[Infrared knee pads] Is the infrared knee pads effective in treating arthritis?

Is infrared knee pads effective for arthritis?

Infrared is a ray that is the best in all sunlight into the Skin and subcutaneous tissue.Because the vibration frequency of far -infrared and the cell molecules in the human body is close, after the "Light wave of life" penetrates into the body, it will cause the atom and molecule of human cells to resonate.Deep temperature rises and the microvascular expansion is expanded to accelerate blood circulation.

Far -infrared spontaneous heating knees, using the full computer double -dimensional stereo weaving technology. The outer layer is fully woven by 100 % light. It not only has delicate appearance, soft touch, rich color, good breathability, and especially thermal warming performance.The inner layer (contact with the Skin layer) is 100 % far from infrared negative ion energy fiber. This energy fiber can effectively alleviate symptoms such as joint pain and muscle soreness caused by joint pain and rheumatism.It has excellent effects on preventing rehabilitation rheumatoid arthritis and paralysis of hands and feet.In conjunction with Kable patented technology, silicone non -slip particles, so that the products are not easy to fall off during the wearing process.At the suture of both ends, unique explosion -proof side technology is used, even if pulling is pulled, it does not deform and loose.Far -infrared spontaneous heating knee protectives are more suitable for patients with rheumatism and rheumatism, such as rheumatism, such as rheumatism, and other patients with knee pads or knees suffering from trauma.Suitable for rheumatism, rheumatoid arthritis, cold arthritis, joint water, Bone spurs, arthritis pain, knee arthritis, Bone hyperplasia, knee -knee cooling, leg muscle soreness and other symptoms, infrared knee pads to treat arthritisHave a certain auxiliary effect.

Turkey method to treat arthritis

I. 30 grams of astragalus, 10 grams of ginseng, 12 grams of atractylodes, 10 grams of angelica, 10 grams of Xianmao, 30 grams of Sisi, 10 grams of Xianling spleen, 15 grams of white peony, 30 grams of chicken blood vine, 15 grams of Wei Lingxian, 15 grams12 grams of self -defense, 15 grams of Guizhi, 10 grams of licorice, 10 grams of ginger, 5 jujube.A whole compalation of warmth nourishing liver and kidney, strengthening the spleen and qi, dispersing cold, dehumidification, removing blood stasis, and pain.

Second, Sichuan Wu porridge ingredients: 2 grams of Sichuanwu, 10 drops of ginger juice, 30 grams of japonica rice, an appropriate amount of honey.Cooking method: At the end of Sichuan Ukraine, wash the rice, put in the tile pot, add an appropriate amount of water, add Chuanwu after boiling, cook with a text fire for 2 to 3 hours, add ginger juice and honey after the rice is rotten, stir itEvenly, just boil for 1 to 2.How to eat: Said meals and take it with measuring.

Third, Achyranthes bull -bull lees, raw materials: 500 grams of Achyranthes, 1000 grams of glutinous rice, a moderate amount of sweet wine.Cooking method: Wash the bonus knee first, put it in a casserole, add an appropriate amount of water to cook 2 to 3 times, take part of the medicinal juice soake the glutinous rice.Ferment is a wine slot.How to eat: once a day, take 30 grams of cooking tank each time.

Fourth, 5 grams of pangolin, 10 grams of Bai Wei, 15 grams of Zelan.Total three -flavored medicine.Fry with a pound of rice wine and use low heat.Fry on high heat and fry 15-20 cents with a small heat.Put a little brown sugar, remove the residue to drink, and see the amount of alcohol.Eat at least twice a day and persist.It can put the refrigerator when it is hot, hot wine when eating.

Chrysanthemums

Modern studies have shown that chrysanthemums have the effects of relieving heat, anti -inflammatory, analgesic, and regulating immune function.And the Wormwood leaves are warm, bitter, Xinxin, have warming meridians and relieving bleeding, dispersing cold and relieving pain, removing dampness and itching.It can dispel wind and dehumidify, swelling and pain, and assisting in treating various arthritis, especially for autumn and winter feelings that cause cold pain to cause cold pain as the main mana.

It should be noted that the amount of chrysanthemums of chrysanthemum Wormwood knee and the amount of the two medicines is critical. Different types of arthritis, the proportion of chrysanthemum and Wormwood leaves are different.His manifestations of joint pain, local burning redness, pain cannot be touched, joint activity is unfavorable, and arthritis with symptoms such as fever, thirst, dullness, yellow -dry moss, and pulse number of Chinese medicine belongs to the fever of Chinese medicine.2: 1 ratio to match the ratio.

