1. What is the principle of induced street lights

The induction street lights can be induced by the use of infrared induction modules and PMW control to detect the thermal radiation of the human body, so that when someone is close to the highlights of the high light, the brightness of the light to weaken the light after leaving, and achieve the effect of saving energy. It is an intelligence. It is an intelligence.street lights.

There is a single -piece control in the induction street light. By adjusting the duty cycle to control the brightness, the lamp beads use environmentally friendly LED lamp beads.The induction distance of the inductive street lights can be selected according to the installation interval of Solar street lights. Even if the distance is far away, the induction is sensitive and the humanization requirements can be met.

2. Introduction to the work process of Solar sensing street lights

1. During the day, there is sunlight to charging. The ideal state is 8-10 hours of charging.

2. At night, the lamps are automatically launched to light up. When someone is passing by, the infrared induction device is triggered, and the light is automatically turned on. The strong light generally lasts 30 seconds.Bright mode.

3. When the person leaves the induction range, the light is automatically turned into a slightly bright mode, and the next time someone approaches the strong bright mode.

3. What are the advantages of induction street lights

1. Energy saving and environmental protection:The advantages of induction street lights are mainly energy saving and environmental protection. Because it is a automatic control product made from infrared technology. When the human body enters the inductive area, the switch will automatically connect the load.After leaving, the delay design will automatically turn off the load after leaving, and it is very good to "people go to the Lights, people leave the Lights", avoiding the waste of energy.

2. Automatic light metering:The switch of induction street lights has an automatic light metering design. When the light is strong during the day, the induction work will be disconnected; and the induction street light has no contact electronic switch, which extends the load life.

3, reliable induction:The use of thyristor lines, high safety, wide induction range, and sensitive induction performance.

4. High cost performance:The induction street lights use full -plastic lamps, which is not easy to deform, discolored, damaged, and has a long service life; and the price of induced street lights is not expensive. Because solar energy is used as a source of electrical energy, the cost of use is not too high.

1. Common faults and maintenance of Solar street lights

With the gradual adjustment of my country's energy structure, Solar resources are widely used. Solar street lights are street lights using Solar lighting. During use, there may be some faults. The following is a common failure and maintenance method for Solar street lights:

1. The whole light is not bright

Solar street lights are Outdoor lighting. They often encounter high temperature or rainy conditions, low temperature or rainy weather, etc. The controller of Solar street lights is usually insidePhenomenon.First check whether the wiring site of the controller has water traces or rust. If so, it is likely that the controller has been damaged. If there is no battery voltage measurement, such as 12V Solar street light power supply system, the battery voltage is lower than 10.8V, the battery has been storage.No electricity, you need to replace it.Check if there is voltage and current output under normal working conditions.If there is no, the batteries are damaged and replace the batteries.There is no problem in the above, you should check the light source. Only the light source is connected to the power supply. See if it Lights up, the light source is replaced without light.

2. The lamp head flickered

The cause of this failure is poor, the battery is lost in power, the battery is lost, and the amount of power storage has been severely reduced. If the line is fine, the battery is replaced.

3. Short lighting time

Generally, it is caused by rainy days without the sun. If the rainy day durates short, it is usually caused by the decline in battery storage power and insufficient power storage capacity.

4. The source of Solar street lights is not bright

Many Solar street lights use dot matrix LED light sources. Except for the quality problem of LED light sources, some lamp beads will cause this situation.The solution is to replace the corresponding lamp beads, welded firmly or replaced the entire street lamp head.

Second, the Solar street light is broken

Solar street lights are working outdoors. Even if the quality is good, it will inevitably fail. So who should I find if it is found that the Solar street light is broken?

Generally speaking, the Solar street lights are broken, depending on where the Solar street lights are installed:

1. If the Solar street lights on the municipal road are broken, you can contact the local municipal street light management department to let the street light management department go to repair.Essence

2. If the Solar street lights in the community are broken, you can contact the property department to let the property be repaired.

