The main points of the sun room decoration

1. Put safety in the first place

To do a good job of decoration services, we must pay attention to the pursuit of details, and paying attention to the relevant details and content must be comprehensively considered, that is, the key and key points of the decoration service reflect the professional standards.Therefore, from the overall design of the Sunshine room decoration, at the same time as fashionable and beautiful, it is necessary to consider safety, so the safety is first.

2. Personalized design should be moderate

In the basic conditions of decoration services and the basic conditions of the service characteristics of the sun room, the pursuit of personality design is still very clear, and it is also the basic condition for achieving the decoration goals.In terms of the goal of decoration, the design of the sun room decoration should be moderate. This is also a very suitable choice for the possibility of decoration services and suitable for applications.

3. Basic engineering should be guaranteed

To achieve the high quality of professional decoration services, the basic requirement of Sunshine room decoration at this time is to achieve the characteristics of sunlight and leisure comfort. It is also the reason that pay attention to the overall construction professional high standards.In particular, the basic projects are important. The design of waterproof engineering and Sun protection should be fully considered, and the construction must be fully combined with patience.

Frequently Asked Questions of Sunshine room Decoration

1. Leakage problem

Sunshine room waterproof mainly has two ways: material waterproof and structural waterproof.There is a huge hidden danger in waterproofing materials. Once the Waterproof material fails, it will cause water leakage of the sun room.

2. Flowing fog

If the heat insulation effect is not good, this phenomenon is very easy to occur when the temperature difference between indoor and Outdoor is large.

3. Cold bridge phenomenon

The north is a area where the phenomenon of "cold bridge" is often occurred. Because the weather in the north in winter is relatively cold, the temperature of indoor and Outdoor temperatures is large. After the cold air enters indoors and combines with hot air, the water mist is adsorbed on the surface of the sun room.It affects the beauty of the sun room.

4. winter cold summer heat

When the Outdoor temperature is low in winter, the indoor heat loss is large and the room temperature decreases; when the Outdoor temperature in summer is high, the indoor refrigeration loss is large, the room temperature rises, and the hotter the weather, the higher the air conditioner load.The fundamental reason for the phenomenon of "cold winter and hot in winter" in the sun room is that the material insulation effect is poor, the product and supporting system are not perfect, or there is no product system standard and supporting system.

precautions for Sunshine room Decoration

1. The launch of sunny real estate tiles

If a small garden is planned in the sun room, then the floor tiles can not be so flat without paving, and some gully can be kept, so that the soil and water can be retained.A little level in the corner of the roof ground leakage can facilitate the flow of water in the soil.

2. The problem of placement of sun room plants

Because the sun room has sufficient sunlight, many people like to place plants inside, so the Sunshine room is not only suitable for plants, but also the plants have regulating the temperature, humidity, and air quality in the sun room. Choose to chooseWhen plants are placed, it is necessary to pay attention to the plants that are suitable for placing indoors, because some plants are not suitable for placing indoors, such as narcissus, peels, mimosa, and so on.

3. The problem of the placement of the Sunshine house storage cabinet

Putting a locker in the sun room, then it needs to be arranged in the corner of the sun room to avoid direct sunlight. Of course, when arranging in the corner, you need to see if the plants can climb to the locker.If you climb to the locker, the locker can easily be moisture.

4. Sunshine room drainage system problem

The drainage of the sun room also needs to pay great attention. The area of the pool in the sun room should not be too large, because the water volume is too large, the water will overflow, and the overflow of water over a long time will cause damage to the building.Time must leave doors and windows to make the sun room ventilation and ventilation.

4. Problem of Sunshine room structure

You must know that the main structure of the sun room is important. It is the most supportive support for power. However, when we build a glass house, we must first consider the structure of the glass house.The space area of the top floor, dear, pay attention!Do not change the area of the glass house without permission. If you change your own area at will, you will have a certain problem of safety hazards, and if you accidentally become illegal buildings.