It is manifested by the pain of the limb joints. When the temperature is low, the pain is intensified, the temperature is relieved when the temperature is high, the joints cannot be flexed and extended, the local Skin color is not red, and it is not hot or even cool.Symptoms such as thin tongue coating and tight pulse strings belong to the cold paralysis of traditional Chinese medicine. Chrysanthemum and Ai leaves should be matched with a ratio of 1: 2.If the symptoms of cold and heat are not obvious, the ratio of chrysanthemum and Ai leaf 1: 1 can be used to match.

[What are the effects of far -infrared knees] The working principle of far -infrared knee pads is used

What is the effect of far -infrared knees

Far infrared knees are one of the far -infrared protectives series. After nearly a hundred materials improved, the bamboo charcoal fiber and protective gear embroidered needle were successfully woven, and it was first upgraded from sports protection function to dual effects of health and sports protection.It has a fixed and protective effect on joints and muscles. At the same time, it can effectively reduce pain and achieve the purpose of anti -inflammatory and swelling.

Far infrared knees introduce German technology, micro -powdery treatment, and add BCP ingredients to produce a thermal effect ring of about 2cm, which is comparable to 2cm thick wool;, long -lasting effect, has the dual effects of external treatment, which not only protects the knee joint movement without friction and collision, but also against the invasion of cold air. At the same timeStrengthen metabolism; promote and improve blood circulation, can increase body temperature by 3-4 C; play a role in alleviating analgesic, anti -inflammatory, and swelling.At the same time, its meticulous weaving also offset the invasion of the thief wind and reduce the loss of loss of body temperature.This will improve the microcirculation of knees and legs, relieve pain, swelling inflammation, promote fracture healing, and improve knee joint power.

The working principle of far infrared knees

Far infrared knees are first through the human body's own energy to stimulate the bamboo charcoal inside the protective gear far -infrared ions, thereby generating a two -centimeter thick thermal effect ring. Through the Skin, the surface cells and deep acupuncture nerves close to the Skin are fully stimulated.Deeply stimulate the guardian of the guards in the area, accelerate blood flow, promote blood circulation, improve tissue nutrition, thereby achieve the effect of acting qi and promoting blood and strong physique.

What are the benefits of far infrared on the body

1. Make moisture activity and improve the oxygen content of the body

About 70%of the human body is moisture, and the blood ratio of blood is as high as 80%.If the blood gas is insufficient, the water molecules in the blood gathered into inert water (that is, the combination of four hydrogen molecules and a oxygen molecule), and cannot pass the cell membrane.Far -infrared rays can resonate water molecules, become independent aquatic molecules, improve the body's oxygen content, cells can restore vitality, more vigorous spirit, and more flexible mind, which can improve disease resistance and delay aging.

2. Improve the microcirculation system

Independent aquatic molecules can freely enter and exit cells, and then transform into heat energy through resonance and resonance, which increases the deep temperature of the subcutaneous deeper, accelerates blood flow, and the microfiler vascular expansion.Decreasing, the function of microfilar blood vessels is to supply oxygen and nutrition to the human body 60 mega cells, and at the same time excrete the waste produced by metabolism.If the microcirculation system occurs, it will lead to a variety of problems, including hypertension, cardiovascular disease, tumor, arthritis, and cold limbs.The total length of adult microcosis can surround the earth for three weeks and is called the second heart of the human body. It can be seen that it is important.

3. Promote metabolism

If the microcirculation system is improved, the waste produced by metabolism can quickly discharge the in vitro and reduce the negative boldness of the liver and kidneys.These wastes include heavy metals that cause cancer; fatigue and aging lactic acid, free fatty acids and subcutaneous fat; uranium ions that cause hypertension, and uric acid that cause pain.

4. Balance the body of the body

Far infrared rays can purify blood, improve Skin quality, and prevent Bone joint pain caused by high uric acid.

1. The difference between the soft shell and the hard shell of the Assault pants

The version of the soft shell Assault pants and the hard shell submachine pants are very different.

1. Different uses

The original use of soft shell was used as Rock climbing and ice climbing clothing, and was later accepted by other types of outdoor activities. Its characteristics were soft and closed, and the tops were mostly short jacket styles.soft shells are usually used as two layers, and the existence of the middle preservation clothing is not considered.

The hard shell is also known as the commonly known charge. It is used as the outermost isolation layer and protective layer in outdoor activities to prevent the invasion of bad climate factors such as wind, rain, and snow, while ensuring that it has relatively good breathability.

