[kitchen Multifunctional Set] What are the classified kitchen racks in the kitchen?

What are the categories of the kitchen multifunctional shelf?

The kitchen multifunctional shelf is divided into two types, one is wall -mounted, and wall -Hanging multi -functional racks are hung on the kitchen wall, which can save our space more.You only need to put it simply to complete our goal of storage.This mode must be careful to dry it when we put the tableware. If our tableware is still wet, it will cause our kitchen utensils to rust or cause our area to water.

There is also a flat type. This type of kitchen utensils are still casual.Where is the right place, it can be placed and where it is very convenient, and it does not need to be installed. It is loved by many consumers.In the process of using this type of multifunctional stand, be sure to wipe it a few times to make it cleans a few times.

How to buy the kitchen multifunctional shelf

1. Look at the material

Whether the material of the rack can not rot or deformed rust in a humid environment. Carbon steel is cheaper than stainless steel, but it is usually higher than stainless steel, but it will rust.The anticorrosive performance of stainless steel is better, the surface is Smooth, the use time is long, but the strength of stainless steel is low, and the price is expensive.

2. watch net film

Nets pay more attention to the bearing gravity. Generally, each floor of the kitchen can bear 30-50kg each floor, but the standards of various manufacturers are different.High -quality mesh can see the precise welding process, the mesh pattern is more dense, it is not easy to be bent, and more items can be placed.The inferior mesh has no way to meet the requirements of the load. The density is large and can only put some small items.

3. Look at the connection

The connection of the Kitchen rack can adjust the layer height of the mesh. The unique design can be freely moved at any time, and the ordinary shelf fixed structure design cannot be adjusted, and more items cannot be placed.

4. Look at the wall

High -quality kitchen -stitched rack Tube walls are generally more than 0.8mm, and it is not easy to deform, and the load is also guaranteed.The inferior Tube wall is only about 0.4mm. If it exceeds the maximum load, it is easy to bend and deform.

5. Look at non -slip glue pads

It is best to have anti -slip glue pads in the Kitchen rack, and it can be adjusted according to the ground to facilitate the use of uneven ground. It uses good material for rubber, which is more abrasion -resistant and non -slip to make the kitchen shelves more firm.

[bathroom glass Set Film] How to clean the glass shelf in the bathroom glass?

Is the bathroom glass stand?

The bathroom is a place where it is often dealt with with water. The environment is relatively humid. The bathroom racks should be in a humid environment for a long time. Therefore, when choosing the material of the rackMaterial.Because the bathroom is much greater than other space humidity, if it is a metal material, it is easy to rust, and the rusty shelf is indeed very sad to use.The glass rack is a good choice.

General glass racks are made of tempered glass.Not only is styling and simple, but also easy to clean, but be careful to avoid strong impact on the glass surface.glass setting the rack is precise workmanship, complete quality.Metal electroplating, consolidating durable, not easy to rust, strong bearing capacity.The transparent and bright, highlighting the fashionable beauty.The glass shelf uses high -quality metal plating. The design is well -behaved, cumbersome, clean and beautiful, can promote air circulation, reduce dust accumulation, and open design, making the storage at a glance.

The glass shelf has a variety of functions in one body. It can be used not only in the bathroom, but also can be used as a kitchen shelf/fruit stand/vegetable frame.Its advantage.

How to clean the glass rack

1. Wipe the rack with water and dry it with a soft cotton cloth. Do not use any grinding cleaning agent, cloth or paper towels, and any acidic cleaning agent, brighter abrasive or cleaner or soap, wipe the surface of the rack surface on the surface of the rack surfaceEssence

2. Because the long -term residues of chromium -plated surfaces such as various kinds of wash and shower gels are usually used to degenerate the surface of the shelf and directly affect the surface quality.Please clean the surface of the rack once at least once a week, and it is best to use a neutral cleaner.

3. For the difficulty of removing dirt, surface dirt film and stains, please use mild liquid cleaner, colorless glass cleaning solution or polish liquid without wear, and then use water to clean the rack and use it with waterSoft cotton wipe dry.

4. You can use cotton wet cloth with toothpaste and soap, wipe it gently, and then wash it with water.

5. You can use wax oil with strong decontamination capacity and apply it on a clean white cotton cloth to completely clean the entire product. The cycle is generally 3 months, which can extend the life of the rack.Remember that every time you clean, you must dry the water stains, otherwise water stain dirt may appear on the surface of the pendant.

[Filem Stocks installation] What are the precautions for the installation of shelves for the installation of the shelves of the shelf?

What is the installation step of the shelf?

1. Preparation Tool

What are the installation steps for shelves now?Xiaobian first introduced the installation steps of the shelf storage shelf is a preparation Tool to allow everyone to face the problem calmly.So, do you know what the tools you need to prepare in this shelves are prepared in the installation steps?During the installation of the shelf, there are very few types of tools that need to be used, but one or two of them are not tools that ordinary families will use.In the installation steps of the shelf, the tools you need to prepare are wrenches, pliers, and electric diamonds.

2. Planning

The installation steps of the shelf are planned, which is one of the very important steps.There are many places for the installation of the shelves. You can operate the specific requirements of your home, such as installing it in the kitchen. Then, everyone must pay attention to its height and distance from the distance from them.It will increase your troubles in the process of cooking.During the installation of the shelf, everyone should pay attention to the size planned on the wall, and punch a punching according to the specific parts of the product. It is best to use things to mark it.

