1. Provide a display prop for the promotion of the product.

2. Create a promotion environment for the promotion of products.

3. Add a promotional window to the promotion of the product.

What are the size of the advertising Tent?

The size of the advertising Tent is 2mx2m, 2.5mx2.5m, 2mx3m, 3mx3m, 3mx4.5m, and 3mx6m Lights.Among them, 3MX3M is a lot of customer choices because of the moderate size; and more use on the car is 3mx4.5m and 3mx6m.You can choose to customize if you need special specifications.

The advertising Tent is beautiful and generous. The material material is high -quality steel pipe. The surface is treated with high temperature paint treatment to resist corrosion.Simply increased, completed the installation for a few minutes, and the easy -to -carry mobile Tent is suitable for Outdoor exhibitions, exhibitions, celebrations, open -air banquets, tourism and leisure.Noodles, waterproof coating, waterproof and anti -aging treatment are harder, more durable, anti -anticorrosive and other characteristics than ordinary steel, easy to install, carry, lightweight, durable, casual freehand, can be put in the back box of jeep and Camping.

How to use a folding Tent

1. How to open the folding Tent

(1) Take out the top cloth and bracket of the Tent and prepare.

(2) Open the Tent's shelf halfway.

(3) The Tent fabric is on the top of the middle of the shelf. The four corners of the Tent are aimed at the four corners of the shelf, and the magic stickers are tight.

(4) Open the shelf to about 95%.

(5) Four spring buckles on the corner of the Tent are buckled in the eyes of the Square Tube that can be moved up and down. The same step is to complete the four corners.

(6) Pull the inner Tube of the site to a certain height, and then it will automatically deduct it, and add a Tent to install it.

2. How to close the folding Tent

(1) Put your palm down on any diagonal line in the middle, and pat it down, so that the Tent will return to what it looks like before opening.

(2) Unlock the four spring buckles of the corner of the Tent.

(3) Fold the four corners of the Tent and put it into the bag.

precautions for advertising tents

1. Put it lightly when loading and unloading the advertising Tent, do not throw.

2. Pay attention to the packaging. Do not scrape it blindly with a knife, which can easily cause scraping the tarpaulin.

3. Ended upright when the code is put, so as not to stack it to prevent the top of the top from being torn unexpectedly.

4. Check whether the screws of the cross -pipe area should be tightened before using the advertising Tent.

5. When any bracket or variant of the advertising Tent frame is found, it should be stopped immediately for maintenance. After the fault is excluded, it can continue to operate.

6. When a single Outdoor display operation of the advertising Tent is performed, special attention should be paid to the windproof. When the guardian leaves temporarily, the foot of the advertising Tent should be reduced to the first section of the first section, that is, the inner feet are reduced to the insideDestruction.

7. When operating in several Tent tents, the Tent legs that come between the advertising Tent and the advertising Tent should be tied with tie or rope to make it a whole to strengthen its wind resistance.

8. Do not wrap the tape when the legs are bundled, otherwise the tape residues will seriously affect the sliding up and down the Sleeve of the advertising Tent foot.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;

How many categories of trademarks in rope nets

Rope net bag Tent Trademark belongs toTwenty -two categories.

Twenty -two categories include: Rope and thin ropes; nets; tents and waterproof Shading; textiles or synthetic materials to cover tunnels; sails; sacks for transportation and storage of bulk materials; pads and filling materials (except paper or cardboard, rubber, plastic);Fiber raw materials and alternatives.

What does the Trademark of the pocket pocket Tube include

Twenty -two types mainly include canvas and sail -making materials, rope cables, pads, shock absorption and filling materials, and textile fiber raw materials.

This category especially includes:

1, Cables and ropes made of natural or artificial textile fibers, paper or plastic;

2, fishing nets, hammocks, rope ladders;

3, The carrier Tool is non -dedicated cover;

4, Some Bags and Bags that are not classified according to functions or uses, such as: laundry net Bags, corpse Bags, post Bags;

5. Textile Bags for packaging;

6. animal fiber and fiber textile raw materials, such as: animal hair, cocoons, jaoseki, unprocessed or processed wool, raw silk.

