[bamboo and Teng Furniture Encyclopedia] bamboo and Teng Furniture Manufacturing Technology and FeaturesBuy rattan bamboo furniture purchase and maintenance

bamboo and vine furniture

bamboo and rattan furniture is one of the oldest furniture varieties in the world. The production is very sophisticated. It needs to be painted by light, light oil, and even paint color, making the finished product look firm and durable.

Characteristic

The first step is the selection of materials and feeding.Choosing bamboo is very particular. Zhu Ling cannot be used for a year or two. At least it must be more than three years, and it is best to be the bamboo in the middle of the bamboo garden.Skilled craftsmen enter the bamboo garden and only need to grab the bamboo with their hands to shake it, and they can judge Zhu Ling.Choose the right bamboo, and you need to put the material according to the type of product production according to the type of product making.

The second step is to split the cricket, which is about to process the bamboo as a filament or slices.Wash the bamboo first and grave the bamboo scars.The split is very particular about the skills.In the folk artists, there is a smoothness of "don't split high, one inch, one inch".The thin bamboo slices can be peeled up to dozens of layers in the hands of the craftsmen, using their mouth bite, hand pulling, and knife festival.However, weaving daily necessities generally only use three to four layers, and weaving crafts can be used for 6 to eight floors.Picking the pupa is to use the knife, hold the bamboo sheet with a bamboo slice, pull it back in the right hand, and process the filament or slices as wide as width.I picked it up, and then scraped it.The artist uses a scraper to scrape the silk or the slices smoothly, shave the thickness evenly, and can scrape out the round, flat, and .In order to prevent moth and mildew, it is also cooked.Put the split -to -chop in the pot and cook it. Remove it and dry it.

The third step is weaving.There are many weaving techniques for Jingjiang bamboo, and the content is very rich.Master of the Craftsman uses vertical latitude and weft, hexagonal six -way editor, triangular eye editor, tiger's eye editor, multilateral money eye editor, corner three -dimensional editing, rotation restoration editor, embellishment decorative editor and other compilations.Various patterns make you dazzling.During the weaving of crafts, bleach and dyeing are needed to be used for filament or slices.It can be drifted first and then edited, or then drifted first;Finally, dry and spray paint, and then the bamboo crafts are completed.

Pretty factor

bamboo and vine furniture is fresh and elegant, Smooth and natural, and with the fragrance of natural soil.So what are the factors of bamboo and vine utensils in the market?

Fresh and natural rustic atmosphere

bamboo is Smooth and delicate, with natural texture, giving people fresh and elegant, natural simple, and a faint native breath.Vine furniture is comfortable and natural, warm and quiet.bamboo and rattan furniture is durable, fresh and natural, and returning to the truth, bringing a new natural enjoyment to the home.

Environmentally friendly green

bamboo and rattan are natural materials. They have no pollution in green. The growth cycle is short, the output is high, and can be renewed, which does not affect the ecology.bamboo and vine furniture uses special adhesives during the processing process, which will not be harmful to them, which is conducive to the home environment.The abandoned materials generated during the processing process can be directly burned and used as an Organic fertilizer.

Novel styles are changing

bamboo and vines have strict structure, light quality, and flexibility.The vine material is soft when it is wet, tough when dry, and is very flexible. It can be arbitrarily bending and shaping the shape. bamboo and rattan furniture can individually produces Smooth lines and rich shapes.You can also use vine leather, Fujinxin, etc. to woven various types of patterns, and can also be used with other materials to make it more unique.When designing furniture styling, the designer draws the traditional style style and combines the principles of ergonomic engineering. It uses computer to design European, rural, Chinese and other multi -style furniture furniture to make people get greater satisfaction from the body and mind, fill the modernity and modern timesThe taste of fashion home people.

