1. What is the carbon machine equipment

The charcoal machine is the raw materials such as bamboo and wooden sawdust, Peanut shell, corn stick and other raw materialsCrushed into a granular shape within 10mm through the wood chips crusher. After drying the dryer, put it in a carbonized furnace for charcoal machine. The full set of equipment of the charcoal machine includes a pieces, a dryer, a stick maker, a charcoal furnace, conveying, and conveying.Planet and other.charcoal mechanismcharcoalIt is a kind of waste renewable energy fuel, smoke -free and non -toxic, clean and hygienic, which can be widely used in the field of home heating and barbecue food; industrial aspects can also replace coal or heavy oil -boiled steam boilers.crystal silicon and other materials; agriculture can also be used to improve ground temperature and improve the soil.

2. What is the working principle of charcoal charcoal machine

The charcoal mechanism uses some waste, such as branches, straw, straw, Peanut shell, tree trunk, cotton straw, tea seed shells, fruit shells, weeds, leaves, etc. These substances contain biomass fiber that can produce charcoal.It was crushed to a powder below 10mm by the pieces, and then dried 88 % of the water through the dryer. After the entry rod machine was put in a carbonization furnace for carbonization through high temperature and high -pressure molding, and finally transported the finished mechanism of charcoal by the conveyor.

3. How much is a charcoal machine equipment?

The price of charcoal machines should be calculated to calculate the price of a full set of equipment, including crushing machines, dryers, roders, carbonized furnaces, conveyor:

1. The price of the pieces is relatively low. Generally, the crushing machines equipped with the charcoal machine are small pieces. Generally, it is about 56,000 yuan.Select the size of the raw material.

2. The rod machine is an indispensable core component of the charcoal machine, so it cannot be saved in this regard. The price of the rod machine ranges from more than two to 20,000.

3. The dryers equipped with small charcoal machines are generally air -flow dryers. The price is similar to the stick maker. When selecting, the machine should be selected according to the quality and price of the machine.

4. High efficiency of carbonization furnaces. The use of distilled carbonization method can collect wooden gas and wood scorched oil generated during the carbonization process and return to the furnace to reduce carbonization flue gas. Due to the high production cost of carbonized furnaces, the market quotation is compared to compare the market quotation.Chaos, from 20,000 to 100,000, the specific price should be determined according to performance and product quality.

5. The conveyor is a device that connects the machine to transport raw materials and finished charcoal. The rubber transportation or spiral transportation can be used. The price of the conveyor is generally not expensive. It is about 700 yuan per meter.

In summary, the price of the full set of charcoal equipment is about 50,000 to 80,000 yuan. If you buy a full set of equipment, you generally make a discount on the basic equipment quotation, which is cheaper than buying alone.

Can charcoal remove formaldehyde?

Decoration will inevitably leave formaldehyde. For the sake of human health, you need to remove formaldehyde before check -in. There are many commonly used formaldehyde methods. The physical adsorption method is one of them. charcoal is one of the commonly used adsorption tools.

The reason why charcoal can be used to remove formaldehyde is mainly because it has adsorption effects. charcoal has a large amount of micropores and transition holes, so that it not only has a high ratio of surface area, but it will be very good after the cavity is excluded from the exclusion of the holes.Adsorption performance can adsorb indoor formaldehyde to remove formaldehyde.

2. Is the effect of charcoal adsorption of formaldehyde?

charcoal can be used to adsorb formaldehyde, but its dehumination effect is relatively general:

1. Ordinary charcoal has a certain adsorption effect, but its adsorption ability is unstable, and it is vulnerable to changes in the environment. It may absorb other substances. When reaching saturationEssence

2. There is a product in charcoal that is activated carbon. Its formaldehyde removal effect is better than ordinary charcoal, but the adsorption capacity of activated carbon is less adsorbed. Generally, it will be fully absorbed, and if there is too little, it will not work.

In general, charcoal can adsorb formaldehyde, but in many methods of removing formaldehyde, the effect of removing formaldehyde in charcoal is not particularly good. removing formaldehyde can still be ventilated by opening windows.