This category does not include:

1, Metal rope (category 6);

2, Musical instrument strings (Class 15) and racket lines (category 28);

3, Paper or cardboard cushion and filling (Category 16), rubber or plastic pads and filling materials (Category 17);

4, Nets and Bags classified according to functions or uses, such as: security net (category 9), luggage network (category in the twelfth) of the carrier (category of category), travel pocket (category eighteentSix categories, golf Bags (category 28), sports network (category 28);

5. According to the material classified non -textile packaging Bags, for example: packaging paper Bags or plastic Bags (category 16), rubber Bags for packaging (category 17), packaging Bags (category eighteen) Essence

How to register for the Trademark of the Tent of the Tent

1 As well as The first stage form review

Applicants pay fees, generally3 Submit to the Trademark Office for the Democratic Trademark Office, and the Trademark registration number will be automatically issued the next day.increase from the application date 2 Issuing the "Notice of Acceptance of Trademark Registration Application" in a monthEssence

2 As well as The second stage of substantive review

From the date of application (the date submitted to the Trademark Office)8-9 The procedures for the substantive review procedures for the month (most of the case), the review passed, passed the preliminary review, and entered the announcement period; did not pass it, issued a notice of rejection.

3 As well as The third stage announcement period

1 . Announcement of preliminary review: The Trademark Office will announce the preliminary review and passed the Trademark on its official website (announced three months);

2 . Registration announcement: The Trademark bureau will announce the Trademark of the preliminary review on the official website (announced one month);

3 . The Trademark bureau issued a registration certificate: complete all the registration process here.

The preliminary approved and approved Trademark was appointment after the substantive review was over3 The "Preliminary Trial Announcement of Trademark Registration Application" was published in the "Trademark Announcement" a month.If there is no objection during this time, the "Council Approved Registration Announcement" was published in the "Trademark Announcement", and the date of qualification has been added since the preliminary examination 3 The monthly registration date.

How to distinguish between real and false

1. Look at the materials

Mu Gao DiThe Tent Tent uses 190T waterproof coating polyester polymes single -sided silver and waterproof stickers; the inner account material uses 190T breathable polyester; The head plastic parts is integrated in injection, and durable.

2. Look at the design

The arc design on both sides of the outer Tent and the arc design on the top of the Mu Gao Tent form air exchange, which increases air exchange, and the breathability is not stuffy.On rainy days, it can prevent rain drops from splashing, while reducing the wind of the head and feet directly, protecting the head and feet is not cold, and can increase the insulation of Sleeping bags.

Is the Mu Gao Tent, okay?

1. Good ventilation

The Mu Gao flute Tent has a curved breathable design on both sides of the foreign account, and can freely regulate the distance between the external account and the inner account according to the weather conditions to achieve the degree of rain and ventilation you want.The arc design on both sides of the top Tent forms an air exchange, which increases air exchange, and the breathability is not stuffy.

2. Yi Zhankai Easy to Start

The Mu Gao flute Tent has the latest research and development professional integrated connection rod and the top Sixun design. With the special Hanging point of the Tent's apex, the guidance type construction method can be used to quickly support the Tent.

3. Light weight, easy to carry

The lightweight design concept effectively reduces the weight of the Tent, uses lightweight materials, simplifies the internal structure, and removes unnecessary design. sex.

[Mu Gaosi Mobigarden Tent purchase & gt; & gt;]

1. Can the tarpaulin be the scene of the day?

The sky curtain is the sky curtain Tent. It is an Outdoor Tent. Compared with ordinary tents, the sky curtain Tent not only plays a role of Shading and rain, but also opens and ventilated.

The Tent cloth is a cloth with functions such as waterproof, windproof, and moisture -proof. It can be used as a sky curtain. After all, the essence of the sky curtain is actually a waterproof cloth.The shape of a kind of shape can be done with a Tent cloth instead.

2. How to use a Tent cloth to make a simple sky curtain outdoors

The canopy can be used on the day. Here are several methods to introduce several Tent tents with tunnels:

1. Type A asylum

Type A framework sky curtain is a very classic, and it is easy to use.building steps:

(1) Pass the wind rope from the middle of the tarpaulin.

