Pay attention to the renovation of the sunrise house on the top floor

1. Building Materials selection

The rules and model selection of Steel Structure materials must be fully taken into account factors such as the location, the height of the ground, and the orientation of the ground.Lightning protection, the current building is fully implemented. Generally, there is no lightning strike. Everyone is easy to ignore. On the top floor, you must consider the lightning.The top glass is cleaned. The city in my country is large. It is not transparent to the glass top of the sun room in a few days. It is critical to clean it. It is recommended to open a few skylights on the top surface.Based on load -bearing capacity.There are many aspects such as wind pressure and steel structures in the process of long -term use.Select the steel lining that meets the strength requirements.Steel Structure processing: According to the stress condition of the material.Ensure firm welding.To do a good job of rust, it is recommended to use high -temperature shaping or Outdoor iron to use boiling carbon paint.

2. Anti -rust treatment

glass: The top material is generally tempered glass, including single -layer tempered glass, hollow tempered glass, and safety glass of tempered glue.The roof is fine at the top floor, but if the top floor is built, it will be dangerous if it is too high. Many companies are unwilling to make the top -level sun room too high.Safety, especially top doors and windows.

What are the issues to pay attention to in the transformation of sun room?How to build a sun room on the top of the building is safe?Note at 2 o'clock.It is recommended that you prepare the preliminary preparations of the sun room. The two steps for selection and rust removal. Even if you succeed in the sun room, you can do the best Sunshine room life experience!

precautions for decoration

1. Overdog

For top -level real estate with strong lighting capacity, it is also one of the necessary steps to properly improve the lighting capacity of the room.It is recommended that you set up a sunshine that can be opened and closed outside the main lighting window;;Use curtains with strong shielding effects or laid insulation film on the glass in summer.This is a very necessary decoration method for west -to -high real estate.

2. waterproof

The most prone to the top -level property on top surface waterproof problems.If your home decoration is high and the requirements for decoration are higher.Then it is recommended that you simply spend a thorough maintenance of the waterproof on the roof and conduct a detailed inspection once a year.In this way, you can basically ensure that the indoor decoration is not destroyed by the top surface.

3. Insulation

The insulation performance of the top -level real estate is mostly weaker than the real estate on other floors. Therefore, when renovating the top -level real estate, you should pay attention to the thermal insulation capacity of the house: It is generally recommended that you use the insulation methods such as high -quality doors, windows and indoor soft Bags to create a one for yourself for yourself.winter warm and cool in summer, comfortable indoor living environment.

4. Wind -proof

The house on the top of the building also needs to be windproof.summer storms, so doors and windows must strengthen their firmness.In winter, the wind is Bone, and the windshield needs to be considered.

1. Sunshine roomPC endurance boardHow are you?

1. Advantages of PC endurance board Sunshine room

(1) High light transmission, like glass, is as high as 89%, ensuring that the sun room is combined with nature and sunlight.

(2) Strong compressive resistance. The impact is dozens to hundreds of times of ordinary glass. It has high hardness and is safer than glass material.

(3) The material is lightweight. The material belongs to the plastic material. The material is very light. It can change the shape at will to solve the problem of self -in -law.

(4) Temperature -resistant heat insulation, the surface of the PC endurance board has a UV coating, which can effectively block ultraviolet rays, and for a long time, it is not easy to turn yellow.

2. PC endurance board Sunshine room disadvantages

The PC endurance board is light and requires a certain glass or other auxiliary materials to be thickened to make the plate stronger.In terms of expenses, it is higher than glass.Pay attention to the flat mouth cutting during the cutting period to avoid scratches during installation.

The PC endurance board is a new type of Sunshine room material. The surface UV coating can certainly resist ultraviolet rays and play a role in heat insulation. The materials are not easy to age and turn yellow.It is not prone to rupture and explosion in C. Although the price is more expensive than glass, the PC endurance board does not explode, no rupture, and yellowing.SunshineThe best choice material.

Second, the common problems of the PC endurance board of the sun room

1. Is the PC endurance board an acrylic board?Is it organic glass?

No, PC endurance board is also called polycarbonate board, which is an emerging material in recent years. It is processed by high -performance engineering plastic polycarbonate.The acrylic board is a type of organic glass. The weather resistance, light transmission rate and impact -resistant Biac clan board of PC endurance boards are more advantageous.

2. After a long time, will the PC endurance board be yellow?

The PC endurance board has a UV coating. Under the direct sunlight, the PC endurance board can absorb 99%of ultraviolet rays. It is not easy to aging and yellow. The light transmission rate in 10 years is only about 6%.

