Wall lamp daily cleaning method

1. The Wall lamp is easy to accumulate dust, and regular dust removal can be maintained to maintain good lighting effect.You can wipe it with a wet cloth, keep the action in the same direction, do not rub it back and forth, and the strength should be moderate.Turn off the Lights inside the cleaning light and remove the bulb.

2. Inside the Wall lights, when cleaning the bulb, first turn off the Lights, and you can remove the Light bulb and wipe it separately when wiping.If you clean it directly on the lamp, do not rotate the Light bulb in clockwise to avoid tightly peeling the lamp head.

How to clean different material wall lamps

1. Cloth lampshade

Wash the fabric lampshade with a soft brush, you can remove the fabric lampshade, and stick to the cleaning agent with a lower concentration on the soft brush, and then scrub the dust on the fabric lampshade. This method is not only simple, but also the wall lampshade.No damage.

2. fruits glass lampshade

Use a soft cloth suitable for cleaning the glass, be careful of the lampshade of the wall, or scrub it with a soft cloth dipped with a toothpaste. You can use a soft cloth to wrap chopsticks or toothpicks.

3. Resin lampshade

It can be cleaned with chemical fibrous tweezers or dedicated tweezers. After cleaning, anti -static spray should be sprayed, because the Wall lights of the resin material are prone to static electricity.

4. Fold lampshade

The fold lampshade Wall lamp can be scrubbed with a cotton swab dipped in water. If it is particularly dirty, a neutral cleaner can be used.

5. crystal beaded lampshade

crystal beaded wall lamps are delicate and exquisite, and clean is very troublesome.If the lampshade is made of crystal beads and metals, it can be cleaned directly with neutral detergent.After cleaning, dry the surface of the surface and let it dry naturally.

Wall lamp maintenance method

1. The wall installed on the wall is to pay attention to whether there is a water seepage to avoid the Wall lights from falling off.Do not frequently switch when used to avoid affecting the service life of the Wall lamp.

2. Frequent switching wall lamps will greatly reduce its service life, so try to reduce the switch of the lamp when using wall lamps.

1. The advantages of the LED Solar Lamp Tube

ledThe fluorescent lamp Tube is the same as the traditional fluorescent lamp Tube in appearance, and the length is available.60cmand120cmAs well as150cmThree types, their power is respectively8WAs well as9WAs well as10WAs well as12WAs well as15WAs well as16Wand20W,and60cmThe actual power consumption of traditional fluorescent lamps is26W,,120cmThe actual power consumption of traditional fluorescent lamps is45WItemsledThe fluorescent lamp Tube only has traditional lamps40%It is an efficient and energy -saving lighting product.

advantage:

1. Environmental protection lamps to protect the earth

The traditional fluorescent lamp contains a large amount of mercury steam, and if it is crushed, it will volatilize into the atmosphere.However, the LED sunlight does not use mercury at all, and the LED products do not contain lead, which plays a role in protecting the environment.

2. Efficient conversion to reduce fever

Traditional lamps produce a large amount of thermal energy, while LED lamps are converted into light energy, which will not cause energy waste.And it will not produce the phenomenon of degradation for files.(This sentence requires professionals to adjust. LeD will also produce heat, and heat will cause LED light decay, so it is necessary to strengthen the heat dissipation function of LED lamps)

3. Quiet and comfortable, no noise

The LED lamps do not produce noise. It is the best choice for the use of precision electronic instruments.Suitable for library, office and other occasions.

4. The light is soft and protects the eyes

The traditional fluorescent lamp uses 220V AC power, so it will generate 100-120 times per second.The LED lamps directly convert the AC power to DC power, which will not produce flashing and protect the eyes.

5. No ultraviolet rays, no mosquitoes

LED lamps do not produce ultraviolet rays, so compared with traditional lamps, there are fewer mosquitoes around the lamp.The room will become cleaner and neat.

6. Voltage range: 80V -245V

The traditional fluorescent lamp is lit by the high voltage released by the rectifier, and it cannot be lit when the voltage is reduced.The LED lamps can be lit within a certain range of voltage, and the light brightness can be adjusted.

7. Save energy and live longer life

The power consumption of the LED fluorescent lamp is less than one -third of the traditional fluorescent lamp, and the life span is also 10 times that of the traditional fluorescent lamp. It can be used for a long time without replacement, reducing labor costs.It is more suitable for difficulty in replacement.

8. Strong and reliable, long -term use

The LED lamp itself uses epoxy resin instead of traditional glass, which is stronger and more reliable. Even if LED is smashed on the floor, it will not be easily damaged and can be used with confidence.

