1. What is the effect of Solar warning Lights

Solar warning Lights are a traffic signal lamp with solar energy as energy. This Outdoor lamp does not require external power supply, no wiring, simple and convenient installation, Solar power supply, widely used in road administration, fire protection, transportation and other fields.The role of Solar warning Lights is mainly:

1. When the road maintenance operation, place it in a suitable position to remind drivers to drive with caution.

2. installation of dangerous areas of traffic safety hazards on the highway, remind drivers and past pedestrians to pay attention to safety and avoid traffic accidents.

3. In some dangerous sections, such as highway intersection, curve, bridge, roadside village intersection, school entrance, school gate, residential area, factory area, etc., can play a warning role.

4. At night, the Solar warning light is adsorbed on the building. Open the switch to use the energy Lights stored during the day to play a role in building alarm.

5. A warning light can also be placed at the rear or rear window of the car. Avoid rear -end when the car fails.

The main role of Solar warning Lights is to install various needs to be alert to remind others through the flashing source of the lamp.

2. How to install Solar warning Lights

Solar warning Lights are mainly installed in various public places that need to be warned, and the installation is very convenient.The installation method of Solar warning Lights is as follows:

1. Take out the Solar panel and fix the fixed bracket with the Solar panel with a rivet.

2. Use a screw to fix the Solar panel bracket with the Solar plate base.

3. Connect the connection line under the warning light with the wiring box of the Solar panel.

4. Fix the Solar panel with the bracket on the screws on the slow flashing light to open the warning flashing frame and insert the power plug.

5. Fix the hug on the column.

6. Adjust the orientation of the Solar panel, and then fix the screws.

3. What should I pay attention to when installing Solar warning Lights

precautions for the installation of Solar warning Lights are:

1. Pay attention when installing in the building to avoid being installed in a dark and humid place, and place it in a place with sufficient sunlight to avoid unable to collect solar energy normally.

2. The Solar warning lamp is an Outdoor lamp. It should be a solid, durable, waterproof, dustproof shell, and related internal circuit protection design.

3. When not in use, it should be charged once every 3 months. The switch should be turned off when charging.

1. How long is the Solar lighting lamp charging?

1. Charging Sunshine for 6-8 hours on sunny days, and the lighting light at night is 8-10 hours.

The sun is 6-8 hours with a cloudy day, and the Lights are turned on at night for 4-6 hours.

2. The benefit of charging Solar lighting is: energy saving and environmental protection, no need to be equipped, installed everywhere, absolutely safe.Automatically turn off the Lights and charge during the day, and automatically turn on the light.When people are approaching, they provide highlights, and people turn colorful and low when they leave, taking into account the needs of lighting and decoration.This product has a variety of working modes to set, and the two function keys are different from the induction and long bright functions, which are simple and clear.

2. Can the Solar lights be charged if there is light?

Sun panels are a device that responds to light and can convert light into electricity.The theoretical light of the Solar panel can be charged in theory, but the effect of too weak light, or the light light effect of light light will be worse, and it can't even detect it.

Solar panels: Solar panels are the core part of the Solar power generation system, and it is also the highest value part of the Solar power generation system.Its role is to convert the radiation capacity of the sun into electrical energy, or send it to the battery to store it, or push the load work.The quality and cost of Solar panels will directly determine the quality and cost of the entire system.

battery: Generally, it is a lead -acid battery. In small and micro systems, nickel -metalized batteries, nickel -cadmium batteries or lithium batteries can also be used.Its role is to store the electric energy emitted by the Solar panel when there is light, and then release it when it is needed.

3. Is Solar lamps that require direct Solar to charge before charging

Solar street lights must not have Solar irradiation to emit light.Principles of the work principle of Solar street lights: Under the control of intelligent controllers during the day of the day, Solar panels are exposed to Solar light to absorb Solar light and convert into electric energy.lighting source power supply to achieve lighting function.The DC controller can ensure that the battery pack is not damaged due to over -charging or excessive release. At the same time, it has functions such as light control, time control, temperature compensation and lightning protection, and anti -polar protection.The Solar street lighting system can ensure the normal work of more than 15 days.