3. Will the PC board release a toxic smell?

PC endurance board raw materials are polycarbonate. There is no need to add any substances. UV coating is non -toxic and pollution, and burning will not produce toxic gases.The acrylic board is an organic material, and a small amount of toxic gases will be generated when burning.

4. Deformation as soon as the sun is exposed?Can you crack when you encounter low temperature below 0 degrees?

No, the PC endurance board has the function of high temperature resistance and low temperature resistance, and the performance is stable between 40 degrees and negative 120 degrees.

5. How about PC endurance board?

The PC endurance board has good impact resistance, which is 300 times that of the same thickness of ordinary glass, 30 times that of organic glass, and 20 times that of tempered glass.It can resist hail, snow pressure, and even high -altitude parabolic damage, effectively protecting property and personnel safety.

6. Will it not become a large steamer in the summer?

The K value of the PC endurance board with the same thickness is 7%-25%higher than that of glass, and the heat insulation effect is 7%-25%higher than similar glass.curtain.

7. PC endurance board is not as good as glass?

The PC endurance board's light transmission is similar to the glass, but the impact resistance is 2-20 times that of tempered glass. The heat insulation and sound insulation performance is better than the same thickness glass.

8. How many years are PC endurance board life?

Under normal circumstances, the life expectancy of PC endurance board is 15 to 20 years. If it is properly maintained, the service life will be longer.

9. What is the price of PC endurance board for sun room?

The price of the mobile sun room is calculated according to the development area. The specific price is based on the size and material of the built. The general price of the German imported PC endurance board material is generally 2,500 yuan to 3,000 yuan/Square meter.

10. Will it be noisy on rainy days?

The sound insulation effect of the PC endurance board is better than the same thickness of the same thickness, and the sound will be less sound insulating than the same thickness, so the sound dripping on the sun room will be smaller.

11. Is PC endurance board Sunshine room illegal building?

No matter what materials are used, consult the relevant departments and properties in front of the Sunshine room, and go through the corresponding approval procedures to avoid illegal construction.

Method of the greening room greening

planting flowers and grass on the sun room must also be cleverly matched. Pay attention to the neat and beautiful placement, otherwise the effect will be as messy as weeds.Avoid cluttering, and pay attention to the order of high and low, staggered, and clear Levels. You should also pay attention to leaving a considerable space to avoid making people a sense of congestion.

This requires several ways to place a certain method. For example, when a sun room is used for greening, the flower garden of the sun room must be facilitated to water and manage, but also to make various flowers fully absorb the sun.There are also tricks for plants and plants. There are usually five types: inlaid, Hanging, staircase, natural and embellishment.

1. Inlaid type: It is generally used on the sun room that has been decorated and has a smaller area. It uses a half -pale Flower pot with a wall inlaid with an inlaid component, and then planting leaf plants.

2. Steel type: It is a staircase in the sun room and the three -dimensional pot flower layout. General plants can be cultivated in this form.2 to 3 pots can be placed on the wider railing outside the sun room. Small landscapes made of wood or metals on the east side of the sun room.Put the medium and small flowers, respectively;

3. Pyming type: Plant small plants such as small and exquisite containers, and then hang it on the top panel of the sun.You can also plant vines or other winding leaves.In order to make full use of the space, the hooks are embedded in the sun room table or at the eaves and Hanging the Hanging pot flowers.What flowers are planted in the suspension, depending on the location of the hook.In the sun, it should be planted with gratifying flowers;It is best to plant branches and leaves in the suspension.

4. Natural style: Use pots outside the sun room to plant some wooden vine plants to make the plants droop naturally, forming a natural landscape.A small planting slot is set on the west side of the sun room, and climbing or vines such as climbing tigers, wooden fragrance, fragrant peas, and small luins.Of course, you can also choose plants that need little sunlight, such as Changchun vines, vines golden golden gold, and can be placed in almost anywhere indoors.For the climbing of plants, you can even add a garden art wall as a decorative grid, along a wall along the sun room.

5. Concubine: Sunshine room is like a linked courtyard inner and Outdoor courtyards, metal art and other accessories decoration rooms on the Outdoor house.If this sunshine container adds a small jewelry associated with these flowers and plants, a miniature potted plant with a palm, a crystal clear hydroponic flower, a small fish tank, a Hanging fan, a wind chime ... Hanging in a sunny window can be available.Very beautiful, you may find that you and flowers and plants will be very happy. Your new Sunshine room will be your favorite place to relax in the four seasons of the year.

What green plants are suitable for sunshine houses

Most plants that have good ventilation and sunshine rooms can be raised well, such as Milan, Jasmine, plum blossoms, Plums, Rose, Pomegranate, Gardenia, Shi La Hong, a series of red, lotus, chrysanthemums and dwarf cows, etc.;Tree bonsai such as Su Tie, Banyan, June snow, elm tree, wolfberry, bird plum, yang, liquor, money and pine and cypress;Called half lotus, picana) and fairy -based mountain shadow fist, fairy ball, cactus, aloe vera, etc.

