How to maintain raincoat

1. Platform raind coat

If your raincoat is a tape raincoat, after use, you should immediately put the clothes used in a cool and ventilated place and dry the raincoat.If you have dirty things on your raincoat, you can put your raincoat on a flat table, and use a soft brush to dip some water to gently brush to wash off the dirty things, remember to remember the raincoat of the tapeCan't be rubbed by hand, let alone expose it to the sun, or put it on the fire to burn, and use those more alkaline soaps to clean it. The purpose of this is to avoid aging raincoat aging.Or get crispy.

The tape raincoat cannot be placed with oil, and it should be stacked when it is stored. It should not be placed on the raincoat.Fold, or cracks.In the box of plastic cloth raincoat, some camphor pills should be placed in order to avoid the stickiness of the raincoat.

2. Rain -proof cloth raincoat

If your raincoat is a raincoat raincoat, when the raincoat is wet by the rain, you cannot use your hands or hats to play the rain on the raincoat, because it may damage the waterproof performance of the fiber in the raincoat.

Rain -proof cloth raincoat is not suitable for often washing.If it is often washed, it is likely to reduce the waterproof performance of Raincoats.If you think your raincoat is too dirty, you can gently rub the raincoat with some clear water, then dry the washed raincoat, and then hang it with drying.Just hot.If you are going to put away the raincoat, then you have to let the clothes be completely dry before folding it. This is to prevent the chemical reactions in the raincoat in the raincoat due to humidity, so that the raincoat will mold.

3. Plastic film raincoat

If your raincoat is a plastic film raincoat, when the raincoat is wet by the rain, you should immediately wipe the water on the raincoat with a dry cloth, or take the raincoat into a cool and dry place to dry it.

The plastic film raincoat cannot be exposed to the sun, nor can it be grilled on the fire.If your raincoat is wrinkled, you cannot use the iron to scal the iron. You can soak the raincoat in the warm water of 70 or 80 degrees for a minute, then take it out, put it on a flat table, use yourOpen the raincoat flat in your hand, do not die to pull the raincoat, so as not to deform the raincoat. If the plastic raincoat is used for a long time, it is easy to remove or ruptured.You can choose to repair yourself.

The repair method is to put a small piece of film in the place where the raincoat is torn, and then put another glass paper on the film.Then use an electric iron to hot quickly so that the film can stick to the torn mouth to complete the purpose of repair.When repairing Raincoats, be sure to remember: the raincoat cannot be sewed with a needle line.Otherwise, it is likely to make more problems with Raincoats.

Rainwear maintenance and maintenance skills

1. Rubber raincoat storage method

When collecting rubber Raincoats, the newspaper can be lined in the sandwich or sprinkled with a layer of tweezers.

2. Rubber raincoat odor removal method

When the rubber raincoat has a odor, hydroxygen can be mixed into the water and soaked in the raincoat. After drying, the odor will disappear.

3. Plastic raincoat adhesion method

The plastic raincoat is broken. You can first align the cracks, spread a piece of glass paper on it, and press the heating iron rod to press it a few times. Do not press the time each time it is too long, so that the glass paper will not be scalded.Stick up.Breaking the hole, you can cut the same plastic cloth into a slightly larger block or round block, cover it on the hole, and then cover the glass paper to heat the adhesion in the same way.

4. Plastic raincoat wrinkle removal method

Light wrinkles appear on the raincoat, which can be hung on the hanger to let it naturally recover.If the wrinkles are tight, you can soak the raincoat in a hot water of about 70 C for 2 minutes. After taking it out, put it on the tablet and flatten it, and then dry the water.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

one,Electric car canopy product materials

1. Use high -tech composite materials (FRP) to production and production.

2. Use imported stainless steel pipes to production.

3. Use PC endurance board to produce panels and side panels.

4. Use a special electric wiper to automatically scrape the rain.

2. Introduction to electric cars rain canopy materials

1. The characteristics of FRP: light quality, high strength, anti -corrosion, insulation.Its intensity is several times that of ordinary plastic boards,The intensity is greater than steel and aluminum.FRP board has the characteristics of high temperature resistance, aging resistance, friction resistance.