5. Selection of Sunshine room Materials

The reason why it is called Sunshine room is definitely inseparable from the sun.So, the materials of its main structure must be selected well. As for the selection of materials, it is recommended that everyone is based on glass. When we choose glass materials, we must also pay attention to selecting insulation and sound insulation.In addition to the required glass as the main material, the help of the structural frame can be formed. The structure of the glass house must be available. The structural rack can choose the aluminum alloy Square Tube pillar, and the rest of the top surface of the Square pipe can be installed in both directions.In this way, the sun can be fully illuminated, and it is also safe and firm.

6. The heat insulation of the sun room

In the summer, if you do not do insulation for the sun room, it will allow us to live in a steamer.Therefore, here, I want to remind you that the heat insulation of the sun room also needs to pay attention to it. Since the sun room is made on the roof and it is made of glass, it will be very sultry under the scorching sun in the summer, so we willWhen making the sun room, the heat insulation treatment is required, and the heat insulation can be pasted with glass thermal insulation film on the top glass.Because the insulation film has a deep color reflective substance on the surface, it can reflect the sunlight to achieve the heat insulation effect.Putting the thermal insulation film on the glass can improve the ability of the glass, reduce the permeability of the glass, reflect the sunlight, and achieve the heat insulation function.You can also lay high -density rubber and plastic aluminum foil insulation board on the surface of the top glass, and the ceiling heat insulation treatment is set to set a quiet air fan at an appropriate location. The air duct is located outdoors.Essence

Pay attention to the renovation of the sunrise house on the top floor

1. Building Materials selection

The rules and model selection of Steel Structure materials must be fully taken into account factors such as the location, the height of the ground, and the orientation of the ground.Lightning protection, the current building is fully implemented. Generally, there is no lightning strike. Everyone is easy to ignore. On the top floor, you must consider the lightning.The top glass is cleaned. The city in my country is large. It is not transparent to the glass top of the sun room in a few days. It is critical to clean it. It is recommended to open a few skylights on the top surface.Based on load -bearing capacity.There are many aspects such as wind pressure and steel structures in the process of long -term use.Select the steel lining that meets the strength requirements.Steel Structure processing: According to the stress condition of the material.Ensure firm welding.To do a good job of rust, it is recommended to use high -temperature shaping or Outdoor iron to use boiling carbon paint.

2. Anti -rust treatment

glass: The top material is generally tempered glass, including single -layer tempered glass, hollow tempered glass, and safety glass of tempered glue.The roof is fine at the top floor, but if the top floor is built, it will be dangerous if it is too high. Many companies are unwilling to make the top -level sun room too high.Safety, especially top doors and windows.

What are the issues to pay attention to in the transformation of sun room?How to build a sun room on the top of the building is safe?Note at 2 o'clock.It is recommended that you prepare the preliminary preparations of the sun room. The two steps for selection and rust removal. Even if you succeed in the sun room, you can do the best Sunshine room life experience!

precautions for decoration

1. Overdog

For top -level real estate with strong lighting capacity, it is also one of the necessary steps to properly improve the lighting capacity of the room.It is recommended that you set up a sunshine that can be opened and closed outside the main lighting window;;Use curtains with strong shielding effects or laid insulation film on the glass in summer.This is a very necessary decoration method for west -to -high real estate.

2. waterproof

The most prone to the top -level property on top surface waterproof problems.If your home decoration is high and the requirements for decoration are higher.Then it is recommended that you simply spend a thorough maintenance of the waterproof on the roof and conduct a detailed inspection once a year.In this way, you can basically ensure that the indoor decoration is not destroyed by the top surface.

3. Insulation

The insulation performance of the top -level real estate is mostly weaker than the real estate on other floors. Therefore, when renovating the top -level real estate, you should pay attention to the thermal insulation capacity of the house: It is generally recommended that you use the insulation methods such as high -quality doors, windows and indoor soft Bags to create a one for yourself for yourself.winter warm and cool in summer, comfortable indoor living environment.

4. Wind -proof

The house on the top of the building also needs to be windproof.summer storms, so doors and windows must strengthen their firmness.In winter, the wind is Bone, and the windshield needs to be considered.

