1. What is the principle of color change Cycling glasses

Trimous glasses can change the color of the lens according to the strength of the external light, thereby protecting the eyes from strong light stimulation. Therefore, many friends choose to wear colorful glasses when riding, but many friends do not know the principle of color change Cycling glasses.The working principle is simple:

1. When making color -changing Cycling glasses, the light color material is added to the glass raw material. The lens contains silver (silver chloride, silver bromide) microcrystalline.Electronics, the electrons are captured by silver ions and reacts: colorless silver is decomposed into opaque silver atoms and transparent halogen atoms. The silver atom absorb light to reduce the light transmission rate of the lens, so the color of the glasses changes.

2. Because the halogen in the color changing lens is not lost, the reversible reaction can occur. After the activation of the light disappears, the silver and the halogen are reused to restore the lens to the original transparent colorless or light -colored state.

riding is often outdoors and needs to be stimulated by the sun. Therefore, it is better to wear a pair of discolored Cycling glasses. However, some friends are worried that the color changing Cycling glasses will be harmful to the eyes.Intersection

2. Is riding colorful glasses harmful to the eyes?

The light transmission rate of color -changing Cycling glasses is relatively low. Although it can absorb most of the ultraviolet, infrared rays, and various harmful glare, due to the halogen chemical components contained in the lens, the light transmission rate of the lens is relatively poor. If it is used for a long time, it is used for a long time.It may cause visual fatigue and not suitable for long -term cycling.However, with the advancement of manufacturing technology, the discoloration rate and fading rate of color -changing lenses have greatly improved, and high -quality color -changing Cycling glasses almost have no harm.

In addition, it should be noted that there are some inferior color -changing Cycling glasses unevenly discolored, either slow color change, fast fading, or fast discoloration and slow fading, and some even do not change color at all. This Riding glasses can not be worn for a long time.For effective eye protection, you should pay attention to buying two lenses when you buy.

How to match myopia Sunglasses

Persons with myopia need to consider the refractiveness of the glasses.Although it is easy to wear a layer of Sunglasses on Myopia glasses, the lens is heavier, and the double -layer lens looks cumbersome, and it is easy to shift or fall off during strenuous exercise.With a pair of Sunglasses with myopia, the advantage is relatively light, beautiful, and easy to fix.

Patients with low or moderate myopia can wear general, no refractive Sunglasses without affecting security.For patients with high myopia (higher than 600 degrees), they still need to wear refractive Sunglasses to be safe.Of course, no one can wear in inferior Sunglasses, because this Sunglasses are damaged to the eyes.

Sunglasses that are not suitable for close -up mirrors

1. Excessive circle shape affects visual effects

In order to achieve beauty, conventional Sunglasses are generally large and can cover the face in a large area.Generally, this large circle of lens is compared with the long face and long face of European and American high noses, and there are many uncoordinated features that are generally rounded with Asian faces.At the same time, the large -circle lens is relatively large, and the matching lens shape of the matched dyeing lens is corresponding and thick. Even if it is treated to a certain degree of beauty, there will be less beautiful edge thinning platforms.It is very different from consumers' initial aesthetics.

2. The best effect cannot be restored in the lens

Whether it is internationally or domestic first and second -tier brands, it can be described as good intentions in the design of the lens. The membrane layer, color matching and function are matched with the brand value, and it is mostly visually comfortable.The lens experience and good texture and good styles are favored by consumers.However, after such lenses are replaced, it is difficult to obtain lenses of the same quality and color sense, and the price of polarizing lenses today is relatively high, mostly dyeing, and the texture and performance of dyeing lenses cannot match polarizers.

3. Insufficient gravity of the circle is not enough

Pursuit of light and light has always been the design purpose of glasses.This is even more so Sunglasses, so it is fully considered "burden reduction" in each link during design, and the circle is one of the objects of the extreme chemical.As a brand of Sunglasses that has been formed, the slender circle wire design is in line with ergonomics and wearing habits.But please remember: they are tailor -made for the pair of light lenses on the frame. If they want to replace the flat lenses with a degree of lens, the original bearing grace of the original circle will be.Stretching, this is like a piece of S -size clothes. The object suddenly changed from 160 to 170. It is common for cracking and falling off.

4. The slot type and the lens cannot be perfectly stuck

The slot type of conventional Sunglasses is a U -groove, which is no problem for the flat lenses, and the stability and firmness are very good.However, when the lens is replaced with a degree, "rejection" will appear between the U groove and the lens.The cold shrinkage appeared. The original summer was just right. In autumn and winter, the lens suddenly fell off.

How to choose Sunglasses in myopia

1. About the depth of color

The filtering of Sunglasses with too light color affects vision with too much color.Many users think that tea, gray, and dark green are more moderate.Their filtering effect is better, and the scenes seen after wearing a mirror will only become darker without obvious color difference.

2. Examination of appearance

In addition to the lenses, there must be no scratches, impurities, bubbles, and stripes, women who love beauty must pay attention to whether there are UVA, UVB, and CE logos on the mirror or tag. Only these signs can play a role in anti -ultraviolet rays.

3. It is comfortable to wear

When buying Sunglasses, do not follow the trend blindly, but also choose the size, curvature, etc. according to your face shape.In addition, when trying to wear it, it depends on whether there is a sense of dizziness. The dialysis is not high. It is best to have a polarizing function.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

1. What is the difference between professional Riding glasses and Sunglasses

riding is a exercise that exercises, but when riding outdoors, there are often big sun. Many friends will choose to wear Sunglasses. But in fact, this approach is wrong.the difference:

1. Different effects

The main function of Sunglasses is Shading to prevent ultraviolet rays; and on this basis, Riding glasses also have the effect of windproof and sand prevention, which can reduce the chance of conjunctivitis.A good Riding glasses can make you feel uncomfortable when you ride.