Sunshine room layout renderings

Where is the easiest to leak in the sun room?

1 As well as The connection between the frame and glass and the wall

Because many sun rooms are built on the wall, there are many walls facing walls, so that it is very easy to leak at the connection between the wall and the glass.There are some walls that have inner lining thermal insulation materials. When making shelves, if the ingredients are not close to the wall, and waterproof, it can easily lead to the sun room." Ten nine missions " Essence

2 , Framework construction is not strong

Some irregular sun room production companies cut corners and use non -national standard iron or aluminum pipes. The strength is not enough. The overall frame of the long sun room is deformed, causing the glue to crack and leak water.

3 ,water proof The glue is not selected well or did not fight well

Everyone knows that the Sunshine room is composed of frame, hollow glass, and broken bridges, aluminum doors and windows. The filling between the between it is glass glue, and the brush layer on the wall is exposed to the sun. The paint will gradually fall off and loose.Beat on the wall and glass The adhesive seams were slowly peeling and falling off, and the problem of leakage occurred in the cracks.

4 As well as waterproof glue failure produces cracks

The brush layer on the wall was exposed to the sun, and the coatings gradually shed and loosened. The gel seams that previously hit the wall and glass connection slowly peel and fall off, and the cracks caused water leakage.

Sunshine room leak Seepage Solution

1 After the Sunshine room framework is completed, if there is a place to connect with the wall, it is necessary to remove the coatings on the original wall so that the glue and the wall can be firmly connected.After the glue is tapping, the wall is slotted on the wall above the load, and the raindrop plate can be installed to ensure that the double -layer waterproof is not leaked.

2 The Sunshine room plays a very important role in waterproof. The top of the sun room is generally structural glue and weather resistance. In the gap between the top covering, first hit a layer of structural glue, and then attach a layer of weathering glueThis can make the frame and cover firmly connect.Between the doors and windows and the frame, it is best to give up 3-5mm In the gap, the glue can be sticking to the gap between the doors and windows and the frame, so that the structure is stronger and the waterproof effect is better.

3 The sun room is different from the doors and windows. It is formed by the overall frame structure, and the top of the sun room is generally high, and the force is large. Therefore, you must choose a good quality framework material and pay attention to the quality of construction.

4 The ending of the sun room is important.The glue between the doors and windows and the frame must not be omitted. The joints of the door and window profiles, and the joints between the frames, as long as there is a gap, may leak rain.

How to do drainage in the sun room

1 Reasonable organizationDrainage system

The reasonable organization of the drainage system is mainly to determine the drainage direction of the Sunshine room and the eaves drainage method.In order to quickly eliminate rainwater, the drainage direction of the sun room should be clearly clarified to reduce the turning point.

2 , Determine the appropriate drainage slope

In order to exclude rainwater, the Sunshine room requires a certain amount of drainage slope. The larger the slope, the smoother the drainage.However, when the slope is quite large, it will cause adverse conditions to the construction and structure layout, so it is important to determine a suitable slope according to specific requirements.The slope of the sun room is determined by various factors. Among them, the amount of precipitation in the area, the body shape, size, and structural form of the Sunshine house have the greatest impact on the slope of the sun room.The important factor, in general, the angle between the slope of the sun room and the level is not less than 18 Degree, not greater than 45 It is appropriate.

Classification and design of the terrace sun room

1. Introduction to the terrace Sunshine room

The owners of the villa and the apartment building generally have one or two large terraces. Many owners want to build it into a sunny room. In this way, there is another sunshine space in the home. In winter, even if the sun room does not have heating, it will be warm.Essence

The terrace may not have a large space, but the general glass windows are large and the light is very good.In the decoration of the sun room, it is common to use natural materials and comfortable furniture to allow indoor and Outdoor landscapes to connect naturally here. Generally, it is set as tea rooms, small sports rooms, and play areas to create a more comfortable and romantic leisure space.

The terrace Sunshine room is mainly close to the sun. It connects the indoor and Outdoor space. Therefore, it must not only harmonize the Outdoor space, but also coincides with the overall style of the room to achieve a transition.In addition to the relaxation and resting place in the terrace, it is also a good guest and a leisure area.Put a coffee table and a lounge chair in the terrace Sunshine room. When you want to be quiet, lie here, a cup of strong tea, a lounge chair, a sunlight, one afternoon.How busy this is the leisure life of the city.

