1. What types of hooks

The adsorption method can be divided into:No trace hook, suction cup hook, ordering hook, sticky glue hook, etc.

1. No trace hook: A kind of environmentally friendly hook that does not produce traces in the veneer and does not damage the veneer.

2, suction cup linked: use the suction cup to tightly adsorb the hook on the wall.

3. Ordering hook: With nails, add nails into the hook of the wall.

4. Adhesive hook: Traditional hooks, adsorb the wall with sticky glue.

According to the material, it can be divided into:Wood hooks, plastic hooks, iron hooks, etc.

1. Wooden hook: The linked material is mainly wood.

2. Plastic hook: The hook material is mainly plastic.

3. iron hook: The linked material is mainly metal.

two,How to choose a hook

1. Select the material

The linked material directly affects its support.The decorative hooks generally have four commonly used materials for wood, plastic, iron and resin. The titer linked support is the highest, but it is easy to rust; several other materials are relatively low, each with its own characteristics, you can have your own characteristics.According to the actual use of the material, the material is selected.

2. Choose adhesive method

Decorative hooks can be divided into non -trace hooks, suction cup hooks, order -linked hooks, adhesive hooks, etc. The hook of no trace and suction cups will not leave traces on the adhesive surface, but it is not stable enough;The sticky glue hook is relatively stable, but it will leave traces on the adhesive surface.Buyers can choose the right link according to actual needs.

3. Check before buying

When buying, check the hook. First, check whether the linked is complete, no cracks, and damage; the second is to test whether the hook is firm, like suction cups and no trace hooks. You can hang up and try the effect first.

1. Types without trace hooks

1. The suction cup type without trace hook

Using the physical effects of atmospheric pressure, the non -trace hook, this kind of non -trace hook is relatively simple, and strictly requires strict requirements on the surface, and there are two possible problems due to the relationship between time and thermal expansion and contraction: the adsorption is not tightly tightAnd should not be removed.

2. Adhesive gum -free hook

The advantages and disadvantages of the effect of chemical adhesion and a hook product produced mainly depends on the quality of the adhesive.However, if the stickiness is not high, the stickiness will not be firm. If the stickiness is very high, there will be viscosity residues left on the wall when removing.And because the adhesive -free hook hooks are hooks that produce effects in chemical effects, they are more sensitive to water and temperature. In the special environment of water vapor and temperature such as bathroom and kitchen, it is easy to produce and fall off.

3. Easy -to -use hook

Easy -to -use hook hooks also belong to a sticky glue -free hook. This type of sticky glue has two technical characteristics.

Technical features: The principle of sensory pressure adhesion.First of all, the viscosity of the easy -to -use adhesive tape is based on sensor pressure adhesive technology, that is, it is necessary to apply pressure to the glue strip slightly when used to make it more fully contact with the wall.Normal use (special attention to different load -bearing range of different gums), the sensitive rubber strips make the loader Hanging longer, but the tighter it will stick to.

Technical features: Elastic extension technology.Sensor sticky glue is designed to make the glue stick firmly on the wall, and the elastic extension technology is designed to make the rubber strip from being smoothly removed on the basis of the wall.When you want to remove the easy -to -use hook, as long as you gently stroke the ends of the back seat, stretch the adhesive bars down vertically. According to the principle of scissor distribution, the viscosity on the rubber strip will disappear instantly.

It is easy to solve the problems of the previous two types of non -trace hooks, which cannot be taken, and cannot be taken down. The non -trace storage is completely an act that is convenient for everyone to operate without becoming a project.But the disadvantage is that the operation steps are cumbersome and strict, and the operations are prone to fall off.

4. Moving without trace hook

Moving without trace hooks are a compound hook. Three working modes of sticky glue, friction, and atmospheric pressure are combined to become a kind of waterproof without marks, and the gravity of remote reuse (exemption of glue) is strong.The stains of the surface can also be water.It can be said that the mobility -free hook makes the storage more convenient and casual.

2. How to use without trace hooks

1. When preparing to use no trace hooks, first check the external packaging carefully. Generally,No trace hookThe way and steps of use will be explained in detail in detail.

2. Open the packaging, take out the traceless hook and no trace tape (special attention, the point is the non -trace tape).

3. Pay attention to the protection bar on both sides of the free waterproof rubber strip. The protective bar on one side is unveiled and the post is directly sticking to the back of the hook.(Do not unveil the other side for the time being).

4. Since the rubber strip is a waterproof rubber strip, the positioning position is also in a humid and high temperature environment such as bathroom or kitchen. If it is in the bathroom, please open the shower with the temperature of the bath water and rinse the wall with water.After the wall has a certain temperature, turn off the shower.Wipe dry the wall first, wipe the wall with the alcohol cotton strip attached to the package, and then dry it with a hair dryer.(This step is very important when installing waterproof glue).

5. Open the protective bar on the other side, and then stick to the wall directly on the wall.Remove the separate hook (the hook is pushed up and it can be removed, and the rubber strip and back plate are still sticking to the wall), and then press the back plate on the wall with your hand to make the rubber strip evenly stress.

6. Then hang it with no trace hook for 24 hours, so that the sticky glue can be used normally (please pay attention not to exceed the bearing bearing of the non -trace hook standard).

7. The process is relatively simple.Remove the hook (keep the back plate and the tape on the wall), stretch the rubber strip vertically, until the back plate falls off.

three,Pay attention to the use of no trace hook

1. Try not to exceed loading.

2. Let the rubber strip adapt to the environment before use (first use the water with a certain temperature to wet the wall, then dry it, and then wipe it with alcohol cotton strips and blow dry).

3. Press the pressure evenly.

4. When removing, pull down the vertically and pull down to prevent the rubber from being pulled off (if it is pulled, please use a hair dryer to blow the rubber strip, and then pick up a section to continue stretching).