2. Different lens

Sunglasses usually use glass or resin as lenses, and Cycling glasses cannot use glass lenses. This is mainly to prevent the glass lens from cracking to the eyes when falling.

3. Compassion differences

The ride glasses are designed to be arc that conforms to air dynamics, can fully fit the face, increase peripheral vision, and provide comprehensive protection to the eyes. Polarized Cycling glasses also have anti -fog, waterproof, anti -glare and other functions; whileThe Sunglasses themselves are not designed for ride. If the speed is accelerated during ride, the comfort will be very low.

4. color difference

The color selection of Cycling glasses is particular, different colors are suitable for different scenes, such as blue suitable for foggy or visible weather, yellow suitable for the evening; although there are many colors of Sunglasses, basically there are basically no special specialtiesPlaces and emphasis on places.

The above is the difference between Riding glasses and Sunglasses. So can ordinary Sunglasses be used as Cycling glasses?

2. Is it okay to use a Sunglasses for Riding glasses?

Can't.

Riding glasses look similar to Sunglasses, and can block ultraviolet rays, but the two cannot be mixed. Riding glasses are functional glasses. Compared with ordinary Sunglasses, the obstruction of ride glasses is better. It also has Sunglasses.It does not have the effect of windproof and sand prevention, and the protection of eye health is more in place. In addition, Riding glasses are also designed for cycling, with higher fit.Time glasses slip.In terms of safety, some Sunglasses use glass lenses. If you fall, it may hurt the human eyes.

In summary, ordinary Sunglasses are not allowed to be used as Cycling glasses. If it is a professional cycling motion, you still need to buy special ride glasses.

Mooth classification of Sunglasses lenses

1. glass lens

The glass lenses are often exposed to it. The most prominent advantage of glass lenses is that its optical properties are very stable. This is the usual advantage of glass lenses. It is the same on frame glasses.Affected by the pressure of the framework.The disadvantage of glass lenses is that it is easy to break, and it is easy to cause damage to the eyes.At present, the newly developed enhanced glass lenses are more prominent than ordinary glass lenses, and they are also considered a safe lens.

2. Polarized lens

This is a lens used on polarized Sunglasses. The polarization principle of light is used. In the future, the glare obstruction of the parties will be separated from the lens to make the sight clearer and safer when driving.In 1937, Dr. Edwinland in the United States invented this lens and was widely used in polarizing Sunglasses, and he also created his own Pokmon company.

3, color change lens

Also known as sensitive lens, due to the change of light, the color of the lens changes accordingly, so that the eyes can adapt to different environments. Under the strong light, the color of the color changing lens will deepen.EssenceThis kind of lens has been used in myopia Sunglasses. This kind of Sunglasses in the form of color -changing lenses are also considered to be the most convenient and most beautiful myopia Sunglasses, which is more popular than clamping.

4. Plastic lenses

This is the material that many Sunglasses brands like very much. Light and not fragmented are its most obvious features. The functions of non -processed plastic lenses are significantly better than glass lenses.EssenceThe disadvantage of plastic lenses is that its wear resistance is easier to scratch. When the lens is impacted, it is also easy to deform, so it should be more careful about its maintenance.

There are three main types of plastic lenses, namely resin lenses, PC lenses, and acrylic lenses.

5. Resin material Sunglasses lens

Friends who often wear glasses must have heard of resin lenses, but what are the resin lenses?Resin (CR-39) is actually a chemical substance of the phenolic structure. It is refined from the phenolic components in oil. The characteristics are light weight, high temperature resistance, strong impact resistance, and can effectively block ultraviolet rays.The great advantage of resin lenses in Sunglasses is that it is easy to color. Many fashionable Sunglasses use resin lenses to favors the characteristics of coloring.But the resin lenses are poor and impact.This type of Sunglasses have a wide range of use and strong decorative effects. It is a good choice for fashion people.

6. PC material Sunglasses lens

PC refers to polycarbonate, a type of plastic (PC). It is a polymer polymer containing carbonate groups in the molecular chain and PC material. In short, it is a Sunglasses material material.There are high -end points, PC films commonly used by professional athletes and colorless or colorless plastic sheets.It is characterized by lightness and good coloring performance. The disadvantage is that the abrasion resistance is low and the optical properties are unstable.PC -made Sunglasses are more suitable for sports people and drivers.

7. AC film (acrylic lens)

It has excellent and tough characteristics, has a high perspective rate, has good anti -mist resistance, the lowest cost, the material is crispy, the rupture may have crumbs, and the stability of optical indicators is average.

8. nylon material Sunglasses lens

nylon Sunglasses are used in sports brands Sunglasses and high -quality big -name Sunglasses. It has high elasticity and excellent optical quality, and has a strong resistance to impact.Professional protection function.However, nylon lenses have poor wear resistance and high production costs.Such Sunglasses are more suitable for people for sports or professional protective mirrors.

9. Tac material Sunglasses lens

TAC Sunglasses are relatively widely practical in China. TAC (triax cellulose, TriaceTyl Cellulose), which is complicated, is one of the high molecular materials with high penetration.TAC has the characteristics of Sunglasses, which has the characteristics of acid -resistant type, light texture, and high cost performance.However, the abrasion resistance has become a soft foot of TAC lenses, and it has its less stable optical characteristics. Although the price of TAC lenses is low in price, it is eventually discarded by most well -known foreign brands.

Disclaimer: The above content is derived from the provision of the program system index or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt;Correction & gt; & gt;