1. How to install the balcony anticorrosive wooden Flower stand

Although anticorrosive wood, anti -mildew, mildew, moisture -proof, insect -proof and other properties are prominent, and they have better durability.However, due to the special environment, if you pay attention to the correct installation method, it will greatly extend its service life.

1. Pay attention to leaving an extension joint when installing

When installing anticorrosive wooden Flower stand, the gap between 0.2 to 1cm of anticorrosive wooden Flower stand is generally determined by the water content of wood. When the water content of wood exceeds 30%, it should not exceed 0.8cm.The expansion of anticorrosive wood.In addition, anti -corrosion columns with a thickness of more than 50mm or more than 90mm can be opened on the back.

2. Select the hardware connection that is not easy to rust

The hardware is made of stainless steel, hot -dip galvanized or copper, which mainly avoids rust corrosion in the future and affects the connection fastness.Please drill in advance when connecting installation to avoid anti -corrosion wood cracking.

3. It is best to paint protective coatings after installation

The damaged part of the anticorrosive wood processing should be painted with preservatives and Outdoor protective coatings.Because the anticorrosive wood itself is a semi -finished product, the rough part can be reduced to less than 20%after the laying of the wood, and then the sand is light. If you want to have a better effect, you can also apply Outdoor protective coatings after cleaning the surface.

4. Pay attention to the protection of finished products

After painting the external protective coatings or oil -based coatings of anticorrosive wooden Flower stand, in order to achieve the best results, avoid people walking or heavy objects within 48 hours, so as not to destroy the protective membrane formed by the anti -anticorrosive wooden Flower rack surface layer.If you want to obtain a better anti -dirty effect, you can do two special Outdoor varnish treatment if necessary.

2. How to maintain the balcony anticorrosive wooden Flower stand

1. First of all, the anti -corruption wooden Flower stand should be laid in a suitable place. The unevenness of the terrain will affect its original structure. It can be solved by pads.

2. The Flower stand that receives rain outdoors will inevitably be continuously attacked, so it is regularly dried on the wood, so that the water that can enter the internal entry can be evaporated to avoid being destroyed in the internal structure.

3. Repair the damaged part, because if it is not repaired, it destroys the anticorrosive layer, then the rust and the internal damage of the metal accessories are possible.So a certain time must be corrected and checked.

4. Large -scale correction is necessary. It can be positioned once a year for paint or waxing.After a correction, the Flower stand is basically scrapped after waiting to be aging.

1. Advantages of carbonized wooden flower frames

In the villa courtyard and Outdoor garden landscape, the Flower stand is essential.The Flower stand is generally used for Outdoor, so the material must be wood -resistant and stable wood, and in my country's existing wood, Carbonized wood is the most suitable.The carbonized wooden Flower stand is generally composed of four parts: columns, top beams, beams and horizontal stalls.

The carbonized wooden Flower stand made of Carbonized wood, compared with other materials, has its own advantages:

1. The texture of the carbonized wooden Flower stand is clear and beautiful.This feature is more natural than other wooden flower stands, and all textures are naturally natural. Compared with iron steel flower stands, carbonized wooden flower stands are more integrated with nature.

2. The stability of the carbonized wooden Flower stand is strong, it is not easy to deform and crack, and the service life is long.

3. The corrosion resistance of carbonized wooden flower racks is stronger than other wooden flower stands.

two,carbonHow to choose a wooden Flower stand

1. Clarify the use environment of the Flower stand.If you use a carbonized wooden Flower stand indoors or in a non -open -air environment, you only need to choose ordinary surface Carbonized wood to meet the needs.If it is placed outdoors for a long time, long -term and underwritten sun exposure and rainwater, you need to choose deep carbonized wooden Flower stand. General surface Carbonized wood cannot meet the needs.

2. Carbonized wooden Flower frame color, texture selection.The choice of color and texture is mainly to consider the harmoniousness of the natural landscape of flower stands and flowers and plants, and it should not be too abrupt.

3. Health and environmental protection.When choosing a carbonized wooden Flower stand, carefully check whether it is environmentally friendly and whether it will produce harmful substances.

