1. How to design embedded closet

1. First of all, measure the size in advance, and decide how big the planned and designed closet is planned according to the size of the house area.

Unlike other furniture products, it is not directly placed, but embedded in the wall.Therefore, the problem of designing size is crucial, so that the closet can be used to get the best use and show the advantages.It is very worthy of saying that according to the advice of professionals, making embedded closets in the living room wall is a very good choice, which can make the effect of the closet to the greatest extent, and can also increase the beauty of the living room and strengthen the decorative effect.

2. Secondly, it should be designed for professionals to build professional decoration personnel.

Some people will choose to decorate themselves and build themselves. The fact is that for people who lack experience, designing closets is quite difficult, it is difficult to design beautiful and practical closets.Therefore, hiring professional designers is very helpful for designing novel, unique, and practical closet.Not only that, the price is not as expensive as people think.

(Embedded closet decoration renderings.

two,Embedded closet designstep

1. Wall cabinet: For the room (or the room of the entire wall as a wardrobe) in the structure of the structure, install a combined partition in the concave wall, and then install a closet door to become a beautiful and durable wall cabinetEssenceThe wall in the cabinet can be directly scanned with the inner wall paint or pasted with wallpaper.

2. Rail: The size of the orbital box of the upper part of the Wall cabinet should be guaranteed at 12 cm high and 9 cm wide.Like the curtain box, the rails are installed in the rail box to hang the sliding door on the track.

3. Plumb door: The golden size of the normal door is about 80 cm 200 cm. Under this structure, the door is relatively stable.If there is a height higher than 200 cm, or even higher, the sliding door is best to narrow the width of the door or make a few more sliding doors under the premise of keeping the area unchanged to keep the door stability and use safety.sex.The use of suspension sliding doors needs to be reinforced at the top. Generally, the inside of the large wooden structure sliding door also needs to be reinforced with Steel Structure, and then other production is taken outside.

1. How to install the rack on the wall

1. Prepare the tools, the most important thing is to prepare an impact drill.It should be noted here that according to the size of the expansion screws, choose the drill of the largest one.

2. First, the rack on the wall is compared with the approximate position, then take the height and the pore distance with the tape measure, and mark it with a pen.

3. Use the impact drill to punch the place where the mark is made. It should be noted that when punching, the hole eyes need to be slightly up towards it to avoid the rack tilted down because of gravity.

4. Then put the expansion screws in the hole, and fix it with a hammer.Different types of expansion screws are different. You can search the Internet online to find the specific one for you.

5. Insert the rack into the fixed screw, and complete it.

2. Principles of installation of racks on the wall

1. The installation of racks on the wall should follow the principle of convenience and practicality.When installing the rack, you must take into account the entire layout and daily life habits, such as installing the frame on the wall in the kitchen, and consider the place where the wall is installed on the stir -frying place.

2. The installation of racks on the wall should abide by the principle of saving space.The kitchen and bathrooms are relatively small in our family, so the installation of the shelf must save space and make reasonable use of our space.

3. The installation of racks on the wall should be classified clearly.There are many types of shelves on the wall, and different places with different positions in home are installed in different positions, so that they can "perform their duties" in order to make home life methodically.

3. Tips for installing racks on the wall

1. New masonry wall

Put the metal components in advance in the wall, set the grid plate, or stabb the eyes on the side of the thick plate, or the carpenters are fixed according to the component to make the decorative conclusion stable.

2. Decorative frame on the wall

First, the steel bars are inserted on the wall, the decorative frame is set, or the thick plate is stabbed into the eye, or the carpenters are fixed according to the component, and the decoration cannot be disassembled.

3. Heavy decorationTaste

The wall is fixed with a fixed -angle steel frame such as expansion bolts, a decorative frame, or a carpenter fixed according to the component. The corner steel frame is a bit ugly. It can place items such as books. The book can be used to cover the oblique support.

4, cantilever bracket

Purchasing the iron bracket of the product may be a dedicated fixed frame, the wall is eye -catching, and it can be fixed with plastic bolt or woody wedge and wood screws. The glass decoration frame can be used. The cost is slightly higher, but it is very beautiful and beautiful.

Yi Belle Full House Custom -Tang Feng Hanyun Series

Those who do not set up color, it is called the white drawing

Simplified lines with ink color lines

One stroke is full of wind

Dan Qingliao pen, elegant and elegant flowers

The ink dye is the scene, the frost and snow is boundless

Show of Yoshi Mountains and Sichuan is presented

The graceful picture jumps in front of you

Independence and prosperity, I am self -reliance

Style characteristics: fashion, modern Chinese style

Application material: Water Qu LiuBaiyan board black aluminum alloy edge door panel