raincoat The difference from the rain piping

Rainy coat is a rainpost clothes made of waterproof fabric.The waterproof fabrics suitable for Raincoats include tape, oil cloth and plastic film.Modern raincoat waterproof fabric focuses on breathability, commonly used such as special nylon and GORE-TEX.The breathable raincoat is conducive to people scattered from the raincoat when wearing rain -resistant water and heat, increasing comfort.

Rainy clothing is a product extended from raincoat. It is a rainproof clothes made of waterproof fabric. It is open and has no sleeves.The waterproof fabrics applied to the rainy meseped include tape, oil cloth and plastic film.Modern rain-water waterproof fabric focuses on breathability, commonly used such as special nylon and GORE-TEX.The breathable rainfall is conducive to the humid and humid water when wearing rain -proof when it is wearing rain coats to increase comfort.

Simply put, the rain wear also belong to the raincoat. The rain wess is only a kind of raincoat, but it is just different styles.

Rainy flides are generally used by bicycles, such as electric vehicle rain, bicycle piping, and motorcycle rain. According to the style, it can also be divided into open rain pins, Sleeve rain pins, etc. The general production method of rainy floods is relatively simple, so the cost is relatively low., But the people used are widely used.

Nowadays, the style of raindrops is also diverse, but it is basically the protection of the head of the head. There are Raincoats, helmet -style Raincoats, and so on, so the rain wess is getting better and better.

Rainwear and rain ponchi is a must -have for rainy days. As the saying goes, there are unpredictable winds, so we must also be prepared. We don't have to think of buying rain pits in the rain when it rains.

Split in the cycling raincoat Good or one -sided raincoat

The conjoined raincoat is very good, but the disadvantage is heat and stuffy.

The split raincoat is not hot, and it is convenient to wear it, but waterproof is not as good as connecting.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

How to choose an electric car raincoat

1. The style of electric vehicle raincoat

With the development of modern life, the style of electric vehicle Raincoats is also diverse, including layered Raincoats and pants, automatic drainage helmet electric vehicle Raincoats, and double Raincoats, canopy, and so on.The style of electric vehicle raincoat is convenient and brisk in cycling. It can be comprehensively judged according to its actual needs and prices.

2. The fabric of the electric car raincoat

In terms of the fabric selection of electric vehicle Raincoats, we pay attention to the breathability and waterproofness of the waterproof fabric.At present, the raincoat on the market is a rainpost clothes made of waterproof fabric.waterproof fabrics include tape, oil cloth and plastic film.Commonly used such as special nylon and GORE-Tex.The breathable raincoat is conducive to people scattered from the raincoat when wearing rain -resistant water and heat, increasing comfort.

3. The color of the raincoat of the electric vehicle

The color choice of electric vehicle Raincoats is also particular.The rainy weather is low, so it is best to choose a yellow electric car raincoat.From a physical perspective, the penetration of yellow light is the most.Therefore, many traffic safety reminder facilities are yellow. Choosing yellow bicycle Raincoats can not only make others easier to see you on rainy days, but also ensure the safety of you and others.

Pay attention to electric vehicle rain.

1. The amplitude covered in front of the front.The length can be more effective to block the rain.

2. The pump of the rear mirror should resist pull.Here is where the raincoat is the easiest to be damaged, especially the sea gum raincoat.

3. Whether splashing water cloth raincoat is easy to remove waterproof glue.Judgment method: Tightening the folding pressure. If the inner layer of waterproof glue has obvious creases, it is inferior material, which is easy to remove and pica.

4. Pour waterproof tape to the sewing of the raincoat.The raincoat without waterproof tape must be permeable.

5. It is best to choose a conjoined raincoat to avoid throwing rainwater from the waist. At the same time, it is best to tighten the cuff pants.

6. The fabric must be thicker to prevent the wind from being torn in the wind during high -speed cycling.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

[Anti -static raincoat] Anti -static raincoat material anti -static raincoat principle and misunderstanding

Static electricity can be said to be everywhere in our daily lives. We have a high electrostatic voltage on our body and around, thousands of volts or even tens of thousands of volts.For some special occasions, static electricity may be a fatal harm.Anti -static Raincoats are widely used in the fields of safety protection operations such as power, chemicals, fire protection, and engineering mining. Anti -static Raincoats can better protect our lives.