2. Features of stainless steel: good ductility, corrosion resistance, good thermal resistance, high clean and smoothness.Because it is not necessarySurface treatment, so it is simple and simple, and the welding performance is good.

3. Features of PC endurance board: good light transmission, difficulty, weather resistance, temperature resistance, good processing, light weight.

Third, the electric car raindrops are good or the raincoat is good

1. Convenience

First of all, in terms of convenience, the convenience of the puff may be higher. After all, it is sufficient to install it directly. You dont need to wear it frequently like a raincoat.There is no problem of folding and cleaning after arriving at home. Although because of the larger rhizon, it will affect the convenience of some electric vehicles on parking, but it is relatively high.Come to block the sun.

2. Show rain

From the perspective of rain -covering, the two should be similar. Although the area of the rain shed looks large, the actual rain covering effect is not so ideal. When the car is stopped, the car will still be wet by the rain and not wet.There is less, and it is easy to let rainfish in during the driving process, especially under the influence of some winds in winter, the angle of rainwater falling will not be straight up and down.It will also appear on the raincoat. Basically, the rain that can be covered by the canopy can be covered. Rainwear is generally no problem, and the rainfall of the raincoat is not too good!

3. security

As for safety, it is definitely a lot better. At present, many cities are already forced to remove the rails, because the safety of the canopy is not enough.After installing the rain shed, the resistance of the electric vehicle is obviously much larger than the non -installed. This will not only cause a greater burden on the battery of the electric vehicle, but also affect its flexibility in the operation and other operations. In addition,, in addition,, in addition,The canopy also significantly increases the height and width of the electric vehicle, which will affect the pedestrian on the roadside to a certain extent, and increase the chance of the pedestrian of electric vehicles.If you stop on the side of the road, it is easy to be blown down by the wind. If the pedestrian does not pay attention, it will be easily crushed by the car, and the raincoat will not have these concerns at all.

Overall, although the rhizon is more convenient than a raincoat, considering it from safety, Xiaobian suggested that everyone is better to choose Raincoats when choosing electric vehicles.Wear some, and you ca nt put the rain directly in the car, but it is really much better in safety. It is obviously not worth it!

What Raincoats do motorcycle Cavaliers choose?

1. The model determines the type of raincoat

First of all, your own model, this is a big prerequisite.

Cross -bicycles and beam cars (less used in this model):The lower body (position below the thigh) is basically wet when it rains, and the shoes are basically humid.The editor suggested that the user group uses a split raincoat. After all, the split raincoat can surround the whole person to the maximum and it will not affect the control. It can also use integrated Raincoats and a pair of long waterproof cover.

Pedal model:The raincoat can be described as a natural versatile partner. After all, its design shape has a certain protection of the lower body. Unlike the legs of cycling and beam cars during cycling, the legs are almost exposed.The narrow and wide figure on the top of it, it is not easy to be blown by the wind after putting on the raincoat, so it is recommended to wear a simpler integrated raincoat.

2. What kind of fabric material and coating raincoat

It depends on the user's own choice. At present, the material of the raincoat is roughly divided into three categories. The materials are different and the price is different.Consumers can buy according to the actual situation:

Material with polyvinyl chloride (PVC): The jelly semi -transparent plastic raincoat often seen outside. This raincoat is low in price, but it is easy to damage.

Poly -polyester -wire spinning or distributed material: Another layer of PVC waterproof layer is applied in the inside of the cloth.

Material with waterproof and humidity cloth: Apply a layer of waterproof and humid coatings in the inner side of the fabric, such as Raincoats commonly used by police and climbers. Its waterproof and humid layer has 1 billion micropores per Square Square.Gas molecules are passed, but large water molecules cannot be passed. Therefore, the waterproof and breathable effect can be achieved. The disadvantage of waterproof and humidity is that the price is more expensive.

