1. What light is suitable for the study?

1. table lamp

LED light sources in the study are relatively common.However, the bad LED light source may have a glare, and it will have a bad effect on the eyes. Therefore, when choosing the LED light source, you must be very careful.

2, ceiling lamp

The lighting of the study is not suitable for too large, nor is it suitable for too small.The main light can be used to use the ceiling light.

3, floor lamp

If you have a reading sofa chair in the study, you can place a floor lamp next to the sofa to provide local reading lighting.

4. Shooting Lights

Small shooting Lights can be installed in the bookcase, which can be decorated with bookcases, which is also convenient to find books.

2. How much watt is fit for the study?

Generally, the lamps of the study are almost about 40 watts.

3. The main points of design of the study

1. Add table lamps to the desk to strengthen reading lighting

If you want to sit in front of the desk, only indirect lighting is not enough. It is best to set up a table lamp at the corner of the table, or set up a Hanging lamp on the top of the table for key lighting.Especially when there are children in the home, in addition to the desk design must be adjusted with it, at the part of the local light source on the desk, it is best to choose an electronic table. It is best to try whether there will be flashing before purchasing.The situation occurred.

2. indirect light source to enhance the quiet atmosphere of the study

Indirect lighting can avoid the visual dazzling damage caused by direct light radiation, and it is a bit tired to turn the Lights on the light, and it will not want to be in this space for too long. Thinking is not easy to concentrate.Therefore, in designing the study, it is best to treat the indirect light source, such as the hidden light source around the ceiling, so that the calm atmosphere of the book can be set up.

3. Use rail Lights to direct bookcases to create visual scenes

Bookcases can also create interesting effects through light changes. For example, through the design of orbit Lights or embedded lamps, let the collection or items on the bookcase on the bookcase change the visual focus of the end view.

4. Aversion of light source direct computer screen

Because the computer screen itself will emit strong light, if the light of the space is too bright, it will reflect on the screen, the eyes are easy to be uncomfortable, and the words on the screen cannot be seen.But if the computer screen is only on, and the surroundings are darker, the vision is prone to fatigue.Correct practice: It is not allowed to make the brightness of the two from dark, and the brightness of the two should be similar. When reading the text in the computer for a long time, it is not easy to get fatigue.

5. Keeping natural light is important

The study room is suitable for reading. It is best to build the location of the study in the place where there is a natural light source. Even if it is shared with other spaces, such as the master bedroom or the corner of the living room, the location of the desk is best to be close to the window.In addition, the design of the study of the natural light source can be adjusted through the design of the shutters.

Most of the study decorations are elegant and quiet, giving people a quiet and calm feeling. Only in this way can it be more suitable for quiet reading.The design of the study of the study is the focus of the study in the study. Similarly, the lighting design in the bedroom, living room and other rooms also deserves our attention.

1. What is special lighting

Special lamps are lighting appliances applied under special lighting conditions, such as in the environment of explosion -proof and anti -static, these special environments have corresponding technical requirements.

2. Types and applications of special lighting

1As well asProjection lamp lighting

Light projection is the use of Outdoor projection dedicated equipment, using the principle of optical projection, and using high brightness light sources to project the content on the wall of the building wall, so as to form an image technology.This technology can be applied to the Outdoor environment: the exterior wall of the building, the public building, the stadium, and can also be used in the indoor environment, such as large exhibition halls, museums, theaters, warehouses, etc.

2As well asOptical fiber lighting

The application method of optical fibers in lighting is divided into two types, one is the endpoint glow and the other is the body glow.The part of the endpoint luminescence is mainly composed of two components: optical projector and optical fiber.The projection host contains light sources, reflexes, and color filter.The main purpose of the reflector is to increase the strength of the light, while the color filter can be evolved in color to transform different effects.Body light is the optical fiber itself, which will form a flexible light strip.

3As well asoptical fiberWater view lighting

Because the fiber has the characteristics of hydrophilicity and its optoelectronic separation, it can easily create the effect of the designer in terms of lighting, and on the other hand, it does not have the problemConsultation.In addition, the structure of the optical fiber itself can also be matched with the pool, making the optical fiber body also a part of the water scene. This is an effect that other lighting design is not easy to achieve.

The lighting of the pool is also popular nowSPAThe lighting of the occasion and the application of optical fiber can be said to be the best choice.Because this is the place of human activity, the consideration of security is much higher than the above pool or other indoor places. Therefore, the optical separation characteristics of the optical fiber itself and the diverse color performance effect of color can also meet the needs of this type of place.

1. What are the composition of the ghost lamp?

HID pillar lamps are generally composed of lamp head (pyrine bulb), electronic rectifier (also known as stagger, stabilizer, fire cow, etc.), line group control box, etc.

1. Lantern head

There is no filament at the HID blealing lamp head. The current uses a current between the electrodes to promote the brightness of the pyrum molecules to generate brightness. There is no problem of tungsten filament burning (none of the tungsten wires can be called a pyrine lamp).

2. Electronic rectifier

After using the DC voltage of the battery 12V, after a series of conversion, control, protection, voltage voltage, frequency conversion and other actions, it generates an instant 23000V ignition high voltage to ignite the lamp head.There are about 4A working current.

3, line group

Generally made of flame retardant materials. By increasing the cross -sectional area of the power cord, the current passing capacity is improved to ensure the normal work of the HID pyrine lamp. Some H4 models of the airlight lamp with the relay line group for work control.

2. How to install the ghost lamp

First of all, take off the front lamp before, and then find the same type of hernia bulb as it.And before installation, install a stable, which is conducive to the stable operation of hernia lamps.Then lead the light line in the car out of the dust cover. Because most of the cars have gaps, the sealing work needs to be done after the leading line, so that the hernia bulbs are installed.

In fact, the installation of hernia lamps is simple and the operation is not complicated.However, in order to drive in the future, it is recommended that you find professional personnel for installation.