Anti -static raincoat technology index

Anti -static raincoat strictly followSB/T10284-1997Industry standard execution.Technology reaches the jointKPAimpermeableWhat's more?Fabric30KPaOne hour's impervious waterWhat's more?The color difference is greater than3.0classWhat's more?The intensity of the joint seam is greater than3.8knmEssence

Anti -static raincoat material

Anti -static raincoat uses high -end polyester tower spring Asian spinning and lifting flowersPUFabric,2,5Cm anti -light strip,,Mix a certain amount of metal fibers in the fiber of the workwear to make mixed textile fabrics. This kind of fabric is good and washed.The "Anti -Stroke Working Services" included in the special labor protection supplies catalog (GB12014-1989), Is to prevent the static accumulation of clothes,,The anti -static fabric is sewn as a fabric, suitable for fire or**Put in dangerous places.The production process of anti -static fabrics used is mainly a non -static fiber or anti -static synthetic fiber made of conductive materials made of metal or organic objects using metal or organic conductive materials during textiles.Essence

principle of anti -static raincoat

Anti -static Raincoats use fiber conductivity.Add anti -static agents and carbon black particles to the fiber raw materials of the workwear to make it conductive fiber. Through the method of blending, merging, interlacing, interweaving, or embedded weaving, the conductive capacity of fiber or fabrics is improved, and anti -static and electric fabrics are generated.Realize the charge and dispersal, prevent static electricity accumulation.

Anti -static raincoat use misunderstanding

1Washing Raincoats, because the Raincoats have waterproof and sealing tape. Once cleaning, it will cause damage and falling off, and it will also affect the rainfall effect of the raincoat.

2, Do nt expose the exposure. After the raincoat is used, put it in a cool and ventilated place.At the same time, the rainproof products include coating and waterproof sealing tape, which cannot be close to high temperature and fire. If the raincoat is dirty, it can be gently wiped in the dirt with a wet cloth.

3The thicker the raincoat, the better, many people think that the thicker the raincoat, the better. In fact, this is a misunderstanding!IntersectionIntersectionThickness is the secondary raincoat. The main is the fabric. The quality of the raincoat depends on the fabric itself. The true good fabric itself does not enter the water.

Single electric car raincoatHow to stack

The folding method of a single electric vehicle raincoat is similar to that of ordinary hats. Turn the raincoat and fold the buttons. Fold the two sleeves to the belly.The width of the intention.At this point, the raincoat has grown, and the long strip is 30 % off, which is completed, beautiful and portable.(Note that you must dry and put it before putting it)

pairpeopleElectric carraincoatHow to stack

Double Raincoats are recommended to first have two hats, then fold or put the front hat into the hat behind, and then store like wearing a hat.

Electric car hat raincoat specific superposition method

1. Fold the raincoat hat to the right.

2. Fold the long side of the raincoat to the left.(Key points 1: make the upper and lower sides of the raincoat.)

3. Fold the upper and lower sides of the raincoat to the center, fold twice in total, and turn into a rectangular shape.(Point 2: Keep the raincoat flat when folding, so that the raincoat is convenient to save.)

4. Fold the left and right sides at one third of the three -thirds, and then complete the folding.(Point 3: Finally, fold into a small block or a small rectangle, so that put it in the bag, neither worry about occupying the place, nor is it conducive to the preservation of Raincoats.)

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

[Removal waterfall raincoat] Different from the "water -proof" clothing as a raincoat waterproof fabric and water -proof water -proof fabric

Not to"Anti -splashing water" clothes as raincoat -Talk about the difference between clothing and waterproof and waterproof

Many of the newly entrusted Outdoor enthusiasts saw that they had a newly purchased charge -proof function. As soon as it rained, she smiled slightly and strolled in the rain in new clothes and passed on the rain.I didn't expect to walk and walk, it would be wrong... not to say that waterproof is splashing water?Why is it wet?

actually"Water -proof" and "waterproof" are two different things. Today we will talk about the difference between the two.

In fact, anti -splashing water is often written as splash splash, and in professional terms is also become splash water. English isWater RepelLENTThe abbreviation isw/rEssenceIt refers to the sedimentation of the fiber surface with hydrophobic compounds. The surface of the fabric is left with pores, and the air and water can also pass through. Generally, water droplets are formed on the cloth surface (like lotus leaf).But it is not really waterproof, but to reduce the adsorption of the fabric, so that the water can be "opened" on the surface of the fabric.The water staying time will still penetrate inside.The water -proof effect of the fabric will gradually weaken, or even fail with the use of washing and long -term use.

Take a chestnut with waterproof waterproof/ /Dresses with anti -splattered functions, when the small drizzle under the sky, you can wear a few minutes in the rain, and then quickly shake off the water droplets on the surface of the clothes.wet.The degree of wetness is related to the amount of water drops and the time of stay.