Third, how long is the charcoal removing formaldehyde to change again

charcoal uses adsorption to remove formaldehyde. When charcoal is filled, it needs to be replaced, otherwise it will release the formaldehyde inside. How often do the charcoal removed formaldehyde?

Generally, the replacement time of charcoal is related to the formaldehyde concentration of the house. The formaldehyde volatilization will be more powerful. It is recommended to change it once a week. If you change it, you can place it under the sun and reuse it.Consider change every 3-6 months.

1. What are the raw materials for mechanical charcoal

Mechanism charcoal, aliasing mechanism charcoal, artificial charcoal, recycled charcoal, smoke -free cleaning charcoal, is a charcoal rod -shaped material squeezed by wood squeezing materials. Internationally, it is publicly regarded as green and environmentally friendly products.The density of mechanism charcoal is close to coal, which is more than three times that of ordinary charcoal, and smokeless when burning. It is mostly used for barbecue charcoal. Industry can also be used in the production of mi -molized charcoal and steel smelting or serving as boiler supplementary fuels.

The raw materials of the mechanism of charcoal have a wide range of raw materials, and the rice shells, peanuts, cotton shells, corn cores, corn stalks, sorghum stalks, bean stalks, sawdust, wood chips, granular shells, coconut shells, and coconut shells can be used to produce mechanism charcoal., Shave, bamboo dandruff, and rice shell are relatively good production materials.

2. How can the mechanical charcoal be ignited quickly

Mechanical charcoal ignition takes a certain time. If you master the correct method, you can shorten the time. The ignition method of the mechanism of charcoal is:

1. Flexible solid fuel block

Although liquid alcohol and gasoline fire quickly, it is not safe and the cost is relatively high, and the solid fuel block is much more convenient. Generally, it can be purchased from outdoor products, barbecue restaurants or sales of charcoal.You can buy online.By fire with solid fuel blocks, pay attention to ventilation. First, smash some small pieces of mechanism charcoal, and then find some small wooden sticks to put it into a shelf, put the mechanism charcoal, and wait for the wooden blocks to be flickered after the wooden block is completely burned.

2. Blind charcoal

The fire charcoal is specially used for fire, which is particularly easy to burn, but the disadvantage is that it is large, it is easy to stain the hand, and the price is not cheap, and the practicality is not very strong.

3. Wooden block fire

Just find some pine blocks and bamboo sticks, split into small pieces and stack it, leave a little gap, then lit the wooden blocks below, and put a few mechanism charcoal.It should be noted that artificial synthetic materials such as plywood should be used to avoid harm of chemical release.

4, point charcoal stove

It is specially used to give the mechanism for charcoal and round charcoal. The carbon method is to ignite the liquefied gas.

Reminder: Don't forget to prepare a bucket of water or fire extinguisher when igniting to avoid accidents.

Third, the mechanism of charcoal and fruit charcoal is better

1. fruit charcoal

fruit charcoal is the fuel that has been burned, distilled and other processes after the logging of the log, and the common fruit charcoal on the market has apple wood and litchi wood. The advantage is that it is easy to ignite.Taste, the taste of baked is particularly fragrant.

2. Mechanical charcoal

Mechanical charcoal is a charcoal made of charcoal machine. Because the carbon content of the mechanism is high, the density is large, and it belongs to waste use. Therefore, compared with the fruit charcoal, the mechanism charcoal is higher temperature, combustion -resistant, and environmental protection.The disadvantage is that the ignition point is high, it is difficult to ignite, and it is easy to fire.

In general, these two types of charcoal have their own advantages and disadvantages. When barbecue, you can choose according to the grilled ingredients: if you bake things are vegetables, you need to brush a lot of oil, then Maigoo Xiaobian recommends that you use fruit with fruit.charcoal, because the temperature of fruit charcoal is lower, the oil droplets are not easy to get angry; if it is baked, it is recommended to use mechanism charcoal, such as roasted whole sheep, because the mechanism of charcoal is high -temperature flame -resistant, and the efficiency is higher.

1. Overview of charcoal Barbecue oven

1. Turn on the fluffy charcoal barbecue, including carbon basin, insulation water basin, grill net, outer cylinder composition.Each component is made of stainless steel plate. The thickness of the plate smoke is 1.0mm smoking.

