Where is the easiest to leak in the sun room?

1 As well as The connection between the frame and glass and the wall

Because many sun rooms are built on the wall, there are many walls facing walls, so that it is very easy to leak at the connection between the wall and the glass.There are some walls that have inner lining thermal insulation materials. When making shelves, if the ingredients are not close to the wall, and waterproof, it can easily lead to the sun room." Ten nine missions " Essence

2 , Framework construction is not strong

Some irregular sun room production companies cut corners and use non -national standard iron or aluminum pipes. The strength is not enough. The overall frame of the long sun room is deformed, causing the glue to crack and leak water.

3 ,water proof The glue is not selected well or did not fight well

Everyone knows that the Sunshine room is composed of frame, hollow glass, and broken bridges, aluminum doors and windows. The filling between the between it is glass glue, and the brush layer on the wall is exposed to the sun. The paint will gradually fall off and loose.Beat on the wall and glass The adhesive seams were slowly peeling and falling off, and the problem of leakage occurred in the cracks.

4 As well as waterproof glue failure produces cracks

The brush layer on the wall was exposed to the sun, and the coatings gradually shed and loosened. The gel seams that previously hit the wall and glass connection slowly peel and fall off, and the cracks caused water leakage.

Sunshine room leak Seepage Solution

1 After the Sunshine room framework is completed, if there is a place to connect with the wall, it is necessary to remove the coatings on the original wall so that the glue and the wall can be firmly connected.After the glue is tapping, the wall is slotted on the wall above the load, and the raindrop plate can be installed to ensure that the double -layer waterproof is not leaked.

2 The Sunshine room plays a very important role in waterproof. The top of the sun room is generally structural glue and weather resistance. In the gap between the top covering, first hit a layer of structural glue, and then attach a layer of weathering glueThis can make the frame and cover firmly connect.Between the doors and windows and the frame, it is best to give up 3-5mm In the gap, the glue can be sticking to the gap between the doors and windows and the frame, so that the structure is stronger and the waterproof effect is better.

3 The sun room is different from the doors and windows. It is formed by the overall frame structure, and the top of the sun room is generally high, and the force is large. Therefore, you must choose a good quality framework material and pay attention to the quality of construction.

4 The ending of the sun room is important.The glue between the doors and windows and the frame must not be omitted. The joints of the door and window profiles, and the joints between the frames, as long as there is a gap, may leak rain.

How to do drainage in the sun room

1 Reasonable organizationDrainage system

The reasonable organization of the drainage system is mainly to determine the drainage direction of the Sunshine room and the eaves drainage method.In order to quickly eliminate rainwater, the drainage direction of the sun room should be clearly clarified to reduce the turning point.

2 , Determine the appropriate drainage slope

In order to exclude rainwater, the Sunshine room requires a certain amount of drainage slope. The larger the slope, the smoother the drainage.However, when the slope is quite large, it will cause adverse conditions to the construction and structure layout, so it is important to determine a suitable slope according to specific requirements.The slope of the sun room is determined by various factors. Among them, the amount of precipitation in the area, the body shape, size, and structural form of the Sunshine house have the greatest impact on the slope of the sun room.The important factor, in general, the angle between the slope of the sun room and the level is not less than 18 Degree, not greater than 45 It is appropriate.

one,How to do sun room waterproof

1,Roof

Before solving the water, we must design the slope and orientation of the roof, and determine that the slope and the orientation will analyze the two ways to lower the water:

Directly lead to the ground

The premise of this method is that the roof is not high from the ground, and there is no obvious obstacles on the ground (flowers and plants, garden, gazebo, etc.). Do not "do not make high buildings."

Water pipe drainage

This method is very beautiful and safe. It is more reasonable. Usually, the method is to cover the top surface. Put the sink around the top surface, put the funnel, and drain the water pipe to the water channel that the house is originally made.The funding may be high, but it is safe and reliable, beautiful and practical.

2,Roof waterproof

color steel plate cover top waterproof

The nail eyes should be blocked with glue. The nail eyes I call are nail in the dovetail. The boards must be fixed. You must nail with the tour tail, and you must not run away.If you do nt need to be sealed by the dumplings, the water will flow into the house along the nails. In fact, this is also one of the main reasons for the leakage of the sun room.

waterproof treatment of color steel plates and walls. When the board is covered, the gap between the board and the wall is the most serious place in the sun room.First use the foaming agent to inject the bulging. After it is dry, use a wallpaper knife to cut it flat, and then use a good waterproof glue to scrape it. Finally, make a custard and waterproof.

Material waterproof

Use shock absorption pads in the location of the hollow glass and window frames, and then fill in a sealing glue.However, the sealing materials are easy to fail under the erosion of wind, rain, and snow, cracks, and crispy.In addition, sealing glue is sensitive to ultraviolet rays and is easy to get aging.This sealing material usually fails after two or three years, resulting in leakage of the sun room.

Structural waterproof

EPDM rubber strip, sealing tape, striving for strong steel plates and aluminum alloy profiles and hollow connection methods determine the scientific nature of this method. Therefore, this waterproof effect is excellent. Even if the tape is agingWhat happened.

2. What materials do Sunshine room waterproof

What to use

The Sunshine room is composed of frames and hollow glass, broken bridges, aluminum doors and windows, and the filling is glass glue.The Sunshine room has a very important role in waterproofing waterproof. The override seams on the top of the sun room frame, and the facade doors and windows and frameworks depend on the waterproof treatment of silicone gum.

The top of the Sunshine room is generally used in structural glue and weather resistance. In the gap between the top covering, first hit a layer of structural glue, and the fullness is about two -thirds of the gap, and then attached to the Issuance of Time -to -weather glue.EssenceThe reason is that the structural glue is highly connected, which can firmly connect the frame and coverage, while the weather resistance and anti -corrosion capacity are strong, and can experience the sun exposure of rain and sun.

waterproof asphalt tile

Advantages: Various shapes and wide range of applications; roofs are light, safe and reliable; simple construction, low comprehensive costs; durable, non -broken worry; rich colors, beautiful and environmentally friendly; waterproof, corrosion resistance; wind resistance, dustproof.

Disadvantages: easy to get aging, and the service life is only 10 years; the flame retardant is poor, and as soon as it encounters a large wind, it will be blown off.

Hydrophilic insulation

waterproof thermal insulation plates are low, and the moisture absorption rate is usually close to zero.Light and soft, compared with other thermal insulation materials, the quality of glass fiber needles is the lightest and softest.

glass room waterproof sticker

Paste the gap in the waterproof sticker. It is very simple.This waterproof patch has super waterproof, water resistance, and durability, which can not only waterproof and seal, but also take into account both visual aesthetics.Not only that, it can also be used to replenish the roof joint seams, windows, and water pipes.

When paste the waterproof tape, pay attention to laying it in the middle, and it must be in place at a time. It is difficult to tear it off once it is pasted.After that, it is best to use a scraper to remove all the air bubbles in the tape. The connection between the tape and the tape should overlap together to ensure that each gap is covered with all the gaps, so that the sun room can no longer leak water.

3. How much is the waterproof waterproof of Sunshine room

The price of the roof waterproof is determined based on the waterproof materials purchased.It depends on a few materials, whether it is a non -benchmarking material or a national standard material.More than 10 yuan cheap people do it.For qualified, all materials are about 40 yuan.

In terms of traditional SBS modified asphalt coils, there are more than 100 yuan to 600 yuan.have.The cost of the material accounts for about 60 ~ 65%.