1. What is the principle of Solar insecticidal Lights?

Solar insecticidal Lights are a Solar Lamp with insecticide function. It is composed of Solar cell boards, controllers, battery packs, black light lamps shells and light rods.

1. System work principle

Under the control of the controller, the Solar cell board is charged to the battery pack during the day, and the battery pack provides electricity to the light to kill the light; Solar cell boards are used as a source of electricity, and the electricity sent by solar energy during the day will be stored., For the work.

2. Principles of insecticide

Solar insecticidal Lights use the characteristics of the light, waves, color, and tendency of pests. Using frequency vibration wave technology, the wavelength range of light is broaden to 320 ~ 650nm.Radiation is excited for the light and excitement of the biochemical of the pest, and the light source of the pests is led to the light source of the pest; the specific insecticide method is divided into four types: electric shock, water kill, impact, and wind suction.

2. What is the effect of Solar insecticidal lamps?

Solar insecticidal lamp is a method of physical prevention and treatment. It is widely used in the fields of grain crop disease and insect pest control, vegetable diseases and insect pest control, economic crop disease and disease prevention and treatment, and the prevention and treatment of fruit trees and pests.What is the effect of insecticidal killing?

Solar insecticidal Lights are physical insecticidal equipment that uses four ways to seduce insects in light, waves, color, and taste.It can lure 87 families of 1,287 kinds of agricultural and forestry pests, and the control area of each Solar pesticide light can cover 30 to 60 acres of farmland. It can be used in various types of farmland. While alleviating the lack of energy and protecting the environment, there is also a lure insect.The advantages of large body capacity, saving labor time, and reducing pesticide use.

After many years of field experiments, the Solar pesticides have been recognized by the majority of agricultural workers and are considered a high -quality disease and insect prevention Tool.

1. What is Solar Camping lamp

Solar Camping lights, as the name suggests, are a Solar power supply system, which can use Solar charging Camping lights. Many Camping time now is long. Ordinary Camping lights cannot provide too long battery life.Camping lights can be charged with solar energy, which is very convenient. Not only can it be camped, but this Outdoor light can also be used at night fishing, car maintenance, garage, etc.

Second, the structural principle of Solar Camping lights

1. The structure of Solar Camping lights

Solar Camping lights are composed of Solar battery components, LED lamp sources, Solar controllers, batteries and other parts. The battery components are generally used for polysilicon; LED lamp heads are generally used in ultra -high bright LED light beads;It has light control anti -anti -connection protection; batteries are generally environmentally friendly to maintain lead -acid batteries.Camping lamp shell materials generally use environmentally friendly ABS plastic and PC plastic transparent cover.

2. The principle of Solar Camping lights

When the Solar Camping light system is simple, when the Solar panel is induced to the sun during the day, the light is automatically turned off to enter the charging state. When the night comes, the Solar panel sensor does not reach the sun, and the battery discharge state is automatically entered and the light is turned on.

3. Is Solar Camping light easy to use?

Solar Camping lights are an Outdoor lamp, which are mainly used during Camping. This is a very useful Camping light.

Compared with ordinary Camping lights, Solar Camping lights can be charged using solar energy. The natural light sources of nature are used to reduce the consumption of electricity, energy saving and environmental protection, and can provide longer battery life; many Solar camps also have intelligent control.The brightness of the Camping light can be adjusted automatically according to the natural brightness, which can be said to be very useful.

Of course, Solar Camping lights also have a disadvantage, that is, its price will be higher than ordinary Camping lights.