9. Simple installation

During the installation, remove the original fluorescent lamp to the LED fluorescent lamp, and remove the ballast and the ripplane.

two,LED fluorescent lamp energy saving effect

15WLEDThe brightness of the sunlight is more than the traditional40WThe sunlight is still bright,18W LEDThe fluorescent lamp is more than traditional64WThe sunlight is still bright,ledThe brightness of the sunlight is particularly softer and easier to accept.Life life5Ten thousand-8The power supply voltage of 10,000 hours isAC85V-260V (comminicateCureThere is no need to start with a gifted device, start fast, small power, no flickering, and not easy to see fatigue.It is not only super strong and energy -saving.It is one of the products developed by the National Green engineering and is the main product to replace the traditional fluorescent lamp.Low power consumption, saving60-80%Electricity is better than traditional fluorescent Tube.

three,ledfluorescent lampScope

It is suitable for most indoor lighting applications, such as family, hotels, shopping malls, office spaces, schools, parking lots, warehouses, factories, supermarkets, channels, corridors, advertising boxes and other indoor lighting.

Four, LEDLight lamp wiring diagram

1. There are two types of wiring methods for traditional fluorescent lamps: electronic zone, inductive town flow.The wiring diagram is as follows:

2. LED fluorescent lamp Tube wiring method: Remove the tingler and (or) gobinial device, and connect the fire line and the zero line to both ends of the bracket, as shown below:

installation instructions:

1. Remove the Qihui and rectifier, and connect the city's fire lines and zero lines on the left and right ends of the bracket respectively.

2. The LED lamp Tube is a built -in power supply, the G13 interface has a short -circuit state, and the interfaces of both end are consistent.

[Sanitary Mirror front light] cleaning method of maintenance common sense of bathroom mirror front lights

maintenance of the front Lights of the bathroom mirror

1. When cleaning and maintenance, be careful not to change the structure of the lamp, and do not change the components of the lamps casually. After the cleaning and maintenance is over, the lamp should be installed according to the original.

2. Wipe the lamp with a dry cloth, and pay attention to preventing the moisture invasion, so as not to occur for a long time.

3. The lamp installed in the toilet and bathroom must be equipped with a moisture -proof lampshade, otherwise it will greatly shorten the service life.

4. In addition, it is not allowed to hang items or baked clothes on the lamp.

cleaning of the front light of the bathroom mirror

1. It is best not to clean it with water. Just wipe it with a dry cloth. If you accidentally touch the water, dry it as much as possible. Do not wipe it with a wet wipe with a wet cloth immediately after the light is turned on.

2. In terms of cleaning, the lampshade of the cloth cannot be flushed. It can be used in a dry cleaner. If it is made of glass, it can be washed with water. Just wipe the skeleton of the lamp.

3. cleaning the front light of the mirror with vinegar is a good way.Pour the amount of the beer bottle cap in the half pot of water. After mixing it, soak the rag in the vinegar water, and the rag that is twisted to wipe the dust on the lamp.Because vinegar has the effect of cleaning and preventing static electricity, the lamps wiped with vinegar are not only bright but not easy to dip the dust.

4. When cleaning the light body, wipe it gently with a soft dry cotton cloth. The movement should be kept from top to bottom. Do not rub it back and forth.When cleaning the lampshade, it is advisable to use clean chicken feathers to prevent the lamp cover or deformation.

What kind of categories are there in the front Lights of the mirror

1. The front Lights are divided into materials: the front Lights of the mirror are the same as other lamps. They are mainly iron, copper, gold -plated, aluminum, acrylic, fabric, stainless steel and so on.

2. The front Lights are divided into light sources: G4 halogen lamp beads, E27 light sources, E14 light sources, T4 lamp Tube, T5 lamp Tube, G4 energy -saving lamp, LED and so on.

3. The front Lights are divided into style: European style, modern, Chinese.

What kind of comparison of the front lamp selection

1. style matching

The first is to pay attention to the style of style. The color, shape, and style of the front Lights are best echoing each other in the interior decoration style.When buying the front Lights, you need to consider whether the style of the front light is matched with the style of the bathroom decoration and the style of bathroom furniture.You can choose warm light on the light source. The warm light does not affect our lighting, but also makes our indoor atmosphere softer.

2. lighting light source

The light source of the front lamp affects our use effect, because the light source of the front light of the mirror is different, and the color temperature is different. It will show different decoration effects.In terms of the selection of light sources, the light sources currently used in the front lamp are mainly incandescent lamps, LED lamp beads, and energy -saving lamps.The light of LED lamp beads is generally more natural and can normally reflect the effect of the mirror, but LED lamp beads also have its disadvantages. The lighting of LED lamp beads is cold than energy -saving lamps. Consumers can according to their preferences and needs.Come and buy.

