1. The breeding method of Xitanghua

1. Soil

The soil requirements are not strict. As long as the texture is loose, nutritious, drainage, breathable, pH value is even better.Be careful not to use alkaline soil.

2. Breeding

The large -scale cultivation method of the nursery can be sowed, and the heavy -petal varieties can be divided into or cuttings.Cuttings should be cut with hard branches in early April, and cuttings can also be cut in the rainy season in July-August. Cut the green branches and insert it into bed.Pot.

3. Light

is a environment with sufficient light. If the growth environment is too shade, it is easy to lead to poor growth in the growth of Xi Tanghua, and the branches and flowers will become thinner and small.

4, temperature

Xi Tanghua prefers a warm environment, but in the summer, the light is very strong and the temperature is very high, so you must find a way to cover it, otherwise it can easily lead to burning the leaves of Xitanghua, generally 18-25 degrees Celsius.In the middle is the most suitable for the growth of Xi Tang.

5. Water

There is no too much demand for water, and there is no need to water.Guarantee the soil in the potDon't dry.However, the temperature in summer is high and the amount of evaporation is large, which can increase the amount of watering appropriately to prevent too dry.

Second, the main points of maintenance of

1. Watering does not require too much water, and there is no need to water.Make sure that the pot is not dry.However, the temperature in summer is high and the amount of evaporation is large, which can increase the amount of watering appropriately to prevent too dry.

2. Fertilize the seasons and growth status, and apply thin liquid Fertilizer in the afternoon.Once the Fertilizer is too much, it is necessary to pour some water to dilute, so that the Fertilizer is discharged with flowing water.

3. Pruning the Tattoo branches is dense. Every 2-3 years of dormancy, 3-4 years of old branches should be removed and new branches are promoted.The residual flower branches after the flower should be cut off in time. After the winter, the disability, the diseased and insect branches, and the weak branches should be cut in time to ensure that the position of the plant is well -proportioned and beautiful.

4. The time for changing the pot to the pot is generally changed to the basin, it is best to be in spring or autumn.If you grow faster, you can change it once a year. If it is relatively cold, you can change it every three years.

Third, the problem that Ji Tanghua may have

1. Disease

The main occurrence of "yellow leaf disease".It will cause tender leaves to become yellow, and the entire leaves will eventually fall.Sulfuric acid iron sulfur solution can be poured, three to four consecutive times.In addition, you can also supplement some other Fertilizers.There are also "brown spot disease", from July to September, it can be cleaned with bacteria.

2. insect pest

There are fewer pests. Occasionally, the harm of "red spiders" and "scripts" can be sprayed.

Method of succulent plant seeds

Succulent plants refer to a type of plant that appears thick and juicy in appearance; there are more than 10,000 Succulent plants in the world, and they belong to more than 100 families in plant classification.

It is not difficult to plant methods, but it cannot be ignored, and it is not necessary to plant it blindly. Before planting, you can go online to see Baidu experience. Let s share with you with my planting experience:

1Prepare a variety of meat plants for the Flower pots, first pour the soil water through the water:

If you do nt buy a dedicated soil, it is also good to match the soil by yourself (but if you want to disinfect the soil, you can use a disinfection agent to prevent plant rotting)!

It is best to use the soft peat soil (with a certain water reservation ability), because the peat soil is soft, which is very conducive to rooting;

As far as I know, the more reasonable soil method is: peat soil60%sand20%Granules20%If you can't find the river sand, you can also replace it with particles; the particles can be pottery grains, stones, etc.

2Sprinkle the seeds evenly on the surface of the soilThe

If the soil is soft, the seed surface does not need to be sprinkled on the soil. On the contrary, it is also possible to sprinkle a thin layer of soil, but it is also possible to sprinkle too much so that the seeds are not buried too deep and will not germinate!

Also note: Use the bottom of the Flower pot with a hole in the bottom!

3Follow the plastic wrap1-2Zhou, put in20Available indoor ventilation!

If the local temperature is20Around , soil is sprinkled on the surface of the seeds, but no need to protect the plastic wrap and keep the soil soft and humid (watering for a week2-3There is no regulation in the second time, just keep the soil wet)!