2. The drum -flung charcoal barbecue stoves include charcoal basin, heat insulation water basin, outer cylinder, cigarette cigarette ring, outlet out of the tobacco port, down the wind metal hose, baking tray.The components smoke down by the thickness of the thickness of the plate of the stainless steel plate.

3. The furnace of the bearing fust -carbon barbecue includes carbon basin, heat insulation water basin, 25W self -smoking fan, speed regulating electronic wind door, cage cigarette ring, outer cylinder.The outer cylinder is sprayed with cold electrostatic, and other accessories are made of stainless steel plate with a plate thickness of 1.2mm.The smoking method; the furnace comes with smoking device, uses oil and fire separation and forced body circulation, and forced secondary combustion technology, so that the oil fume produced during barbecue is basically effectively removed. ThereforeReduce investment costs.

Second, the characteristics of charcoal barbecue ovens

It is easy to operate and has many functions: baked skewers, fried meat, hot pot, or put on a flat desktop to eat Chinese food; not greasy, and the flavor of the grilled food is crispy and soft, soft and soft, soft, soft, soft, soft, soft, soft, soft, soft, soft, soft, soft, soft, soft, soft, soft, soft, soft, soft, soft, soft, soft, soft, and soft.The taste is delicious, the fan is controlled by a single table, and it is closed when it is not used, which greatly saves costs.

Third, charcoal Barbecue oven barbecue principle

The carbon is released in the process of burning. It is colorless and tasteless, and charcoal is burned, and there is no smoke in itself. Ordinary barbecue stoves have cigarettes when making products because the oil and seasoning are dropped to carbon fire when making products.

Fourth, how much is environmentally friendly bento -free charcoal Barbecue oven

If the indoor smoke -free Barbecue oven, how many skewers are baked in one time, The kind of automatic barbecue on the barbecue table10-17 Between string, the price is 300-800 between.charcoal smoke -free barbecue ovens are generally installed.

Disclaimer: The above method stems from the index of the program system or the sharing of netizens. It is for your reference only and does not represent the research perspective of this website. It proves that it is effective. Please pay attention to the authenticity and authority of the source of the content of the content.Apply to delete & gt; & gt; Correction & gt; & gt;

1. What is charcoal powder

charcoal powder, also known as charcoal powder, is produced by charcoal, such as charcoal residue as raw materials, the products obtained by crushing, and charcoal powder that can directly produce biomass can be produced.Bian Skin and so on.

What is the use of charcoal powder

There are many uses of charcoal powder, and the main application areas are:

1. Industrial field

(1) Metallurgy: Add charcoal powder during the smelting raw iron, which can help smelting high -quality steel with fine -grained structures, tight castings, and no cracks.

(2) Chemical industry: It is mainly used as a carburizing agent to carburize the steel products.

2. agricultural field

(1) Improve the ground temperature: After the charcoal powder is applied to the soil, because the black carbon particles absorb the Solar heat energy, the soil temperature can increase the degree of Celsius and promote the germination of the seeds.

(2) Improve the soil: After the charcoal powder is applied to the soil, the roots can be generated on the surface of the carbon, which can form agricultural soil suitable for plant cultivation. It has improved the growth, color, and taste of grains, Beans and vegetables.

(3) Keep soil moisture: When the relative humidity is more than 50%, the carbon powder can quickly absorb about 20%of water, which can be used to maintain soil moisture.

(4) Slow -release agent as pesticides or Fertilizers: Use the adsorption ability of charcoal powder to keep the content of pesticides and organic Fertilizers in a balanced state.

(5) Change soil pH: increase the soil CO2 content, adsorb the harmful metals in the soil, and increase the vitality of soil microorganisms.

3. The field of life

There are also many charcoal powder in the field of life. Common ones are activated carbon, charcoal carving, and water -tobacco charcoal. They are also widely used in the fields of fireworks and firecrackers and mosquito coils industry.

3. How much is charcoal powder per ton of one ton

charcoal powder is made of charcoal. The price is relatively cheaper. Generally, charcoal powder on the market is generally about 1800-2000 yuan per ton. There are also some expensive charcoal powder for more than 3,000 yuan per ton.(The above price source network is for reference only)