1. What are the characteristics of figure skating shoes

Flower skating shoes are a kind of Ice knife shoes. They are ice -knife shoes worn during skating.

The body ice knife knife is generally short. There are several ice teeth at the front of the blade. Most of the high -shoes waist design is used to provide sufficient support during jumping.Graphic patterns ice knife, ice dance pattern ice knife.Because the pattern skating movement is mostly jumping and rotating pace, the front -to -teeth are allowed to contact the ice surface when the ice knife is leaned at 10 degrees.Generally, the ice knife blade of the skating shoes is thicker. The high -grade ice knife is not less than 3.8mm. The hardness is HRC56 to 60.

2. What are the characteristics of speed skating knife shoes

Speed skating knife shoes is also a type of Ice knife shoes, but it is different from the figure skating shoes. It pursues absolute speed and requires fast speed, so it is different from other Ice knife shoes.The characteristic of speed skating knife shoes is:

The knife is very long, the blade is narrow and flat, the blade is large, the area of contact with the ice surface is relatively small, the area of the ice is large and the friction resistance is small, the waist waist is short to reduce the center of gravity and reduce air resistance.

Speed skating knife shoes are divided into two types: sprinting channel speed skating knife and big runway speed skating knife. Among them, the short -runway speed skating knife, also known as the "Claip ice knife". 1000M) Setting, the thickness of the knife is 1.2 0.1mm, and the hardness is HRC56 60;In the ice, the ice knife is still on the ice, which extends the time of gliding. The speed of a few seconds of a few seconds per step may be increased by a few seconds after long distance accumulation.

Third, the characteristics of ice soy shoes

Ice and soy shoes are also a kind of Ice knife shoes. It is ice -hockey -worn ice shoes. It is different from the patterned skating shoes and speed skating knife shoes.

The knife is height and short, and the basics are the same as the length of the shoes.Divided into the goalkeeper ice hockey knife and player ice knife. Because players often need to stop and turn urgently, turn around, the knife body needs high strength. The thickness of the blade is 2.8 0.1mm, which is arc -shaped, and the straight part cannot be less than 80mm in the middle.The ice knife is made of suitable hardness and strong wear -resistant alloy. The knife body has a certain arc.

1. Can Ice knife shoes only slip on the ice?

Yes.

Ice knife shoes can only slip on the ice, the ice knife of the Ice knife shoes is very thin, and using the ice knife to contact the ice surface, there will be a layer of water film on the ice knife, thereby reducing the friction between the ice knife and the ground, so that people can on the ice surface on the ice surfaceSetting; if it is in other places or grounds, because there is no ice characteristics, you can't glide on youaring skates.

2. Can Ice knife shoes walk on the ground?

Ice knife shoes are generally used on skating rinks. Some friends have such questions. Is it okay to walk on the ground?The answer is negative.

Generally speaking, Ice knife shoes are designed for ice skating. They can only slip on ice. Wearing Ice knife shoes on the ground is not only difficult to walk, but it will easily damage the ice knife.If you walk on, you need to put on a protective cover to avoid damaging the ice knife.If you don't wear a protective cover, try to stomach to your toes with the tooth of the tooth, and don't use a fragile blade to the ground.

3. How to maintain Ice knife and shoes

Ice knife and shoes are important equipment for skating. You must pay attention to maintenance work, so as to better play performance and extend the service life.

1. Keep dry

The feet will sweat during skating, sweat in the ice shoes, and sweat acid will corrode the dermis inside the ice shoes, so try to keep the ice shoes dry in the inside of the ice shoes. After skating, immediately dry the inside and outside of the ice shoes with a rag or paper towel.Then place the ice shoes in a ventilated place so that the ice shoes can be completely dry.Do not put the ice shoes in an impervious locker or car trunk after skating.

2. Plim oil or care agent on ice shoes

If your ice shoes are leather, occasionally oil or leather care agent is used for ice shoes, but don't put too much.Too many nursing agents are easy to soft leather.

3. Use the net pocket ice shoe bag

Don't use closed ice shoes Bags, or your ice shoes can never be dried. Bags with ventilated Bags with a grid pocket can make ice shoes faster.

4. Blind shoes are covered with a protective cover when not in use

After the ice knife is covered with a protective cover, it can not only better protect the ice knife, but also prevent the ice knife from accidentally scratching yourself or others.

5. Keep ice shoes clean

Wipe the outside of your ice shoes regularly with a wet cloth. If you do not wipe the dirt, use a little gentle cleaner to add water.

6. Regular ice knife

The newly bought Ice knife shoes should be grinded with a blade. After a period of time, you should also grind the knife regularly. When you fall into the ice, the ice knife is not so comfortable, the ice knife should be grinded.record the skating time between the two grinding knives (calculated in hours).Soon you will find how long you can slip after each grinding knife, which helps you to avoid the embarrassment of the ice knife in the critical moment (such as the game or performance).Generally speaking, the average skating should be grinded once after 20 hours.