If the temperature is cold, be sure to put on a plastic wrap (if possible, it is best to open it at noon. This cultivated plant is full and bright in body.)!

4,wait1-2Zhou can see the super cute bud:

At this time, the plastic wrap can be lifted off, and the appropriate amount can be kept light. The succulent people like the sun very much. There is a certain amount of light.Many novices have Succulent plants because they are too frequent.

Summarize:

Three points are inseparable from breeding plants: moisture, medium, and light.The succulent is no exception.Light is an important factor that affects the growth of plant growth, but moisture and medium are the factors that directly affect the life and death of Succulent plants.If you also have a breeding or intended to cultivate succulent, let's learn the meat together.

How long does the succulent plant seeds germinate?

1Scenic: Jingtian is actually germinated, not very slow, the temperature and water are suitable.3 ~ 7The sky is almost the same. If you dont post it, it is recommended to have a difference. Be careful not to freeze the freezing.~There are individual varieties to be slower, especially the seeds collected at home, and the germination is slow.Jingtian Miao is also the easiest to be apprentice. It needs to be controlled. For lazy people, I personally think that it can be started from the soil. Do not use too much water.~For example, I used pure vermiculite for the first time.In addition, open the cover in time.

2, Raw stone flowers:PPIt is relatively easy to germinate. The seedlings are not easy to raise, but I personally feel that the seeds collected at home are slower, but it seems that the growth is good after germination. It may be related to mixed.~ ppWhen I was young, I was afraid of dryness and wetness. I was afraid of wetness. Pay more attention to controlling water. In addition, do nt dry it. The scenery feels like it. Of course, it must be moderate.PPIt is not easy to move the seedlings and it is not easy to live, so it is recommended to match the soil at the beginning. The pot is selected.PPIt is very small and not fast, so it can be moved for a long and long time, so it is recommended to on -demand and use toothpick.After the small seedlings are much taller, you can sprinkle some deer marsh on the face and fix it.Silver needle: I dont have too much Tube, which is relatively skinny, I feel that Xiao Miao is afraid of big water~The germination is also fast, surpassing Jingtianwa~It is easy to turn it when the water is big.

3Fanxing: This is also easy to live, and there is nothing special about it. I also need to move less seedlings. I have shifted the seedlings because of the first all -vermary stone. A large number of seedlings have been moved.Move again, resulting in a reduction in survival rate.

4Talking about the genus Wawei, this experience is not a lot of experience. There are ten thousand elephants sowned.7A jade fan brocade,7A jade fan, the seed is expensive!IntersectionThe first broadcast4Try a Vientiane, come out3The problem is that the soil is covered. In fact, I don't think I need to cover the soil. Later, I did not cover the soil. I was very relieved.The main reason is to be stuffy. I personally think that the water is sufficient.2point,1I'm afraid of light,2The seeds need enough water.I did not cover the soil later, and the lid was stuffed.This genus is slow,7 ~20sky.

Potted flowers Six methods

1. The residual tea is used to pour the flowers, which can keep the soil water and add nitrogen and other nutrients to the plants.However, the humidity of the flower basin should be poured in a regular basis without pouring it with the dumping tea.

2. After the deterioration milk is poured with milk, add water to pour the flowers, which is beneficial to the growth of flowers.But more water is used to make it easier to dilute.Unblocked milk should not be poured flowers, because it generates a lot of calories during fermentation, it will "burn" the root (rotten roots).

3. Pour the flowers with cold water and pour the flowers with cold water, which can make flowers and trees flowing flowers and flowers, and can promote early flowering.If it is used to pour the bamboo, it can make its branches and leaves develop horizontally, and the dwarf is dense.

4. Pour the flowers in warm water in winter and cold water. It is advisable to pour flowers with warm water.It is best to place the water in the room, and then pour it when it is similar to the temperature of the room.It is better if the water temperature can be poured when the water temperature is 35 C.

5. Put the flowers in rice water often use rice water to pour rice orlan and other flowers, which can make their branches lush and bright.

