1. What does Fish drift ripe mean?

Fish drift is a very important Tool in the fishing process. Its main function is to convey the signal of fishing bait. At the same time, it can help us change the location of the fishing water layer and adjust the status of the hook bait. Before using the Fish drift, it is necessary to make correct adjustments.Otherwise, it may not be able to accurately judge the state of Fish drifting, which is the so -called "drift".

Drilling is one of the essential basic techniques in fishing. It involves the adjustment of the balance of the fishing group in the water. The principle is to increase or reduce the weight of the lead pendant and the position of the mobile Fish drift, so that the line group is suffered by the line group.The buoyancy generated by gravity and Fish drift can reach a balance.In this way, when there is a fish biting hook, the movement of the fish will break the balance of the line group and accurately pass it on to the Fish drift. The fishermen can determine whether the rod is needed to pierce the fish based on the Fish drift.

Second, Fish drift tone term

1. Halfwater state

Semi -water does not mean half of the water depth, but the distance from the fishing group to the bottom.When adjusting, the closer to the bottom, the more accurate the adjustment.A common method is to find the bottom with the lead, then pull the float to the position of the sub -line plus the float length.

2. Flat water state

Flat water refers to the state where the float and the water surface are parallel.When the float is just parallel to the water surface, it can be called "0".Seven -star drift tune water refers to the top of the top of the top of the water.Setting water is also one of the most common ways to dill in wild fishing.

3. Demonive state

The melting refers to the position of the float by adjusting the position of the lead Skin in the semi -water state.The more the exposed meters, the higher the adjustment.In general, the higher the adjustment, the more sensitive the floats; the lower the adjustment, the more dull the float.

4. fishing state

The fishing eye refers to the specific number of messengers after Hanging the bait to expose it by moving the float.The more the exposed meters, the higher the fishing.Under normal circumstances, the lower the fishing, the more sensitive the floating drift; the higher the fishing, the slower the float.

Third, the correct way to drift Fish drift

When Fish drift is drifting, it is generally determined based on factors such as water depth, water flow, and target fish species.What about it?

There are many ways to dill fishing, and the steps are not exactly the same. Generally, it is recommended to learn one first, proficient in one type, and other drift methods are also touched by bypassing. The following 5 -step drift method is introduced to yourefer to:

1. Find the bottom

Finding the bottom is always the first step in bleaching. It is to determine the depth of the semi -water. At the same time, to see the depth of the fishing spots, it can be roughly tried if the bottom can be tried.It is relatively simple to find the bottom, that is, the lead Skin is covered with enough lead Skin, but there is a certain need to pay attention. At this time, the state is to lie down at the bottom of the lead. It is best to expose a small amount of mesh. Keeping the water line is straight.

2. Drinking

The drop -down float determines a depth to adjust the drift. This depth is often said to the semi -water depth. The closer to the depth of the semi -water depth, the more accurate the drift.How much distance does the drop -down drift?When the lead pendant is looking for the bottom, the lead falls to the bottom, and the sub -line is lying on the bottom of the water, so as long as the drop -down distance exceeds the length of the sub -line, it is basically suitable.But for the sake of insurance, it is often a 1.5-2 times.The first space Beans in the floating seat can stay in the bottom of the bottom. When you hang the bait to find the bottom, find the bottom between 2 space Beans, and the bottom will be very fast.

3. Determine your eyes

Once the depth of the semi -water is determined, and the lead Skin is trimmed.As for how many meters, you need to consider the weight of fishing and bait.Generally speaking, bait still wants to fish lightly, and the eyes cannot be high.Anyway, there are formulas to refer to, fishing eyes = eye-double bait weight.It can be seen that this formula is related to the height of the purpose of fishing and the weight of the bait. On the other hand, how much is determined by the eyes, and it is necessary to consider the weight of bait and fishing.

4. Weighing bait

Some fishermen may ignore this step, hang the double bait to find the bottom, and start fishing for the number of mesons.To say that fishing can definitely be caught, but it is not accurate.It is best to hang a double bait to see how heavy the 2 bait are.This is convenient and flexibly adjusted to Lington, clearly knowing the state of double bait on the bottom of the water, and easy to find.Directly hang the double bait to find the bottom. If the bait is very heavy, then there is no problem. If the bait is light, the bottom will be exhausted.

