1. Can the plastic swimming circle be broken if it is broken?

1. iron repair method

Let's prepare some roasted paper first.Then prepare an iron.Then take out our broken Swimming ring.Put the roasted paper on the Swimming ring.Then use the iron to iron the place.Take the roasted paper, so that our broken swimming circle is repaired.

2. Repair film method

Repair films are tailored according to the location of the repairs.Apply PVC for strong glue on the repair tablet.Plug the repair film in the position that needs to be repaired and flat.Put the repaired place under heavy objects and press for 12 hours.

2. What glue can be used for plastic swimming rings to make up for

Plastic swimming rings can be used for PVC for strong glue, which can repair air beds, inflatable sofas, water beds, inflatable boats, rubber boats, inflatable pools, baby swimming pools, swimming rings, neck circle, inflatable toys.

Note:

1. The surface of the Swimming ring must be dry, cleaned, dust -free, or oil, otherwise it will affect the curing speed and the adhesive strength to find the air to remove the air.

2. If the hole is less than 3 mm, you only need to drop three drops of glue. After 4 hours, drop it again, and then it can be used normally in 4 hours.

3. After using it, you should wipe the bottle mouth clean and cover it with a bottle cap.

Steel Structure Sunshine room construction method

Step 1: Rust removal and rust paint of Steel Structure

Before the Steel Structure of the sun room is welded, all Square tubes should be processed to ensure that the Steel Structure is not easy to rust.

Step 2: Welding main structure

Fang steel with a specification of 80mm*80mm and a wall thickness of 3mm, welded four -corner columns according to the measurement size and design requirements, and four -sided circle beams as the main load structure of the entire sun room.The verticality of the column and the distance between the column and the column should not exceed 5mm in the positive and negative

Step 3: Welding main beam and auxiliary beam

Fang steel steel with a specification of 76mm*44mm and a wall thickness of 2.5mm. According to the design of the top surface, the beams and longitudinal beams are reasonably distributed.Here you can choose Square tubes of different wall thickness and specifications according to actual needs.During welding, the connection of the Steel Structure must be full, no fake welding, not loose, seamless, the best welding method is fish scale welding.After the Steel Structure is welded, the welding place must be polished, so as to maximize the safety of the sun room.Ensure that in future use, it can resist the strong wind attack.

Step 4: beautification of Steel Structure

After the Steel Structure is welded, the 1.2mm thick stainless steel plate can be folded by the size of the steel to wrap all the Square steel.In this way, it can prevent the wind of the Steel Structure from blowing and scraping, but also increase its aesthetics.Some people do not wrap them out of cost considerations. Instead, they do paint on Fang Steel. This is also possible, but it is generally troublesome to maintain the opponent's steel every two years, which is more troublesome.

Step 5: Sunshine house Cover

According to the welded Steel Structure, the top surface materials for the sun room can be made. You can use color steel plates, sunlight plates, single -sided tempered glass or hollow tempered glass.Single-sided tempered glass can be 8mm-12mm thick, or 5mm 9A 5mm hollow tempered glass. color steel plates can use 80mm or 120mm thick, with corrugated color steel plates.

Step 6: Make and install facade doors and windows

The facade doors and windows of the sun room can choose aluminum alloy doors and windows, broken bridge aluminum alloy doors and windows, wooden bag aluminum doors and windows or pure solid wood doors and windows.The way to open the windows and windows is generally recommended to use a flat window to ensure the sealing of the sun room. The waterproof and windproof performance is much better than the sliding window.

Step 7: waterproof of Sunshine room and doors and windows

After the above work is completed, you can seal it.For color steel plates on the top surface, generally use a foaming agent to seal the various connection points, and then use the SBS modified asphalt linker water to prevent waterproof in the binding part of the color steel plate and wall to ensure that it will not leak in the future long -term use.If you use glass as a roof, you must use structural glue, and ordinary sealing can not be used.In addition, be sure to choose the sunny weather. You must not make glue during rainy days, and you must avoid raining as soon as the glue is finished, so as to prevent rainwater from entering the glue, causing the silicone to solidify it.There will still be a honeycomb -like gap in it, causing the leakage of the sun room.

Step 8: Check and end of the sun room

After all the construction of the sun room is completed, check it to find possible hidden dangers, including structure load, layout, door and window opening smoothly, whether the waterproof treatment of top surfaces and doors and windows is omitted.clean the construction site and end.

precautions for the construction of Steel Structure Sunshine room

1. The Steel Structure house is assembled from various components. What problems should be paid attention to when building a Steel Structure house?To ensure the quality and stability of Steel Structure houses.

2. To figure out the arrangement of the original structure, choose a reasonable Steel Structure and the original structure connection position and connection form to avoid the load of Steel Structure load to destroy the original structure.

3. The force of the Steel Structure should be clear, and the transmission route of the force should be clear and concise.Due to the obvious stress vibration of the Steel Structure itself, it is necessary to accurately analyze and calculate, strictly control the structure deformation and vibration frequency of the structure, ensure the visual aesthetics of structure use, eliminate the formation of structure and human activitiesAt the same time, this can ensure the comfort during use.

1. Can the Sunshine house use a glass film?

If the Sunshine room is not pulled up in the summer, it is like a stove. The furniture inside will be faded for a long time. The sun room is pasted with a building film or replaced the thermal reflection glass, so is the sun room sticker building film?

The Sunshine room can be used to shade through the building film.

1. Economy: The combination of tempered glass and glass stickers, the effect is similar to the thermal reflected glass, but it saves a total cost of about 50%than replacing the thermal reflected glass.

2. Convenient: Pass directly to the building film more convenient and fast than replacing glass.

3. Environmental protection: The existing glass is used directly to the building film for the sun room to upgrade its heat insulation and safety performance, which will not cause pollution and waste.

4. Safety: In addition to the insulation of the building film for the sun room, it also has a certain safety enhancement function to protect the glass and prevent the glass rupture from hurting others.

5. Lightweight: If you choose to change the glass, the total weight will increase, and the building composite will increase. If only the building film is pasted, there is almost no change in weight.

Taken together, the Sunshine room sticker glass film is quite good, so what kind of film is good for the sun room?

2. What architectural film is suitable for Sunshine room posting

There are many types of building membranes. Generally speaking, the application of the Sunshine room is a thermal insulation film. The benefits of thermal insulation film are mainly:

1. The thermal insulation film can make the temperature difference between indoor and Outdoor 3-7 C. When turning on the air conditioner in summer, a part of the electricity cost can be saved, and the indoor calories will not be emitted quickly in winter.

2. The thermal film can also block certain ultraviolet rays. Generally, its installation glue contains UV absorbers, which can block 98%-99%of ultraviolet rays to prevent ultraviolet sunburn.

3. The heat insulation film used in the sun room also has the fragments of the glazed glass. It can paste the glass fragments to avoid the glass residue after the glass is broken.