1. How much is one Square meter in the sun?

The price of the sunrier canopy is available from dozens to hundreds.The price of sunlight plates with different materials is much different. Generally, the price of sunrochemine of the material is 1561 Square meters. Of course, the difference in the material of the material will also be different.The price of PC Sunshine board is not a constant price, but a comprehensive consideration of the technical process level and the performance of the board. At that time, the price and other costs of raw materials and other costs were calculated.

The price of the PC Sunshine board is calculated as follows: 6mm-16mm thickness, and the general price is from 25 yuan to 100 yuan/. The thickness of the thickness of this interval is relatively common.X -shaped, rice type, honeycomb type.The thickness is 16mm-40mm, and the price is generally 80 yuan-2060 yuan/. The PC sunboard with this interval thickness is generally less used, and it is also divided into various shapes.

2. How to install the Sunshine Fragrance

1. First check the skeleton, which must be flat without welding scars and burrs.The skeleton must be completely dry and there must be no volatile solvents.

2. Powder the tan -based waterproof tape on both sides of the skeleton to form a small sink.

3. Place the sunboard on the skeleton, and the telescopic joints are reserved between the board and the plate.

4. Press the EPDM press on the interface between the board and the plate.

5. Fix it with a drilling screw.

6. The skeleton must be used at 1.05m in the middle of the sunboard.

7. The sunlight board on the wall shall not be directly contacted with the wall surface, fix it on the wall with angle aluminum, and then put the sunboard in and install it.

8. The sunblasts are sealing the mouth with aluminum tape first, and then fixing the edge or corner aluminum.

Three, installationSunshine Steakprecautions

1. Check the cutting size of the board and whether the reservation of the bulletin is appropriate. We must pay special attention to leaving enough uniformly swelling gaps. The calculation formula is as follows: Total expansion gap = bulging coefficient*The maximum temperature before and after local installation of local installation*board length.

2. The section of the plate was clamped in the large -scale plate installation engineering must contain at least one tendon rib, or the smallest part of the section of the edge of the board is 20mm.

3. Recognize the surface of the surface of the board, and install the surface out of the outside, and never allow the ultraviolet side to be installed inward.

4. Before installing, the protective film surrounded by the plate is 30mm-50mm. Do not clamp the protective film of the profile, but you should not remove too much, so as not to damage the board due to operation.

5. When the self -attacking nail is tightened, the force should be evenly tightened to ensure that the type plate is truly crushed and densely sealed.

6. In the case of cold bending of hollow plates, its curved radius must not be 175 times the thickness of the analytical material.

7. The hollow plate can only bend the ribs in the direction of the ribs.

8. The tilt installation of hollow plates should be directed to the ribs, which is conducive to the export of condensation water.

1. Types without trace hooks

1. The suction cup type without trace hook

Using the physical effects of atmospheric pressure, the non -trace hook, this kind of non -trace hook is relatively simple, and strictly requires strict requirements on the surface, and there are two possible problems due to the relationship between time and thermal expansion and contraction: the adsorption is not tightly tightAnd should not be removed.

2. Adhesive gum -free hook

The advantages and disadvantages of the effect of chemical adhesion and a hook product produced mainly depends on the quality of the adhesive.However, if the stickiness is not high, the stickiness will not be firm. If the stickiness is very high, there will be viscosity residues left on the wall when removing.And because the adhesive -free hook hooks are hooks that produce effects in chemical effects, they are more sensitive to water and temperature. In the special environment of water vapor and temperature such as bathroom and kitchen, it is easy to produce and fall off.

3. Easy -to -use hook

Easy -to -use hook hooks also belong to a sticky glue -free hook. This type of sticky glue has two technical characteristics.

Technical features: The principle of sensory pressure adhesion.First of all, the viscosity of the easy -to -use adhesive tape is based on sensor pressure adhesive technology, that is, it is necessary to apply pressure to the glue strip slightly when used to make it more fully contact with the wall.Normal use (special attention to different load -bearing range of different gums), the sensitive rubber strips make the loader Hanging longer, but the tighter it will stick to.