maintenance method

bamboo and vine furniture can adsorb a certain amount of water, but if you adsorb excessive water, it will become soft, the structure is loose, and the plane is drooping.Therefore, when bamboo and vine furniture is moist, be careful not to let its weaving shapes look sampled, so that after drying, it will shrink to its original size.

clean vine furniture is not troublesome, and you can cultivate your body slowly.Use a soft brush of the hair to remove the dust from the inside to the outside.If the stain is too heavy, it can be erased with a detergent. Vegetable oil and soap are the best cleaner for cleaning rattan furniture.Finally wipe it again.If it is a white vine chair, you need to apply a little vinegar to neutralize the detergent to prevent color degeneration.Dip the sulfur with a brush with a brush and brush the vine chair, and you can also remove the dirt.

If the bamboo vine furniture has been used for a long time, it is best to scrub it with salt water.

rattan furniture is most avoided next to the heating, and its adhesive part will be dry due to heating.,,Avoid direct sunlight to prevent the fading and drying of vine.Using some tools on hand, such as wicker and toothbrushes, or paint brushes, the hard hair of the paint brush can be cut into half into a small brush. The latter two are like a nail brush.Skill in the pen, and use them to eliminate dirt in vine furniture.

bamboo rattan furniture purchase skills

1. In addition to the fine compilation skills of the vine, the most important thing is to see if the rattan equipment is excellent.For example, wrinkles on the surface of the rattan material indicate that the furniture is processed with young rattan, which is poor and easy to break and corrodes.

2. You can grab the edge of the vine furniture with both hands, shake it gently, and feel whether the framework is solid, and wipe it on the surface of the furniture with your palms, and it should be Smooth.

3. See if the luster on the surface of the furniture is uniform, whether there are traces of spots, different colors and insects.

4. When using and storage, do not contact and close to the fire source and thermal source, and do not place it under the sun for a long time.

5. Wipe the vine furniture supplies with light food salt water, which can not only stain it, but also make it flexible for a long time.

6. The dust on the surface of the vine can be wiped with a soft wet wipe.The dust between the gaps is cleaned with a paint or a vacuum cleaner, and a cleaning agent or solvent with the surface of the vine furniture cannot be used.

Daily bamboo furniture Use maintenance

1. 1.New bamboo and rattan furniture should be processed first.Anti -insects, insecticidal use can be used0.5% ~3Soak the solution of the powder solution, spray it with commercially available mosquito and flies, sprinkle insects with boiling water, and expose insecticides in the sun.After processing, apply a layer of paint inside and outside the bamboo and rattan furniture, every separate2~3Apply again every year.

2.bamboo and vine furniture can use a soft brush to remove the dust from the inside out of the eyes when removing dust.If the stain is too heavy, you can use detergent to wipe it. Vegetable oil and soap are the best cleaner for cleaning vine furniture.bamboo and vine must be maintained regularly. If the use time is not cleaned for a long time, it will accumulate dirt. It is best to scrub it with salt water.

3..The back and cushions of rattan furniture are easily sunken after a long time.Therefore, it can be soaked in the depression area, and then in the sun((Be careful not to get too muchCureUntil the recovery and cooling, finally, apply it in the inside and outside of the recovery1~2Parly.

4. 4..When bamboo and vine furniture finds loose and cracking, it is necessary to immediately be tied and connected to make the falling parts restore in time.Apply a layer of paint at the repair point.

5.bamboo and vine furniture is most avoided next to the heating. Its adhesive parts will be dry due to heating. It should avoid direct sunlight to prevent the fading and drying of the vine material.It is easy to use some simple tools, such as wicker and toothbrushes, or paint brushes to remove dirt in rattan furniture.bamboo rattan furniture should also be cleaned often.For example, large bambooware such as cabinets, bookshelves, and lounge chairs usually pay attention to eliminate the dirt in the gap often, rinse and dry them with water.