2. Different performance

soft shells are usually softer than hard shells, and some fabrics also have certain elasticity.Windproofing is the necessary performance of all soft shells. Secondly, some soft shells compose together with a certain thickness of the chorine grip layer, and have moderate warmth performance.There are also some soft shells in the fabric that combined with waterproof and breathable membranes into waterproof soft shells, which can usually reach the level of anti -medium rain.The soft shell also has DWR water -proof coating.

For those who do nt know Outdoor equipment, they basically have a misunderstanding. It is believed that the jacket (hard shell) itself will have a very good thermal insulation effect. This is a very serious fallacy. In fact, it is just a layer of chemical fiber."Thin Skin", does not have any insulation.However, because the hard shell has good isolation and windproof performance, it can prevent or slow down the air fluidity between the hard shell and the body, and avoid the production of air -cooled effects.

Second, the fabric structure of the hard shell jacket

Due to the different needs of the user, the environment of the hard shell can be subdivided into three types: three -layer structure, two -layer structure, and two -layer and semi -structures.

1. Three layers of structural fabrics: from the outer layer of the nylon, the waterproof and breathable film, and the inner layer of the nylon protection to the overall fabric.The advantage is that it is thicker and has good wear resistance and durability.The disadvantage is that the weight is large, the hardness is high, and the price is more expensive.Therefore, it is mostly used on top professional hard shells and is suitable for the extreme environment.

2. Two layers of structural fabrics: The outer layer of the nylon is tightly pressed with the waterproof and breathable membrane, and the inner layer is equipped with an independent protective net lining.The price of two layers of structural fabrics is relatively low, easy to process, and has good touch and comfort.The disadvantage is that wear -resistant, poor durability, and unsatisfactory storage.Two -layer structure fabrics are mostly used in non -limit environments, and the hard shells of Outdoor leisure activities are located.

3. Two -layer semi -structural fabric: It is also composed of the outer layer of the nylon and the waterproof breathability film. It is sprayed with a very thin PU protective layer on the inner side of the waterproof and breathable membrane.The advantage is relatively soft and lightweight, small storage volume, and because the thickness of the fabric is thin, so the breathability is better.However, the disadvantage is that the fabric is abrasion-resistant and durable, especially the PU surface of the inner PU surface of the fabric is not well protected. It is prone to damage under large intensity conditions.

Each fabric structure has its own characteristics. When we choose charge fabrics, we can choose according to different requirements. It is best to prepare a few charge jackets with different fabric structures to prepare various needs.

What are the outdoor sports lighting equipment

The headlights (it can make you get out of your hands, it is very convenient)

Flashlight (as a spare lighting, it is still better)

Camp Lights (use in camps or in tents, the effect is very good)

Fluorescent sticks (have a certain effect, just don't throw it around, not environmentally friendly)

Wind -proof lighter (not small, good lighting during emergency)

waterproof match (also for emergency)

precautions

Fluorescence, do not throw it out of environmental protection

Pay attention to fireproof use of match and lighter.

Which Outdoor flashlight is better

1. It does not require too high brightness on Hiking. Due to the long time, you can choose a lightweight flashlight as much as possible. At the same time, you must have a longer battery life.In general, flashlights need to take into account the moderate concentration and pan -light.Therefore, it is best to hike the flashlightThe weight is about 100g, and the battery life is several hours.

2. The global light used by the Camping must be good, and the demand for brightness is low, but you need to choose a flashlight with a long battery life.The evidence has enough brightness and long battery life.It is best to have a flashlight that can reach more than tens of hours, so as to prepare for more than one week in extreme cases.

3. The problem that must be solved first outdoors is waterproof. The reassuring waterproof standard is of courseIPX-8, this level of waterproof can protect the rain and soak at no more than 2 meters.But this waterproof performance is a joke when diving.

4. Diving flashlight emphasizes absolute waterproof and reliability. The requirements for brightness are also high, and the lighting time is enough.The switch should be able to resist water pressure.In addition, it is best to prevent the hand rope from locking the function to prevent accidents from falling off.

5. The environment corresponding to the cave is more sinister, and the rock reflectivity in the cave is low, so the brightness must be high!There is water in the cave. Generally, the flashlight is required to have a good waterproof characteristics. At the same time, the possible dangerous situation of the perception requires that the flashlight should be solid and durable, which can withstand the impact and fall of stones without damage.

6. The current Outdoor flash bulb is generallyLED, long life and high brightness.Of course, there are non -LED bulbs, and even halogen lamps, but these are used for special uses or special environments.We only introduce LEDs here, and LED chose American Cree.Divided into many models, as follows:

XRE's level is P3 P4 Q2 Q3 Q4 Q5 R2

XPG's level is R3 R4 R5 S2 S3

The level of XML is T4 T5 T6 U2 U3

What kind of flashlight do I need to use outdoor sports?