(2) You can fix it directly on the tree and straighten it.

(3) Tighten the four corners of the sky with wind rope.

(4) Fix the wind rope with ground nails, or nail the four corners directly on the ground.

2. Single -sided tilt sky curtain asylum

Single -sided tilt sky curtain is also a construction method that is easy to get started and can be completed quickly.building steps:

(1) Pass the support rod through the waterproof tarpaulin.

(2) Raise the support rod and fix it; you can also fix it on the tree directly with the rope and straighten it.

(3) Fold the tunnel on the support rod and fold and overlap. The folding and overlapping tunnel of about 30 degrees is tightened and fixed with the ground nails with a pull line.

3. Adi Langdak asylum

Adi Landak's asylum is a construction method named after the Adprit Mountains.

(1) The tarpaulin is spread into diamonds, nailed to the second lace ring on both sides, leaving a triangle above it.

(2) Pull out the two front angles and align them with the rear, connect the remaining two corners to the pull rope, and leave a triangle on the top.

(3) Use another pull rope to connect the remaining triangle to the front ground to form a small lid.

4. C -shaped flying wedge asylum

The shape is like an English letter C, and a hollow wedge, set up steps:

(1) Place the waterproof tarpaulin on the ground and fix the long side of the tarpaulin on the ground with 2-4 ground nails.

(2) Pull a ridge line between the two trees, and then fold the remaining tunnels on the ridge line.

(3) The remaining part of the tarpaulin on the ridge line is fixed with a rope.

5. Flat roof tilted asylum

An asylum that can provide more protection and larger space, and the tilt side helps the rain.building steps:

(1) Tie a rope on two trees as the roof line.

(2) Use 2 sticks or poles to support the roof of each corner on the other side.

(3) Cover the taron to the roof line and fix it on the support rod. The other side of the roof line is redundant.

(4) The four corners of the roof are tightened and fixed with pull rope.

(5) The tarpaulin at the slope position is fixed on the ground directly according to the angle of about 60 degrees.

6. Half -box asylum

Half -box asylum is a way to build two windproof protection faces and a rain cover.building steps:

(1) Fold the tarpaulin, nail a corner first, then nail on the ground in the middle, and then fold the tunnel 90 degrees angle and nail the other angle on the ground.

(2) Wed in the ground position in each corner of the waterproof pupa in the waterproof pupae and fix it.

(3) Fix the four corners above the tarpaulin on the support rod.

7, rectangular asylum

Similar to the flat roof lesm, the only difference is the vertical side.building steps:

(1) Put the waterproof tarpaulin on the ground and mark the two corners.

(2) Insert the support rod into the mark position.

(3) Fix the waterproof canopy cloth on the support rod.

(4) Put the tarpaulin on the rope between the two trees.

8. The ridge line tilted asylum

Like two slopes built along the ridge line, as well as roofs in Chinese architecture.Construction method:

(1) Pull the rope between the two trees.

(2) Fix the waterproof tunnel on one side and half -landing.

9. Basic roof sky curtain

A four -pillar landing fabric.Construction method:

(1) Put the tarpaulin flattening, and the four corners are connected to the support rod.

(2) Establish the support rod and fix it with a line and ground.

10. Picnic Sky

Very popular sky -to -screen construction method, enough space is suitable for placing tables and chairs for Picnic.Construction method:

(1) Put the taron in the center of the horizontal rod.

(2) Tie the two points and vertical rods at the middle crossbar in the middle of the tarpaulin.

(3) After supporting the vertical rod, fix the vertical rod and the tarpaulin with the tape rope and the ground nails.

1. What is a Tent

The Tent is a new type of Outdoor activity originating in Europe for temporary buildings, also known as European tents, and is lightweight. It is called "mobile real estate".It is widely used in temporary warehouses, factory buildings, temporary construction, exhibit tents, tenthouses, and emergency disaster relief.The Tent is a new concept for the international masses. It is also gradually appearing in people's daily outdoor activities in recent years., Convenient storage, small volume and other characteristics.

2. What are the characteristics of a Tent

1. Flexible and convenient

It is easy to install and disassemble, and the venue is free to choose in different environments.