When you say that the bait is heavy, you may hang both bait without the number of meters, or you can have the goals.If you do nt have a few meals, you can catch a few double bait to the end, but you just know that the double bait is in the end.If there are meters, assuming that it is 2 mesh, as long as you hang the bait to find the bottom, the fishing eye is a little more than 2 meters, then it will be the end.

5. Determine fishing

We fixed a space bean when we found the bottom, and the length of 1.5-2 times the length of the sub-line was pulled down, so that we don't need to try too many times when we find the bottom.We have adjusted 6 meters above. Hanging double bait is 2 meters. Hanging single bait should be 4 meters. If you want to catch a bait to the end, one bait does not go to the end, find the bottom fishing 2-4 meters, and the fishing double bait to the end.fishing 4 meters more.If you want to catch a few eyes and fish, you can catch what you want to catch. This is the benefit of knowing the weight of bait.

Fourth, what are the tunes of Fish drift

When the fish drifts, there are many ways to adjust, such as adjusting the three fishing two, three fishing three, three fishing and three, etc., generally choose according to the needs of the fisherman and the fishing point.Introduce it for everyone:

1. Tune three fishing two

This is a common method of drift.First of all, find the depth of water at the bottom by heavy lead, and then cut the lead Skin under the half water, so that the drift is exposed.Finally, hang the bait and pull the drifting seat, so that the Fish drifting just shows two eyes.

2. Tune three fishing three

This is also a common method of drift.Similarly, first use heavy lead to find the depth of water at the bottom, and then trim the lead Skin in the half -water state, so that the drift is exposed to the three purposes.Finally, hang the bait and pull the drifting seat, so that the Fish drifting just shows three eyes.

3. Rather four fishing two

This is another common drift method.Similarly, first use heavy lead to find the depth of water at the bottom, and then trim the lead Skin in a half -water state, so that the drift is exposed to the length of the four destinations.Finally, hang the bait and pull the drifting seat, so that the Fish drifting just shows two eyes.

4, adjust the four fishing three

This is also a common method of drift.First of all, find the depth of water at the bottom by heavy lead, and then cut the lead Skin in the half -water state, so that the drifting exposes the four -purpose length.Finally, hang the bait and pull the drifting seat, so that the Fish drifting just shows three eyes.

5. Turning five fishing three

The last common drift method.Similarly, first use heavy lead to find the depth of water at the bottom, and then cut the lead Skin under the half water, so that the floats show the five -purpose length.Finally, hang the bait and pull the drifting seat, so that the Fish drifting just shows three eyes.

1. How much is the Fish drifting

The three major pieces of equipment to be used in Fishing rods and Fishing lines are used side by side. It can convey the information of fish swallowing bait to the fishermen and display the location of the fishing spots. So how much is the price of Fish drift?Intersection

There are many Fish drifting products on the market, and the price is high or low. From a few yuan to hundreds of yuan, most of the Fish drifting prices are about tens of yuan. The main factors that cause price differences are production brands, materials, and materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, and materials, materials, materials, materials, materials, materials, materials, and materials, materials, and materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, and materials, materials, materials, materials, materials, and materials, materials, materials, materials, materials, and materials, materials, materials, materials, and materials, materials, materials, and materials, materials, and materials, materials, and materials, materials, and materials, materials, and materials, materials, and materials, materials, and materials, materials, and materials, materials, and materials, materials, and materials, materials, and materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, materials, and materials, materials, materials, and materials, materials, materials, materials,Performance parameters, work fineness and other aspects.

Note:The above price source network is for reference only.More Fish drift prices reference & gt; & gt;

2. Where can I sell Fish drift

As a common Fishing gear, Fish drift can be bought in fishing gear shops. Some black pits (commercial fish ponds) usually buy Fish drift.If you buy Fish drifting in a physical store, some brands and material Fish drift cannot be bought. At this time, you can also buy it through an online e -commerce platform, or buy it through a second -hand trading platform.