3. If the Solar street lights of the scenic area or Park are broken, they can generally report to the staff center or Park management office to report to the staff, and they will send people to repair it.

4. If the Solar street lights in rural areas are broken, as long as you buy Solar street lights produced by regular manufacturers, contact the manufacturer. The manufacturer will send professionals to contact the person in charge of the village.If the user cannot solve it, they will send professional and technical personnel to help solve the situation where the street lights are not turned on.

1. What street lights are Solar street lights

Solar street lights use crystal silicon Solar batteries to power. The maintenance valve controlled sealing battery (collagen battery) storage electricity is stored. The ultra -high -bright LED lamps are used as a light source and controlled by intelligent filling controller. It is used to replace traditional public power lightingStreet Lights.Solar street lights are composed of several parts such as LED light sources, Solar cell panels, batteries, battery insulation boxes, Solar street light controllers, street lights, and auxiliary materials wires.

The working principle of Solar street lights is: Under the control of intelligent controllers, Solar cell panels absorb Solar light during the day and convert into electric energy, charge the battery pack, and provide electricity to the LED light source to power the LED light source at night.Electricity can be stored to ensure the normal work of rainy weather.

2. How much is a set of rods in Solar street lights?

The price of Solar street lights is affected by factors such as the height of the light pole, the light of the light head, the power of the power, the length of the lighting time., Lantern flange sleeves, basic embedded parts and built-in wires, ranging from about 2500-1000 yuan according to the configuration.For example, a 6 -meter -high, 30 watts of Lights, and 6 hours of light per day. The price of such Solar street lights is about 2400 yuan.(The above price source network is for reference only)

3. How to choose a more cost -effective Solar street light

1. Look at the detailed configuration

The configuration of Solar street lights with relatively high cost is relatively reasonable. Solar street lights look at the basic configuration mainly depends on the power of the lamp, the capacity of the battery, the size of the battery plate, the material of the light rod, etc.Buy products with virtual capacity.

2. Look at the needs of the road

Solar street lights need to determine the height and distance according to road needs. First of all, you need to know the width of the road used in Solar street lights, so as to choose a single arm or Solar street light; secondly to see the interval between Solar street lights, the power of the choice of lamps needs to be reached.What brightness is; in the end, it depends on the height of the Solar street lights to determine the size of the lamp power and brightness.

3. Look at the quality guarantee time

Under normal circumstances, the warranty time of Solar street lights is 1-3 years. The longer the warranty time, the more guaranteed the quality of the street lights, but the price will be relatively high.

4. Look at the brand

To buy Solar street lights, you should pay attention to the strength and reputation of brand manufacturers. This can be understood by online query methods. You can go to each brand to consult to understand the specific strength of the manufacturer.

1. The advantages and disadvantages of Solar street lights

Solar street lights are used to power the light energy through the Solar circuit board to power the lamp. This kind of energy -saving and environmentally friendly street lights are used more and more. Is Solar street lights easy to use?

1. The advantages of Solar street lights

(1) The installation is easier: The initial laying cable of the conventional street lighting project is a very difficult basic project. First, the excavation of the wire ditch, the launch of the wire Tube, the internal pipeline, the earthwork backfill, and the vegetation recovery.Then carry out long -term installation and debugging. If there is any problem with any line, the inspection work is more complicated, and a large area of rework may be required.Strict requirements for terrain and lines, high auxiliary materials and labor costs.The installation of Solar street lights is relatively simple and cheap: When installing solar energy, you don't need to lay complex lines. You only need to make a cement base, and then install the light rod.

(2) Low use cost: The daily use of conventional street lights requires high electricity costs. It is necessary to maintain or replace the lines and other configurations for a long time, and the maintenance cost increases year by year.Solar street lights do not require electricity bills, only one investment is required, and there is basically no maintenance cost in the later period, which has benefited for a long time.

