wearing glasses in strong light. It also increases beauty. Essence