7. Pay attention to the braking method

The brakes are very often moved during skating. In order to protect the ice knife, the method of braking can be changed. You can make one -foot snow, T -shaped, or tango stopping.

8. Avoid rust of ice knife

The largest ice knife killer after the ice is much softer than steel. When a certain part of the ice knife is rusty, don't want to let it restore the original state, and the rusty parts can no longer press the blade.Therefore, try not to let the ice knife rust. Each time you get the ice, you must dry the ice knife. Before wearing a knife cover, wipe off the "snow" on both sides of the ice knife with two fingers, and then carefully wipe the knife's slot with your fingers.

1. How much is the price of speed skating?

Ice knife shoes can be divided into three types: ice hockey ice knife, speed skating knife, and figure -like ice knife. Speed skating knife shoes are ice -skilled Ice knife shoes. How much is a pair of speed skating knife shoes?

The price of Ice knife shoes is relatively high. Generally, the speed skating skate shoes are composed of four parts: ice knife, ice shoes, screws, and laces. The specific price is affected by various factors, including brand, place of production, material, workmanship, size, etc., which is a bit cheaper.Children's Ice knife shoes, the price is about one or two hundred yuan to 700 yuan; the Ice knife shoes worn by adults are generally more expensive, from one or two thousand yuan to tens of thousands of yuan.Customized, the price is higher.

Note:The above price source network is for reference only.More ice -shoes price reference & gt; & gt;

2. How to buy high -quality Ice knife shoes

The price of Ice knife shoes is relatively expensive. There are many Ice knife shoes on the market. When buying, you can start from the following aspects to select high -quality Ice knife shoes:

1. See if the knife is straight

Pour the ice shoes and raise the blade upwards, the shoe mouth facing down, and see if the knife body is a straight line with one eye, the better the knife body.

2. See if the blade has a deep cut mouth

If there is a deep cut of the blade, it will affect the ice effect during skating. Therefore, when buying Ice knife shoes, you should try to choose the shallow cutting knife.

3. Is the connection position of the ice knife and ice shoes reasonable?

Generally, the flower -like ice shoes are vertically looking at the ice shoe. The ice knife should be located in the middle of the ice shoes. The left -foot knife of the speed skates is slightly turned about 15 degrees to the left side.

4. See if the ice knife is bright

Some ice knives are rust on the surface of the knife due to poor steel or silver plating. The silver plating has a falling phenomenon. A good ice knife should be very bright and the surface is not rusty marks.

5. See if the size is appropriate

The ice shoes number must be suitable for me. It should not be too big nor too small. When testing the shoes, you should loosen all the shoelaces and then tighten them in order. You must be sure that the number is suitable to buy.

Third, the more expensive to buy Ice knife shoes for novices, is it better?

For novices, the more expensive it is, the better it is.

The most expensive ice knife can not make you a master of skating. Moreover, the more expensive the ice knife is, the more sharp the design of the knife teeth. It is suitable for the skilled skaters.Choose the right one according to your ice skating level.

1. What is the structure of speed skating knife and shoes

One of the most important equipment of the skating project is the ice knife on the feet. The structure of the ice knife of different ice skating projects is also different. Speed skating knife shoes are ice -knife shoes worn on speed skating. There are two types of short track speed skating and avenue speed skating. TheyAlthough there is a large difference in appearance, its structure is basically the same, mainly consisting of the following parts:

1. Ice knife:Speed skating emphasizes the speed of gliding, so the ice knife is long, the blade is narrow and flat, and the ice knife of the speed skating knife shoes is only fixed with the ice shoes. This structure can extend the athlete's pedal distance and allow the athlete's ankle activity to increase the amplitude of the ankle joint activity.Large, Smooth exercise.

2, knife support:The knife holder of the speed skate shoes is fixed on the soles of the shoe by two points, which can move the position of the ice knife left and right. Generally, the short -sized skate -shoe ice knife has a higher knife.It will contact the ice surface; the avenue speed skating knife shoes are low.

3. Boots:The boots of speed skating knife shoes are generally made of carbon fiber and thermal shrinkable plastic shoe shells. While reducing the quality of ice shoes, the rigidity is improved, the leg load is reduced, the stability of the support is strengthened, and the stability of the support is enhanced.efficiency.

2. What is the principle of speed skating knife shoes

The structure of the speed skate shoes and the other two types of Ice knife shoes is different, but the basic principles are the same, mainly using ice knife to pedal ice, so as to slide on the ice. The specific principle is:

As we all know, people can walk on the ground because the soles and the ground have friction. The greater the friction, the more stable people can walk.And ice skating is just the opposite, the smaller friction can make the movement smoother.After putting on Ice knife shoes, there is a layer of water in the contact position of the ice knife and the ice surface. This layer of water plays a lubrication effect, so that people can slip on the ice surface. There are several different reasons for the cause of this layer of water:

1. The theory of stress fusion

The ice knife puts a lot of pressure on the ice, which will melt the ice surface and cause a thin water layer.When a person passing by, the pressure on the ice disappears, and the part of the water layer will re -condense into ice.