6. When there is no one in the family, people who love flowers and flowers and flowers are not at home for ten days and a half months for visiting relatives or going out. No one is poured.At this time, a plastic bag can be filled with water, pierced a small hole with a needle on the bottom of the bag, placed in a Flower pot, and the small holes are stuck to the soil, and the water will slowly leak out the wet soil.The size of the hole should be mastered so as to avoid water leakage too fast.Or put a ware full of cold water next to the Flower pot, find a wide cloth strip with better water absorption, put one end in the water water, and the other end into the Flower pot soil.Wet, the flowers do not die.

Five methods for fertilizing Potted flowers

1. Sprinkle a layer of Wheat rice granules in the Flower pot, which can promote the growth of flowers and extend the flowering period.

2. Burning eggshell Fertilizer is crushed into the Flower pot. It is a good Fertilizer, which can make the pots grow lush and the leaves are gorgeous.

3. Cooked a small amount of soybeans to be used.Wear three points for each pot of flowers and put 3-5 cooked soybeans, depth and 2-3 cm, without hurting the root of the flower, and covering the soil as usual.

4. Broke the pork bones, fish bones, etc. prepared for abandoned, and apply the bottom or basin surface of the pot.

5. Pour flowers with rice washing water.Trace elements such as nitrogen, phosphorus, and potassium in rice washing are mild Fertilizers and mild Fertilizers. It does not hurt the root of the flower.

How to prevent and control the Potted flowers

Termites and ants are very harmful to pot flowers. It is not only dry, but also destroys the root system of the plants, causing the plant to weaken the ability to absorb and transmit the plant in nutrition, water, and eventually leads to the poor potential, withered and even death of the plant.Now introduce several methods for preventing ant -harm.

Eliminate

Pen flower should be far away from the ant hole.If you find that there are ants in the pot soil, first follow the ant's crawling route to find the ant nest, and use water flooding, fire burning, spraying drugs and other methods to eliminate it.Sprinkle some lime on the crawling route of ant nests and ants to prevent the ant from harm again.

Physical control

1. When applying rotten Fertilizer to apply base Fertilizer or Organic fertilizer, it is necessary to use the Organic fertilizer that is fully fermented and rotten. Do not use raw or semi -cooked Fertilizer to avoid causing ants for ants.

2. Washing the excreta of insects such as flies, moths, aphids, mites and other insects on the leaves of the leaf surface can easily seduce ants to find food. Therefore, it is necessary to spray the leaves with water to keep it clean.At the same time, clean the ground and keep the pots of Potted flowers clean and hygienic, so as not to attract ants with odor.

3. Put the potted pots that are harmed by ants, and slowly put them in a barrel with water (the water can be flooded through the pot soil) for 30 to 60 minutes.The ants can't stand the flooding of the water, and they will crawl out of the pot soil. At this time, the ants that float on the water and crawl on the pot of the pot of the pot can be removed.

4. The garlic is peeled with garlic and smashed. These debris are buried into the pot soil.

5. The most effective way to remove the pots that have built nests at the root is to turn the pot in the pool and destroy all the ants.Then clean the roots of the plant and plant pot flowers with new pots of sterilization.

Chemical prevention

1. Before the potting of potting soil, before the upper or over the basin, the pot soil is disinfected with 40%Forma, 65%Daisen zinc powder, and 50%multi -bacterial pink powder, etc., killing the termite in the pot soil, and the termites in the pot soilAnt and its eggs.

2. Burted the soil with 50%of the enemy's wettable powder and the fine soil with 50 sieves and mix well to make the medicine soil, and then bury the medicine soil into the pot soil to eliminate the ants.

3. Plutiny solution should not be turned over the basin, the effect of buried soil is not obvious and severely damaged, or the ants that have built nests in the pot soil.Under 1000 grams, or mix 40%of the pistachio emulsion with 1000 grams of water, 5 to 10 grams of pyramids, pour the medicinal solution into the pot soil and ants, and then seal the entire Flower pot with a plastic bag for 12 hours.Kill all the ants.