3. Look at the size

Most of the raincoat packaging will have a comparison table that chooses the raincoat size by height, but because the Raincoats manufactured by the raincoat manufacturers on the market are different in size, it is not recommended to buy different brands directly to buy different brands.The raincoat is prone to errors.

4, try on

It is best to try it on Raincoats, but usually the Raincoats in the mall cannot be tried. It is recommended that people who wear M numbers of clothes to buy Relcoat L. In this way, it will be better. Even if you wear more clothes in winter, you can use it.

Where to put a motorcycle raincoat

1. Can be placed in a box at the tail of the motorcycle or in the storage box under the cushion.

2. If there is no tail box, you can be tied to the tail of the motorcycle.But avoid being taken away ~

3. You can put it at home and look at the weather forecast before going out. If it rains, bring Raincoats or choose other transportation methods.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

[Source of raincoat] The historical raincoat of raincoat is due to a "mistake" of workers

The raincoat on rainy days, plus its strong wrapping silhouette, plays an important role in shaping the character image. Remember to have a Chekhov's "People Put in the Set" in High school. The character is lonely. Burchov, who is timid and fearful, is "abiding by the law", is that it always takes umbrellas, raings, and Raincoats in the sunny day. Essence

Although the raincoat made of rubber is not permeable, it is hard and crispy. It is neither beautiful nor comfortable to wear on the body. British metallurgist Parker decided to improve this kind of clothes. Use carbonide to do solvents, dissolve rubber, make waterproofing technology, and apply for patent rights, and sell it to a person named Charles, and the raincoat starts to produce a lot.

After entering the 20th century, with the emergence of plastic and various waterproof fabrics, the style and color of Raincoats are becoming more and more fashionable. It has no longer simply used as a functional jacket and has become a fashion item.

[Reflective raincoat] What coating is good for reflective Raincoats?Why can reflective raincoat prevent rain and reflect

Reflective raincoat, as the name suggests, is a rainproof clothing that combines rainproof and reflective protection.So how can it be achieved by rain and reflective function?

First of all, from the fabric, the fabrics for raincoat include high dense fabrics and coating fabrics.High density cloth is usually woven from the thin chemical fiber yarn. The density is very high. In addition, the non -water absorption of the chemical fiber yarn itself has led to high -density.

The umbrellas we often use and some basic Raincoats are highly dense fabrics.Of course, this kind of non -water properties are limited to small and medium rainstorms for a period of time. For example, if it is a long rainy environment, umbrellas will still leak rain.

At this point, we need to use another fabric: coating fabric.

To be precise, coating fabrics are a kind of fabric for special process processing, with two layers or even more layers.It is to use solvents or water to put the need for coating gel grains (yesPUglue,A/Cglue,PVC, PEGlossom) Solubinates into drooling, and then in a certain way((Round net, scraper or roller) evenly applied to the fabric (with cotton, polyester, nylon and other substrates), and then fixed through the temperature in the oven to form a layer of uniformly covered with rubber on the surface of the fabric to achieve waterproof waterproof waterproof, Windproof, breathable and other functions.

This is actually simple, but operation is the key!That is, the use of solvents (current fabric fabrics generally use toluene or butanol) to use the coating gel grain (there isPUglue, A/Cglue, PVC, PEPlatform) and other dissolving into drooling (the ratio of the gelatin and the solution, viscosity, etc.) is evenly applied to the fabric (with cotton, polyester, nylon and other substrates) in a scraper, and then passed through the oven passed the ovenThe inner temperature is fixed, so that a layer of uniformly covered with glue on the surface of the fabric is to achieve waterproof, windproof, and vaporic functions!

The coating fabrics or fabrics are generally improved in terms of cracks. These coating fabrics are used in down jacket fabrics, skiing fabrics, work protection clothes fabrics, Outdoor sportswear fabrics, etc.

And if you want Raincoats to have rainproof and protection at the same time on rainy days, we need to add another thing on the basis of the original raincoat: reflective material, usually reflective bands and lattice bands, or reflector coatings.