2. Safe and stable

Aluminum alloy framework, steel parts connection, PVC tunnel high -frequency welding, base fixation, and strong mechanical properties.

3. Complete service

Pre -sale, sales, and after -sales tracking service, the problem will be feeded and resolved as soon as possible.

4. Satisfied personality

It can be designed and produced according to demand, producing a Tent, elegant appearance, and providing corresponding supporting facilities (hardware walls, high partitions, top curtains, edges, flooring, furniture, lighting, air conditioning, mobile toilet, European fence)

5. Wide applicable

Commercial exhibitions, festivals celebrations, catering and entertainment, logistics and storage, Outdoor leisure, convenience municipalities, etc., all kinds of Outdoor temporary activities are useful.

What are the types of tents?

There are many styles of the Tent, which can be divided into three types according to different appearances:

1. A -shaped Tent

The A -shaped Tent is also known as an activity Tent, which is the most widely used, and it can be used from Outdoor business to large exhibitions.

2. Scoop Tent

The bottom surface is Square, and the top of the canopy is like a tower spire, with an elegant appearance.

3. Ballical Tort

The dome is called "the strongest space, the lightest, and the most effective design."With a rigid and stable architecture, you can temporarily suspend light and audio equipment to decorate and fill your activity space.

4. There is also a type of Tent mixed with the characteristics of A -shaped tents and scoop tents.

Fourth, how to do the Tent

1. Positioning the bottom plate of the column

First determine the flat ground at the installation site, then position the bottom plate to determine the position of the four bottom plates and then measure whether the distance between the diagonal line is equal.If you are not equal, you must re -adjust the position. Be sure to ensure that it is a rectangular rather than a parallel quasoplasty.After better, fix the column bottom plate in the corresponding four positions, and use the same method to better and fix the other bottom plates of the length direction.

2. Place a good part

Section A section A, angle node, diagonal beam A, and diagonal beam B (two -section oblique beams with more than 14 meters), oblique beam undertaking parts (connected to section A section A and oblique beam B, 14There are no components below the rice span), the top nodes are placed, and all components form a gables. Putting other gable surface components in the same principle is placed in the same principle. Note that it must be placed on the ground in one direction.

3. Connect the diagonal beam A/B section

Insert the oblique beam A section A into the oblique beam to undertake, and tie them into two screws (Note: the small hole will not be installed first)

4. Install top nodes

Connect the connected diagonal beam AB section with the top node, the screws tied into, and tighten.If it is the first gear, you must also install the wire flower cable, and install the buckle on the one -end of the flower cable without flower cable on the second hole in the section B section B.Use this method to install all the top nodes and oblique beam AB sections.

5. Install corner node

Insert the oblique of the corner node into the section A section A, connect the upper end of the column to the straight end of the corner node, and penetrate the screw and screw the nut.If the wire flower cable and the cross rod are installed, the hole is installed with a hole on the top of the corner node, and the hole is installed with the hole in the lower end of the corner node.In the same way, install other corner nodes.

6. Connect the column and the bottom plate

Put the lower plug -in holes on the column to the screws connected to the holes on the bottom plate and tighten the nut.The same method connects other columns and columns.Note that the entire installation process must be gently put in lightly, and it is necessary to use wood to pad the assembled gables. When moving aluminum materials, be sure to lift the entire frame to avoid aluminum and sand and other sand and other sand and other sands on the ground.Item friction causes the surface of the aluminum material.

7, vertical mountain wall

All personnel are divided into four teams, two people pull steel ropes, and two people stand at the corner nodes. Others stand at the apex, lift the gables up, and lift them to a certain height.Continue to lift up.People who pull the steel wire rope should also pull up the gables up.

When the entire gables are erected to 70 degrees, they must stop, and then slowly stand vertical with the ground. At this time, the person who pulls the steel wire rope stood a slightly stable on the top.At the same time, several people have to support the pillars.Two people install the flat iron end of the cross rod to the screw below the upper end of the column, and tighten the nut.Connect the other end of the cross rod to the bottom hole below the bottom plate of the adjacent second gables, penetrate the screw and tighten the nut.Pose a second gable in the same way and install two other cross rods.

