1. How to install the bathroom Hanging cabinet

1. Select the installation location

The bathroom cabinets are sink, so it is generally installed on the side wall of the bathroom door. Of course, when choosing a installation location, you must also choose the Hanging wall to ensure that the Hanging wall is solid. If it is a hollow wall or wall,If the body is too thin, it is not suitable to install a Hanging bathroom cabinet, otherwise the wall will be dropped and destroyed for too long after installation.

2. assembly cabinet

The assembly cabinet is very simple. Only the three -in -one screw is installed on the corresponding board and assembled the pairing plate. Then the screw is locked with a fixed screw, and the entire bathroom cabinet is installed.

3. Determine the installation height to follow up the location of the water inlet

The installation height of the cabinet and the ground is generally about 80cm ~ 85cm, and then determine the fixed holes behind the cabinet. Use the marking pen to mark it. Before the drilling is installed, the two people will hold the cabinet to compare the faucet water inlet (that is, there is no, there is no noIt is blocked by the plate), if you block it, you can use an electric drill.

4. Hanging installation cabinet

Then use the impact drill (the best rhinestone, especially the wall that has been installed with tiles) on the marked position wall surface, put the expansion Tube in the wall accessories into the hole, and then use a self -attack screw to use the self -attack screwLock with the wall.

5. Install the basin

The packet installation includes the faucet installation and the underwater pipe installation of the water washing basin. Installing the basin should use the horizontal instrument to ensure that the cabinet's level is not large, and it is necessary to distinguish the horizontal placement of the basin.

6. Install makeup mirror

Put the specifications of the back hole of the makeup mirror on the wall, install the expansion Tube, and then screw the screw into the expansion Tube to the appropriate depth, and hang the bath mirror.

2. precautions for installation of suspension bathroom cabinets

1. Please do not move and unload at will once you install it, let alone hit the mirror surface with objects to avoid breaking the injury.

2. The floor -to -ceiling bathroom mirror can be moved, but it needs to be completed by multiple people, and the angle of the placement is the same as before moving. Do not let the children get closer or push the floor mirror alone.

3. If other bathroom accessories are found to be loose, please adjust or repairs in time to avoid accidents caused by falling off.

Third, the maintenance of the Hanging bathroom counter

In order to extend the service life of the table, do not place high -temperature objects directly on the table.When placing high -temperature objects, other thermal insulation materials such as brackets and heat insulation pads with rubber feet should be added under placing objects.

The front light of the mirror is the lamp on the dressing mirror, and the light on the bathroom mirror. Generally, it refers to the lighting fixed on the mirror. The role is to clear the mirror, making it easier for people to look at themselves to see themselves.

Because the mirrors of the bathroom cabinet are installed on the wall, the Lights in our room are installed in the middle of the roof.So when we look in the mirror, our back is facing the light, and our face will look very dim, the color is unknown, which has a great impact on our facial cleanser.With the front light of the mirror, our face will be very clear, so when installing the bathroom mirror, you should install the front light of the mirror.

1. How to install the front Lights of the bathroom cabinet mirror?

The installation height of the front lamp

When decorating a house, you should first consider the approximate location of the bathroom cabinet and mirror, so that we can be sure of the approximate position we reserved, so what is the height?Under normal circumstances, if you install the bathroom cabinet, then the mirrors are on the bathroom cabinet, so the highest position of the mirror is between 1.7 meters and 1.8 meters.Do not exceed 1.8 meters when the front light line.People often put the reserved line at 2 meters. The mirror cannot be closed, which will affect the overall beauty of our room.

precautions for installation of bathroom cabinet mirror

1. Observe that the aluminum part of the front light Tube of the bathroom cabinet mirror has a label one end and defaults to the positive extreme. If the lamp Tube is installed, the power is not bright. Please change the ends of the T5 lamp Tube.If you still do not lighten up, please return.

2. Be sure to distinguish the input and output end of the front light of the bathroom cabinet mirror.

3. bathroom cabinet mirror front lights should pay attention to the waterproof and riot effects when installation. Under the conditions of high temperature and humidity, it should still maintain a high usage rate. At the same timeThe noodle wash basin or toilet should be carefully checked at the same time.

4. When the output line of the welded power supply, you must clear the input cable and the input cable of the switch on both ends of the front lamp rack at the front lamp rack of the bathroom cabinet.

5. Do not use the power to install the front Lights of the bathroom cabinet mirror.

Second, which is the best front light

Depending on the installation location, it can be divided into; the front light of the handwashing, the front light of the bathroom mirror, the front light of the bathroom mirror, etc.

Pay attention to the consistent style in the selection of the front Lights of the mirror.The color, shape, and style of the front lamp must be commensurate with the style of indoor decoration and furniture and echo each other.Selecting the front light of the mirror mainly depends on its light effect, that is, the effect of light reflection after lighting.The front Lights of the mirror should be integrated with the overall style of the bathroom, either quaint, or new rhyme, nostalgic, or avant -garde, or romantic romance, which can be reflected through light and shadow to enjoy the beauty of the Lights.

The color matching of the front lamp

For the lighting of the front of the dressing mirror, the color can be matched according to the style of the bedroom, which is more likely.The front lamp used in the bathroom is generally used with anti -fog mirror front lights.Then the light of the front light of the anti -fog mirror is mostly white or yellow.White belongs to the versatile color. It is most classic with black. It can also be paired with other colors to create different fashion color space.Yellow and elegant, with other bathroom products with the same color system, such as brown bathroom cabinets, pale yellow marble table pots, etc., create an elegant bathroom space.

The space of the front light of the mirror

In addition to its basic local lighting functions and safe use functions, it can also give the entire room's furniture color, matching, and structure matching to play a finishing touch.Either quaint, or new rhyme, nostalgia, avant -garde, rural style, or urban romance.Then each Mirror front light, whether the light is turned off or bright, is a artwork.

Third, the cleaning of the front lamp

1. It is best not to clean it with water. Just wipe it with a dry cloth. If you accidentally touch the water, dry it as much as possible. Do not wipe it with a wet wipe with a wet cloth immediately after the light is turned on.

2. In terms of cleaning, the lampshade of the cloth cannot be flushed. It can be used in a dry cleaner. If it is made of glass, it can be washed with water. Just wipe the skeleton of the lamp.

3. cleaning the front light of the mirror with vinegar is a good way.Pour the amount of the beer bottle cap in the half pot of water. After mixing it, soak the rag in the vinegar water, and the rag that is twisted to wipe the dust on the lamp.Because vinegar has the effect of cleaning and preventing static electricity, the lamps wiped with vinegar are not only bright but not easy to dip the dust.

4. When cleaning the light body, wipe it gently with a soft dry cotton cloth. The movement should be kept from top to bottom. Do not rub it back and forth.When cleaning the lampshade, it is advisable to use clean chicken feathers to prevent the lamp cover or deformation.