Technical features: Elastic extension technology.Sensor sticky glue is designed to make the glue stick firmly on the wall, and the elastic extension technology is designed to make the rubber strip from being smoothly removed on the basis of the wall.When you want to remove the easy -to -use hook, as long as you gently stroke the ends of the back seat, stretch the adhesive bars down vertically. According to the principle of scissor distribution, the viscosity on the rubber strip will disappear instantly.

It is easy to solve the problems of the previous two types of non -trace hooks, which cannot be taken, and cannot be taken down. The non -trace storage is completely an act that is convenient for everyone to operate without becoming a project.But the disadvantage is that the operation steps are cumbersome and strict, and the operations are prone to fall off.

4. Moving without trace hook

Moving without trace hooks are a compound hook. Three working modes of sticky glue, friction, and atmospheric pressure are combined to become a kind of waterproof without marks, and the gravity of remote reuse (exemption of glue) is strong.The stains of the surface can also be water.It can be said that the mobility -free hook makes the storage more convenient and casual.

2. How to use without trace hooks

1. When preparing to use no trace hooks, first check the external packaging carefully. Generally,No trace hookThe way and steps of use will be explained in detail in detail.

2. Open the packaging, take out the traceless hook and no trace tape (special attention, the point is the non -trace tape).

3. Pay attention to the protection bar on both sides of the free waterproof rubber strip. The protective bar on one side is unveiled and the post is directly sticking to the back of the hook.(Do not unveil the other side for the time being).

4. Since the rubber strip is a waterproof rubber strip, the positioning position is also in a humid and high temperature environment such as bathroom or kitchen. If it is in the bathroom, please open the shower with the temperature of the bath water and rinse the wall with water.After the wall has a certain temperature, turn off the shower.Wipe dry the wall first, wipe the wall with the alcohol cotton strip attached to the package, and then dry it with a hair dryer.(This step is very important when installing waterproof glue).

5. Open the protective bar on the other side, and then stick to the wall directly on the wall.Remove the separate hook (the hook is pushed up and it can be removed, and the rubber strip and back plate are still sticking to the wall), and then press the back plate on the wall with your hand to make the rubber strip evenly stress.

6. Then hang it with no trace hook for 24 hours, so that the sticky glue can be used normally (please pay attention not to exceed the bearing bearing of the non -trace hook standard).

7. The process is relatively simple.Remove the hook (keep the back plate and the tape on the wall), stretch the rubber strip vertically, until the back plate falls off.

three,Pay attention to the use of no trace hook

1. Try not to exceed loading.

2. Let the rubber strip adapt to the environment before use (first use the water with a certain temperature to wet the wall, then dry it, and then wipe it with alcohol cotton strips and blow dry).

3. Press the pressure evenly.

4. When removing, pull down the vertically and pull down to prevent the rubber from being pulled off (if it is pulled, please use a hair dryer to blow the rubber strip, and then pick up a section to continue stretching).

[Villa courtyard design] Villa courtyard design effect map appreciate villa courtyard design cases

Under the shelter of the big tree, the courtyard of this villa is extremely quiet, the green grass, the fresh natural floral fragrance overflows the entire courtyard.The soft cushion and the rainbow pillow, the joyful colors set the owner's amateur life leisurely and romantic.Inviting friends to gather here on a leisure weekend will definitely allow everyone to spend a happy holiday.

The advantage of the sea view villa is that it meets the desire of many people facing the sea, and through its beautiful scenery, it gives a nervous life.Therefore, of course, its courtyard has become the most comfortable life and entertainment space. It blows a soft sea breeze and feels the comfortable life brought by the soft beach.

The simplicity of the rural villas makes people forget the years, there is the most traditional and natural life atmosphere, and feel this original natural life.There are no flourishes in the prosperous metropolis, and more are quiet and quiet rural stories.

The rattan sofa chair and the white soft cushion are designed to design this small balcony into a quiet leisure area.It has sufficient light, the most natural soil, breathing fresh air, and feeling the simplicity of this simplicity with nature, which is so comfortable and comfortable.