1. How much is the price of anticorrosive wooden Flower stand?

The price of anticorrosive wooden Flower stand is mainly based on the actual situation, and the selected materials are different and the price is different.Generally, camphor pine is mostly used in the market, but the effect of Citi pine Carbonized wood is the best, and the price will be more expensive, but it will not be outrageous.General reference price: 6000-8000 yuan/(All -inclusive, depending on what kind of materials you choose, this price is for reference only.) The length and width of the land area of the grape frame (Flower stand) are calculated by the unit price according to the grape frame (Flower stand).According to the cubic calculation, according to the actual size of all wood, the actual cubic number of a wood is calculated by the unit price.Generally, it is more accurate according to the cube, because it follows the size of the actual materials, so there will be no opaque situation.However, if the specifications you want to do are relatively small, the general quotation will be slightly more expensive. Considering the current transportation and labor costs, the smaller the area, the higher the cost.It is best to find a company to do it. Do not find guerrillas. The quality is more guaranteed. Even if there is a problem afterwards, you can get it in time. Do not take it cheap.

2. How to buy good anticorrosive wooden Flower stand

With the increase in the demand for anti -corrosion wood in the market, various anti -corrosion wood producers and dealers have emerged. Among them, there are many people who do not keep their reputation, quality, and profit.Therefore, if consumers do not polish their eyes, it is easy to buy inferior anticorrosive wood that does not meet the preservative performance and exceeds the standard.Therefore, you should take a look before buying, what you need to pay attention to when buying anticorrosive wood.

1. View the color of anticorrosive wood

From the appearance color, anticorrosive wood is generally green or blue -green, because CCA or ACQ wood preservative contains copper oxide.But color is not the main quality indicator of anticorrosive wood.Some illegal manufacturers should be pointed out that some illegal manufacturers use simple methods such as soaking, and even using simple methods such as paint.

2. View the quality of anticorrosive wood surface

Pay attention to the phenomenon of no scars, cracks, and deformation on the surface of the wood.The scars not only affect the beauty of wood, but also an important channel for eroding wood such as bacteria and insects.The phenomenon of cracks and deformation is mainly caused by poor drying treatment. Woods that have been treated with anticorrosive treatment are generally less than 18%, and it will not crack or deform in the air.

3. View the smoothness of anticorrosive wood

What is the effect of anticorrosive treatment? Intuize the surface smoothness of anti -corruption wood. The surface with poor pharmaceutical treatment has impurities such as powder, and the color is not uniform. It is best not to choose.

4. Follow the two product factors of anticorrosive wood

(1) Drugs of anticorrosive wood

When buying anticorrosive wood, you need to focus on the carrier of anticorrosive wood.Drugs are usually calculated based on the number of preservatives (pounds per cubic foot) per cubic meter of wood.Drugs affect the anticorrosive performance and environmental protection of anticorrosive wood, so you need to choose according to the use environment.Taking the CCA-C wood preservatives treated with anticorrosive wood as an example, if it is used for Outdoor but does not contact the ground, the anticorrosive wood should be greater than or equal to 4 kg/cubic meter;Or immersed in fresh water, the carrier of anticorrosive wood should be greater than or equal to 9.6 kg/cubic meter.

(2) The penetration of preservatives

The infiltration degree refers to the depth of the preservatives entering the wood.The greater the depth of infiltration, the more impossible to be damaged by the protected high -pressure treatment of wood.Taking the anticorrosive wood treated by CCA-C wood preservatives as an example, if it is used outdoors but does not contact the ground, the penetration depth of anticorrosive wood should be greater than or equal to 85%;The depth of wood penetration should be greater than or equal to 95%.

5. View product inspection certificate

Buy corruption wood must choose anticorrosive wood with a product inspection certificate.In addition, when choosing anticorrosive wood, it is best to go to the well -known large -scale Building Materials market to buy anticorrosive wood with certain brand recognition. Its products can make people feel more assured whether they are in the production process or preservatives used in preservatives.Essence