The better, the better.The common on the market is:XRE Q5-WC, XPG R5-1A, XML T6-1b, etc.We recommend that you choose R5 or above T6.The most cost -effective.A R5 LED light requires more than 20 yuan. Therefore, if you see the entire flashlight only sold for less than 30 yuan on the Internet, let's forget it.

The battery is related to the battery life and safety of flashlights. It is very important.Remember, unless you really understand the truth in it, choose18650 lithium battery.The 18650 is the most electrical density -density, which can be used for the battery cell used in the laptop.The size is small and light, the use is wide, and the price is cheap (about 30 yuan).

How to choose Outdoor Camping lights

The Camping light should be relatively lighter and strong, and at the same time, the comfort of the shell feel should be considered. It will not be easily fell down in the hand and will not be burned to our hands.When choosing, you can hold it in our hands.

There are two types of energy sources and batteries for Camping lamps. Which one can depend on their needs, but the prerequisite work must be done well. Do not forget to be fully charged before going out. Whether the battery can be used.Essence

Camping lights on the market are divided into three types: suspension, magnetic suction, flat.There are also adaptable tripods in the flat release, which can ensure that more space for activity can be illuminated on the ground; the magnetic form is basically perfectly realized where to put in where to suck;You are bright.As for which form you like, I can only say that Ren Jun chose, and there are many Camping lights that are combined in three forms.

How to choose Outdoor headlights

1. Waterproofing:Hiking on Outdoor Camping or other night homework is inevitable to encounter rainy days, so the headlights must be waterproof.When buying headlights, you must see whether there is a waterproof logo, and it must be greater than the waterproof level of more than IXP3. The larger the number of waterproof performance, the better.

2. Anti -falling:A good performance headlight must have anti -falling (impact resistance). The general test method is that the 2 -meter height is free to damage. Therefore, you must also see if there are anti -fall signs when buying, or ask the owner of the ownerThe anti -falling nature of the headlight.

3. Cold resistance:The main outdoor activities of the northern and high -altitude areas, especially the headlights of the split battery box, such as the headlights using inferior PVC wires, then it is likely to cause the epidermis of the wires to become crispy due to cold.Core breaks.

4, light source:The most common light sources in Outdoor head lamps are LEDs or pyrine bulbs.The main advantage of the board is long range, strong penetration, and the disadvantage is that the relative power consumption and the life of the bulb are short.

5. Circuit design:Determine whether a headlight is energy -saving mainly depends on the circuit design. The efficient circuit design reduces power consumption, which means that the same battery is the same brightness.

6. Materials and workmanship:A high -quality headlight must use high -quality materials. At present, most of the high -end headlights use PC/ABS as shells. The main advantage is that it is strong and impactful.Plastic materials.In addition, the selection of the headband should choose good elastic, comfortable feel, sweat -absorbing and breathable, even if we wear it for a long time, you don't feel that dizziness is uncomfortable.There are trademarks on the headband of the brand headlights on the market. Most of these headbands are selected.It also depends on how the workmanship and whether the battery is convenient.

7. Structure design:When choosing the headlights, pay attention to the above elements depends on whether the structure is reasonable and reliable, whether it is flexible and reliable to adjust the lighting angle when wearing it on the head, and whether the power switch is convenient to operate; and if you put it in the Backpack, will you have no intention of unintentional?Open in China.

Recommended reading

[Outdoor Survival tools] What are the indispensable tools and knives for Outdoor survival tools in the wild

How to choose Outdoor multifunctional tools to choose ultra -practical and portable Outdoor knives recommendation

How to use the method of use and the principle of technical principles of firestone

How to choose the types and characteristics of Outdoor water purification equipment Outdoor water purifiers

What kind of items should I be equipped in the wild survival box?

[Pointing North Needle Knowledge Encyclopedia] Differences of the northern needle icon icon northern needle and the compass

What are the must -see Outdoor emergency communication and positioning methods for Outdoor communication equipment

What are the essential items and tools for Outdoor expeditions in the wild adventure Tool

Various uses of ropes in Outdoor survival to see how ropes become "help" outdoors

How to buy Outdoor Telescope for Outdoor Telescope

Outdoor first -aid drugs list common Outdoor first -aid package drugs

principle of automatic inflatable life jacket

This kind of life jacket is made of high -intensity Waterproof material. The inflatable life jacket is composed of sealing inflatable vest, micro -pressure gas cylinders, and fast inflatable valves. It is often used in the possibility of falling into the water.