A tasteful person will make the color of the living room walk freely between cold and warm, and to achieve casual switching between modern and rural areas in style, and the decoration of a sunrise house in the terrace can achieve this goal and create to create to createLeisurely and self -procurement, entrust a strong cultural plot.

2. Category of Sunshine room in the terrace

The terrace can be divided into Steel Structure Sunshine room, aluminum alloy structure sun room, and wood structure sun room from the material.

It can be divided into three types: ordinary, casual, and functional.

Most of the ordinary terrace sunshine rooms are used as small flower rooms to raise some flowers, birds, fish insects; casual sun rooms are larger than ordinary types, and the structural facilities are better.The sun room is a complex Sunshine room.This type of design and architectural technology standards are relatively high. It can be used in space waiting rooms, small restaurants, study, or children's entertainment rooms.

3. design points

(1) According to the location of the sun room and the height of the floor, the overall wind and pressure resistance of the sun room considers many aspects

(2) According to the orientation of the sun room, consider the duration of sunlight, and make the design of the heat insulation and sunscreen.

(3) Follow the function of the sun room, and do a good job of ventilation and sound insulation.

(4) Select the main framework material according to the user's budget and style requirements.

4. The advantages and disadvantages of various top facial materials

(1) Single -layer tempered glass top:

Advantages: The best permeability is the glass top sun room, and the price is cheap.

Disadvantages: The permeability of glass is not good for insulation and insulation.

(2) Tie glass top:

Advantages: good permeability; safe, glass damage, will not hurt people

Disadvantages: poor sound insulation insulation effects poor

(3) color steel tile top:

Advantages: The insulation and thermal insulation of color steel plates are better and cheap.

Disadvantages: color steel plates are not transparent, color tuning, not grade.

(4) Degao tile top:

Advantages: The roof insulation, good thermal insulation, good thermal insulation, and diverse appearance of the roof composed of DGO tiles and sauna boards are beautiful and beautiful.

Disadvantages: The lighting is not good enough and the price is relatively high.(You can open the sunroof on the top and design tall windows around to help the lighting and ventilation)

(5) The top of the sun:

Advantages: The weight of the material is relatively light, which can effectively reduce self -weight and good permeability.

Disadvantages: Poor durability, and it is easy to get yellow and brittle after a long time.

(6) Low-E hollow glass top:

Advantages: good permeability and good sound insulation and insulation effect, can also block most of the ultraviolet rays and protect the furniture in the house.

Disadvantages: high price.

(7) The hollow glass top of the built -in electric remote control hive curtain:

Advantages: This kind of glass is integrated with a sun -shaped curtain and sound insulation. When it needs transparency, the honeycomb curtain is hidden on the side of the glass. You can't see it. When you need Shading, you can turn it off with one click, that is, you can shade.It can also protect privacy.

Disadvantages: high price

5. Selection of the facade material selection of the terrace Sunshine room

The facade of the sun room is composed of columns, profiles and glass.Generally, the columns are consistent according to the top surface frame material.For example, the top surface frame material is aluminum alloy, and the columns generally use aluminum alloy; if the top -faced frame material is steel, the general pillars will also use Square steel.The spacing of the column should be calculated based on the overall structure and weight of the sun room.

The following types of Sunshine house facade are commonly used:Plastic steel doors and windows;Ordinary aluminum alloy doors and windows;Broken bridge door and window;Aluminum and wood composite doors and windows;

The following types of Sunshine house glass are commonly used:Single -layer tempered glass;Skin -tense tape glass;Gangster hollow glass;Low-E glass;Built -in sunshade louver glass

6. precautions for the design of the terrace Sunshine room

The design of the sun room must be humanized. Pay attention to the safety, waterproof, ventilation, and Shading of the sunrise. The design of the sun room design must obey the overall style of the building and make it a organic component of the building.It can add a lot of color to the traditional architecture, and the design is not easy to say.

The safety of the design of the sun room is also very important. The sun room is also in line with the scientific mechanical structure. It has good load -bearing and wind -resistant stability, and it is simple to use and maintain.

The main material of the decoration of the sun room must be qualified. Although the project of the sun room is not large, the materials contain are various. From the floor to the wall bricks, each one needs to be designed and considered.For example, whether the floor is used to use anticorrosive wood, do the walls need a certain sense of design?

When the owner of Sunshine Fang needs to plant some natural plants in the sun room, pay attention to the choice of plant varieties.For example: If the balcony is south direction, the light is long, and you can raise some beautiful flowers and plants, such as Milan, Jasmine, Hue Sang, Rose, etc.

If the balcony is east or west, it is better to plant some vines, such as Ling Xiao, Morning Glory and so on.If the balcony is northwars, you can plant some shade -resistant or semi -negative plants, such as Wenzhu, Wannian, Turtle bamboo and so on.