8. Install beams and bars

The cross -section shape of the beam is house -shaped, and the cross -section shape of the strip is Square.The hooks of the beams or bars are ended up, and then the hook end is tilted to the U -shaped ears on the corner node or in the -shaped iron on the corner node.Use a ladder to slowly lift the straight hook end of the beam/bars and hang it into the ears of the gables or corner nodes on the side of the hook.Under normal circumstances, there are three beams between the two gables, namely one end of the two ends and one in the middle of the middle. The bars increase or decrease according to the size of the span.

9. installation

Connect the middle support to the small hole in section A in section A, insert the screw, and tighten the nut.After installing the middle support, hang the side beam into the corner node and the middle -supported Hanging ear.Note that when the side beam is Hanging, be sure to install it from the side of the side beam, first hang the side beam accessories into the Hanging ears in the corner node, and then slowly lift the straight hook end to install it to the middle support Hanging Hanging on the hook above the support.In the ear, remember not to install the straight hook end first, otherwise the installation is unsuccessful.Like the beams and bars, you must first install it from the hook end, and then hang the straight hook end.

10. Install the top

Put on the hemp rope at both ends of the top of the top, and the strap is in the Tent.Then stuff the tape on both sides of the top end of the cloth into the slot of the diagonal beam, and throw the other end of the hemp rope from the entire frame of the Tent, and then pull the four people to the hemp rope at the same time, so thatThe groove slowly pulled to the opposite side.Remember to pull it hard at the same time, otherwise the top will be stuck and causing pulling. To solve this problem, you only need to pull back the top back to a certain position and then pull it back again at the same time. Be sure to go forward at the same time.The same method is used to pull other top tops.

11. installation side triangle

Similar to the installation cloth top also needs to use hemp ropes, but when installing the side triangle, someone must stand to the side of the (high ladder) top node. The only difference is that the strap of the side triangle is outside.First put on the side triangle into the slot of the diagonal beam, and then the people standing in the middle pulled up to the hemp rope. At the same time, when standing at the corner node, the side triangle was lifted to lift the side triangle to let the rubber strip go up the groove.When installing the side triangle, be sure to pay attention to the left and right points, do not install it.After pulling the two side triangles, the middle seam Tube is slowly pierced from the lower end between the two side triangles (a section of the rubber strip is cut off slowly (the middle seam Tube has a flat iron inside).When you put it on the top node, hang the flat iron into the ears of the top node.

12. Install the curtain

Open the curtain, facing the front (there are ropes or covers on it), first put the rubber strip into the pillar to milling.Then slowly pull up the top, plug the codes into the gap in the beam milling slot. Pay attention to stuffing one by one in order.Put in down, pull the curtain to the middle, and place the side of the rope on the side of the tun ring, and connect the rope from top to bottom.

13. Install the top pressure rod

Put the top pressure rod into the crusher cover of the top of the cloth (that is, there is a double -layer Sleeve at the top of the top of the cloth, then put the end pressing iron in the press, and put the rectangular screw in the seamless pipe of the angle node.The last step is to plug the crusher of the surrounding curtain into the bottom of the rod at the bottom of the curtain to prevent the wind from blowing the curtain.

5. precautions for Outdoor exhibition canopy

1. Selection of the venue

We all know that today's Tent products do not have too high requirements for venue conditions. Generally, the flat ground can be easily built, as well as Outdoor exhibition tents.However, in order to hold the activity safely and orderly, we still need to investigate the environment of the surrounding venue before the Outdoor Tent was built, and prepare the solution in advance according to the actual situation, so as to ensure the normal construction of Outdoor exhibition tents!

2. Determine the size and measure the venue

After we confirm the conditions for building the site, we also need professional staff to carry professional tools to the venue for measurement.If the site conditions are found to be unfavorable, you need to adjust it in time, and finally determine the Tent specification plan and fixed method.

3. Verify the time of use

After confirming the above two points, we also need to confirm the time when we need to use a Tent.In this way, a canopy manufacturer can arrange production plans, stocking, transportation, and construction based on the actual situation.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is valid. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; error correction & gt; & gt;