3. Detail safety

In the process of purchasing the front Lights of the mirror, you need to pay attention to the choice of its light sources, but also to understand any details such as switching and sockets.In addition, because the lighting is fragile, if the lamp glass has a trace of rupture, a safety accident may occur during use. Therefore, when buying the front Lights of the mirror, remember to pay attention to whether the lamp itself has defects and damage.When buying the front Lights, it is recommended that customers try to choose products such as 3C certification, ISO9000 quality system certification, etc.

4. Electronic ballast

Pay attention to the electronic ballast of the front light of the mirror. The fluorescent light source needs to be lit. The electronic ballast is the core part of the lamp.Once there is a problem with the ballast, it also means the end of the life of the lamp.Therefore, in the process of buying the front Lights of the mirror, we must choose carefully. It is recommended that customers choose regular manufacturers to purchase.

Several common mirror front lights

1. Hurbing lamp

The incandescent light sources are small, and the form and shape of the lampshade will not be too picky, and the universality is relatively large.However, incandescent lamps are more energy, and 95%of the electric energy will consume it in heating, and the life span is short. It is used for the low cost performance of the front Lights of the mirror.

2. Light lamp

The fluorescent lamp is released by the fluorescent substance of the inside of the lamp. The visible light is released after absorbing ultraviolet light. The conversion efficiency of the fluorescent lamp is generally twice the same power incandescent lamp. In general, it is high in light and long life.

3. LED light

LED lights are also called light -emitting diode. It will emit energy in the form of photons. Compared with the previous light sources, the advantages of LED lights are more comprehensive, with small volume, low power consumption, and long life. It is gradually applied from Outdoor Decoration to home lighting.The price of LED lights is expensive. If it is used for the front Lights of the bathroom mirror, you can consider it again.

[LED mirror front lights] How to pay attention to when using the LED mirror front lamp in the LED Mirror front light

LED lights are becoming more and more popular, so there are already manufacturers to make the LED mirror front lights with a set of mirrors and bathroom cabinets, so installation is relatively simple after buying.However, there are still many mirrors or bathroom cabinets designed separately. Those who want to install the front Lights of the mirror need to be purchased and installed by themselves.

How to choose the LED Mirror front light

1. The light source tile number should be selected.The LED mirror headlights are generally small on 7W, 10W, and 10W applications are more common.The LED mirror front lights are used for a few watts, depending on the size of the bathroom.The general household lighting is calculated according to 0.7w-1W/Square meter.

2. When choosing, look at the size and style of the mirror.If you want to choose integrated Lights, measure the width size of the mirror, and there are some independent Light bulb styles, and the number of choices should be more.

The shape and style of the front lamp are more diverse, and the style has color and monochrome. It is selected and adjusted according to the overall style of the bathroom.

3. There is also the choice of lampshade. The brightness of LED lights is generally relatively high. The lampshade of different processes can strengthen or weaken the strength of the light.Compared to the mirror surface, the frosted LED mirror front lights are not so dazzling, and the light is softer. This depends on personal choices. If you are afraid of darker, you can choose the mirror.

What should I pay attention to when using the LED Mirror front light

LED mirror front lights are different from the structure and glow of ordinary lamps, so the maintenance of LED energy -saving Lights is different from the maintenance of ordinary Lights.

1. It is generally seen that the LED's service life is relatively long, which is also relatively suitable for the suitable use environment.The instant pulse will destroy the fixed connection of the LED, so do not frequently switch when used as a bathroom front light.

2. ELED light should pay attention to moisture-proof. Generally, the LED energy-saving light is required to store the temperature of -40 C -100 C, and the relative humidity is below 85%.After the packaging bag is opened, the relative humidity is below 60%, so the bathroom should maintain good ventilation and cleaning.

3. Any behavior of squeezing resin may damage the metal wire inside the LED energy -saving lamp, so you cannot use the unknown chemical liquid to clean the LED Mirror front light, which may damage the surface of the lamp body resin and even cause collagen cracks.If it is cleaned thoroughly, soak the LED Mirror front light into the alcohol at room temperature and grasp the time within one minute.

The LED Mirror front light is a new fashion decorative in the bathroom space, but the price is tens to hundreds of, which is very different.LED Mirror front light chips are small and fast at decay. Do not fall into the low -cost trap of the merchant.