If you see a product page written"waterproof/ /"Anti -splashing", please don't think that you can really wear it to walk in the romantic rain, or serve as a temporary raincoat, because the rain may really pour you through the picture of the product page., The model looks so dry, please believe me, don't look at the advertisement to see the effect!

Let's talk about waterproof, English isWater Resistant/Water Proof, Here should refer to waterproof and humid fabrics, generally refers to making plastic bases on the bottom of the fabric, dividedcoatingandlamination(Layer pressure) Two types.coatingIt is often called coating,laminationIt is a compound Waterproof material behind.Most of the cases use layer pressure (thin film) materials, and there are also various treatment forms such as capsule fiber, tight fabrics, and siliconization (these are also copied by me, the key is to look at the back), and usually in the inner layer of the fabric, which is also the layer of the fabric, which is also the layer of the fabric, which is also the layer of the fabric, which is also the layer of the fabric.People often say "waterproof membrane".The waterproof film compounds the film and other material fabrics by paste the process to form a composite fabric. These fabrics used to compound with the film are not waterproof, such as polyester fiber, nylon, etc., so when we wearing waterproof clothing encounters water in water, we encounter water in the water in water.You will see that water penetrates into the clothing, just like the clothing of ordinary fabrics, but the inner layer of the clothing is dry and does not exudes in. This is the waterproof film in the middle of the composite fabric played a role.

As for, do you use the waterproof membrane technology clothes?100%To achieve waterproof effect, this may not be.Because the complete waterproofness of the clothes is also related to the plastic pressing strip and zipper's waterproofing at the joint seam.The waterproof and waterproof waterproof of the fabric refers to the functionality of the fabric itself.100%waterproof.

So it's not a special case, or in particular, don't really take the waterproof function as a raincoat.~~quack~~

The difference between waterproof fabric and waterproof fabric

In the early days of the development of waterproof fabrics, the adhesive film type fabrics with the most market share are mostly adoptedPTFE (PTFEPolytefluoroethyleneCureThe film of the class, this type of film is a microre film, and the waterproof performance is represented by the water pressure value they can bear, not100%waterproof.In comparison, another film that has been adopted by more and more brands in recent years-Potless hydrophilic membrane has not only reached non -perforated itself100%waterproof makes the waterproof performance more reliable. Some porous hydrophilic membranes are also optimistic about by more people in the industry because of their environmental protection and harmless characteristics to the human body. This material does not contain no containmentPTFEingredients can directly contact the Skin, and it can be recycledpetPlastic pupa is re -looped.I will teach you the difference between waterproof fabrics and waterproof fabrics.

Generally, these fabric vendors with thin film technology do not sell thin film to clothing brands. They compound the film and other material fabrics by paste the process to form composite fabrics.These fabrics used to compose with film are not waterproof, such as polyester fiber, nylon, etc., so when we encounter waterproof weather wearing waterproof clothing, we will see that the water penetrates into the clothing, just like the clothing of ordinary fabrics, just like the clothing of ordinary fabrics., But the inner layer of the clothing is dry, and there is no water exudation. This is the waterproof film in the middle of the composite fabric plays a role.

If water is scattered into small water beads and slipped off, it is usually because the fabric used is treated with water -proof waterproof treatment. The waterproof treatment is actually a special layer of treatment covered on the surface of the fabric. It is usually added when the finished product is set.DWR, So as to obtain durable water splashing performance.useDWRThe purpose of the coating is that when the water is dripping to the surface of the clothing, it can form small water droplets or slide directly from the surface of the clothing to prevent the fabric from absorbing the water. At the same time, it also makes it easier to remove the oil and pollution attached to the surface of the clothing.Most waterproof clothing uses thisDWRwaterproof treatment, and adoptedDWRThe advantage of the treatment is that the surface layer of the clothing can not absorb water, thereby ensuring that the waterproof fabric can achieve good breathability, so that the human body has a very good dressing feeling.

In short, waterproof fabrics can basically reach100%waterproof, but in order to obtain a more comfortable dressing experience, these waterproof fabrics have a good breathable effect.DWRWaterproofing is also necessary.In addition, the waterproof performance of clothing bar, zipper and other clothing accessories used in the seams of clothing is also very related, because the waterproof and waterproof waterproof of the fabric are functionality of the fabric itself.The gap in the zipper cannot be achieved if it is not treated by the clothing100%waterproof.