(3) Safety: Conventional street lights have hidden dangers in terms of construction quality, aging materials, abnormal power supply, and conflict of water and electric pipelines: Solar street lights use 12V low -voltage power supply, operate safe and reliable, safe and reliable, no energy saving, no consumption, green, green, green, green, greenEnvironmental protection, easy installation, and automatic control of maintenance exemption.

(4) Energy -saving and environmental protection: Solar street lights use Solar light as the source of energy, without consuming conventional electrical energy, solar energy is inexhaustible clean energy, which is in line with the state's national policy that advocates green, energy saving and environmental protection.

2. The disadvantage of Solar street lights

(1) High cost: The initial investment in Solar street lights is large, and the total cost of a Solar street light is 3 or 4 times that of the same power conventional street lights.

(2) Low energy conversion efficiency: The conversion efficiency of Solar photovoltaic batteries is about 15%to 19%. In theory, the conversion efficiency of silicon Solar cells can reach 25%, but after actual installation, the efficiency may be reduced due to the blocking of the surrounding buildings.Essence

(3) Affected by geographical climatic conditions: Due to relying on the sun to obtain energy, the local geographical climate and weather conditions directly affect the use of street lighting.The rainy days will affect the lighting Lights, causing the illuminance or brightness to meet the requirements of the national standard, and even the Lights appear. Because the light is insufficient during the day, the light time at night is too short.

(4) Low life and cost -effectiveness of components: The price of batteries and controllers is high, and the battery is not durable enough. It must be replaced regularly.

(5) The brightness is relatively low: Compared with the city circuit light, Solar street lights are usually half -power or lower power, low brightness, and the general illumination range is 6-7m.The need for roads and main roads.

2. What road is suitable for Solar street lights

The advantages and disadvantages of Solar street lights are obvious. When used, it can avoid strengths and avoid weaknesses, so that Solar street lights can better play.Generally suitable for installing Solar street lights:

1. Highway street lighting in rural areas, towns and villages

Solar street lights use LED street lights. The advantages of environmental protection and energy saving, low maintenance costs, and non -municipal film interruptions have made rural Solar street lights a landscape of new rural areas.

2. Urban squares, parking lots, school playgrounds, workers' green space, Park lighting

Large -scale urban street lanterns need long -term lighting to consume a large amount of city electricity.Solar street lights use LED street lamp heads, such as energy saving and power saving.Therefore, replacing the city circuit Lights of these places with Solar street lights is a very effective way of energy saving.

3. lighting of golf stadium, seaside bath, high -end villa area and other lighting

The lighting of golf courses, seaside baths, and high -end villa areas often requires Landscape light decoration. Now the Landscape lights can also be powered by Solar panels. The Solar landscape street lights produced are perfectly combined with technology and art, highlighting the beauty of the times.

4. Highway warning signs, bridge street light power replacement

Highway warning signs and bridge street lights replace them into Solar street light products, which can continue to effectively supply power on highway warning signs and bridge street lights, and do not need to maintain it frequently, saving a lot of maintenance costs.

1. What is the Solar landscape lamp

Solar Landscape lights use Solar power generation as electrical energy supply, providing night road lighting, high -light lighting light source design, light control over time control, with high brightness, easy installation, stable work, no cables, no conventional energy, life spanThe advantages such as longness belong to the green energy products that are strongly advocated in today's society.It is mainly used in urban roads, community roads, industrial parks, parks, roofs, night scene lighting and landscape lighting in places such as green belts, squares, pedestrian streets, fitness and leisure squares.

Second, Solar Landscape light work principle

The Solar Landscape light is to convert solar energy into electrical energy to achieve lighting. The top part of the landscape lamp is a Solar panel, which is also known as photovoltaic components.Convert solar energy into electrical energy in the battery,At night, the battery pack provides electricity to power the LED light source to achieve the lighting function.becauseSolar Landscape lightPower generation through solar energy, so there is no cable, no leakage and other accidents occur.The DC controller can ensure that the battery pack is not damaged due to over -charging or excessive release. At the same time, it has functions such as light control, time control, temperature compensation and lightning protection, and anti -polar protection.