The breeding method and precautions of rich coconuts

1. Soil

Four wealthy coconuts should choose loose and fertile, fertile, drainable, and breathable sandy soil. Choose a larger Flower pot, because the roots of the plants are relatively developed.A small amount of nutrient solution is applied to the soil, which can promote the growth and development of plants, and the plant growth is stronger.

2. Temperature

Rich coconuts like to grow in a warm environment, moist, and grow strong in the semi -shade environment.The best growth is between 15 and 25 C, and the maximum cannot exceed 32 C, otherwise the leaves will wither.In winter, we must pay attention to the temperature in the room must be above zero degrees, otherwise the rich coconut will be frostbite or even frozen to death.

3. Watering

To ensure sufficient water supply during the strong growth season of wealthy coconuts, it should be watered once in about 1-3 days to see the pot soil. If the pot soil is too dry, it should be watered immediately.Wet, you can wait for watering. Too much watering can easily cause water to fail to evaporate normally and cause the plant rotten roots.

4. Light

The growth of rich coconuts requires appropriate light, which can promote its leaves more shiny and weaker. The leaves in the shelter environment for a long time are easy to yellow, and the branches are easy to soften.Choose a Shading net or move it to the midnight environment for maintenance.

5. Fertilization

Fugui coconuts have less demand for Fertilizer. You only need to apply liquid Fertilizer 1 to 2 times a month during the growth period. In the end of autumn and winter, you should apply less Fertilizer or not fertilize.The thick Fertilizer should be performed in a small amount of many times, otherwise the branches and leaves of the rich coconut will be burned.

6. Pruning

The growth of rich coconuts is very strong, so in order to allow the wealthy coconut to get more nutrition every branch and leaves, when weeding during the growth period, all the dead branches and sick branches on the branches are cut off.Tool, cut the cuttings for cuttings.

7. Pests and insect pests

Garcus pests are natural enemies of rich coconuts. The diseased spots of rich coconut leaves not only affect the beauty, but also easily cause the wealthy coconut to wither. ThereforeSpray.

8. Change pot

The adaptability of a wealthy coconut is average. It is easy to affect the growth of the root system for a long time without changing pots. It is best to change the pots every two years. When changing the pot, you need to trim the roots.It should be kept slightly dry.

A breeding method of shrimp ridge

1. Soil

Choose good drainage, loose, certain moisturizing, and rich humusearthFor soil, it can be used with humus soil or carbon soil to add an appropriate amount of river sand. It can also be mixed with ordinary garden soil and humus soil.

2. Watering

Shrimp Ridge likes a high -humidity environment. If it is placed indoors, it is not suitable for frequent watering and keeping the soil moist, but water cannot be accumulated.When the shrimp spine blooms from March to May, it is necessary to keep the soil slightly dry. It can be poured in the morning and evening from July to September.

3. Temperature

Shrimp orchids like a warm environment, so in winter, pay attention to the temperature must be maintained above 0 degrees, otherwise there will be a risk of freezing to death.

4. Light

Shrimp orchid likes the sun with sufficient sunshine. In spring, summer, and autumn, it is best to put the shrimp ridge in a Shading place, or put the shrimp orchid into a 50%Shading shadow.In winter, because the light is not so strong, it does not need to shade in the room.

5. Fertilization

Fertilize once a month during the growth period. When the flower stems are pulled out of the leaf cluster, the phosphorus and potassium Fertilizers are applied by 1 to 2 times.From May to August, Fertilizer can be applied every half month, and the concentration does not exceed 0.5 %.

6.Anti -disease

Common pests in shrimp ridges are anthracnose, soft rot, lobe blight, and scale insects. Excessive planting, poor ventilation, water disorders, or mechanical damage are susceptible.Reduce temperature and humidity, work for the final operation of the onset, and isolate and destroy.

precautions for shrimp ridge breeding

1,When maintaining shrimp ridge, it is necessary to trim the damaged parts in time to effectively increase air circulation and avoid the breeding of bacterial insect pests.

2,There are more rain in the rainy season. Do a good job of drainage in the soil to avoid rotting the roots caused by water accumulation.