3. Observe the wall

What are the installation steps for shelves now?Xiaobian will introduce the installation steps of the shelf in the shelf is to observe the wall.Everyone may ask, what is the relationship between this wall and shelves installation?Everyone knows that in some people's homes, in their own decoration, the entire space may be planned again, and some hollow walls will be used. Such walls, the nailing power is very bad, so that their plants can not be placed.Therefore, everyone must check their walls during the installation process and install the shelf to install it on the solid wall.

4. Specific operation

The next shelf is installed to put your own products, one time, according to the relevant drawings, punching on the planned wall, and then fixing it with a nail.If everyone still wants to install the shelf to install the side of the hollow wall, everyone should first add the hollow of this wall to make it more nail, and then install it according to the relevant product drawings.Finally, the installation steps for the shelves that everyone needed to fix their products and fall from the air.

5. Summary

What are the installation steps for shelves now?Steps for the installation of the shelf, I will introduce it here. I believe that everyone can learn a lot of this step through this information and information.In fact, the installation of the shelf is still very simple. As long as everyone can be careful, then you can install any places you want to install in your home.If you still have questions about the installation steps of the shelves, it doesn't matter. As long as you can always focus on this website, you can know it very detailed.

precautions for the installation of shelves

1. Check out its model carefully before installing. It is better to check its size and overall number. Finally, check whether the surface is damaged. If so, you can apply for replacement.

2. The use of shelves is relatively flexible. It is clearly determined to be installed. If the indoor space is relatively large, you can be a bookshelf. If the indoor space is small, you can place some cosmetics or gadgets.

3. Pay attention to the problem of the material and installation of the shelves. The load -bearing capacity of the shelf is limited, and the overweight items cannot be placed. During the construction, the embedded parts should be made in advance according to use.

Rack classification

Divided by material:

1. glass setting rack

Features: It is generally made of tempered glass. It is stylish and easy to clean, but it is necessary to avoid strong collisions.

Cost -effective: high

2. Plastic shelf

Features: It has the characteristics of resistance to corrosion, anti -aging, rustless, non -toxic, odorlessness, high pressure resistance, light weight, and simple construction.

Matching: Usually, it is mainly practical, and the appearance is usually poor.

Cost -effective: low

3. Stainless steel shelf

Features: no corrosion, erosion, rust or wear.Because stainless steel has good corrosion resistance, it can keep the structural components permanently maintain the integrity of engineering design Essence

Matching: Generally, you choose a wall -hung shelf, which can make good use of space and increase the metal sense of the kitchen.

Cost -effective: medium

4. Alloy setting rack

Features: A substances with metal characteristics consisting of two or more metals or non -metals, such as space aluminum shelf.

Matching: With the same color cabinets, it will have better decorative effects.

Cost -effective: medium and high

5. The barrier shelf

Features: The rack combined by the PPR pipe can be freely matched with combinations, hollowed out in the middle, putting on the partition, the color of the partition is green, orange, blue, black and other choices, beautiful and fashionable.

Matching: The appearance is very beautiful, and the assembly is very simple. DIY is autonomous.

Cost -effective: medium and high

Divided by style:

1. Flooring rack: refers to the shelf placed on the ground, mostly placed in the corner.Don't look at the wall, but the cabinet is vulnerable to moisture, and the hygiene below is not easy to clean.

2, adsorption rack: refers to the shelf adsorbed on the wall and does not contact the ground.It is convenient to take care of it, but the requirements for the wall are high, and it must be installed on the load -bearing wall. It is best to be a physical brick wall.

cleaning of the rack

1. Wipe the rack with water and dry it with a soft cotton cloth. Do not use any grinding cleaner, cloth or paper towels, and any acidic cleaning agent, bright abrasive or clearing Wipe the surface of the shelf in a sanapa or soap.

2. Because the long -term residues of chromium -plated surfaces such as various kinds of wash and shower gels are usually used to degenerate the surface of the shelf and directly affect the surface quality.Please use soft cloth at least a week clean the surface of the rack once, and it is best to use a neutral cleaner.

3. For stubbornness, surface dirt and stains that are difficult to remove, please use mild liquid cleaner, colorless glass cleaning solution, or cleaning liquid without wear. Then clean the rack with water and dry it with a soft cotton cloth.

4. You can use cotton wet cloth with toothpaste and soap, wipe it gently, and then wash it with water.

5 You can use wax oil with strong decontamination capacity, apply it on a clean white cotton cloth, and clean the entire product thoroughly. The cycle is generally 3 months. This can extend the life of the shelf life.Remember that every time you clean, you must wipe the water stains, otherwise water stain dirt may appear on the surface of the pendant.

maintenance of the rack

1. Develop the habit of opening windows and windows frequently. This will not only keep the air in the bathroom Smooth, but also help the family's health, absorb more fresh air.

2. The surface of the rack should be often wiped with soft whole cotton cloth and water to ensure bright luster. You must not use corrosive acid -alkali solutions. Try not to use detergent. clean.

3. Usually if we want to decorate, do not let the paint on the shelf, because the paint has a great corrosion effect on the plating on the surface of the rack.