[bamboo and Teng Furniture Craft] Basic structure of bamboo vine furniture manufacturing process

Basic structure of bamboo rattan furniture

1. frame structure

bamboo and vine furniture frameworks are not only used to reflect the appearance of the furniture, but also the main force components. Therefore, the reasonable or not of the frame structure directly affects the aesthetic function and use function of the furniture.The framework structure of bamboo and vine furniture has two categories: bending and co -combined with direct materials.

(1) Heating bending structure

Quick, time -saving, and labor -saving technology can not only maintain the natural beauty of bamboo and vine material, but also maintain the strength of the material. Therefore, this form of bamboo and vine furniture is particularly suitable for processing and production of bamboo and vine materials, but butIt is not suitable for bending of large -diameter bamboo and vine materials, and it is easy to burn the Skin of bamboo vine section, which affects the beauty.

(2) Open groove bending structure

This method is mostly used for the bending and horizontal frame of the legs and feet of the bamboo and rattan furniture framework.The processing process is relatively complicated, and to a certain extent affects the strength of the bamboo and vine frame, it is mostly suitable for the bending of large diameter bamboo vine materials.If the horizontal component is curved, pay attention to all the grooves in the interval position, and keep it on a longitudinal line.quality.

(3) Open a triangular groove bending structure

On the inner side of the bending part of the bamboo and vine section, the uniform saw the toothicular port of the canine, bend the bamboo vine section into the inside after the bending part of the fire, and then cool it.This method is also suitable for bending large diameter materials.It is also easy to damage the strength of the bamboo and vine section, complex processing, and high process requirements.

Second, plate -shaped structure

bamboo and rattan furniture combines a single, fragmented bamboo component into a larger area layer through a plate -like structure(( plate Cure Fully reveal the texture characteristics of bamboo and vine materials.This structure is important in function and decoration, so it must be carefully processed to meet the requirements of design and use.There are many types of board components, corresponding to a certain process method. The commonly used is bamboo strips, bamboo row boards, round bamboo and bamboo chips, mahjong blocks, editors, and plywood.

bamboo rattan furniture manufacturing process

The first step is the selection of materials and feeding.Choosing bamboo is very particular. Zhu Ling cannot be used for a year or two. At least it must be more than three years, and it is best to be the bamboo in the middle of the bamboo garden.Skilled craftsmen enter the bamboo garden and only need to grab the bamboo with their hands to shake it, and they can judge Zhu Ling.Choose the right bamboo, and you need to follow the types of the product.The basic algorithm of "one foot" is placed.

The second step is to split the cricket, which is about to process the bamboo as a filament or slices.Wash the bamboo first and grave the bamboo scars.The split is very particular about the skills.Spread among folk artists"Don't be tall, one inch of three knives".The thin bamboo slices can be peeled up to dozens of layers in the hands of the craftsmen, using their mouth bite, hand pulling, and knife festival.However, weaving daily necessities generally only use three to four layers, and weaving crafts can be used for 6 to eight floors.Picking the pupa is to use the knife, hold the bamboo sheet with a bamboo slice, pull it back in the right hand, and process the filament or slices as wide as width.I picked it up, and then scraped it.The artist uses a scraper to scrape the silk or the slices smoothly, shave the thickness evenly, and can scrape out the round, flat, and .In order to prevent moth and mildew, it is also cooked.Put the split -to -chop in the pot and cook it. Remove it and dry it.

The third step is weaving.There are many weaving techniques for Jingjiang bamboo, and the content is very rich.Master of the Craftsman uses vertical latitude and weft, hexagonal six -party editor, triangular eye editor, tiger's eye editor, multilateral money eye editor, corner three -dimensional editor, rotary restoration editor, embellishment decoration Editing and other various compilations, the long bamboo silk instantly forms a variety of patterns, making you dazzling.During the weaving of crafts, bleach and dyeing are needed to be used for filament or slices.It can be drifted first and then edited, or then drifted first;Finally, dry and spray paint, and then the bamboo crafts are completed.