Specification of Solar Lamp installation

Foundation

Determine the position of the light;1 rice 2 They are all soft soil, so the depth of excavation should be deepened; at the same time, there must be no other facilities (such as cables, pipelines, etc.) below the excavation location, and there are no long -term covers on the top of the street light, otherwise the position should be replaced appropriately.Reserved (excavation) at the location of the lamps meet the standard 1 rice 3 Pit;The embedded parts are placed in the middle of Fangkeng, PVC One end of the thread Tube is placed in the middle of the embedded parts and the other is at the battery storage office (as shown in the figure above).Pay attention to keeping the embedded parts, the foundation, and the inner ground on the same level (or the top of the screw and the inner ground on the same level, depend on the needs of the venue), one side is parallel to the road; so as to ensure that the lamp rod is erected upright and the back end is correct and the back end is correct and the back end is correct and the back end is correct and the back end is correct and the back end is correct.Not biased.Then C20 The concrete is fixed. During the pouring process, the vibration stick shakes continuously to ensure the overall density and firmness.After the construction is completed, the mud residue is left on the positioning board in time, and impurities on the bolts on the bolt are cleaned by waste oil.During the soil solidification process, watering and maintenance should be regularly; wait for the concrete to completely solidify (generally 72 Only more than hours) can be installed in the chandeliers.

installation of Solar battery components

The output of the Solar panels must take measures to avoid short connections before connecting to the controller; the Solar cell component must be firm and reliable when connecting with the bracket; the output line of the component should be avoidedTo facing the south, the guidelines are pointed at the direction of the guideline.

battery installation

When the battery is placed in the control box, it must be put lightly to prevent the control box from being smashed; the connection line between the battery must be pressed on the wiring column of the battery and uses copper pad to enhance the conductivity;After any circumstances, short connection is prohibited to avoid damaging the battery; the output line of the battery must passPVC After the threading Tube; after the above is completed, check the wiring of the controller side to prevent short circuit.Close the door of the control box after normal.

Lamp installation

The components of each part are fixed: the Solar board is fixed on the Solar bracket, the light head is fixed to the pick -up arm, and the bracket and the arm picking the arm are fixed to the main pole, and the connection line is led to the control box (battery box).Before the light rod is lifted, check whether the fasteners of each part are firm, whether the light head is installed correct, and whether the light source work is normal.Then work normally on the simple debugging system; loosen the Solar board connection cable on the controller, and the light source work; connect to the Solar board connection line and the Lights are off; at the same time, carefully observe the changes in each indicator light on the controller;Start up installation.When the main lamp rod is lifted, pay attention to safety prevention; the screw is absolutely tight. If the component is deviated, it is necessary to adjust the direction of the rising sun to the south.Put the battery into the battery box and connect the connection to the controller according to technical requirements; first connect to the battery, then connect the load, and then connect to the Solar board; when the wiring operation, you must pay attention toWrong, positive and negative polarity cannot collide and cannot be opposed; otherwise the controller will be damaged.Whether the debugging system work is normal; loosen the Solar board connection on the controller, and the Lights are on; at the same time, connect to the Solar board connection cable, and the Lights are off; then carefully observe the changes in each indicator on the controller;box.

Which Solar lamps are good?

1. First of all, consider the life of the whole light, there are several main factors:

1 As well as led The life of the Hengliu driver device

Solar street lamp manufacturers often say to the guests that I bought the best chips and the best battery, so life is the best. In fact, because the Solar street lights use DC power supply, the voltage is low and the current is large. Each component is critical.Internal resistance of a connector, the resistivity of the wire, (because becauseP Thread damage = 12R To.Of course, the main reason for the actual use has proven to affect the life of Solar street lights is to determine the life and life of the battery led Drive circuit of light source.take led For the lamp beads, led The life expectancy recognized by the lamp beads is 5 Ten thousand -10 10,000 hours, but conventional technology led There is an electronic component electronic component electronic component electronic component electronic component, the service life of the electronic component is generally 3-5 In the year, the best Japanese rubies made in electrolytic capacitors can only be used 5 The year, it was decided led Drived life, and our companys led The driver is our invention patent led Digital constant stream driving technology, it does not need electrolytic capacitors, so it is not limited by its life span. led Light beads, lamp beads led The life of the driver, the controller and the Solar panel is basically the same, and the main materials are semiconductor.