Under normal circumstances (not inflatable), the entire inflatable life jacket is Hanging on the back of the shoulder like a strap. Because the volume is small, it does not hinder people's homework.At all times, or automatically expand and inflatable (automatic inflatable life jacket) according to the action of water, or by pulling a cable (manual inflatable life jacket) on the man-charged air valve, it can be inflated into 8-15 kg of buoyancy within 5 seconds.Safe clothes; life jackets hold up the human body upward, so that the head and shoulders are exposed to the surface, so as to obtain safety protection in time.

The automatic inflatable life jacket will soften the water sensitive element in the automatic device after the water is immersed in the water after falling into the water, loses the needle in the needle, and the spring stretchs pushes the piercing needle to pierce the cylinder sealing film carbon dioxide gas to fill the airbag and generate buoyancy.

How to use automatic inflatable life jacket

1. Check before wearing

(1) Check whether the life jacket is damaged to ensure that the life jacket has no cracks or thorns.This type of damage on the outer cover indicates that the inflatable gas chamber may have been in contact with the parts that cause damage.If these flaws are found, you cannot continue to use it before the maintenance test.

(2) Check the status of the automatic inflatable device. The indicator components of the automatic inflatable device will inform you whether the automatic inflatable device has been properly installed.Please refer to the inflatable device indicator component inspection instructions near the automatic inflatable device.

(3) Check the carbon dioxide cylinder. When the automatic inflatable device works, the cylinder equipped with carbon dioxide gas will ventilate the life jacket.The size of the installed carbon dioxide cylinder needs to be checked correctly and has not been used before.When checking the cylinder, unscrew the cylinder and observe the screw mouth plane.There are no components that display the interior gas on the steel cylinder.If the screw mouth plane is damaged, the cylinder needs to be replaced.Refer to the specifications of the homepage product specifications to select the proper size of the steel cylinder, including the size of the threaded mouth and the weight of the interior carbon dioxide.If the cylinder is normal, it is necessary to correctly return to the automatic inflatable device.Additional instructions for CO2 steel cylinders:

Before installing the CO2 cylinder, the automatic inflatable device without proper installation will cause an immediately inflatable.

CO2 steel cylinders can only be inflated once and cannot be used again.

The protective plating layer of the CO2 steel cylinder may be corroded after placing the environment or for a period of time. At this time, the CO2 steel cylinder will begin to show some signs of rust.To replace the CO2 steel cylinder.

2. Install and indicate component inspection

The last page of the instructions for use provides the automatic inflatable device for life jackets and then install and indicate component inspection instructions.

3. Putting instructions after inflatable

A plenty of life will be difficult to put on.Exhaust through the mouth blowing Tube until it is easy to wear.See page 4 exhaust description.Put as described above and blow it out.

Before use, practice closed fastening and adjustment steps as follows: Stretch into the left arm first, then reach into the right arm, close the fastener, and finally tighten the strap.

4. Instructions for inflatable

(1) Automatic inflation: Automatically inflatable device after falling water will automatically inflatable within 5 seconds.

(2) Portum inflation: The mouth blowing pipe is located on the left side of the user.Open the left side of the life jacket, pull the mouth blowing duct straight, and blow the air until the airbags harden.If the airbags become softer due to carbon dioxide infiltration (after a period of time, the cylinder gas is lost normally), it is necessary to maintain sufficient buoyancy through the mouth blowing.

(3) Frozen conditions: In the condition of temperature below 40 C, the airbags are not hard. In addition to automatic inflatable, it is necessary to perform mouth blowing.The carbon dioxide gas at this temperature will be longer.

(4) Other inflatable instructions: Be careful not to blow the full filling and use carbon dioxide cylinders to manually inflatable.Repeating carbon dioxide ventilation after mouth blowing will destroy life jackets.You must never use the air pump or air compressor to get angry with life jackets.Carbon dioxide gas loss is more lost than air inflation, so it is necessary to supplement it as soon as possible through the mouth blowing system.

5. exhaust description

Plug the mouth blow valve (at the end of the mouth blowing Tube) with the end of the hood on the mouth blowing pipe. While pressing the port blowing valve, gently discharge the gas from the airbag.Can not exhaust the life jacket airbag.If the mouth blowing valve is kept open for some reason, press the valve multiple times.If it cannot be released, the life jacket needs to be repaired.

6. Other instructions

(1) Unless you are in the cabin, you must put on a life jacket from time to time.

(2) Avoid all unnecessary activities that will wear a life jacket to avoid exposure.

(3) Be careful when used around the sharp object.

(4) If the automatic inflatable life jacket falls into the water or places the inflatable system in an unnecessary water spraying environment, it will cause accidental inflation.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;