2. Surface melting theory

In recent years, the physics community has had a lot of doubts about this theory.If the role of stress melted the ice surface, it is obviously unrealistic that the athlete's weight can reach at least 175 kg to provide sufficient pressure, so the pressure effect is not the main reason for the melting of the ice surface.As a result, scientists also proposed the "surface melting theory", and its intention is that the surface of the ice always has a layer of water that will not melt; the higher the temperature, the thicker the water film, it is the lubrication effect of this layer of water.This is also a saying widely recognized in the physics community.

In general, the principle of Ice knife shoes is to lubricate the water film generated by the ice knife melting the ice surface, reducing the friction between the ice knife and the ice surface, so that people can glide on the ice surface.

1. Types of Ice knife shoes

Ice knife shoes are ice shoes worn during skating. The skating items can generally be divided into three categories: speed skating, pattern sliding and ice hockey. According to the characteristics and requirements of the project, Ice knife shoes are mainly divided into three categories:

1. Speed skating knife and shoes

Speed skating knife can be divided into two types: "Avenue Speed Slipper" and "Short -track Speed Slipper". Avenue speed skating knife knife is long, with a narrow blade, large ice area, small friction resistance, and short shoes.It is convenient for athletes to reduce their physical focus and reduce air resistance.

The short track speed skating knife is short, with arc at the bottom of the blade, and the area of contact with the ice surface is small, which is convenient for athletes to advance the arc when the athletes are on the curve. At the same time, the body of the ice knife is higher.In contact with the ice, most of the swords of the special sprinting channel are mostly mobile, for athletes to choose from their own habits and preferences.

2. Ice cock

The height and shortness of the ice hockey knife, short, large arc, thick blade, and the mid -range curved transitions smoothly to both ends, which can prevent slipping to the greatest extent to adapt to the characteristics of fast project rhythm and high resistance.It should be noted that the ice -hockey goalkeeper's ice knife is different from other athlete ice knives. It is made of all -metal and the knife is short. This design is to avoid missing the ball into the net.

3. Flower skating shoes

The sword of the flower sword is generally short, but it is slightly longer than the ice hockey knife. There are several ice teeth at the front of the blade, which is convenient for players to control the balance.At the same time, flower skating shoes mostly use high -shoes waist design to provide sufficient support during jumping.

Fantastic ice knives and shoes are different according to the requirements of amateur and professional, and the methods are also different. The amateur basically uses a PVC base PVC leather. The professional ones are basically the leather material, and the thickness of the inside is thicker and the hardness is hard.

The difference between three types of Ice knife shoes

The difference between the three types of Ice knife shoes is mainly different design characteristics, which is also the difference between the characteristics of the project:

1. The main feature of speed skating is fast speed, so the speed skating knife knife is very long, the blade is narrow and flat, so that the large friction resistance of the ice area is small, and the waist waist is short to reduce the body's center of gravity and reduce air resistance.

2. The ice hockey project is very confrontant. Therefore, the toe of the ice and soy shoes is very hard, the waist is high, the shoes are very thick, and the knife of the ice shoe knife is very short.

3. Falter skating movements are difficult to move and have higher requirements for stability. Therefore, there are grooves in the middle of the blade, and the knife body has arc to facilitate the turning of rotation and footwork.

What are the materials of Ice knife shoes?

The ice knife of Ice knife shoes is relatively sharp. It is generally made of steel. Its material mainly has the following:

1. Carbon Tool steel

Carbon Tool steel is generally used by beginners. Different quality ice knives depends mainly on carbon content. Although the hardness of the ice knife used in the same project meets the same standards, due to the different Levels of steel, under the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, compared with the same conditions, it is compared to comparedHigh -level steel will keep the life of the edge of the ice knife longer.

2. Stainless steel, high -grade carbon steel or high -speed Tool steel

Generally used for skilled or intermediate enthusiasts, the ice knife has a high level of steel, it has strong corrosion resistance, and can improve the frequent jump and rotation of the skaters.This type of ice knife is usually plated with a titanium compound on the surface. After being polished, the maximum hardness on both sides can Dalo Hardness 85, which reduces the friction between the ice knife and the ice.Essence

3. Powder alloys and coating high -speed steel

Generally used in international competition, ice -knife shoes used in international competitions, their ice knives generally have basic essential characteristics such as wear -resistant, corrosion resistance, working surfaces for different ice surface hardness, frequent jumping, sliding, and not easy to connect to the sole welding.The coating high -speed steel is characterized by a thin titanium naineride or titanium carbide on both sides of the blade. The overall blade uses dual metal composite steel.After grinding and grinding, high hardness is formed on both sides. The roughness is like a mirror blade, which greatly improves the life of the ice knife blade without reducing the toughness of the ice knife.

4. Powder metal Tool steel

It has absolute optimal slippery and wear -resistant performance, and only a few companies in foreign countries are produced.