2 Another factor is the issue of battery life

Solar street lights are generally usedAGL or gel battery, conventional technology can achieve service life in 3-5 The year is already good, our technology can do it 8-10 In the year, this was because the life of the battery was mainly affected by the frequency of deep circulation and the working environment temperature. Our Solar Lamp in other ordinary solar energy led Energy saving on the street light 70-85% The patented technology greatly extends the cycle of the battery's deep cycle, thereby extending the life; in addition, the working environment temperature of the battery has a great impact on life. Our company quotes nano -technology in the battery, which can be breathable and waterproof.Below the layer, so that our battery can get the best working temperature 20-25 Celsius, and the Solar street lights of conventional technologies hang the battery on the light pole or the ground (because there is no waterproof design). It is conceivable that in the hot summer, the temperature of the battery box is so high, and the temperature rises every heavier. 10 With degrees Celsius, the battery life is reduced by half.

2. Secondly consider the brightness of the whole light

Solar street lights are not that the greater the power of the light source. Many manufacturers have falsely reported power, or buy low -luming lamp beads in order to reduce costs. In fact, the same brightness.Other companyled The light emitting efficiency of the light source is all 80-100LM/W , And high light decay, 1 The decline of the year 15%-30% , And our company led The light source selects high -quality led Chip, the low light decay structure and process of patented technology, the lighting efficiency is up to the lighting efficiency 130-140LM/W , Light failure 1 10,000 hours less than 4% After testing, the actual light failure is only 2-3% Right and right, and my company led The beads directly emit rectangular light spots, which evenly distribute all light on the road, greatly improving the efficiency and average illuminance of light source, and other companiess led The light spots emitted by the light source are round or use the lens imaging (the losses are also near 10-20% ), Causing a waste of light.

Third, then consider resisting the bright days of the long rainy days

At present, most Solar street lights can only be continuous rainy days.3-7 Heaven, and this is far from meeting the requirements of climate change from all over the world, because the number of continuous rainy days in most areas exceeds more than 3-7 Oh my god, and our Solar street lights can achieve the same configuration of conventional technology 3-5 Pack, Gundam 35 The day continues to light up.Why is this?The patented Solar street light controller invented by our company can make our company's solar energy led The street lights are energy -saving 70-85% In other words, our company's Solar street lights 1 Power consumption at night is only configured with conventional solar energy in the same configuration led Street 20% ( 1-80%= 20% ),Right now 1/5 In other words, you can do it through conventional technology 6 In the rainy weather, we can be close 30 Sky's continuous rainy days.Maybe many people ask me how I did it?The principle is as follows:

A : Solar street lights led The light source uses digital driver technology than conventional technology. 20%

Most of the light sources used in Solar street lights are usedled ,and led lighting is a need for one led Drive the horizontal flow source, the conventional constant current source needs to consume the entire lamp power 20% Bost left and right, and our company uses led Digital constant stream driving patented technology, the power of this digital constant stream source is only 0.0625 ( IC . W It can almost be ignored, so that our street lights consume power consumption. 20% Essence

B The led Driven by digital constant streaming, intermittent power supply and power saving 50%

Fans of conventional technologyled When the street lamp is working, the power bead must be continuously powered to the lamp beads, and our companys led Digital constant stream, use intermittent switch to power supply to led light source. led That is, the light diode is a semiconductor device. The characteristics of the semiconductor is the switching characteristics. It is different from ordinary light sources. The number of switches is too large, which is easy to burn and damage.Switch frequency 10K-100KHz With half of the time in the unit time, use half of the electricity without electricity, so that the Solar street lights of our company will save energy and energy saving energy. 50% After testing, actual energy saving 47.3% above.And the lamps are lower than the conventional constant current technology 30-40% EssenceAt a very short switching time, the human eye and analog illumination meter are inductive.

C The led Energy -saving mode of gradient energy saving mode in the middle of the night of light source 15% above

In the middle of the night, the pedestrian vehicles on the road will be greatly reduced, so a energy -saving mode can be set up in the middle of the night.led The power of the light source slowly reduces the power you want, and then maintains it to dawn, and other companies suddenly drop to a target value, which is not good for pedestrian vehicles. Generally, our design is the energy saving in the middle of the night. 15% There are enough brightness.