Third, how to choose a good fishing float

fishing floating is "the eyes of the fisherman". Good floats can quickly and accurately send out the oral signal to provide strong help for our spiny fish.If you want to buy good floats, pay attention to these aspects:

1. Whether to eat water

The so -called water eating is the change of the number of floats after the adjustment.This phenomenon has caused a lot of obstacles to our fishing.Therefore, choose floating drifts that do not eat water.We can wrap some leading leather on the tuned floats and put them in the drift barrel to expose a certain number of mesons.After a day, observation of the number of goals changed.If there is a change, it means that it is a floating drift.

2. Tongshu

To put it simply, it is the center line of drifting, drift, and drifting tails.The appearance looks straight and has no curved.You can open one eye, look at the tip of the drift to the tip, rotate the float while looking, and observe whether the float is straight and uniform.

3. Focus

Put the floats on your fingers and see where the support point is in the float.The closer to the position, the more the center of gravity is, the faster the float turns over.On the contrary, the focus is on the focus, turning slowly.

4. Metropolitanians

Whether the number of drifting tails is clear, whether the length is uniform, whether the size is consistent, etc.In addition, you can squeeze the tail with both fingers and experience whether the layer of the drifting tail is Smooth, Smooth, and raised.The aim of good floats must have the above advantages.

5, lacquer surface

Whether the paint surface of the floating appearance is flat, Smooth, the light is bright, and whether there are stains such as bubbles and particles.A good float appearance should be Smooth, flat and shiny, without any stains and bubbles.

1. How to divide the Fish drifting model

Fish drift is one of the most basic tools for fishing. It is called float, buoy, fish floating, etc. The main role is to convey the signal of pouring bait underwater, and can change the state of fishing layer and adjust the hook bait.Divide the model according to the amount of lead.

The so -called leading amount refers to the weight of the leading pendant required when the bleaching level and the lead falling from the bottom. The same type of drift is generally three models: 1, 2, and No. 3 (some Fish drift has some fish drifts.No. 1 to 5, even 1 to 7).

2. How to choose a model for fishing Fish drift

When buying Fishing floats, you will find that floats are always sold one by one. There are generally 3 or more floats. Different models of buoy are suitable for different situations when fishing:

No. 1 Fish drift: No. 1 Fish drifting is the shortest whether it is eaten or drifting. It is recommended to use No. 1 Fish drift when making fishing in the shallow water area. It is also recommended to use No. 1 Fish drift in the season when the fish is not active.

2 and 2 Fish drift: No. 2 Fish drifting, whether it is leading or drifting, is centered. When the fishing point water is not too deep, it can be drifted with No. 2 fish. Breeze weather or slightly walking water is also recommended to use No. 2 Fish drift.

No. 3 and 3 of Fish drift: No. 3 Fish drifting is the largest whether it is leading or drifting long. It is recommended to use No. 3 Fish drift when making fishing in deep water. When the wind is relatively large or the water is severe, it is recommended to use No. 3 Fish drift.

In actual application, there are two cases of the following situations that need to flexibly adjust the choice of Fish drifting models:

1. Water

The water surface is calm. Generally, the floating float, which is the No. 2 drift.If there is a water situation, we first cut the lead Skin and tighten the fish line by the floating buoyant to prevent the water from getting water.

If you walk more seriously, go to the No. 3 float, increase the amount of lead, increase the weight of the bait, and tighten the fish line to achieve a stable purpose.

If we do not use it, we will use Running lead. You can complete only 3 steps to run the lead: add a large lead Skin to sink the lead Skin and stabilize the fishing group;Turn shortening and increase sensitivity.

2. Quick switching of fishing and fishing bottom

In summer, the temperature is too high, the oxygen content in the water is reduced, and the rising fish is common. Especially the black pit, the water quality is poor, the oxygen content is lower, and the basics of the basics will not have any mouth.Change to fishing.

Among them, it involves drifting. Drilling is a very troublesome thing, and many fishermen are not rushing well at all. If you have a set of floats at this time, it will be much simpler. If you use No. 2 to fish bottom,If you want to change it to fishing, just change to the No. 3 float, and you can complete the float of the drop.

The fishing has no mouth, I want to continue fishing for the bottom, take the No. 3 and change to the 2nd, pull the drift, the fishing bottom will be completed, and the fishing bottom is switched freely.

If the small fish is so powerful, we can change the lead 1 to run the lead and filter the fake signal.